mirrors/git
1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-10-31 22:37:54 +01:00
Code Activity
git/t/t5541-http-push.sh

329 lines
9.9 KiB
Bash
Raw Normal View History

test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
#!/bin/sh
#
# Copyright (c) 2008 Clemens Buchacher <drizzd@aon.at>
#
test_description='test smart pushing over http via http-backend'
. ./test-lib.sh
if test -n "$NO_CURL"; then
tests: Skip tests in a way that makes sense under TAP SKIP messages are now part of the TAP plan. A TAP harness now knows why a particular test was skipped and can report that information. The non-TAP harness built into Git's test-lib did nothing special with these messages, and is unaffected by these changes. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-06-24 19:44:48 +02:00
skip_all='skipping test, git built without http support'
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
test_done
fi
ROOT_PATH="$PWD"
LIB_HTTPD_PORT=${LIB_HTTPD_PORT-'5541'}
. "$TEST_DIRECTORY"/lib-httpd.sh
t5541: avoid TAP test miscounting lib-terminal.sh runs a test and thus increases the test count, but the output is lost so that TAP produces a "no plan found error". Move the lib-terminal call after the lib-httpd and make TAP happy (though still leave me clueless). Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08 22:06:21 +01:00
. "$TEST_DIRECTORY"/lib-terminal.sh
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
start_httpd
test_expect_success 'setup remote repository' '
cd "$ROOT_PATH" &&
mkdir test_repo &&
cd test_repo &&
git init &&
: >path1 &&
git add path1 &&
test_tick &&
git commit -m initial &&
cd - &&
git clone --bare test_repo test_repo.git &&
cd test_repo.git &&
git config http.receivepack true &&
http-backend: respect existing GIT_COMMITTER_* variables The http-backend program sets default GIT_COMMITTER_NAME and GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and REMOTE_ADDR variables provided by the webserver. However, it unconditionally overwrites any existing GIT_COMMITTER variables, which may have been customized by site-specific code in the webserver (or in a script wrapping http-backend). Let's leave those variables intact if they already exist, assuming that any such configuration was intentional. There is a slight chance of a regression if somebody has set GIT_COMMITTER_* for the entire webserver, not intending it to leak through http-backend. We could protect against this by passing the information in alternate variables. However, it seems unlikely that anyone will care about that regression, and there is value in the simplicity of using the common variable names that are used elsewhere in git. While we're tweaking the environment-handling in http-backend, let's switch it to use argv_array to handle the list of variables. That makes the memory management much simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-30 09:01:30 +02:00
git config core.logallrefupdates true &&
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
ORIG_HEAD=$(git rev-parse --verify HEAD) &&
cd - &&
mv test_repo.git "$HTTPD_DOCUMENT_ROOT_PATH"
'
t: test basic smart-http authentication We do not currently test authentication over smart-http at all. In theory, it should work exactly as it does for dumb http (which we do test). It does indeed work for these simple tests, but this patch lays the groundwork for more complex tests in future patches. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 15:25:36 +02:00
setup_askpass_helper
t5541-http-push: add test for URLs with trailing slash Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 04:15:16 +02:00
cat >exp <<EOF
GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200
POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200
EOF
remote-curl: ensure that URLs have a trailing slash Previously, we blindly assumed that URLs passed to the remote-curl helper did not end with a trailing slash. Use the convenience function end_url_with_slash() from http.[ch] to ensure that URLs have a trailing slash on invocation of the remote-curl helper, and use the URL as one with a trailing slash throughout. It is possible for users to pass a URL with a trailing slash to remote-curl, by, say, setting it in remote.<name>.url in their git config. The resulting requests have an empty path component (//) and may break implementations of the http git protocol. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 04:15:18 +02:00
test_expect_success 'no empty path components' '
t5541-http-push: add test for URLs with trailing slash Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 04:15:16 +02:00
# In the URL, add a trailing slash, and see if git appends yet another
# slash.
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
cd "$ROOT_PATH" &&
t5541-http-push: add test for URLs with trailing slash Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 04:15:16 +02:00
git clone $HTTPD_URL/smart/test_repo.git/ test_repo_clone &&
sed -e "
