Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
/*
|
|
|
|
* Various trivial helper wrappers around standard functions
|
|
|
|
*/
|
|
|
|
#include "cache.h"
|
2017-06-14 20:07:36 +02:00
|
|
|
#include "config.h"
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
|
2010-11-06 20:00:38 +01:00
|
|
|
static void do_nothing(size_t size)
|
2010-03-24 21:22:34 +01:00
|
|
|
{
|
|
|
|
}
|
|
|
|
|
2010-11-06 20:00:38 +01:00
|
|
|
static void (*try_to_free_routine)(size_t size) = do_nothing;
|
2010-03-24 21:22:34 +01:00
|
|
|
|
2014-08-16 05:08:02 +02:00
|
|
|
static int memory_limit_check(size_t size, int gentle)
|
2012-03-07 11:54:16 +01:00
|
|
|
{
|
2014-08-26 17:23:22 +02:00
|
|
|
static size_t limit = 0;
|
|
|
|
if (!limit) {
|
|
|
|
limit = git_env_ulong("GIT_ALLOC_LIMIT", 0);
|
|
|
|
if (!limit)
|
|
|
|
limit = SIZE_MAX;
|
2012-03-07 11:54:16 +01:00
|
|
|
}
|
2014-10-08 22:05:32 +02:00
|
|
|
if (size > limit) {
|
2014-08-16 05:08:02 +02:00
|
|
|
if (gentle) {
|
2014-10-08 22:05:32 +02:00
|
|
|
error("attempting to allocate %"PRIuMAX" over limit %"PRIuMAX,
|
|
|
|
(uintmax_t)size, (uintmax_t)limit);
|
2014-08-16 05:08:02 +02:00
|
|
|
return -1;
|
|
|
|
} else
|
2014-10-08 22:05:32 +02:00
|
|
|
die("attempting to allocate %"PRIuMAX" over limit %"PRIuMAX,
|
|
|
|
(uintmax_t)size, (uintmax_t)limit);
|
2014-08-16 05:08:02 +02:00
|
|
|
}
|
|
|
|
return 0;
|
2012-03-07 11:54:16 +01:00
|
|
|
}
|
|
|
|
|
2010-05-08 17:13:49 +02:00
|
|
|
try_to_free_t set_try_to_free_routine(try_to_free_t routine)
|
2010-03-24 21:22:34 +01:00
|
|
|
{
|
2010-05-08 17:13:49 +02:00
|
|
|
try_to_free_t old = try_to_free_routine;
|
2010-12-21 18:24:18 +01:00
|
|
|
if (!routine)
|
|
|
|
routine = do_nothing;
|
2010-05-08 17:13:49 +02:00
|
|
|
try_to_free_routine = routine;
|
|
|
|
return old;
|
2010-03-24 21:22:34 +01:00
|
|
|
}
|
|
|
|
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
char *xstrdup(const char *str)
|
|
|
|
{
|
|
|
|
char *ret = strdup(str);
|
|
|
|
if (!ret) {
|
2010-03-24 21:22:34 +01:00
|
|
|
try_to_free_routine(strlen(str) + 1);
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
ret = strdup(str);
|
|
|
|
if (!ret)
|
|
|
|
die("Out of memory, strdup failed");
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-08-16 05:08:02 +02:00
|
|
|
static void *do_xmalloc(size_t size, int gentle)
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
{
|
2012-03-07 11:54:16 +01:00
|
|
|
void *ret;
|
|
|
|
|
2014-08-16 05:08:02 +02:00
|
|
|
if (memory_limit_check(size, gentle))
|
|
|
|
return NULL;
|
2012-03-07 11:54:16 +01:00
|
|
|
ret = malloc(size);
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
if (!ret && !size)
|
|
|
|
ret = malloc(1);
|
|
|
|
if (!ret) {
|
2010-03-24 21:22:34 +01:00
|
|
|
try_to_free_routine(size);
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
ret = malloc(size);
|
|
|
|
if (!ret && !size)
|
|
|
|
ret = malloc(1);
|
2014-08-16 05:08:02 +02:00
|
|
|
if (!ret) {
|
|
|
|
if (!gentle)
|
|
|
|
die("Out of memory, malloc failed (tried to allocate %lu bytes)",
|
|
|
|
(unsigned long)size);
|
|
|
|
else {
|
|
|
|
error("Out of memory, malloc failed (tried to allocate %lu bytes)",
|
|
|
|
(unsigned long)size);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
}
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
}
|
|
|
|
#ifdef XMALLOC_POISON
|
|
|
|
memset(ret, 0xA5, size);
|
|
|
|
#endif
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-08-16 05:08:02 +02:00
|
|
|
void *xmalloc(size_t size)
|
|
|
|
{
|
|
|
|
return do_xmalloc(size, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void *do_xmallocz(size_t size, int gentle)
|
2010-01-26 19:24:12 +01:00
|
|
|
{
|
|
|
|
void *ret;
|
2014-08-16 05:08:02 +02:00
|
|
|
if (unsigned_add_overflows(size, 1)) {
|
|
|
|
if (gentle) {
|
|
|
|
error("Data too large to fit into virtual memory space.");
|
|
|
|
return NULL;
|
|
|
|
} else
|
|
|
|
die("Data too large to fit into virtual memory space.");
|
|
|
|
}
|
|
|
|
ret = do_xmalloc(size + 1, gentle);
|
|
|
|
if (ret)
|
|
|
|
((char*)ret)[size] = 0;
|
2010-01-26 19:24:12 +01:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-08-16 05:08:02 +02:00
|
|
|
void *xmallocz(size_t size)
|
|
|
|
{
|
|
|
|
return do_xmallocz(size, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void *xmallocz_gently(size_t size)
|
|
|
|
{
|
|
|
|
return do_xmallocz(size, 1);
|
|
|
|
}
|
|
|
|
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
/*
|
|
|
|
* xmemdupz() allocates (len + 1) bytes of memory, duplicates "len" bytes of
|
|
|
|
* "data" to the allocated memory, zero terminates the allocated memory,
|
|
|
|
* and returns a pointer to the allocated memory. If the allocation fails,
|
|
|
|
* the program dies.
