mirrors/git
1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-11-13 20:53:02 +01:00
Code Activity
git/t/t1400-update-ref.sh

235 lines
7.7 KiB
Bash
Raw Normal View History

Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
#!/bin/sh
#
# Copyright (c) 2006 Shawn Pearce
#
test_description='Test git-update-ref and basic ref logging'
. ./test-lib.sh
Z=0000000000000000000000000000000000000000
A=1111111111111111111111111111111111111111
B=2222222222222222222222222222222222222222
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
C=3333333333333333333333333333333333333333
D=4444444444444444444444444444444444444444
E=5555555555555555555555555555555555555555
F=6666666666666666666666666666666666666666
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
m=refs/heads/master
Display an error from update-ref if target ref name is invalid. Alex Riesen (raa.lkml@gmail.com) recently observed that git branch would fail with no error message due to unexpected situations with regards to refs. For example, if .git/refs/heads/gu is a file but "git branch -b refs/heads/gu/fixa HEAD" was invoked by the user it would fail silently due to refs/heads/gu being a file and not a directory. This change adds a test for trying to create a ref within a directory that is actually currently a file, and adds error printing within the ref locking routine should the resolve operation fail. The error printing code probably belongs at this level of the library as other failures within the ref locking, writing and logging code are also currently at this level of the code. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-29 05:44:51 +02:00
n_dir=refs/heads/gu
n=$n_dir/fixes
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"create $m" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"git-update-ref $m $A &&
test $A"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"create $m" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"git-update-ref $m $B $A &&
test $B"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
rm -f .git/$m
Display an error from update-ref if target ref name is invalid. Alex Riesen (raa.lkml@gmail.com) recently observed that git branch would fail with no error message due to unexpected situations with regards to refs. For example, if .git/refs/heads/gu is a file but "git branch -b refs/heads/gu/fixa HEAD" was invoked by the user it would fail silently due to refs/heads/gu being a file and not a directory. This change adds a test for trying to create a ref within a directory that is actually currently a file, and adds error printing within the ref locking routine should the resolve operation fail. The error printing code probably belongs at this level of the library as other failures within the ref locking, writing and logging code are also currently at this level of the code. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-29 05:44:51 +02:00
test_expect_success \
"fail to create $n" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"touch .git/$n_dir
Fix t1400-update-ref test minimally It depended on specific error messages to detect failure but the implementation changed and broke the test. This fixes the breakage minimally. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:46:00 +02:00
git-update-ref $n $A >out 2>err"'
test $? != 0'
Display an error from update-ref if target ref name is invalid. Alex Riesen (raa.lkml@gmail.com) recently observed that git branch would fail with no error message due to unexpected situations with regards to refs. For example, if .git/refs/heads/gu is a file but "git branch -b refs/heads/gu/fixa HEAD" was invoked by the user it would fail silently due to refs/heads/gu being a file and not a directory. This change adds a test for trying to create a ref within a directory that is actually currently a file, and adds error printing within the ref locking routine should the resolve operation fail. The error printing code probably belongs at this level of the library as other failures within the ref locking, writing and logging code are also currently at this level of the code. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-29 05:44:51 +02:00
rm -f .git/$n_dir out err
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"create $m (by HEAD)" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"git-update-ref HEAD $A &&
test $A"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"create $m (by HEAD)" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"git-update-ref HEAD $B $A &&
test $B"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
rm -f .git/$m
test_expect_failure \
'(not) create HEAD with old sha1' \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"git-update-ref HEAD $A $B"
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_failure \
"(not) prior created .git/$m" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"test -f .git/$m"
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
rm -f .git/$m
test_expect_success \
"create HEAD" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"git-update-ref HEAD $A"
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_failure \
'(not) change HEAD with wrong SHA1' \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"git-update-ref HEAD $B $Z"
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_failure \
"(not) changed .git/$m" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"test $B"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
rm -f .git/$m
Enable reflogs by default in any repository with a working directory. New and experienced Git users alike are finding out too late that they forgot to enable reflogs in the current repository, and cannot use the information stored within it to recover from an incorrectly entered command such as `git reset --hard HEAD^^^` when they really meant HEAD^^ (aka HEAD~2). So enable reflogs by default in all future versions of Git, unless the user specifically disables it with: [core] logAllRefUpdates = false in their .git/config or ~/.gitconfig. We only enable reflogs in repositories that have a working directory associated with them, as shared/bare repositories do not have an easy means to prune away old log entries, or may fail logging entirely if the user's gecos information is not valid during a push. This heuristic was suggested on the mailing list by Junio. Documentation was also updated to indicate the new default behavior. We probably should start to teach usuing the reflog to recover from mistakes in some of the tutorial material, as new users are likely to make a few along the way and will feel better knowing they can recover from them quickly and easily, without fsck-objects' lost+found features. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-12-14 23:41:17 +01:00
: a repository with working tree always has reflog these days...