s/^.* \"//
s/\"//
s/ [1-9][0-9]*\$//
s/^GET /GET /
" >act <"$HTTPD_ROOT_PATH"/access.log &&
# Clear the log, so that it does not affect the "used receive-pack
# service" test which reads the log too.
#
# We do this before the actual comparison to ensure the log is cleared.
echo > "$HTTPD_ROOT_PATH"/access.log &&
test_cmp exp act
'
test_expect_success 'clone remote repository' '
rm -rf test_repo_clone &&
push: start warning upcoming default change for push.default In preparation for flipping the default to the "simple" mode from the "matching" mode that is the historical default, start warning users when they rely on unconfigured "git push" to default to the "matching" mode. Also, advertise for 'simple' where 'current' and 'upstream' are advised. Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-06-24 13:01:37 +02:00
git clone $HTTPD_URL/smart/test_repo.git test_repo_clone &&
(
cd test_repo_clone && git config push.default matching
)
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
'
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 19:19:50 +02:00
test_expect_success 'push to remote repository (standard)' '
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
cd "$ROOT_PATH"/test_repo_clone &&
: >path2 &&
git add path2 &&
test_tick &&
git commit -m path2 &&
HEAD=$(git rev-parse --verify HEAD) &&
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 19:19:50 +02:00
GIT_CURL_VERBOSE=1 git push -v -v 2>err &&
! grep "Expect: 100-continue" err &&
grep "POST git-receive-pack ([0-9]* bytes)" err &&
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
(cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git &&
test $HEAD = $(git rev-parse --verify HEAD))
'
test_expect_success 'push already up-to-date' '
git push
'
test_expect_success 'create and delete remote branch' '
cd "$ROOT_PATH"/test_repo_clone &&
git checkout -b dev &&
: >path3 &&
git add path3 &&
test_tick &&
git commit -m dev &&
git push origin dev &&
git push origin :dev &&
test_must_fail git show-ref --verify refs/remotes/origin/dev
'
remote-curl: Fix push status report when all branches fail The protocol between transport-helper.c and remote-curl requires remote-curl to always print a blank line after the push command has run. If the blank line is ommitted, transport-helper kills its container process (the git push the user started) with exit(128) and no message indicating a problem, assuming the helper already printed reasonable error text to the console. However if the remote rejects all branches with "ng" commands in the report-status reply, send-pack terminates with non-zero status, and in turn remote-curl exited with non-zero status before outputting the blank line after the helper status printed by send-pack. No error messages reach the user. This caused users to see the following from git push over HTTP when the remote side's update hook rejected the branch: $ git push http://... master Counting objects: 4, done. Delta compression using up to 6 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 301 bytes, done. Total 3 (delta 0), reused 0 (delta 0) $ Always print a blank line after the send-pack process terminates, ensuring the helper status report (if it was output) will be correctly parsed by the calling transport-helper.c. This ensures the helper doesn't abort before the status report can be shown to the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-20 04:12:09 +01:00
cat >"$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update" <<EOF
#!/bin/sh
exit 1
EOF
chmod a+x "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update"
cat >exp <<EOF
remote: error: hook declined to update refs/heads/dev2
To http://127.0.0.1:$LIB_HTTPD_PORT/smart/test_repo.git
! [remote rejected] dev2 -> dev2 (hook declined)
t5541: check error message against the real port number used Otherwise the test cannot be run with custom port set to LIB_HTTPD_PORT. Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-02-13 21:17:14 +01:00
error: failed to push some refs to 'http://127.0.0.1:$LIB_HTTPD_PORT/smart/test_repo.git'