|
|
|
|
*/
|
|
|
|
void *xmemdupz(const void *data, size_t len)
|
|
|
|
{
|
2010-01-26 19:24:12 +01:00
|
|
|
return memcpy(xmallocz(len), data, len);
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
char *xstrndup(const char *str, size_t len)
|
|
|
|
{
|
|
|
|
char *p = memchr(str, '\0', len);
|
|
|
|
return xmemdupz(str, p ? p - str : len);
|
|
|
|
}
|
|
|
|
|
|
|
|
void *xrealloc(void *ptr, size_t size)
|
|
|
|
{
|
2012-03-07 11:54:16 +01:00
|
|
|
void *ret;
|
|
|
|
|
2014-08-16 05:08:02 +02:00
|
|
|
memory_limit_check(size, 0);
|
2012-03-07 11:54:16 +01:00
|
|
|
ret = realloc(ptr, size);
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
if (!ret && !size)
|
|
|
|
ret = realloc(ptr, 1);
|
|
|
|
if (!ret) {
|
2010-03-24 21:22:34 +01:00
|
|
|
try_to_free_routine(size);
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
ret = realloc(ptr, size);
|
|
|
|
if (!ret && !size)
|
|
|
|
ret = realloc(ptr, 1);
|
|
|
|
if (!ret)
|
|
|
|
die("Out of memory, realloc failed");
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
void *xcalloc(size_t nmemb, size_t size)
|
|
|
|
{
|
2012-03-07 11:54:16 +01:00
|
|
|
void *ret;
|
|
|
|
|
2016-02-22 23:43:18 +01:00
|
|
|
if (unsigned_mult_overflows(nmemb, size))
|
|
|
|
die("data too large to fit into virtual memory space");
|
|
|
|
|
2014-08-16 05:08:02 +02:00
|
|
|
memory_limit_check(size * nmemb, 0);
|
2012-03-07 11:54:16 +01:00
|
|
|
ret = calloc(nmemb, size);
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
if (!ret && (!nmemb || !size))
|
|
|
|
ret = calloc(1, 1);
|
|
|
|
if (!ret) {
|
2010-03-24 21:22:34 +01:00
|
|
|
try_to_free_routine(nmemb * size);
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
ret = calloc(nmemb, size);
|
|
|
|
if (!ret && (!nmemb || !size))
|
|
|
|
ret = calloc(1, 1);
|
|
|
|
if (!ret)
|
|
|
|
die("Out of memory, calloc failed");
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
xread, xwrite: limit size of IO to 8MB
Checking out 2GB or more through an external filter (see test) fails
on Mac OS X 10.8.4 (12E55) for a 64-bit executable with:
error: read from external filter cat failed
error: cannot feed the input to external filter cat
error: cat died of signal 13
error: external filter cat failed 141
error: external filter cat failed
The reason is that read() immediately returns with EINVAL when asked
to read more than 2GB. According to POSIX [1], if the value of
nbyte passed to read() is greater than SSIZE_MAX, the result is
implementation-defined. The write function has the same restriction
[2]. Since OS X still supports running 32-bit executables, the
32-bit limit (SSIZE_MAX = INT_MAX = 2GB - 1) seems to be also
imposed on 64-bit executables under certain conditions. For write,
the problem has been addressed earlier [6c642a].
Address the problem for read() and write() differently, by limiting
size of IO chunks unconditionally on all platforms in xread() and
xwrite(). Large chunks only cause problems, like causing latencies
when killing the process, even if OS X was not buggy. Doing IO in
reasonably sized smaller chunks should have no negative impact on
performance.
The compat wrapper clipped_write() introduced earlier [6c642a] is
not needed anymore. It will be reverted in a separate commit. The
new test catches read and write problems.
Note that 'git add' exits with 0 even if it prints filtering errors
to stderr. The test, therefore, checks stderr. 'git add' should
probably be changed (sometime in another commit) to exit with
nonzero if filtering fails. The test could then be changed to use
test_must_fail.
Thanks to the following people for suggestions and testing:
Johannes Sixt <j6t@kdbg.org>
John Keeping <john@keeping.me.uk>
Jonathan Nieder <jrnieder@gmail.com>
Kyle J. McKay <mackyle@gmail.com>
Linus Torvalds <torvalds@linux-foundation.org>
Torsten Bögershausen <tboegi@web.de>
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
[2] http://pubs.opengroup.org/onlinepubs/009695399/functions/write.html
[6c642a] commit 6c642a878688adf46b226903858b53e2d31ac5c3
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-20 08:43:54 +02:00
|
|
|
/*
|
|
|
|
* Limit size of IO chunks, because huge chunks only cause pain. OS X
|
|
|
|
* 64-bit is buggy, returning EINVAL if len >= INT_MAX; and even in
|
2013-11-12 16:17:42 +01:00
|
|
|
* the absence of bugs, large chunks can result in bad latencies when
|
xread, xwrite: limit size of IO to 8MB
Checking out 2GB or more through an external filter (see test) fails
on Mac OS X 10.8.4 (12E55) for a 64-bit executable with:
error: read from external filter cat failed
error: cannot feed the input to external filter cat
error: cat died of signal 13
error: external filter cat failed 141
error: external filter cat failed
The reason is that read() immediately returns with EINVAL when asked
to read more than 2GB. According to POSIX [1], if the value of
nbyte passed to read() is greater than SSIZE_MAX, the result is
implementation-defined. The write function has the same restriction
[2]. Since OS X still supports running 32-bit executables, the
32-bit limit (SSIZE_MAX = INT_MAX = 2GB - 1) seems to be also
imposed on 64-bit executables under certain conditions. For write,
the problem has been addressed earlier [6c642a].
Address the problem for read() and write() differently, by limiting
size of IO chunks unconditionally on all platforms in xread() and
xwrite(). Large chunks only cause problems, like causing latencies
when killing the process, even if OS X was not buggy. Doing IO in
reasonably sized smaller chunks should have no negative impact on
performance.
The compat wrapper clipped_write() introduced earlier [6c642a] is
not needed anymore. It will be reverted in a separate commit. The
new test catches read and write problems.
Note that 'git add' exits with 0 even if it prints filtering errors
to stderr. The test, therefore, checks stderr. 'git add' should
probably be changed (sometime in another commit) to exit with
nonzero if filtering fails. The test could then be changed to use
test_must_fail.
Thanks to the following people for suggestions and testing:
Johannes Sixt <j6t@kdbg.org>
John Keeping <john@keeping.me.uk>
Jonathan Nieder <jrnieder@gmail.com>
Kyle J. McKay <mackyle@gmail.com>
Linus Torvalds <torvalds@linux-foundation.org>
Torsten Bögershausen <tboegi@web.de>
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
[2] http://pubs.opengroup.org/onlinepubs/009695399/functions/write.html
[6c642a] commit 6c642a878688adf46b226903858b53e2d31ac5c3
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-20 08:43:54 +02:00
|
|
|
* you decide to kill the process.
|
2015-02-11 22:13:10 +01:00
|
|
|
*
|
|
|
|
* We pick 8 MiB as our default, but if the platform defines SSIZE_MAX
|
|
|
|
* that is smaller than that, clip it to SSIZE_MAX, as a call to
|
|
|
|
* read(2) or write(2) larger than that is allowed to fail. As the last
|
|
|
|
* resort, we allow a port to pass via CFLAGS e.g. "-DMAX_IO_SIZE=value"
|
|
|
|
* to override this, if the definition of SSIZE_MAX given by the platform
|
|
|
|
* is broken.
|
xread, xwrite: limit size of IO to 8MB
Checking out 2GB or more through an external filter (see test) fails
on Mac OS X 10.8.4 (12E55) for a 64-bit executable with:
error: read from external filter cat failed
error: cannot feed the input to external filter cat
error: cat died of signal 13
error: external filter cat failed 141
error: external filter cat failed
The reason is that read() immediately returns with EINVAL when asked
to read more than 2GB. According to POSIX [1], if the value of
nbyte passed to read() is greater than SSIZE_MAX, the result is
implementation-defined. The write function has the same restriction
[2]. Since OS X still supports running 32-bit executables, the
32-bit limit (SSIZE_MAX = INT_MAX = 2GB - 1) seems to be also
imposed on 64-bit executables under certain conditions. For write,
the problem has been addressed earlier [6c642a].