: >.git/logs/refs/heads/master
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"create $m (logged by touch)" \
'GIT_COMMITTER_DATE="2005-05-26 23:30" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
git-update-ref HEAD '"$A"' -m "Initial Creation" &&
test '"$A"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"update $m (logged by touch)" \
'GIT_COMMITTER_DATE="2005-05-26 23:31" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
git-update-ref HEAD'" $B $A "'-m "Switch" &&
test '"$B"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"set $m (logged by touch)" \
'GIT_COMMITTER_DATE="2005-05-26 23:41" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
git-update-ref HEAD'" $A &&
test $A"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
cat >expect <<EOF
$Z $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 Initial Creation
$A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150260 +0000 Switch
$B $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150860 +0000
EOF
test_expect_success \
"verifying $m's log" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"diff expect .git/logs/$m"
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
rm -rf .git/$m .git/logs expect
test_expect_success \
'enable core.logAllRefUpdates' \
[PATCH] Rename git-repo-config to git-config. Signed-off-by: Tom Prince <tom.prince@ualberta.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-29 01:16:53 +01:00
'git-config core.logAllRefUpdates true &&
test true = $(git-config --bool --get core.logAllRefUpdates)'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"create $m (logged by config)" \
'GIT_COMMITTER_DATE="2005-05-26 23:32" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
git-update-ref HEAD'" $A "'-m "Initial Creation" &&
test '"$A"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"update $m (logged by config)" \
'GIT_COMMITTER_DATE="2005-05-26 23:33" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
git-update-ref HEAD'" $B $A "'-m "Switch" &&
test '"$B"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_expect_success \
"set $m (logged by config)" \
'GIT_COMMITTER_DATE="2005-05-26 23:43" \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
git-update-ref HEAD '"$A &&
test $A"' = $(cat .git/'"$m"')'
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
cat >expect <<EOF
$Z $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 +0000 Initial Creation
$A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150380 +0000 Switch
$B $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150980 +0000
EOF
test_expect_success \
"verifying $m's log" \
'diff expect .git/logs/$m'
rm -f .git/$m .git/logs/$m expect
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
git-update-ref $m $D
cat >.git/logs/$m <<EOF
$C $A $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150320 -0500
$A $B $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150380 -0500
$F $Z $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150680 -0500
$Z $E $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150980 -0500
EOF
ed="Thu, 26 May 2005 18:32:00 -0500"
gd="Thu, 26 May 2005 18:33:00 -0500"
ld="Thu, 26 May 2005 18:43:00 -0500"
test_expect_success \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
'Query "master@{May 25 2005}" (before history)' \
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
'rm -f o e
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
git-rev-parse --verify "master@{May 25 2005}" >o 2>e &&
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
test '"$C"' = $(cat o) &&
Extend read_ref_at() to be usable from places other than sha1_name. You can pass an extra argument to the function to receive the reflog message information. Also when the log does not go back beyond the point the user asked, the cut-off time and count are given back to the caller for emitting the error messages as appropriately. We could later add configuration for get_sha1_basic() to make it an error instead of it being just a warning. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-19 10:19:05 +01:00
test "warning: Log for '\'master\'' only goes back to $ed." = "$(cat e)"'
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
test_expect_success \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
"Query master@{2005-05-25} (before history)" \
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
'rm -f o e
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
git-rev-parse --verify master@{2005-05-25} >o 2>e &&
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
test '"$C"' = $(cat o) &&
