mirrors/git
1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-10-31 14:27:54 +01:00
Code Activity
git/Documentation/git-clean.txt

67 lines
1.6 KiB
Text
Raw Normal View History

Add git-clean command This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 08:00:48 +02:00
git-clean(1)
============
NAME
----
git-clean - Remove untracked files from the working tree
SYNOPSIS
--------
[verse]
Make the DESCRIPTION match <x>... items in the SYNOPSIS When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION also mentions "<path>..." and says the specified "paths" (note plural) are used for $whatever. This fixes the obvious mismatches. Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-30 11:33:43 +02:00
'git clean' [-d] [-f] [-n] [-q] [-x | -X] [--] <path>...
Add git-clean command This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 08:00:48 +02:00
DESCRIPTION
-----------
Documentation: git-clean: make description more readable The existing text is a little bit awkward. This rewrites the description section to be more readable and friendly. Signed-off-by: Wesley J. Landaker <wjl@icecavern.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-25 17:13:41 +02:00
git-clean doc: the command only affects paths under $(cwd) Fredrik Skolmli and Thomas Rast noticed that it was left unstated that "git clean" ran from a subdirectory will not affect anything outside it, with or without path limiters. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-05-06 19:48:26 +02:00
Cleans the working tree by recursively removing files that are not
under version control, starting from the current directory.
Documentation: git-clean: make description more readable The existing text is a little bit awkward. This rewrites the description section to be more readable and friendly. Signed-off-by: Wesley J. Landaker <wjl@icecavern.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-04-25 17:13:41 +02:00
Normally, only files unknown to git are removed, but if the '-x'
option is specified, ignored files are also removed. This can, for
example, be useful to remove all build products.
Make the DESCRIPTION match <x>... items in the SYNOPSIS When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION also mentions "<path>..." and says the specified "paths" (note plural) are used for $whatever. This fixes the obvious mismatches. Signed-off-by: Abhijit Menon-Sen <ams@toroid.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-30 11:33:43 +02:00
If any optional `<path>...` arguments are given, only those paths
are affected.
Teach git-clean optional <paths>... parameters. When optional paths arguments are given, git-clean passes them to underlying git-ls-files; with this, you can say: git clean 'temp-*' to clean only the garbage files whose names begin with 'temp-'. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Pavel Roskin <proski@gnu.org>
2006-05-08 21:02:44 +02:00
Add git-clean command This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 08:00:48 +02:00
OPTIONS
-------
-d::
Remove untracked directories in addition to untracked files.
clean: require double -f options to nuke nested git repository and work tree When you have an embedded git work tree in your work tree (be it an orphaned submodule, or an independent checkout of an unrelated project), "git clean -d -f" blindly descended into it and removed everything. This is rarely what the user wants. Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-07-01 00:33:45 +02:00
If an untracked directory is managed by a different git
repository, it is not removed by default. Use -f option twice
if you really want to remove such a directory.
Add git-clean command This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 08:00:48 +02:00
Add clean.requireForce option, and add -f option to git-clean to override it Add a new configuration option clean.requireForce. If set, git-clean will refuse to run, unless forced with the new -f option, or not acting due to -n. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-24 02:18:16 +02:00
-f::
UI consistency: allow --force for where -f means force git branch, checkout, clean, mv and tag all have an option -f to override certain checks. This patch makes them accept the long option --force as a synonym. While we're at it, document that checkout support --quiet as synonym for its short option -q. Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-08-29 11:05:00 +02:00
--force::
Fix minor documentation errors - git-ls-files.txt: typo in description of --ignored - git-clean.txt: s/forceRequire/requireForce/ Signed-off-by: Michael Spang <mspang@uwaterloo.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-05-06 20:09:34 +02:00
If the git configuration specifies clean.requireForce as true,
manpages: italicize git command names (which were in teletype font) The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-03 07:41:41 +02:00
'git-clean' will refuse to run unless given -f or -n.
Add clean.requireForce option, and add -f option to git-clean to override it Add a new configuration option clean.requireForce. If set, git-clean will refuse to run, unless forced with the new -f option, or not acting due to -n. Signed-off-by: Josh Triplett <josh@freedesktop.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2007-04-24 02:18:16 +02:00
Add git-clean command This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 08:00:48 +02:00
-n::
Docs: add some long/short options Namely: git-clean.txt: --dry-run --quiet git-count-objects.txt: --verbose git-quiltimport.txt: -n git-remote.txt: -v --verbose Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08 03:36:10 +02:00
--dry-run::
Add git-clean command This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 08:00:48 +02:00
Don't actually remove anything, just show what would be done.
-q::
Docs: add some long/short options Namely: git-clean.txt: --dry-run --quiet git-count-objects.txt: --verbose git-quiltimport.txt: -n git-remote.txt: -v --verbose Signed-off-by: Stephan Beyer <s-beyer@gmx.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-08 03:36:10 +02:00
--quiet::
Add git-clean command This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 08:00:48 +02:00
Be quiet, only report errors, but not the files that are
successfully removed.
-x::
Don't use the ignore rules. This allows removing all untracked
files, including build products. This can be used (possibly in
manpages: italicize git command names (which were in teletype font) The names of git commands are not meant to be entered at the commandline; they are just names. So we render them in italics, as is usual for command names in manpages. Using doit () { perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }' } for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \ merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt do doit <"$i" >"$i+" && mv "$i+" "$i" done git diff . Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-07-03 07:41:41 +02:00
conjunction with 'git-reset') to create a pristine
Add git-clean command This command removes untracked files from the working tree. This implementation is based on cg-clean with some simplifications. The documentation is included. [jc: with trivial documentation fix, noticed by Jakub Narebski] Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-05 08:00:48 +02:00
working directory to test a clean build.
-X::
Remove only files ignored by git. This may be useful to rebuild
everything from scratch, but keep manually created files.
Author
------
Written by Pavel Roskin <proski@gnu.org>
GIT
---
documentation: move git(7) to git(1) As the "git" man page describes the "git" command at the end-user level, it seems better to move it to man section 1. Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2008-06-06 09:07:32 +02:00
Part of the linkgit:git[1] suite
Copy permalink