Address the problem for read() and write() differently, by limiting
size of IO chunks unconditionally on all platforms in xread() and
xwrite(). Large chunks only cause problems, like causing latencies
when killing the process, even if OS X was not buggy. Doing IO in
reasonably sized smaller chunks should have no negative impact on
performance.
The compat wrapper clipped_write() introduced earlier [6c642a] is
not needed anymore. It will be reverted in a separate commit. The
new test catches read and write problems.
Note that 'git add' exits with 0 even if it prints filtering errors
to stderr. The test, therefore, checks stderr. 'git add' should
probably be changed (sometime in another commit) to exit with
nonzero if filtering fails. The test could then be changed to use
test_must_fail.
Thanks to the following people for suggestions and testing:
Johannes Sixt <j6t@kdbg.org>
John Keeping <john@keeping.me.uk>
Jonathan Nieder <jrnieder@gmail.com>
Kyle J. McKay <mackyle@gmail.com>
Linus Torvalds <torvalds@linux-foundation.org>
Torsten Bögershausen <tboegi@web.de>
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
[2] http://pubs.opengroup.org/onlinepubs/009695399/functions/write.html
[6c642a] commit 6c642a878688adf46b226903858b53e2d31ac5c3
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-20 08:43:54 +02:00
|
|
|
*/
|
2015-02-11 22:13:10 +01:00
|
|
|
#ifndef MAX_IO_SIZE
|
|
|
|
# define MAX_IO_SIZE_DEFAULT (8*1024*1024)
|
|
|
|
# if defined(SSIZE_MAX) && (SSIZE_MAX < MAX_IO_SIZE_DEFAULT)
|
|
|
|
# define MAX_IO_SIZE SSIZE_MAX
|
|
|
|
# else
|
|
|
|
# define MAX_IO_SIZE MAX_IO_SIZE_DEFAULT
|
|
|
|
# endif
|
|
|
|
#endif
|
xread, xwrite: limit size of IO to 8MB
Checking out 2GB or more through an external filter (see test) fails
on Mac OS X 10.8.4 (12E55) for a 64-bit executable with:
error: read from external filter cat failed
error: cannot feed the input to external filter cat
error: cat died of signal 13
error: external filter cat failed 141
error: external filter cat failed
The reason is that read() immediately returns with EINVAL when asked
to read more than 2GB. According to POSIX [1], if the value of
nbyte passed to read() is greater than SSIZE_MAX, the result is
implementation-defined. The write function has the same restriction
[2]. Since OS X still supports running 32-bit executables, the
32-bit limit (SSIZE_MAX = INT_MAX = 2GB - 1) seems to be also
imposed on 64-bit executables under certain conditions. For write,
the problem has been addressed earlier [6c642a].
Address the problem for read() and write() differently, by limiting
size of IO chunks unconditionally on all platforms in xread() and
xwrite(). Large chunks only cause problems, like causing latencies
when killing the process, even if OS X was not buggy. Doing IO in
reasonably sized smaller chunks should have no negative impact on
performance.
The compat wrapper clipped_write() introduced earlier [6c642a] is
not needed anymore. It will be reverted in a separate commit. The
new test catches read and write problems.
Note that 'git add' exits with 0 even if it prints filtering errors
to stderr. The test, therefore, checks stderr. 'git add' should
probably be changed (sometime in another commit) to exit with
nonzero if filtering fails. The test could then be changed to use
test_must_fail.
Thanks to the following people for suggestions and testing:
Johannes Sixt <j6t@kdbg.org>
John Keeping <john@keeping.me.uk>
Jonathan Nieder <jrnieder@gmail.com>
Kyle J. McKay <mackyle@gmail.com>
Linus Torvalds <torvalds@linux-foundation.org>
Torsten Bögershausen <tboegi@web.de>
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
[2] http://pubs.opengroup.org/onlinepubs/009695399/functions/write.html
[6c642a] commit 6c642a878688adf46b226903858b53e2d31ac5c3
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-20 08:43:54 +02:00
|
|
|
|
2015-08-04 15:51:22 +02:00
|
|
|
/**
|
|
|
|
* xopen() is the same as open(), but it die()s if the open() fails.
|
|
|
|
*/
|
|
|
|
int xopen(const char *path, int oflag, ...)
|
|
|
|
{
|
|
|
|
mode_t mode = 0;
|
|
|
|
va_list ap;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* va_arg() will have undefined behavior if the specified type is not
|
|
|
|
* compatible with the argument type. Since integers are promoted to
|
|
|
|
* ints, we fetch the next argument as an int, and then cast it to a
|
|
|
|
* mode_t to avoid undefined behavior.
|
|
|
|
*/
|
|
|
|
va_start(ap, oflag);
|
|
|
|
if (oflag & O_CREAT)
|
|
|
|
mode = va_arg(ap, int);
|
|
|
|
va_end(ap);
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
int fd = open(path, oflag, mode);
|
|
|
|
if (fd >= 0)
|
|
|
|
return fd;
|
|
|
|
if (errno == EINTR)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if ((oflag & O_RDWR) == O_RDWR)
|
|
|
|
die_errno(_("could not open '%s' for reading and writing"), path);
|
|
|
|
else if ((oflag & O_WRONLY) == O_WRONLY)
|
|
|
|
die_errno(_("could not open '%s' for writing"), path);
|
|
|
|
else
|
|
|
|
die_errno(_("could not open '%s' for reading"), path);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2016-07-10 10:20:46 +02:00
|
|
|
static int handle_nonblock(int fd, short poll_events, int err)
|
|
|
|
{
|
|
|
|
struct pollfd pfd;
|
|
|
|
|
|
|
|
if (err != EAGAIN && err != EWOULDBLOCK)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
pfd.fd = fd;
|
|
|
|
pfd.events = poll_events;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* no need to check for errors, here;
|
|
|
|
* a subsequent read/write will detect unrecoverable errors
|
|
|
|
*/
|
|
|
|
poll(&pfd, 1, -1);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
/*
|
|
|
|
* xread() is the same a read(), but it automatically restarts read()
|
|
|
|
* operations with a recoverable error (EAGAIN and EINTR). xread()
|
|
|
|
* DOES NOT GUARANTEE that "len" bytes is read even if the data is available.
|
|
|
|
*/
|
|
|
|
ssize_t xread(int fd, void *buf, size_t len)
|
|
|
|
{
|
|
|
|
ssize_t nr;
|
xread, xwrite: limit size of IO to 8MB
Checking out 2GB or more through an external filter (see test) fails
on Mac OS X 10.8.4 (12E55) for a 64-bit executable with:
error: read from external filter cat failed
error: cannot feed the input to external filter cat
error: cat died of signal 13
error: external filter cat failed 141
error: external filter cat failed
The reason is that read() immediately returns with EINVAL when asked
to read more than 2GB. According to POSIX [1], if the value of
nbyte passed to read() is greater than SSIZE_MAX, the result is
implementation-defined. The write function has the same restriction
[2]. Since OS X still supports running 32-bit executables, the
32-bit limit (SSIZE_MAX = INT_MAX = 2GB - 1) seems to be also
imposed on 64-bit executables under certain conditions. For write,
the problem has been addressed earlier [6c642a].
