write_index: optionally allow broken null sha1s
Commit 4337b58 (do not write null sha1s to on-disk index,
2012-07-28) added a safety check preventing git from writing
null sha1s into the index. The intent was to catch errors in
other parts of the code that might let such an entry slip
into the index (or worse, a tree).
Some existing repositories may have invalid trees that
contain null sha1s already, though. Until 4337b58, a common
way to clean this up would be to use git-filter-branch's
index-filter to repair such broken entries. That now fails
when filter-branch tries to write out the index.
Introduce a GIT_ALLOW_NULL_SHA1 environment variable to
relax this check and make it easier to recover from such a
history.
It is tempting to not involve filter-branch in this commit
at all, and instead require the user to manually invoke
GIT_ALLOW_NULL_SHA1=1 git filter-branch ...
to perform an index-filter on a history with trees with null
sha1s. That would be slightly safer, but requires some
specialized knowledge from the user. So let's set the
GIT_ALLOW_NULL_SHA1 variable automatically when checking out
the to-be-filtered trees. Advice on using filter-branch to
remove such entries already exists on places like
stackoverflow, and this patch makes it Just Work again on
recent versions of git.
Further commands that touch the index will still notice and
fail, unless they actually remove the broken entries. A
filter-branch whose filters do not touch the index at all
will not error out (since we complain of the null sha1 only
on writing, not when making a tree out of the index), but
this is acceptable, as we still print a loud warning, so the
problem is unlikely to go unnoticed.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-27 22:41:12 +02:00
|
|
|
#!/bin/sh
|
|
|
|
|
|
|
|
|
|
test_description='filter-branch removal of trees with null sha1'
|
|
|
|
|
. ./test-lib.sh
|
|
|
|
|
|
|
|
|
|
test_expect_success 'setup: base commits' '
|
|
|
|
|
test_commit one &&
|
|
|
|
|
test_commit two &&
|
|
|
|
|
test_commit three
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_expect_success 'setup: a commit with a bogus null sha1 in the tree' '
|
|
|
|
|
{
|
|
|
|
|
git ls-tree HEAD &&
|
|
|
|
|
printf "160000 commit $_z40\\tbroken\\n"
|
2015-03-20 11:07:15 +01:00
|
|
|
} >broken-tree &&
|
write_index: optionally allow broken null sha1s
Commit 4337b58 (do not write null sha1s to on-disk index,
2012-07-28) added a safety check preventing git from writing
null sha1s into the index. The intent was to catch errors in
other parts of the code that might let such an entry slip
into the index (or worse, a tree).
Some existing repositories may have invalid trees that
contain null sha1s already, though. Until 4337b58, a common
way to clean this up would be to use git-filter-branch's
index-filter to repair such broken entries. That now fails
when filter-branch tries to write out the index.
Introduce a GIT_ALLOW_NULL_SHA1 environment variable to
relax this check and make it easier to recover from such a
history.
It is tempting to not involve filter-branch in this commit
at all, and instead require the user to manually invoke
GIT_ALLOW_NULL_SHA1=1 git filter-branch ...
to perform an index-filter on a history with trees with null
sha1s. That would be slightly safer, but requires some
specialized knowledge from the user. So let's set the
GIT_ALLOW_NULL_SHA1 variable automatically when checking out
the to-be-filtered trees. Advice on using filter-branch to
remove such entries already exists on places like
stackoverflow, and this patch makes it Just Work again on
recent versions of git.
Further commands that touch the index will still notice and
fail, unless they actually remove the broken entries. A
filter-branch whose filters do not touch the index at all
will not error out (since we complain of the null sha1 only
on writing, not when making a tree out of the index), but
this is acceptable, as we still print a loud warning, so the
problem is unlikely to go unnoticed.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-27 22:41:12 +02:00
|
|
|
echo "add broken entry" >msg &&
|
|
|
|
|
|
|
|
|
|
tree=$(git mktree <broken-tree) &&
|
|
|
|
|
test_tick &&
|
|
|
|
|
commit=$(git commit-tree $tree -p HEAD <msg) &&
|
|
|
|
|
git update-ref HEAD "$commit"
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
# we have to make one more commit on top removing the broken
|
|
|
|
|
# entry, since otherwise our index does not match HEAD (and filter-branch will
|
|
|
|
|
# complain). We could make the index match HEAD, but doing so would involve
|
|
|
|
|
# writing a null sha1 into the index.
|
|
|
|
|
test_expect_success 'setup: bring HEAD and index in sync' '
|
|
|
|
|
test_tick &&
|
|
|
|
|
git commit -a -m "back to normal"
|
|
|
|
|
'
|
|
|
|
|
|
cache-tree: reject entries with null sha1
We generally disallow null sha1s from entering the index,
due to 4337b5856 (do not write null sha1s to on-disk index,
2012-07-28). However, we loosened that in 83bd7437c
(write_index: optionally allow broken null sha1s,
2013-08-27) so that tools like filter-branch could be used
to repair broken history.