remote-curl: Fix push status report when all branches fail The protocol between transport-helper.c and remote-curl requires remote-curl to always print a blank line after the push command has run. If the blank line is ommitted, transport-helper kills its container process (the git push the user started) with exit(128) and no message indicating a problem, assuming the helper already printed reasonable error text to the console. However if the remote rejects all branches with "ng" commands in the report-status reply, send-pack terminates with non-zero status, and in turn remote-curl exited with non-zero status before outputting the blank line after the helper status printed by send-pack. No error messages reach the user. This caused users to see the following from git push over HTTP when the remote side's update hook rejected the branch: $ git push http://... master Counting objects: 4, done. Delta compression using up to 6 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 301 bytes, done. Total 3 (delta 0), reused 0 (delta 0) $ Always print a blank line after the send-pack process terminates, ensuring the helper status report (if it was output) will be correctly parsed by the calling transport-helper.c. This ensures the helper doesn't abort before the status report can be shown to the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-20 04:12:09 +01:00
EOF
test_expect_success 'rejected update prints status' '
cd "$ROOT_PATH"/test_repo_clone &&
git checkout -b dev2 &&
: >path4 &&
git add path4 &&
test_tick &&
git commit -m dev2 &&
test_must_fail git push origin dev2 2>act &&
sed -e "/^remote: /s/ *$//" <act >cmp &&
test_cmp exp cmp
'
rm -f "$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git/hooks/update"
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
cat >exp <<EOF
t5541-http-push: add test for URLs with trailing slash Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-04-08 04:15:16 +02:00
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
GET /smart/test_repo.git/info/refs?service=git-upload-pack HTTP/1.1 200
POST /smart/test_repo.git/git-upload-pack HTTP/1.1 200
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200
remote-curl: Fix push status report when all branches fail The protocol between transport-helper.c and remote-curl requires remote-curl to always print a blank line after the push command has run. If the blank line is ommitted, transport-helper kills its container process (the git push the user started) with exit(128) and no message indicating a problem, assuming the helper already printed reasonable error text to the console. However if the remote rejects all branches with "ng" commands in the report-status reply, send-pack terminates with non-zero status, and in turn remote-curl exited with non-zero status before outputting the blank line after the helper status printed by send-pack. No error messages reach the user. This caused users to see the following from git push over HTTP when the remote side's update hook rejected the branch: $ git push http://... master Counting objects: 4, done. Delta compression using up to 6 threads. Compressing objects: 100% (2/2), done. Writing objects: 100% (3/3), 301 bytes, done. Total 3 (delta 0), reused 0 (delta 0) $ Always print a blank line after the send-pack process terminates, ensuring the helper status report (if it was output) will be correctly parsed by the calling transport-helper.c. This ensures the helper doesn't abort before the status report can be shown to the user. Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-20 04:12:09 +01:00
GET /smart/test_repo.git/info/refs?service=git-receive-pack HTTP/1.1 200
POST /smart/test_repo.git/git-receive-pack HTTP/1.1 200
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
EOF
test_expect_success 'used receive-pack service' '
sed -e "
s/^.* \"//
s/\"//
s/ [1-9][0-9]*\$//
s/^GET /GET /
" >act <"$HTTPD_ROOT_PATH"/access.log &&
test_cmp exp act
'
t554[01]-http-push: refactor, add non-ff tests Move non-fast forward tests to lib-httpd.sh so that we don't have to duplicate the tests in both t5540 and t5541. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-03-02 11:49:26 +01:00
test_http_push_nonff "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git \
"$ROOT_PATH"/test_repo_clone master
t5541-http-push.sh: add tests for non-fast-forward pushes Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 03:12:40 +01:00
transport-helper.c::push_refs(): ignore helper-reported status if ref is not to be pushed If the status of a ref is REF_STATUS_NONE, the remote helper will not be told to push the ref (via a 'push' command). However, the remote helper may still act on these refs. If the helper does act on the ref, and prints a status for it, ignore the report (ie. don't overwrite the status of the ref with it, nor the message in the remote_status member) if the reported status is 'no match'. This allows the user to be alerted to more "interesting" ref statuses, like REF_STATUS_NONFASTFORWARD. Cc: Jeff King <peff@peff.net> Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 03:12:44 +01:00
test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper' '