Address the problem for read() and write() differently, by limiting
size of IO chunks unconditionally on all platforms in xread() and
xwrite(). Large chunks only cause problems, like causing latencies
when killing the process, even if OS X was not buggy. Doing IO in
reasonably sized smaller chunks should have no negative impact on
performance.
The compat wrapper clipped_write() introduced earlier [6c642a] is
not needed anymore. It will be reverted in a separate commit. The
new test catches read and write problems.
Note that 'git add' exits with 0 even if it prints filtering errors
to stderr. The test, therefore, checks stderr. 'git add' should
probably be changed (sometime in another commit) to exit with
nonzero if filtering fails. The test could then be changed to use
test_must_fail.
Thanks to the following people for suggestions and testing:
Johannes Sixt <j6t@kdbg.org>
John Keeping <john@keeping.me.uk>
Jonathan Nieder <jrnieder@gmail.com>
Kyle J. McKay <mackyle@gmail.com>
Linus Torvalds <torvalds@linux-foundation.org>
Torsten Bögershausen <tboegi@web.de>
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
[2] http://pubs.opengroup.org/onlinepubs/009695399/functions/write.html
[6c642a] commit 6c642a878688adf46b226903858b53e2d31ac5c3
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-20 08:43:54 +02:00
|
|
|
if (len > MAX_IO_SIZE)
|
|
|
|
len = MAX_IO_SIZE;
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
while (1) {
|
|
|
|
nr = read(fd, buf, len);
|
2015-12-16 01:04:07 +01:00
|
|
|
if (nr < 0) {
|
|
|
|
if (errno == EINTR)
|
|
|
|
continue;
|
2016-07-10 10:20:46 +02:00
|
|
|
if (handle_nonblock(fd, POLLIN, errno))
|
2016-06-27 05:56:35 +02:00
|
|
|
continue;
|
2015-12-16 01:04:07 +01:00
|
|
|
}
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
return nr;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* xwrite() is the same a write(), but it automatically restarts write()
|
|
|
|
* operations with a recoverable error (EAGAIN and EINTR). xwrite() DOES NOT
|
|
|
|
* GUARANTEE that "len" bytes is written even if the operation is successful.
|
|
|
|
*/
|
|
|
|
ssize_t xwrite(int fd, const void *buf, size_t len)
|
|
|
|
{
|
|
|
|
ssize_t nr;
|
xread, xwrite: limit size of IO to 8MB
Checking out 2GB or more through an external filter (see test) fails
on Mac OS X 10.8.4 (12E55) for a 64-bit executable with:
error: read from external filter cat failed
error: cannot feed the input to external filter cat
error: cat died of signal 13
error: external filter cat failed 141
error: external filter cat failed
The reason is that read() immediately returns with EINVAL when asked
to read more than 2GB. According to POSIX [1], if the value of
nbyte passed to read() is greater than SSIZE_MAX, the result is
implementation-defined. The write function has the same restriction
[2]. Since OS X still supports running 32-bit executables, the
32-bit limit (SSIZE_MAX = INT_MAX = 2GB - 1) seems to be also
imposed on 64-bit executables under certain conditions. For write,
the problem has been addressed earlier [6c642a].
Address the problem for read() and write() differently, by limiting
size of IO chunks unconditionally on all platforms in xread() and
xwrite(). Large chunks only cause problems, like causing latencies
when killing the process, even if OS X was not buggy. Doing IO in
reasonably sized smaller chunks should have no negative impact on
performance.
The compat wrapper clipped_write() introduced earlier [6c642a] is
not needed anymore. It will be reverted in a separate commit. The
new test catches read and write problems.
Note that 'git add' exits with 0 even if it prints filtering errors
to stderr. The test, therefore, checks stderr. 'git add' should
probably be changed (sometime in another commit) to exit with
nonzero if filtering fails. The test could then be changed to use
test_must_fail.
Thanks to the following people for suggestions and testing:
Johannes Sixt <j6t@kdbg.org>
John Keeping <john@keeping.me.uk>
Jonathan Nieder <jrnieder@gmail.com>
Kyle J. McKay <mackyle@gmail.com>
Linus Torvalds <torvalds@linux-foundation.org>
Torsten Bögershausen <tboegi@web.de>
[1] http://pubs.opengroup.org/onlinepubs/009695399/functions/read.html
[2] http://pubs.opengroup.org/onlinepubs/009695399/functions/write.html
[6c642a] commit 6c642a878688adf46b226903858b53e2d31ac5c3
compate/clipped-write.c: large write(2) fails on Mac OS X/XNU
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-20 08:43:54 +02:00
|
|
|
if (len > MAX_IO_SIZE)
|
|
|
|
len = MAX_IO_SIZE;
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
while (1) {
|
|
|
|
nr = write(fd, buf, len);
|
2016-06-27 01:21:12 +02:00
|
|
|
if (nr < 0) {
|
|
|
|
if (errno == EINTR)
|
|
|
|
continue;
|
2016-07-10 10:20:46 +02:00
|
|
|
if (handle_nonblock(fd, POLLOUT, errno))
|
2016-06-27 01:21:12 +02:00
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
2014-04-10 20:54:12 +02:00
|
|
|
return nr;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* xpread() is the same as pread(), but it automatically restarts pread()
|
|
|
|
* operations with a recoverable error (EAGAIN and EINTR). xpread() DOES
|
|
|
|
* NOT GUARANTEE that "len" bytes is read even if the data is available.
|
|
|
|
*/
|
|
|
|
ssize_t xpread(int fd, void *buf, size_t len, off_t offset)
|
|
|
|
{
|
|
|
|
ssize_t nr;
|
|
|
|
if (len > MAX_IO_SIZE)
|
|
|
|
len = MAX_IO_SIZE;
|
|
|
|
while (1) {
|
|
|
|
nr = pread(fd, buf, len, offset);
|
|
|
|
if ((nr < 0) && (errno == EAGAIN || errno == EINTR))
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
continue;
|
|
|
|
return nr;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2008-07-21 01:13:05 +02:00
|
|
|
ssize_t read_in_full(int fd, void *buf, size_t count)
|
|
|
|
{
|
|
|
|
char *p = buf;
|
|
|
|
ssize_t total = 0;
|
|
|
|
|
|
|
|
while (count > 0) {
|
|
|
|
ssize_t loaded = xread(fd, p, count);
|
read_in_full: always report errors
The read_in_full function repeatedly calls read() to fill a
buffer. If the first read() returns an error, we notify the
caller by returning the error. However, if we read some data
and then get an error on a subsequent read, we simply return
the amount of data that we did read, and the caller is
unaware of the error.