Extend read_ref_at() to be usable from places other than sha1_name. You can pass an extra argument to the function to receive the reflog message information. Also when the log does not go back beyond the point the user asked, the cut-off time and count are given back to the caller for emitting the error messages as appropriately. We could later add configuration for get_sha1_basic() to make it an error instead of it being just a warning. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-19 10:19:05 +01:00
echo test "warning: Log for '\'master\'' only goes back to $ed." = "$(cat e)"'
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
test_expect_success \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
'Query "master@{May 26 2005 23:31:59}" (1 second before history)' \
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
'rm -f o e
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
git-rev-parse --verify "master@{May 26 2005 23:31:59}" >o 2>e &&
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
test '"$C"' = $(cat o) &&
Extend read_ref_at() to be usable from places other than sha1_name. You can pass an extra argument to the function to receive the reflog message information. Also when the log does not go back beyond the point the user asked, the cut-off time and count are given back to the caller for emitting the error messages as appropriately. We could later add configuration for get_sha1_basic() to make it an error instead of it being just a warning. Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-01-19 10:19:05 +01:00
test "warning: Log for '\''master'\'' only goes back to $ed." = "$(cat e)"'
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
test_expect_success \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
'Query "master@{May 26 2005 23:32:00}" (exactly history start)' \
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
'rm -f o e
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
git-rev-parse --verify "master@{May 26 2005 23:32:00}" >o 2>e &&
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
test '"$A"' = $(cat o) &&
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
test "" = "$(cat e)"'
test_expect_success \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
'Query "master@{2005-05-26 23:33:01}" (middle of history with gap)' \
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
'rm -f o e
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
git-rev-parse --verify "master@{2005-05-26 23:33:01}" >o 2>e &&
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
test '"$B"' = $(cat o) &&
test "warning: Log .git/logs/'"$m has gap after $gd"'." = "$(cat e)"'
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
test_expect_success \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
'Query "master@{2005-05-26 23:38:00}" (middle of history)' \
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
'rm -f o e
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
git-rev-parse --verify "master@{2005-05-26 23:38:00}" >o 2>e &&
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
test '"$Z"' = $(cat o) &&
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
test "" = "$(cat e)"'
test_expect_success \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
'Query "master@{2005-05-26 23:43:00}" (exact end of history)' \
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
'rm -f o e
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
git-rev-parse --verify "master@{2005-05-26 23:43:00}" >o 2>e &&
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
test '"$E"' = $(cat o) &&
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
test "" = "$(cat e)"'
test_expect_success \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
'Query "master@{2005-05-28}" (past end of history)' \
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
'rm -f o e
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
git-rev-parse --verify "master@{2005-05-28}" >o 2>e &&
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
test '"$D"' = $(cat o) &&
test "warning: Log .git/logs/'"$m unexpectedly ended on $ld"'." = "$(cat e)"'