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 03:12:41 +01:00
# create a dissimilarly-named remote ref so that git is unable to match the
# two refs (viz. local, remote) unless an explicit refspec is provided.
git push origin master:retsam
echo "change changed" > path2 &&
git commit -a -m path2 --amend &&
# push master too; this ensures there is at least one '"'push'"' command to
# the remote helper and triggers interaction with the helper.
i18n: git-push "prevent you from losing" message Gettextize the "To prevent you from losing history" message. A test in lib-httpd.sh and another in t5541-http-push.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-23 00:42:12 +01:00
test_must_fail git push -v origin +master master:retsam >output 2>&1'
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 03:12:41 +01:00
i18n: git-push "prevent you from losing" message Gettextize the "To prevent you from losing history" message. A test in lib-httpd.sh and another in t5541-http-push.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-23 00:42:12 +01:00
test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: remote output' '
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 03:12:41 +01:00
grep "^ + [a-f0-9]*\.\.\.[a-f0-9]* *master -> master (forced update)$" output &&
i18n: git-push "prevent you from losing" message Gettextize the "To prevent you from losing history" message. A test in lib-httpd.sh and another in t5541-http-push.sh explicitly checked for this message. Change them to skip under GETTEXT_POISON=YesPlease. Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-02-23 00:42:12 +01:00
grep "^ ! \[rejected\] *master -> retsam (non-fast-forward)$" output
'
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 03:12:41 +01:00
i18n: use test_i18ncmp and test_i18ngrep in t5541, t6040, t6120, t7004, t7012 and t7060 Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-04-13 01:33:39 +02:00
test_expect_success 'push fails for non-fast-forward refs unmatched by remote helper: our output' '
Fix httpd tests that broke when non-ff push advice changed Signed-off-by: Christopher Tiwald <christiwald@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-04-12 19:56:28 +02:00
test_i18ngrep "Updates were rejected because" \
t5541-http-push: make grep expression check for one line only Don't feed a multiple-line pattern to grep and expect the them to match with lines in order. Simplify the grep expressions in the non-fast-forward tests to check only for the first line of the non-fast-forward warning - having that line should be enough assurance that the full warning is printed. Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-25 08:42:23 +01:00
output
t5541-http-push.sh: add test for unmatched, non-fast-forwarded refs Some refs can only be matched to a remote ref with an explicit refspec. When such a ref is a non-fast-forward of its remote ref, test that pushing them (with the explicit refspec specified) fails with a non- fast-foward-type error (viz. printing of ref status and help message). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2010-01-08 03:12:41 +01:00
'
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 19:19:50 +02:00
test_expect_success 'push (chunked)' '
git checkout master &&
test_commit commit path3 &&
HEAD=$(git rev-parse --verify HEAD) &&
t5541: use test_config to set/unset git config variables Instead of using construct such as: test_when_finished "git config --unset <key>" git config <key> <value> uses test_config <key> <value> The latter takes care of removing <key> at the end of the test. Signed-off-by: Yann Droneaud <ydroneaud@opteya.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-03-24 22:06:08 +01:00
test_config http.postbuffer 4 &&
t5541-http-push: add test for chunked Trigger the chunked type of pushing for smart HTTP. This can serve as a regression test for the issue fixed in 1e41827 (http: clear POSTFIELDS when initializing a slot). Signed-off-by: Tay Ray Chuan <rctay89@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-05-04 19:19:50 +02:00
git push -v -v origin $BRANCH 2>err &&
grep "POST git-receive-pack (chunked)" err &&
(cd "$HTTPD_DOCUMENT_ROOT_PATH"/test_repo.git &&
test $HEAD = $(git rev-parse --verify HEAD))
'
remote-curl: don't pass back fake refs When receive-pack advertises its list of refs, it generally hides the capabilities information after a NUL at the end of the first ref. However, when we have an empty repository, there are no refs, and therefore receive-pack writes a fake ref "capabilities^{}" with the capabilities afterwards. On the client side, git reads the result with get_remote_heads(). We pick the capabilities from the end of the line, and then call check_ref() to make sure the ref name is valid. We see that it isn't, and don't bother adding it to our list of refs. However, the call to check_ref() is enabled by passing the REF_NORMAL flag to get_remote_heads. For the regular git transport, we pass REF_NORMAL in get_refs_via_connect() if we are doing a push (since only receive-pack uses this fake ref). But in remote-curl, we never use this flag, and we accept the fake ref as a real one, passing it back from the helper to the parent git-push. Most of the time this bug goes unnoticed, as the fake ref won't match our refspecs. However, if "--mirror" is used, then we see it as remote cruft to be pruned, and try to pass along a deletion refspec for it. Of course this refspec has bogus syntax (because of the ^{}), and the helper complains, aborting the push. Let's have remote-curl mirror what the builtin get_refs_via_connect() does (at least for the case of using git protocol; we can leave the dumb info/refs reader as it is). This also fixes pushing with --mirror to a smart-http remote that uses alternates. The fake ".have" refs the server gives to avoid unnecessary network transfer has a similar bad interactions with the machinery. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2011-12-17 11:45:39 +01:00