This makes the tradeoff that seeing the partial data is more
important than the fact that an error occurred. In practice,
this is generally not the case; we care more if an error
occurred, and should throw away any partial data.
I audited the current callers. In most cases, this will make
no difference at all, as they do:
if (read_in_full(fd, buf, size) != size)
error("short read");
However, it will help in a few cases:
1. In sha1_file.c:index_stream, we would fail to notice
errors in the incoming stream.
2. When reading symbolic refs in resolve_ref, we would
fail to notice errors and potentially use a truncated
ref name.
3. In various places, we will get much better error
messages. For example, callers of safe_read would
erroneously print "the remote end hung up unexpectedly"
instead of showing the read error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-26 18:30:27 +02:00
|
|
|
if (loaded < 0)
|
|
|
|
return -1;
|
|
|
|
if (loaded == 0)
|
|
|
|
return total;
|
2008-07-21 01:13:05 +02:00
|
|
|
count -= loaded;
|
|
|
|
p += loaded;
|
|
|
|
total += loaded;
|
|
|
|
}
|
|
|
|
|
|
|
|
return total;
|
|
|
|
}
|
|
|
|
|
|
|
|
ssize_t write_in_full(int fd, const void *buf, size_t count)
|
|
|
|
{
|
|
|
|
const char *p = buf;
|
|
|
|
ssize_t total = 0;
|
|
|
|
|
|
|
|
while (count > 0) {
|
|
|
|
ssize_t written = xwrite(fd, p, count);
|
|
|
|
if (written < 0)
|
|
|
|
return -1;
|
|
|
|
if (!written) {
|
|
|
|
errno = ENOSPC;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
count -= written;
|
|
|
|
p += written;
|
|
|
|
total += written;
|
|
|
|
}
|
|
|
|
|
|
|
|
return total;
|
|
|
|
}
|
|
|
|
|
2014-04-10 20:31:21 +02:00
|
|
|
ssize_t pread_in_full(int fd, void *buf, size_t count, off_t offset)
|
|
|
|
{
|
|
|
|
char *p = buf;
|
|
|
|
ssize_t total = 0;
|
|
|
|
|
|
|
|
while (count > 0) {
|
|
|
|
ssize_t loaded = xpread(fd, p, count, offset);
|
|
|
|
if (loaded < 0)
|
|
|
|
return -1;
|
|
|
|
if (loaded == 0)
|
|
|
|
return total;
|
|
|
|
count -= loaded;
|
|
|
|
p += loaded;
|
|
|
|
total += loaded;
|
|
|
|
offset += loaded;
|
|
|
|
}
|
|
|
|
|
|
|
|
return total;
|
|
|
|
}
|
|
|
|
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
int xdup(int fd)
|
|
|
|
{
|
|
|
|
int ret = dup(fd);
|
|
|
|
if (ret < 0)
|
2009-06-27 17:58:46 +02:00
|
|
|
die_errno("dup failed");
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2015-08-04 15:51:23 +02:00
|
|
|
/**
|
|
|
|
* xfopen() is the same as fopen(), but it die()s if the fopen() fails.
|
|
|
|
*/
|
|
|
|
FILE *xfopen(const char *path, const char *mode)
|
|
|
|
{
|
|
|
|
for (;;) {
|
|
|
|
FILE *fp = fopen(path, mode);
|
|
|
|
if (fp)
|
|
|
|
return fp;
|
|
|
|
if (errno == EINTR)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
if (*mode && mode[1] == '+')
|
|
|
|
die_errno(_("could not open '%s' for reading and writing"), path);
|
|
|
|
else if (*mode == 'w' || *mode == 'a')
|
|
|
|
die_errno(_("could not open '%s' for writing"), path);
|
|
|
|
else
|
|
|
|
die_errno(_("could not open '%s' for reading"), path);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
FILE *xfdopen(int fd, const char *mode)
|
|
|
|
{
|
|
|
|
FILE *stream = fdopen(fd, mode);
|
|
|
|
if (stream == NULL)
|
2009-06-27 17:58:46 +02:00
|
|
|
die_errno("Out of memory? fdopen failed");
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
return stream;
|
|
|
|
}
|
|
|
|
|
2016-01-06 14:09:43 +01:00
|
|
|
FILE *fopen_for_writing(const char *path)
|
|
|
|
{
|
|
|
|
FILE *ret = fopen(path, "w");
|
|
|
|
|
|
|
|
if (!ret && errno == EPERM) {
|
|
|
|
if (!unlink(path))
|
|
|
|
ret = fopen(path, "w");
|
|
|
|
else
|
|
|
|
errno = EPERM;
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2017-05-08 12:40:37 +02:00
|
|
|
static void warn_on_inaccessible(const char *path)
|
|
|
|
{
|
|
|
|
warning_errno(_("unable to access '%s'"), path);
|
|
|
|
}
|
|
|
|
|
2017-05-03 12:16:49 +02:00
|
|
|
int warn_on_fopen_errors(const char *path)
|
|
|
|
{
|
|
|
|
if (errno != ENOENT && errno != ENOTDIR) {
|
|
|
|
warn_on_inaccessible(path);
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2017-05-03 12:16:50 +02:00
|
|
|
FILE *fopen_or_warn(const char *path, const char *mode)
|
|
|
|
{
|
|
|
|
FILE *fp = fopen(path, mode);
|
|
|
|
|
|
|
|
if (fp)
|
|
|
|
return fp;
|
|
|
|
|
|
|
|
warn_on_fopen_errors(path);
|
|
|
|
return NULL;
|
|
|
|
}
|
|
|
|
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
int xmkstemp(char *template)
|
|
|
|
{
|
|
|
|
int fd;
|
2010-12-18 22:28:00 +01:00
|
|
|
char origtemplate[PATH_MAX];
|
|
|
|
strlcpy(origtemplate, template, sizeof(origtemplate));
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
|
|
|
|
fd = mkstemp(template);
|
2010-12-18 22:28:00 +01:00
|
|
|
if (fd < 0) {
|
|
|
|
int saved_errno = errno;
|
|
|
|
const char *nonrelative_template;
|
|
|
|
|
2012-12-18 21:51:35 +01:00
|
|
|
if (strlen(template) != strlen(origtemplate))
|
2010-12-18 22:28:00 +01:00
|
|
|
template = origtemplate;
|
|
|
|
|
2011-03-17 12:26:46 +01:00
|
|
|
nonrelative_template = absolute_path(template);
|
2010-12-18 22:28:00 +01:00
|
|
|
errno = saved_errno;
|
|
|
|
die_errno("Unable to create temporary file '%s'",
|
|
|
|
nonrelative_template);
|
|
|
|
}
|
Shrink the git binary a bit by avoiding unnecessary inline functions
So I was looking at the disgusting size of the git binary, and even with
the debugging removed, and using -Os instead of -O2, the size of the text
section was pretty high. In this day and age I guess almost a megabyte of
text isn't really all that surprising, but it still doesn't exactly make
me think "lean and mean".
With -Os, a surprising amount of text space is wasted on inline functions
that end up just being replicated multiple times, and where performance
really isn't a valid reason to inline them. In particular, the trivial
wrapper functions like "xmalloc()" are used _everywhere_, and making them
inline just duplicates the text (and the string we use to 'die()' on
failure) unnecessarily.