General ref log reading improvements. Corrected the log starting time displayed in the error message (as it was always showing the epoch due to a bad input to strtoul). Improved the log parser so we only scan backwards towards the '\n' from the end of the prior log; during this scan the last '>' is remembered to improve performance (rather than scanning forward to it). If the log record matched is the last log record in the file only use its new sha1 value if the date matches exactly; otherwise we leave the passed in sha1 alone as it already contains the current value of the ref. This way lookups of dates later than the log end to stick with the current ref value in case the ref was updated without logging. If it looks like someone changed the ref without logging it and we are going to return the sha1 which should have been valid during the missing period then warn the user that there might be log data missing and thus their query result may not be accurate. The check isn't perfect as its just based on comparing the old and new sha1 values between the two log records but its better than not checking at all. Implemented test cases based on git-rev-parse for most of the boundary conditions. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:28:19 +02:00
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
rm -f .git/$m .git/logs/$m expect
test_expect_success \
'creating initial files' \
Verify git-commit provides a reflog message. The reflog message from git-commit should include the first line of the commit message as supplied by the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-25 05:33:18 +02:00
'echo TEST >F &&
git-add F &&
GIT_AUTHOR_DATE="2005-05-26 23:30" \
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
GIT_COMMITTER_DATE="2005-05-26 23:30" git-commit -m add -a &&
Verify git-commit provides a reflog message. The reflog message from git-commit should include the first line of the commit message as supplied by the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-25 05:33:18 +02:00
h_TEST=$(git-rev-parse --verify HEAD)
echo The other day this did not work. >M &&
echo And then Bob told me how to fix it. >>M &&
echo OTHER >F &&
GIT_AUTHOR_DATE="2005-05-26 23:41" \
GIT_COMMITTER_DATE="2005-05-26 23:41" git-commit -F M -a &&
Record the type of commit operation in the reflog. If committing a merge (.git/MERGE_HEAD exists), an initial tree (no HEAD) or using --amend to amend the prior commit then denote the subtype of commit in the reflog. This helps to distinguish amended or merge commits from normal commits. In the case of --amend the prior sha1 is probably the commit which is being thrown away in favor of the new commit. Since it is likely that the old commit doesn't have any ref pointing to it anymore it can be interesting to know why that the commit was replaced and orphaned. In the case of a merge the prior sha1 is probably the first parent of the new merge commit. Consequently having its prior sha1 in the reflog is slightly less interesting but its still informative to know the commit was the result of a merge which had to be completed by hand. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-11 04:48:47 +02:00
h_OTHER=$(git-rev-parse --verify HEAD) &&
echo FIXED >F &&
GIT_AUTHOR_DATE="2005-05-26 23:44" \
GIT_COMMITTER_DATE="2005-05-26 23:44" git-commit --amend &&
h_FIXED=$(git-rev-parse --verify HEAD) &&
echo TEST+FIXED >F &&
echo Merged initial commit and a later commit. >M &&
echo $h_TEST >.git/MERGE_HEAD &&
GIT_AUTHOR_DATE="2005-05-26 23:45" \
GIT_COMMITTER_DATE="2005-05-26 23:45" git-commit -F M &&
h_MERGED=$(git-rev-parse --verify HEAD)
Verify git-commit provides a reflog message. The reflog message from git-commit should include the first line of the commit message as supplied by the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-25 05:33:18 +02:00
rm -f M'
cat >expect <<EOF
Record the type of commit operation in the reflog. If committing a merge (.git/MERGE_HEAD exists), an initial tree (no HEAD) or using --amend to amend the prior commit then denote the subtype of commit in the reflog. This helps to distinguish amended or merge commits from normal commits. In the case of --amend the prior sha1 is probably the commit which is being thrown away in favor of the new commit. Since it is likely that the old commit doesn't have any ref pointing to it anymore it can be interesting to know why that the commit was replaced and orphaned. In the case of a merge the prior sha1 is probably the first parent of the new merge commit. Consequently having its prior sha1 in the reflog is slightly less interesting but its still informative to know the commit was the result of a merge which had to be completed by hand. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-11 04:48:47 +02:00
$Z $h_TEST $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150200 +0000 commit (initial): add
Verify git-commit provides a reflog message. The reflog message from git-commit should include the first line of the commit message as supplied by the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-25 05:33:18 +02:00
$h_TEST $h_OTHER $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117150860 +0000 commit: The other day this did not work.
