mirrors/git
1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-11-05 00:37:55 +01:00
Code Activity
git/connected.c

107 lines
3 KiB
C
Raw Normal View History

check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
#include "cache.h"
#include "run-command.h"
#include "sigchain.h"
#include "connected.h"
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 03:16:17 +02:00
#include "transport.h"
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
/*
* If we feed all the commits we want to verify to this command
*
fetch/receive: remove over-pessimistic connectivity check Git 1.7.8 introduced an object and history re-validation step after "fetch" or "push" causes new history to be added to a receiving repository. This is to protect a malicious server or pushing client from corrupting the repository by taking advantage of an existing corrupt object that is unconnected to existing history. But this check is way over-pessimistic. During "fetch" or "receive-pack" (the server side of "push"), unpack-objects and index-pack already validate individual objects that are received, and the only thing we would want to catch are corrupted objects that already happen to exist in our repository but are not referenced from our refs. Such objects must have been written by an earlier run of our codepaths that write out loose objects or packfiles, and they must have done the validation of individual objects when they did so. The only thing left to worry about is the connectivity integrity, which can be checked with "rev-list --objects", which is much cheaper. We have been paying the 5x to 8x runtime overhead the --verify-objects often adds for no real gain. Revert check_everything_connected() not to use this over-pessimistic check. Credit goes to Nguyễn Thái Ngọc Duy, who originally identified the performance regression and endured multiple rounds of reviews to fix it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-15 22:57:02 +01:00
* $ git rev-list --objects --stdin --not --all
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
*
* and if it does not error out, that means everything reachable from
fetch/receive: remove over-pessimistic connectivity check Git 1.7.8 introduced an object and history re-validation step after "fetch" or "push" causes new history to be added to a receiving repository. This is to protect a malicious server or pushing client from corrupting the repository by taking advantage of an existing corrupt object that is unconnected to existing history. But this check is way over-pessimistic. During "fetch" or "receive-pack" (the server side of "push"), unpack-objects and index-pack already validate individual objects that are received, and the only thing we would want to catch are corrupted objects that already happen to exist in our repository but are not referenced from our refs. Such objects must have been written by an earlier run of our codepaths that write out loose objects or packfiles, and they must have done the validation of individual objects when they did so. The only thing left to worry about is the connectivity integrity, which can be checked with "rev-list --objects", which is much cheaper. We have been paying the 5x to 8x runtime overhead the --verify-objects often adds for no real gain. Revert check_everything_connected() not to use this over-pessimistic check. Credit goes to Nguyễn Thái Ngọc Duy, who originally identified the performance regression and endured multiple rounds of reviews to fix it. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-15 22:57:02 +01:00
* these commits locally exists and is connected to our existing refs.
* Note that this does _not_ validate the individual objects.
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
*
* Returns 0 if everything is connected, non-zero otherwise.
*/
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:30:40 +02:00
int check_connected(sha1_iterate_fn fn, void *cb_data,
struct check_connected_options *opt)
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
{
run-command: introduce CHILD_PROCESS_INIT Most struct child_process variables are cleared using memset first after declaration. Provide a macro, CHILD_PROCESS_INIT, that can be used to initialize them statically instead. That's shorter, doesn't require a function call and is slightly more readable (especially given that we already have STRBUF_INIT, ARGV_ARRAY_INIT etc.). Helped-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-08-19 21:09:35 +02:00
struct child_process rev_list = CHILD_PROCESS_INIT;
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:30:40 +02:00
struct check_connected_options defaults = CHECK_CONNECTED_INIT;
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
char commit[41];
unsigned char sha1[20];
check_everything_connected: convert to argv_array This avoids the magic "9" array-size which we must avoid overflowing, making further patches simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:28:32 +02:00
int err = 0;
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 03:16:17 +02:00
struct packed_git *new_pack = NULL;
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:30:40 +02:00
struct transport *transport;
use strip_suffix instead of ends_with in simple cases When stripping a suffix like: if (ends_with(str, "foo")) buf = xmemdupz(str, strlen(str) - 3); we can instead use strip_suffix to avoid the constant 3, which must match the literal "foo" (we sometimes use strlen("foo") instead, but that means we are repeating ourselves). The example above becomes: if (strip_suffix(str, "foo", &len)) buf = xmemdupz(str, len); This also saves a strlen(), since we calculate the string length when detecting the suffix. Note that in some cases we also switch from xstrndup to xmemdupz, which saves a further strlen call. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-30 18:58:51 +02:00