So this just moves them into a "wrapper.c" file, getting rid of a tiny bit
of unnecessary bloat. The following numbers are both with "CFLAGS=-Os":
Before:
[torvalds@woody git]$ size git
text data bss dec hex filename
700460 15160 292184 1007804 f60bc git
After:
[torvalds@woody git]$ size git
text data bss dec hex filename
670540 15160 292184 977884 eebdc git
so it saves almost 30k of text-space (it actually saves more than that
with the default -O2, but I don't think that's necessarily a very relevant
number from a "try to shrink git" standpoint).
It might conceivably have a performance impact, but none of this should be
_that_ performance critical. The real cost is not generally in the wrapper
anyway, but in the code it wraps (ie the cost of "xread()" is all in the
read itself, not in the trivial wrapping of it).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-22 21:19:25 +02:00
|
|
|
return fd;
|
|
|
|
}
|
2009-01-08 04:54:47 +01:00
|
|
|
|
2010-11-06 12:46:31 +01:00
|
|
|
/* Adapted from libiberty's mkstemp.c. */
|
|
|
|
|
|
|
|
#undef TMP_MAX
|
|
|
|
#define TMP_MAX 16384
|
|
|
|
|
|
|
|
int git_mkstemps_mode(char *pattern, int suffix_len, int mode)
|
|
|
|
{
|
|
|
|
static const char letters[] =
|
|
|
|
"abcdefghijklmnopqrstuvwxyz"
|
|
|
|
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
|
|
|
|
"0123456789";
|
|
|
|
static const int num_letters = 62;
|
|
|
|
uint64_t value;
|
|
|
|
struct timeval tv;
|
|
|
|
char *template;
|
|
|
|
size_t len;
|
|
|
|
int fd, count;
|
|
|
|
|
|
|
|
len = strlen(pattern);
|
|
|
|
|
|
|
|
if (len < 6 + suffix_len) {
|
|
|
|
errno = EINVAL;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (strncmp(&pattern[len - 6 - suffix_len], "XXXXXX", 6)) {
|
|
|
|
errno = EINVAL;
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Replace pattern's XXXXXX characters with randomness.
|
|
|
|
* Try TMP_MAX different filenames.
|
|
|
|
*/
|
|
|
|
gettimeofday(&tv, NULL);
|
|
|
|
value = ((size_t)(tv.tv_usec << 16)) ^ tv.tv_sec ^ getpid();
|
|
|
|
template = &pattern[len - 6 - suffix_len];
|
|
|
|
for (count = 0; count < TMP_MAX; ++count) {
|
|
|
|
uint64_t v = value;
|
|
|
|
/* Fill in the random bits. */
|
|
|
|
template[0] = letters[v % num_letters]; v /= num_letters;
|
|
|
|
template[1] = letters[v % num_letters]; v /= num_letters;
|
|
|
|
template[2] = letters[v % num_letters]; v /= num_letters;
|
|
|
|
template[3] = letters[v % num_letters]; v /= num_letters;
|
|
|
|
template[4] = letters[v % num_letters]; v /= num_letters;
|
|
|
|
template[5] = letters[v % num_letters]; v /= num_letters;
|
|
|
|
|
|
|
|
fd = open(pattern, O_CREAT | O_EXCL | O_RDWR, mode);
|
2013-07-12 10:58:35 +02:00
|
|
|
if (fd >= 0)
|
2010-11-06 12:46:31 +01:00
|
|
|
return fd;
|
|
|
|
/*
|
|
|
|
* Fatal error (EPERM, ENOSPC etc).
|
|
|
|
* It doesn't make sense to loop.
|
|
|
|
*/
|
|
|
|
if (errno != EEXIST)
|
|
|
|
break;
|
|
|
|
/*
|
|
|
|
* This is a random value. It is only necessary that
|
|
|
|
* the next TMP_MAX values generated by adding 7777 to
|
|
|
|
* VALUE are different with (module 2^32).
|
|
|
|
*/
|
|
|
|
value += 7777;
|
|
|
|
}
|
|
|
|
/* We return the null string if we can't find a unique file name. */
|
|
|
|
pattern[0] = '\0';
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
int git_mkstemp_mode(char *pattern, int mode)
|
|
|
|
{
|
|
|
|
/* mkstemp is just mkstemps with no suffix */
|
|
|
|
return git_mkstemps_mode(pattern, 0, mode);
|
|
|
|
}
|
|
|
|
|
2010-02-22 23:32:13 +01:00
|
|
|
int xmkstemp_mode(char *template, int mode)
|
|
|
|
{
|
|
|
|
int fd;
|
2010-12-18 22:28:00 +01:00
|
|
|
char origtemplate[PATH_MAX];
|
|
|
|
strlcpy(origtemplate, template, sizeof(origtemplate));
|
2010-02-22 23:32:13 +01:00
|
|
|
|
|
|
|
fd = git_mkstemp_mode(template, mode);
|
2010-12-18 22:28:00 +01:00
|
|
|
if (fd < 0) {
|
|
|
|
int saved_errno = errno;
|
|
|
|
const char *nonrelative_template;
|
|
|
|
|
|
|
|
if (!template[0])
|
|
|
|
template = origtemplate;
|
|
|
|
|
2011-03-17 12:26:46 +01:00
|
|
|
nonrelative_template = absolute_path(template);
|
2010-12-18 22:28:00 +01:00
|
|
|
errno = saved_errno;
|
|
|
|
die_errno("Unable to create temporary file '%s'",
|
|
|
|
nonrelative_template);
|
|
|
|
}
|
2010-02-22 23:32:13 +01:00
|
|
|
return fd;
|
|
|
|
}
|
|
|
|
|
2010-03-26 16:25:32 +01:00
|
|
|
static int warn_if_unremovable(const char *op, const char *file, int rc)
|
2009-04-29 23:21:46 +02:00
|
|
|
{
|
2014-07-16 20:01:18 +02:00
|
|
|
int err;
|
|
|
|
if (!rc || errno == ENOENT)
|
|
|
|
return 0;
|
|
|
|
err = errno;
|
2016-05-08 11:48:01 +02:00
|
|
|
warning_errno("unable to %s %s", op, file);
|
2014-07-16 20:01:18 +02:00
|
|
|
errno = err;
|
2009-04-29 23:21:46 +02:00
|
|
|
return rc;
|
|
|
|
}
|
|
|
|
|
2014-07-16 20:20:36 +02:00
|
|
|
int unlink_or_msg(const char *file, struct strbuf *err)
|
|
|
|
{
|
|
|
|
int rc = unlink(file);
|
|
|
|
|
|
|
|
assert(err);
|
|
|
|
|
|
|
|
if (!rc || errno == ENOENT)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
strbuf_addf(err, "unable to unlink %s: %s",
|
|
|
|
file, strerror(errno));
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
2010-03-26 16:25:32 +01:00
|
|
|
int unlink_or_warn(const char *file)
|
|
|
|
{
|
|
|
|
return warn_if_unremovable("unlink", file, unlink(file));
|
|
|
|
}
|
2010-03-26 16:25:33 +01:00
|
|
|
|
|
|
|
int rmdir_or_warn(const char *file)
|
|
|
|
{
|
|
|
|
return warn_if_unremovable("rmdir", file, rmdir(file));
|
|
|
|
}
|
2010-03-26 16:25:34 +01:00
|
|
|
|
|
|
|
int remove_or_warn(unsigned int mode, const char *file)
|
|
|
|
{
|
|
|
|
return S_ISGITLINK(mode) ? rmdir_or_warn(file) : unlink_or_warn(file);
|
|
|
|
}
|
2012-05-22 01:10:20 +02:00
|
|
|
|
config: allow inaccessible configuration under $HOME
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12 23:03:18 +02:00
|
|
|
static int access_error_is_ok(int err, unsigned flag)
|
|
|
|
{
|
2017-05-30 02:23:33 +02:00
|
|
|
return (is_missing_file_error(err) ||
|
|
|
|
((flag & ACCESS_EACCES_OK) && err == EACCES));
|
config: allow inaccessible configuration under $HOME
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12 23:03:18 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