Record the type of commit operation in the reflog. If committing a merge (.git/MERGE_HEAD exists), an initial tree (no HEAD) or using --amend to amend the prior commit then denote the subtype of commit in the reflog. This helps to distinguish amended or merge commits from normal commits. In the case of --amend the prior sha1 is probably the commit which is being thrown away in favor of the new commit. Since it is likely that the old commit doesn't have any ref pointing to it anymore it can be interesting to know why that the commit was replaced and orphaned. In the case of a merge the prior sha1 is probably the first parent of the new merge commit. Consequently having its prior sha1 in the reflog is slightly less interesting but its still informative to know the commit was the result of a merge which had to be completed by hand. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-11 04:48:47 +02:00
$h_OTHER $h_FIXED $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117151040 +0000 commit (amend): The other day this did not work.
$h_FIXED $h_MERGED $GIT_COMMITTER_NAME <$GIT_COMMITTER_EMAIL> 1117151100 +0000 commit (merge): Merged initial commit and a later commit.
Verify git-commit provides a reflog message. The reflog message from git-commit should include the first line of the commit message as supplied by the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-25 05:33:18 +02:00
EOF
test_expect_success \
'git-commit logged updates' \
t1400: make test debuggable. I had a hard time figuring out why this test was failing with the packed-refs update without running it under "sh -x". This makes output from "sh t1400-update-ref.sh -v" more descriptive. Updating other tests would be a good janitorial task. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-16 22:41:14 +02:00
"diff expect .git/logs/$m"
Record the type of commit operation in the reflog. If committing a merge (.git/MERGE_HEAD exists), an initial tree (no HEAD) or using --amend to amend the prior commit then denote the subtype of commit in the reflog. This helps to distinguish amended or merge commits from normal commits. In the case of --amend the prior sha1 is probably the commit which is being thrown away in favor of the new commit. Since it is likely that the old commit doesn't have any ref pointing to it anymore it can be interesting to know why that the commit was replaced and orphaned. In the case of a merge the prior sha1 is probably the first parent of the new merge commit. Consequently having its prior sha1 in the reflog is slightly less interesting but its still informative to know the commit was the result of a merge which had to be completed by hand. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-11 04:48:47 +02:00
unset h_TEST h_OTHER h_FIXED h_MERGED
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
test_expect_success \
Verify git-commit provides a reflog message. The reflog message from git-commit should include the first line of the commit message as supplied by the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-25 05:33:18 +02:00
'git-cat-file blob master:F (expect OTHER)' \
'test OTHER = $(git-cat-file blob master:F)'
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
test_expect_success \
Verify git-commit provides a reflog message. The reflog message from git-commit should include the first line of the commit message as supplied by the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-25 05:33:18 +02:00
'git-cat-file blob master@{2005-05-26 23:30}:F (expect TEST)' \
'test TEST = $(git-cat-file blob "master@{2005-05-26 23:30}:F")'
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
test_expect_success \
Verify git-commit provides a reflog message. The reflog message from git-commit should include the first line of the commit message as supplied by the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-25 05:33:18 +02:00
'git-cat-file blob master@{2005-05-26 23:42}:F (expect OTHER)' \
'test OTHER = $(git-cat-file blob "master@{2005-05-26 23:42}:F")'
Change 'master@noon' syntax to 'master@{noon}'. Its ambiguous to parse "master@2006-05-17 18:30:foo" when foo is meant as a file name and ":30" is meant as 30 minutes past 6 pm. Therefore all date specifications in a sha1 expression must now appear within brackets and the ':' splitter used for the path name in a sha1 expression ignores ':' appearing within brackets. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-19 09:29:43 +02:00
Log ref updates to logs/refs/<ref> If config parameter core.logAllRefUpdates is true or the log file already exists then append a line to ".git/logs/refs/<ref>" whenever git-update-ref <ref> is executed. Each log line contains the following information: oldsha1 <SP> newsha1 <SP> committer <LF> where committer is the current user, date, time and timezone in the standard GIT ident format. If the caller is unable to append to the log file then git-update-ref will fail without updating <ref>. An optional message may be included in the log line with the -m flag. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-05-17 11:55:40 +02:00
test_done
Copy permalink