size_t base_len;
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:30:40 +02:00
if (!opt)
opt = &defaults;
transport = opt->transport;
check_connected: relay errors to alternate descriptor Unless the "quiet" flag is given, check_connected sends any errors to the stderr of the caller (because the child rev-list inherits that descriptor). However, server-side callers may want to send these over a sideband channel instead. Let's make that possible. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:32:03 +02:00
if (fn(cb_data, sha1)) {
if (opt->err_fd)
close(opt->err_fd);
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
return err;
check_connected: relay errors to alternate descriptor Unless the "quiet" flag is given, check_connected sends any errors to the stderr of the caller (because the child rev-list inherits that descriptor). However, server-side callers may want to send these over a sideband channel instead. Let's make that possible. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:32:03 +02:00
}
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 03:16:17 +02:00
if (transport && transport->smart_options &&
transport->smart_options->self_contained_and_connected &&
transport->pack_lockfile &&
use strip_suffix instead of ends_with in simple cases When stripping a suffix like: if (ends_with(str, "foo")) buf = xmemdupz(str, strlen(str) - 3); we can instead use strip_suffix to avoid the constant 3, which must match the literal "foo" (we sometimes use strlen("foo") instead, but that means we are repeating ourselves). The example above becomes: if (strip_suffix(str, "foo", &len)) buf = xmemdupz(str, len); This also saves a strlen(), since we calculate the string length when detecting the suffix. Note that in some cases we also switch from xstrndup to xmemdupz, which saves a further strlen call. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-30 18:58:51 +02:00
strip_suffix(transport->pack_lockfile, ".keep", &base_len)) {
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 03:16:17 +02:00
struct strbuf idx_file = STRBUF_INIT;
use strip_suffix instead of ends_with in simple cases When stripping a suffix like: if (ends_with(str, "foo")) buf = xmemdupz(str, strlen(str) - 3); we can instead use strip_suffix to avoid the constant 3, which must match the literal "foo" (we sometimes use strlen("foo") instead, but that means we are repeating ourselves). The example above becomes: if (strip_suffix(str, "foo", &len)) buf = xmemdupz(str, len); This also saves a strlen(), since we calculate the string length when detecting the suffix. Note that in some cases we also switch from xstrndup to xmemdupz, which saves a further strlen call. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2014-06-30 18:58:51 +02:00
strbuf_add(&idx_file, transport->pack_lockfile, base_len);
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 03:16:17 +02:00
strbuf_addstr(&idx_file, ".idx");
new_pack = add_packed_git(idx_file.buf, idx_file.len, 1);
strbuf_release(&idx_file);
}
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:30:40 +02:00
if (opt->shallow_file) {
check_everything_connected: convert to argv_array This avoids the magic "9" array-size which we must avoid overflowing, making further patches simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:28:32 +02:00
argv_array_push(&rev_list.args, "--shallow-file");
check_everything_connected: use a struct with named options The number of variants of check_everything_connected has grown over the years, so that the "real" function takes several possibly-zero, possibly-NULL arguments. We hid the complexity behind some wrapper functions, but this doesn't scale well when we want to add new options. If we add more wrapper variants to handle the new options, then we can get a combinatorial explosion when those options might be used together (right now nobody wants to use both "shallow" and "transport" together, so we get by with just a few wrappers). If instead we add new parameters to each function, each of which can have a default value, then callers who want the defaults end up with confusing invocations like: check_everything_connected(fn, 0, data, -1, 0, NULL); where it is unclear which parameter is which (and every caller needs updated when we add new options). Instead, let's add a struct to hold all of the optional parameters. This is a little more verbose for the callers (who have to declare the struct and fill it in), but it makes their code much easier to follow, because every option is named as it is set (and unused options do not have to be mentioned at all). Note that we could also stick the iteration function and its callback data into the option struct, too. But since those are required for each call, by avoiding doing so, we can let very simple callers just pass "NULL" for the options and not worry about the struct at all. While we're touching each site, let's also rename the function to check_connected(). The existing name was quite long, and not all of the wrappers even used the full name. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:30:40 +02:00
argv_array_push(&rev_list.args, opt->shallow_file);