However, we should make sure that these broken entries do
not get propagated into new trees. For most entries, we'd
catch them with the missing-object check (since presumably
the null sha1 does not exist in our object database). But
gitlink entries do not need reachability, so we may blindly
copy the entry into a bogus tree.
This patch rejects all null sha1s (with the same "invalid
entry" message that missing objects get) when building trees
from the index. It does so even for non-gitlinks, and even
when "write-tree" is given the --missing-ok flag. The null
sha1 is a special sentinel value that is already rejected in
trees by fsck; whether the object exists or not, it is an
error to put it in a tree.
Note that for this to work, we must also avoid reusing an
existing cache-tree that contains the null sha1. This patch
does so by just refusing to write out any cache tree when
the index contains a null sha1. This is blunter than we need
to be; we could just reject the subtree that contains the
offending entry. But it's not worth the complexity. The
behavior is unchanged unless you have a broken index entry,
and even then we'd refuse the whole index write unless the
emergency GIT_ALLOW_NULL_SHA1 is in use. And even then the
end result is only a performance drop (any write-tree will
have to generate the whole cache-tree from scratch).
The tests bear some explanation.
The existing test in t7009 doesn't catch this problem,
because our index-filter runs "git rm --cached", which will
try to rewrite the updated index and barf on the bogus
entry. So we never even make it to write-tree. The new test
there adds a noop index-filter, which does show the problem.
The new tests in t1601 are slightly redundant with what
filter-branch is doing under the hood in t7009. But as
they're much more direct, they're easier to reason about.
And should filter-branch ever change or go away, we'd want
to make sure that these plumbing commands behave sanely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2017-04-21 20:46:17 +02:00
|
|
|
test_expect_success 'noop filter-branch complains' '
|
|
|
|
|
test_must_fail git filter-branch \
|
|
|
|
|
--force --prune-empty \
|
|
|
|
|
--index-filter "true"
|
|
|
|
|
'
|
|
|
|
|
|
write_index: optionally allow broken null sha1s
Commit 4337b58 (do not write null sha1s to on-disk index,
2012-07-28) added a safety check preventing git from writing
null sha1s into the index. The intent was to catch errors in
other parts of the code that might let such an entry slip
into the index (or worse, a tree).
Some existing repositories may have invalid trees that
contain null sha1s already, though. Until 4337b58, a common
way to clean this up would be to use git-filter-branch's
index-filter to repair such broken entries. That now fails
when filter-branch tries to write out the index.
Introduce a GIT_ALLOW_NULL_SHA1 environment variable to
relax this check and make it easier to recover from such a
history.
It is tempting to not involve filter-branch in this commit
at all, and instead require the user to manually invoke
GIT_ALLOW_NULL_SHA1=1 git filter-branch ...
to perform an index-filter on a history with trees with null
sha1s. That would be slightly safer, but requires some
specialized knowledge from the user. So let's set the
GIT_ALLOW_NULL_SHA1 variable automatically when checking out
the to-be-filtered trees. Advice on using filter-branch to
remove such entries already exists on places like
stackoverflow, and this patch makes it Just Work again on
recent versions of git.
Further commands that touch the index will still notice and
fail, unless they actually remove the broken entries. A
filter-branch whose filters do not touch the index at all
will not error out (since we complain of the null sha1 only
on writing, not when making a tree out of the index), but
this is acceptable, as we still print a loud warning, so the
problem is unlikely to go unnoticed.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-08-27 22:41:12 +02:00
|
|
|
test_expect_success 'filter commands are still checked' '
|
|
|
|
|
test_must_fail git filter-branch \
|
|
|
|
|
--force --prune-empty \
|
|
|
|
|
--index-filter "git rm --cached --ignore-unmatch three.t"
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_expect_success 'removing the broken entry works' '
|
|
|
|
|
echo three >expect &&
|
|
|
|
|
git filter-branch \
|
|
|
|
|
--force --prune-empty \
|
|
|
|
|
--index-filter "git rm --cached --ignore-unmatch broken" &&
|
|
|
|
|
git log -1 --format=%s >actual &&
|
|
|
|
|
test_cmp expect actual
|
|
|
|
|
'
|
|
|
|
|
|
|
|
|
|
test_done
|