int access_or_warn(const char *path, int mode, unsigned flag)
|
2012-08-21 08:10:59 +02:00
|
|
|
{
|
|
|
|
int ret = access(path, mode);
|
config: allow inaccessible configuration under $HOME
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12 23:03:18 +02:00
|
|
|
if (ret && !access_error_is_ok(errno, flag))
|
2012-08-21 23:52:07 +02:00
|
|
|
warn_on_inaccessible(path);
|
2012-08-21 08:10:59 +02:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
config: allow inaccessible configuration under $HOME
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12 23:03:18 +02:00
|
|
|
int access_or_die(const char *path, int mode, unsigned flag)
|
2012-10-14 02:04:02 +02:00
|
|
|
{
|
|
|
|
int ret = access(path, mode);
|
config: allow inaccessible configuration under $HOME
The changes v1.7.12.1~2^2~4 (config: warn on inaccessible files,
2012-08-21) and v1.8.1.1~22^2~2 (config: treat user and xdg config
permission problems as errors, 2012-10-13) were intended to prevent
important configuration (think "[transfer] fsckobjects") from being
ignored when the configuration is unintentionally unreadable (for
example with EIO on a flaky filesystem, or with ENOMEM due to a DoS
attack). Usually ~/.gitconfig and ~/.config/git are readable by the
current user, and if they aren't then it would be easy to fix those
permissions, so the damage from adding this check should have been
minimal.
Unfortunately the access() check often trips when git is being run as
a server. A daemon (such as inetd or git-daemon) starts as "root",
creates a listening socket, and then drops privileges, meaning that
when git commands are invoked they cannot access $HOME and die with
fatal: unable to access '/root/.config/git/config': Permission denied
Any patch to fix this would have one of three problems:
1. We annoy sysadmins who need to take an extra step to handle HOME
when dropping privileges (the current behavior, or any other
proposal that they have to opt into).
2. We annoy sysadmins who want to set HOME when dropping privileges,
either by making what they want to do impossible, or making them
set an extra variable or option to accomplish what used to work
(e.g., a patch to git-daemon to set HOME when --user is passed).
3. We loosen the check, so some cases which might be noteworthy are
not caught.
This patch is of type (3).
Treat user and xdg configuration that are inaccessible due to
permissions (EACCES) as though no user configuration was provided at
all.
An alternative method would be to check if $HOME is readable, but that
would not help in cases where the user who dropped privileges had a
globally readable HOME with only .config or .gitconfig being private.
This does not change the behavior when /etc/gitconfig or .git/config
is unreadable (since those are more serious configuration errors),
nor when ~/.gitconfig or ~/.config/git is unreadable due to problems
other than permissions.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-12 23:03:18 +02:00
|
|
|
if (ret && !access_error_is_ok(errno, flag))
|
2012-10-14 02:04:02 +02:00
|
|
|
die_errno(_("unable to access '%s'"), path);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-07-28 20:29:50 +02:00
|
|
|
char *xgetcwd(void)
|
|
|
|
{
|
|
|
|
struct strbuf sb = STRBUF_INIT;
|
|
|
|
if (strbuf_getcwd(&sb))
|
|
|
|
die_errno(_("unable to get current working directory"));
|
|
|
|
return strbuf_detach(&sb, NULL);
|
|
|
|
}
|
2014-11-30 09:24:45 +01:00
|
|
|
|
2015-09-24 23:05:37 +02:00
|
|
|
int xsnprintf(char *dst, size_t max, const char *fmt, ...)
|
|
|
|
{
|
|
|
|
va_list ap;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
va_start(ap, fmt);
|
|
|
|
len = vsnprintf(dst, max, fmt, ap);
|
|
|
|
va_end(ap);
|
|
|
|
|
|
|
|
if (len < 0)
|
|
|
|
die("BUG: your snprintf is broken");
|
|
|
|
if (len >= max)
|
|
|
|
die("BUG: attempt to snprintf into too-small buffer");
|
|
|
|
return len;
|
|
|
|
}
|
|
|
|
|
write_file: add pointer+len variant
There are many callsites which could use write_file, but for
which it is a little awkward because they have a strbuf or
other pointer/len combo. Specifically:
1. write_file() takes a format string, so we have to use
"%s" or "%.*s", which are ugly.
2. Using any form of "%s" does not handle embedded NULs in
the output. That probably doesn't matter for our
call-sites, but it's nicer not to have to worry.
3. It's less efficient; we format into another strbuf
just to do the write. That's probably not measurably
slow for our uses, but it's simply inelegant.
We can fix this by providing a helper to write out the
formatted buffer, and just calling it from write_file().
Note that we don't do the usual "complete with a newline"
that write_file does. If the caller has their own buffer,
there's a reasonable chance they're doing something more
complicated than a single line, and they can call
strbuf_complete_line() themselves.
We could go even further and add strbuf_write_file(), but it
doesn't save much:
- write_file_buf(path, sb.buf, sb.len);
+ strbuf_write_file(&sb, path);
It would also be somewhat asymmetric with strbuf_read_file,
which actually returns errors rather than dying (and the
error handling is most of the benefit of write_file() in the
first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-08 11:12:22 +02:00
|
|
|
void write_file_buf(const char *path, const char *buf, size_t len)
|
2014-11-30 09:24:45 +01:00
|
|
|
{
|
write_file: add pointer+len variant
There are many callsites which could use write_file, but for
which it is a little awkward because they have a strbuf or
other pointer/len combo. Specifically:
1. write_file() takes a format string, so we have to use
"%s" or "%.*s", which are ugly.
2. Using any form of "%s" does not handle embedded NULs in
the output. That probably doesn't matter for our
call-sites, but it's nicer not to have to worry.
3. It's less efficient; we format into another strbuf
just to do the write. That's probably not measurably
slow for our uses, but it's simply inelegant.
We can fix this by providing a helper to write out the
formatted buffer, and just calling it from write_file().