connected.c: add new variant that runs with --shallow-file Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-12-05 14:02:46 +01:00
}
check_everything_connected: convert to argv_array This avoids the magic "9" array-size which we must avoid overflowing, making further patches simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:28:32 +02:00
argv_array_push(&rev_list.args,"rev-list");
argv_array_push(&rev_list.args, "--objects");
argv_array_push(&rev_list.args, "--stdin");
argv_array_push(&rev_list.args, "--not");
argv_array_push(&rev_list.args, "--all");
argv_array_push(&rev_list.args, "--quiet");
check_connected: add progress flag Connectivity checks have to traverse the entire object graph in the worst case (e.g., a full clone or a full push). For large repositories like linux.git, this can take 30-60 seconds, during which time git may produce little or no output. Let's add the option of showing progress, which is taken care of by rev-list. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:32:28 +02:00
if (opt->progress)
argv_array_pushf(&rev_list.args, "--progress=%s",
_("Checking connectivity"));
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
rev_list.git_cmd = 1;
check_connected: accept an env argument This lets callers influence the environment seen by rev-list, which will be useful when we start providing quarantined objects. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-10-03 22:49:08 +02:00
rev_list.env = opt->env;
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
rev_list.in = -1;
rev_list.no_stdout = 1;
check_connected: relay errors to alternate descriptor Unless the "quiet" flag is given, check_connected sends any errors to the stderr of the caller (because the child rev-list inherits that descriptor). However, server-side callers may want to send these over a sideband channel instead. Let's make that possible. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-07-15 12:32:03 +02:00
if (opt->err_fd)
rev_list.err = opt->err_fd;
else
rev_list.no_stderr = opt->quiet;
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
if (start_command(&rev_list))
return error(_("Could not run 'git rev-list'"));
sigchain_push(SIGPIPE, SIG_IGN);
commit[40] = '\n';
do {
clone: open a shortcut for connectivity check In order to make sure the cloned repository is good, we run "rev-list --objects --not --all $new_refs" on the repository. This is expensive on large repositories. This patch attempts to mitigate the impact in this special case. In the "good" clone case, we only have one pack. If all of the following are met, we can be sure that all objects reachable from the new refs exist, which is the intention of running "rev-list ...": - all refs point to an object in the pack - there are no dangling pointers in any object in the pack - no objects in the pack point to objects outside the pack The second and third checks can be done with the help of index-pack as a slight variation of --strict check (which introduces a new condition for the shortcut: pack transfer must be used and the number of objects large enough to call index-pack). The first is checked in check_everything_connected after we get an "ok" from index-pack. "index-pack + new checks" is still faster than the current "index-pack + rev-list", which is the whole point of this patch. If any of the conditions fail, we fall back to the good old but expensive "rev-list ..". In that case it's even more expensive because we have to pay for the new checks in index-pack. But that should only happen when the other side is either buggy or malicious. Cloning linux-2.6 over file:// before after real 3m25.693s 2m53.050s user 5m2.037s 4m42.396s sys 0m13.750s 0m16.574s A more realistic test with ssh:// over wireless before after real 11m26.629s 10m4.213s user 5m43.196s 5m19.444s sys 0m35.812s 0m37.630s This shortcut is not applied to shallow clones, partly because shallow clones should have no more objects than a usual fetch and the cost of rev-list is acceptable, partly to avoid dealing with corner cases when grafting is involved. This shortcut does not apply to unpack-objects code path either because the number of objects must be small in order to trigger that code path. Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-05-26 03:16:17 +02:00
/*
* If index-pack already checked that:
* - there are no dangling pointers in the new pack
* - the pack is self contained
* Then if the updated ref is in the new pack, then we
* are sure the ref is good and not sending it to
* rev-list for verification.
*/
if (new_pack && find_pack_entry_one(sha1, new_pack))
continue;
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
memcpy(commit, sha1_to_hex(sha1), 40);
if (write_in_full(rev_list.in, commit, 41) < 0) {
if (errno != EPIPE && errno != EINVAL)
connected.c: use error_errno() Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-08 11:47:39 +02:00
error_errno(_("failed write to rev-list"));
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
err = -1;
break;
}
} while (!fn(cb_data, sha1));
connected.c: use error_errno() Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2016-05-08 11:47:39 +02:00
if (close(rev_list.in))
err = error_errno(_("failed to close rev-list's stdin"));
check_everything_connected(): libify Extract the helper function and the type definition of the iterator function it uses out of builtin/fetch.c into a separate source and a header file. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-09-03 01:33:22 +02:00
sigchain_pop(SIGPIPE);
return finish_command(&rev_list) || err;
}
Copy permalink