test_expect_success 'push --all can push to empty repo' '
d=$HTTPD_DOCUMENT_ROOT_PATH/empty-all.git &&
git init --bare "$d" &&
git --git-dir="$d" config http.receivepack true &&
git push --all "$HTTPD_URL"/smart/empty-all.git
'
test_expect_success 'push --mirror can push to empty repo' '
d=$HTTPD_DOCUMENT_ROOT_PATH/empty-mirror.git &&
git init --bare "$d" &&
git --git-dir="$d" config http.receivepack true &&
git push --mirror "$HTTPD_URL"/smart/empty-mirror.git
'
test_expect_success 'push --all to repo with alternates' '
s=$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git &&
d=$HTTPD_DOCUMENT_ROOT_PATH/alternates-all.git &&
git clone --bare --shared "$s" "$d" &&
git --git-dir="$d" config http.receivepack true &&
git --git-dir="$d" repack -adl &&
git push --all "$HTTPD_URL"/smart/alternates-all.git
'
test_expect_success 'push --mirror to repo with alternates' '
s=$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git &&
d=$HTTPD_DOCUMENT_ROOT_PATH/alternates-mirror.git &&
git clone --bare --shared "$s" "$d" &&
git --git-dir="$d" config http.receivepack true &&
git --git-dir="$d" repack -adl &&
git push --mirror "$HTTPD_URL"/smart/alternates-mirror.git
'
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 10:43:08 +02:00
test_expect_success TTY 'push shows progress when stderr is a tty' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit noisy &&
test_terminal git push >output 2>&1 &&
grep "^Writing objects" output
'
test_expect_success TTY 'push --quiet silences status and progress' '
fix push --quiet: add 'quiet' capability to receive-pack Currently, git push --quiet produces some non-error output, e.g.: $ git push --quiet Unpacking objects: 100% (3/3), done. This fixes a bug reported for the fedora git package: https://bugzilla.redhat.com/show_bug.cgi?id=725593 Reported-by: Jesse Keating <jkeating@redhat.com> Cc: Todd Zullinger <tmz@pobox.com> Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack) introduced the --quiet option to receive-pack and made send-pack pass that option. Older versions of receive-pack do not recognize the option, however, and terminate immediately. The commit was therefore reverted. This change instead adds a 'quiet' capability to receive-pack, which is a backwards compatible. In addition, this fixes push --quiet via http: A verbosity of 0 means quiet for remote helpers. Reported-by: Tobias Ulmer <tobiasu@tmux.org> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08 22:06:20 +01:00
cd "$ROOT_PATH"/test_repo_clone &&
test_commit quiet &&
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 10:43:08 +02:00
test_terminal git push --quiet >output 2>&1 &&
fix push --quiet: add 'quiet' capability to receive-pack Currently, git push --quiet produces some non-error output, e.g.: $ git push --quiet Unpacking objects: 100% (3/3), done. This fixes a bug reported for the fedora git package: https://bugzilla.redhat.com/show_bug.cgi?id=725593 Reported-by: Jesse Keating <jkeating@redhat.com> Cc: Todd Zullinger <tmz@pobox.com> Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack) introduced the --quiet option to receive-pack and made send-pack pass that option. Older versions of receive-pack do not recognize the option, however, and terminate immediately. The commit was therefore reverted. This change instead adds a 'quiet' capability to receive-pack, which is a backwards compatible. In addition, this fixes push --quiet via http: A verbosity of 0 means quiet for remote helpers. Reported-by: Tobias Ulmer <tobiasu@tmux.org> Signed-off-by: Clemens Buchacher <drizzd@aon.at> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-01-08 22:06:20 +01:00
test_cmp /dev/null output
'
t5541: test more combinations of --progress Previously, we tested only that "push --quiet --no-progress" was silent. However, there are many other combinations that were not tested: 1. no options at all (but stderr as a tty) 2. --no-progress by itself 3. --quiet by itself 4. --progress (when stderr not a tty) These are tested elsewhere for general "push", but it is important to test them separately for http. It follows a very different code path than git://, and options must be relayed across a remote helper to a separate send-pack process (and in fact cases (1), (2), and (4) have all been broken just for http at some point in the past). We can drop the "--quiet --no-progress" test, as it is not really interesting (it is already handled by testing them separately in (2) and (3) above). Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-05-01 10:43:08 +02:00