Note that we don't do the usual "complete with a newline"
that write_file does. If the caller has their own buffer,
there's a reasonable chance they're doing something more
complicated than a single line, and they can call
strbuf_complete_line() themselves.
We could go even further and add strbuf_write_file(), but it
doesn't save much:
- write_file_buf(path, sb.buf, sb.len);
+ strbuf_write_file(&sb, path);
It would also be somewhat asymmetric with strbuf_read_file,
which actually returns errors rather than dying (and the
error handling is most of the benefit of write_file() in the
first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-08 11:12:22 +02:00
|
|
|
int fd = xopen(path, O_WRONLY | O_CREAT | O_TRUNC, 0666);
|
avoid "write_in_full(fd, buf, len) != len" pattern
The return value of write_in_full() is either "-1", or the
requested number of bytes[1]. If we make a partial write
before seeing an error, we still return -1, not a partial
value. This goes back to f6aa66cb95 (write_in_full: really
write in full or return error on disk full., 2007-01-11).
So checking anything except "was the return value negative"
is pointless. And there are a couple of reasons not to do
so:
1. It can do a funny signed/unsigned comparison. If your
"len" is signed (e.g., a size_t) then the compiler will
promote the "-1" to its unsigned variant.
This works out for "!= len" (unless you really were
trying to write the maximum size_t bytes), but is a
bug if you check "< len" (an example of which was fixed
recently in config.c).
We should avoid promoting the mental model that you
need to check the length at all, so that new sites are
not tempted to copy us.
2. Checking for a negative value is shorter to type,
especially when the length is an expression.
3. Linus says so. In d34cf19b89 (Clean up write_in_full()
users, 2007-01-11), right after the write_in_full()
semantics were changed, he wrote:
I really wish every "write_in_full()" user would just
check against "<0" now, but this fixes the nasty and
stupid ones.
Appeals to authority aside, this makes it clear that
writing it this way does not have an intentional
benefit. It's a historical curiosity that we never
bothered to clean up (and which was undoubtedly
cargo-culted into new sites).
So let's convert these obviously-correct cases (this
includes write_str_in_full(), which is just a wrapper for
write_in_full()).
[1] A careful reader may notice there is one way that
write_in_full() can return a different value. If we ask
write() to write N bytes and get a return value that is
_larger_ than N, we could return a larger total. But
besides the fact that this would imply a totally broken
version of write(), it would already invoke undefined
behavior. Our internal remaining counter is an unsigned
size_t, which means that subtracting too many byte will
wrap it around to a very large number. So we'll instantly
begin reading off the end of the buffer, trying to write
gigabytes (or petabytes) of data.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-09-13 19:16:03 +02:00
|
|
|
if (write_in_full(fd, buf, len) < 0)
|
write_file: add pointer+len variant
There are many callsites which could use write_file, but for
which it is a little awkward because they have a strbuf or
other pointer/len combo. Specifically:
1. write_file() takes a format string, so we have to use
"%s" or "%.*s", which are ugly.
2. Using any form of "%s" does not handle embedded NULs in
the output. That probably doesn't matter for our
call-sites, but it's nicer not to have to worry.
3. It's less efficient; we format into another strbuf
just to do the write. That's probably not measurably
slow for our uses, but it's simply inelegant.
We can fix this by providing a helper to write out the
formatted buffer, and just calling it from write_file().
Note that we don't do the usual "complete with a newline"
that write_file does. If the caller has their own buffer,
there's a reasonable chance they're doing something more
complicated than a single line, and they can call
strbuf_complete_line() themselves.
We could go even further and add strbuf_write_file(), but it
doesn't save much:
- write_file_buf(path, sb.buf, sb.len);
+ strbuf_write_file(&sb, path);
It would also be somewhat asymmetric with strbuf_read_file,
which actually returns errors rather than dying (and the
error handling is most of the benefit of write_file() in the
first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-08 11:12:22 +02:00
|
|
|
die_errno(_("could not write to %s"), path);
|
|
|
|
if (close(fd))
|
|
|
|
die_errno(_("could not close %s"), path);
|
2014-11-30 09:24:45 +01:00
|
|
|
}
|
2015-06-05 21:45:05 +02:00
|
|
|
|
2016-07-08 11:09:34 +02:00
|
|
|
void write_file(const char *path, const char *fmt, ...)
|
2015-08-24 22:03:07 +02:00
|
|
|
{
|
|
|
|
va_list params;
|
2014-11-30 09:24:45 +01:00
|
|
|
struct strbuf sb = STRBUF_INIT;
|
2015-08-24 22:03:07 +02:00
|
|
|
|
|
|
|
va_start(params, fmt);
|
2016-07-08 11:09:34 +02:00
|
|
|
strbuf_vaddf(&sb, fmt, params);
|
2015-08-24 22:03:07 +02:00
|
|
|
va_end(params);
|
|
|
|
|
2016-07-08 11:09:34 +02:00
|
|
|
strbuf_complete_line(&sb);
|
2015-08-24 22:03:07 +02:00
|
|
|
|
write_file: add pointer+len variant
There are many callsites which could use write_file, but for
which it is a little awkward because they have a strbuf or
other pointer/len combo. Specifically:
1. write_file() takes a format string, so we have to use
"%s" or "%.*s", which are ugly.
2. Using any form of "%s" does not handle embedded NULs in
the output. That probably doesn't matter for our
call-sites, but it's nicer not to have to worry.
3. It's less efficient; we format into another strbuf
just to do the write. That's probably not measurably
slow for our uses, but it's simply inelegant.
We can fix this by providing a helper to write out the
formatted buffer, and just calling it from write_file().
Note that we don't do the usual "complete with a newline"
that write_file does. If the caller has their own buffer,
there's a reasonable chance they're doing something more
complicated than a single line, and they can call
strbuf_complete_line() themselves.
We could go even further and add strbuf_write_file(), but it
doesn't save much:
- write_file_buf(path, sb.buf, sb.len);
+ strbuf_write_file(&sb, path);
It would also be somewhat asymmetric with strbuf_read_file,
which actually returns errors rather than dying (and the
error handling is most of the benefit of write_file() in the
first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-08 11:12:22 +02:00
|
|
|
write_file_buf(path, sb.buf, sb.len);
|
2016-07-08 11:09:34 +02:00
|
|
|
strbuf_release(&sb);
|
2015-08-24 22:03:07 +02:00
|
|
|
}
|
|
|
|
|
2015-06-05 21:45:05 +02:00
|
|
|
void sleep_millisec(int millisec)
|
|
|
|
{
|
|
|
|
poll(NULL, 0, millisec);
|
|
|
|
}
|
2017-04-18 23:57:43 +02:00
|
|
|
|
|
|
|
int xgethostname(char *buf, size_t len)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* If the full hostname doesn't fit in buf, POSIX does not
|
|
|
|
* specify whether the buffer will be null-terminated, so to
|
|
|
|
* be safe, do it ourselves.
|
|
|
|
*/
|
|
|
|
int ret = gethostname(buf, len);
|
|
|
|
if (!ret)
|
|
|
|
buf[len - 1] = 0;
|
|
|
|
return ret;
|
|
|
|
}
|