test_expect_success TTY 'push --no-progress silences progress but not status' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit no-progress &&
test_terminal git push --no-progress >output 2>&1 &&
grep "^To http" output &&
! grep "^Writing objects"
'
test_expect_success 'push --progress shows progress to non-tty' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit progress &&
git push --progress >output 2>&1 &&
grep "^To http" output &&
grep "^Writing objects" output
'
http-backend: respect existing GIT_COMMITTER_* variables The http-backend program sets default GIT_COMMITTER_NAME and GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and REMOTE_ADDR variables provided by the webserver. However, it unconditionally overwrites any existing GIT_COMMITTER variables, which may have been customized by site-specific code in the webserver (or in a script wrapping http-backend). Let's leave those variables intact if they already exist, assuming that any such configuration was intentional. There is a slight chance of a regression if somebody has set GIT_COMMITTER_* for the entire webserver, not intending it to leak through http-backend. We could protect against this by passing the information in alternate variables. However, it seems unlikely that anyone will care about that regression, and there is value in the simplicity of using the common variable names that are used elsewhere in git. While we're tweaking the environment-handling in http-backend, let's switch it to use argv_array to handle the list of variables. That makes the memory management much simpler. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-30 09:01:30 +02:00
test_expect_success 'http push gives sane defaults to reflog' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit reflog-test &&
git push "$HTTPD_URL"/smart/test_repo.git &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \
log -g -1 --format="%gn <%ge>" >actual &&
echo "anonymous <anonymous@http.127.0.0.1>" >expect &&
test_cmp expect actual
'
test_expect_success 'http push respects GIT_COMMITTER_* in reflog' '
cd "$ROOT_PATH"/test_repo_clone &&
test_commit custom-reflog-test &&
git push "$HTTPD_URL"/smart_custom_env/test_repo.git &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \
log -g -1 --format="%gn <%ge>" >actual &&
echo "Custom User <custom@example.com>" >expect &&
test_cmp expect actual
'
t: test basic smart-http authentication We do not currently test authentication over smart-http at all. In theory, it should work exactly as it does for dumb http (which we do test). It does indeed work for these simple tests, but this patch lays the groundwork for more complex tests in future patches. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 15:25:36 +02:00
test_expect_success 'push over smart http with auth' '
cd "$ROOT_PATH/test_repo_clone" &&
echo push-auth-test >expect &&
test_commit push-auth-test &&
set_askpass user@host &&
git push "$HTTPD_URL"/auth/smart/test_repo.git &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \
log -1 --format=%s >actual &&
expect_askpass both user@host &&
test_cmp expect actual
'
http: prompt for credentials on failed POST All of the smart-http GET requests go through the http_get_* functions, which will prompt for credentials and retry if we see an HTTP 401. POST requests, however, do not go through any central point. Moreover, it is difficult to retry in the general case; we cannot assume the request body fits in memory or is even seekable, and we don't know how much of it was consumed during the attempt. Most of the time, this is not a big deal; for both fetching and pushing, we make a GET request before doing any POSTs, so typically we figure out the credentials during the first request, then reuse them during the POST. However, some servers may allow a client to get the list of refs from receive-pack without authentication, and then require authentication when the client actually tries to POST the pack. This is not ideal, as the client may do a non-trivial amount of work to generate the pack (e.g., delta-compressing objects). However, for a long time it has been the recommended example configuration in git-http-backend(1) for setting up a repository with anonymous fetch and authenticated push. This setup has always been broken without putting a username into the URL. Prior to commit 986bbc0, it did work with a username in the URL, because git would prompt for credentials before making any requests at all. However, post-986bbc0, it is totally broken. Since it has been advertised in the manpage for some time, we should make sure it works. Unfortunately, it is not as easy as simply calling post_rpc again when it fails, due to the input issue mentioned above. However, we can still make this specific case work by retrying in two specific instances: 1. If the request is large (bigger than LARGE_PACKET_MAX), we will first send a probe request with a single flush packet. Since this request is static, we can freely retry it. 2. If the request is small and we are not using gzip, then we have the whole thing in-core, and we can freely retry. That means we will not retry in some instances, including: 1. If we are using gzip. However, we only do so when calling git-upload-pack, so it does not apply to pushes. 2. If we have a large request, the probe succeeds, but then the real POST wants authentication. This is an extremely unlikely configuration and not worth worrying about. While it might be nice to cover those instances, doing so would be significantly more complex for very little real-world gain. In the long run, we will be much better off when curl learns to internally handle authentication as a callback, and we can cleanly handle all cases that way. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 15:27:15 +02:00
test_expect_success 'push to auth-only-for-push repo' '
t: test http access to "half-auth" repositories Some sites set up http access to repositories such that fetching is anonymous and unauthenticated, but pushing is authenticated. While there are multiple ways to do this, the technique advertised in the git-http-backend manpage is to block access to locations matching "/git-receive-pack$". Let's emulate that advice in our test setup, which makes it clear that this advice does not actually work. Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-08-27 15:25:53 +02:00
cd "$ROOT_PATH/test_repo_clone" &&
echo push-half-auth >expect &&
test_commit push-half-auth &&
set_askpass user@host &&
git push "$HTTPD_URL"/auth-push/smart/test_repo.git &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/test_repo.git" \
log -1 --format=%s >actual &&
expect_askpass both user@host &&
test_cmp expect actual
'
doc/http-backend: match query-string in apache half-auth example When setting up a "half-auth" repository in which reads can be done anonymously but writes require authentication, it is best if the server can require authentication for both the ref advertisement and the actual receive-pack POSTs. This alleviates the need for the admin to set http.receivepack in the repositories, and means that the client is challenged for credentials immediately, instead of partway through the push process (and git clients older than v1.7.11.7 had trouble handling these challenges). Since detecting a push during the ref advertisement requires matching the query string, and this is non-trivial to do in Apache, we have traditionally punted and instructed users to just protect "/git-receive-pack$". This patch provides the mod_rewrite recipe to actually match the ref advertisement, which is preferred. While we're at it, let's add the recipe to our test scripts so that we can be sure that it works, and doesn't get broken (either by our changes or by changes in Apache). Signed-off-by: Jeff King <peff@peff.net> Acked-by: Jakub Narębski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-13 05:33:36 +02:00
test_expect_success 'create repo without http.receivepack set' '
cd "$ROOT_PATH" &&
git init half-auth &&
(
cd half-auth &&
test_commit one
) &&
git clone --bare half-auth "$HTTPD_DOCUMENT_ROOT_PATH/half-auth.git"
'
test_expect_success 'clone via half-auth-complete does not need password' '
cd "$ROOT_PATH" &&
set_askpass wrong &&
git clone "$HTTPD_URL"/half-auth-complete/smart/half-auth.git \
half-auth-clone &&
expect_askpass none
'
test_expect_success 'push into half-auth-complete requires password' '
cd "$ROOT_PATH/half-auth-clone" &&
echo two >expect &&
test_commit two &&
set_askpass user@host &&
git push "$HTTPD_URL/half-auth-complete/smart/half-auth.git" &&
git --git-dir="$HTTPD_DOCUMENT_ROOT_PATH/half-auth.git" \
log -1 --format=%s >actual &&
expect_askpass both user@host &&
test_cmp expect actual
'
test smart http fetch and push The top level directory "/smart/" of the test Apache server is mapped through our git-http-backend CGI, but uses the same underlying repository space as the server's document root. This is the most simple installation possible. Server logs are checked to verify the client has accessed only the smart URLs during the test. During fetch testing the headers are also logged from libcurl to ensure we are making a reasonably sane HTTP request, and getting back reasonably sane response headers from the CGI. When validating the request headers used during smart fetch we munge away the actual Content-Length and replace it with the placeholder "xxx". This avoids unnecessary varability in the test caused by an unrelated change in the requested capabilities in the first want line of the request. However, we still want to look for and verify that Content-Length was used, because smaller payloads should be using Content-Length and not "Transfer-Encoding: chunked". When validating the server response headers we must discard both Content-Length and Transfer-Encoding, as Apache2 can use either format to return our response. During development of this test I observed Apache returning both forms, depending on when the processes got CPU time. If our CGI returned the pack data quickly, Apache just buffered the whole thing and returned a Content-Length. If our CGI took just a bit too long to complete, Apache flushed its buffer and instead used "Transfer-Encoding: chunked". Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-10-31 01:47:47 +01:00
stop_httpd
test_done
Copy permalink