git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
/*
|
|
|
|
|
* "git push"
|
|
|
|
|
*/
|
|
|
|
|
#include "cache.h"
|
|
|
|
|
#include "refs.h"
|
|
|
|
|
#include "run-command.h"
|
|
|
|
|
#include "builtin.h"
|
2007-05-12 17:45:53 +02:00
|
|
|
#include "remote.h"
|
2007-09-11 05:03:04 +02:00
|
|
|
#include "transport.h"
|
2007-11-05 04:35:37 +01:00
|
|
|
#include "parse-options.h"
|
2011-08-20 00:08:47 +02:00
|
|
|
#include "submodule.h"
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
|
2007-11-05 04:35:37 +01:00
|
|
|
static const char * const push_usage[] = {
|
2012-08-20 14:32:33 +02:00
|
|
|
N_("git push [<options>] [<repository> [<refspec>...]]"),
|
2007-11-05 04:35:37 +01:00
|
|
|
NULL,
|
|
|
|
|
};
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
|
2008-07-20 14:02:20 +02:00
|
|
|
static int thin;
|
2009-12-30 20:57:42 +01:00
|
|
|
static int deleterefs;
|
2007-01-19 13:49:27 +01:00
|
|
|
static const char *receivepack;
|
2010-02-24 13:50:24 +01:00
|
|
|
static int verbosity;
|
2012-02-13 21:17:15 +01:00
|
|
|
static int progress = -1;
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
|
2006-08-15 19:23:48 +02:00
|
|
|
static const char **refspec;
|
|
|
|
|
static int refspec_nr;
|
2010-07-31 14:54:55 +02:00
|
|
|
static int refspec_alloc;
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
static int default_matching_used;
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
|
|
|
|
|
static void add_refspec(const char *ref)
|
|
|
|
|
{
|
2010-07-31 14:54:55 +02:00
|
|
|
refspec_nr++;
|
|
|
|
|
ALLOC_GROW(refspec, refspec_nr, refspec_alloc);
|
|
|
|
|
refspec[refspec_nr-1] = ref;
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void set_refspecs(const char **refs, int nr)
|
|
|
|
|
{
|
2007-05-25 07:20:56 +02:00
|
|
|
int i;
|
|
|
|
|
for (i = 0; i < nr; i++) {
|
|
|
|
|
const char *ref = refs[i];
|
|
|
|
|
if (!strcmp("tag", ref)) {
|
|
|
|
|
char *tag;
|
|
|
|
|
int len;
|
|
|
|
|
if (nr <= ++i)
|
2011-02-23 00:42:11 +01:00
|
|
|
die(_("tag shorthand without <tag>"));
|
2007-05-25 07:20:56 +02:00
|
|
|
len = strlen(refs[i]) + 11;
|
2009-12-30 20:57:42 +01:00
|
|
|
if (deleterefs) {
|
|
|
|
|
tag = xmalloc(len+1);
|
|
|
|
|
strcpy(tag, ":refs/tags/");
|
|
|
|
|
} else {
|
|
|
|
|
tag = xmalloc(len);
|
|
|
|
|
strcpy(tag, "refs/tags/");
|
|
|
|
|
}
|
2007-05-25 07:20:56 +02:00
|
|
|
strcat(tag, refs[i]);
|
|
|
|
|
ref = tag;
|
2009-12-30 20:57:42 +01:00
|
|
|
} else if (deleterefs && !strchr(ref, ':')) {
|
|
|
|
|
char *delref;
|
|
|
|
|
int len = strlen(ref)+1;
|
2010-01-29 11:31:30 +01:00
|
|
|
delref = xmalloc(len+1);
|
2009-12-30 20:57:42 +01:00
|
|
|
strcpy(delref, ":");
|
|
|
|
|
strcat(delref, ref);
|
|
|
|
|
ref = delref;
|
|
|
|
|
} else if (deleterefs)
|
2011-02-23 00:42:11 +01:00
|
|
|
die(_("--delete only accepts plain target ref names"));
|
2007-05-25 07:20:56 +02:00
|
|
|
add_refspec(ref);
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
push: error out when the "upstream" semantics does not make sense
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-31 01:07:12 +02:00
|
|
|
static int push_url_of_remote(struct remote *remote, const char ***url_p)
|
|
|
|
|
{
|
|
|
|
|
if (remote->pushurl_nr) {
|
|
|
|
|
*url_p = remote->pushurl;
|
|
|
|
|
return remote->pushurl_nr;
|
|
|
|
|
}
|
|
|
|
|
*url_p = remote->url;
|
|
|
|
|
return remote->url_nr;
|
|
|
|
|
}
|
|
|
|
|
|
2012-04-24 09:50:03 +02:00
|
|
|
static NORETURN int die_push_simple(struct branch *branch, struct remote *remote) {
|
|
|
|
|
/*
|
|
|
|
|
* There's no point in using shorten_unambiguous_ref here,
|
|
|
|
|
* as the ambiguity would be on the remote side, not what
|
|
|
|
|
* we have locally. Plus, this is supposed to be the simple
|
|
|
|
|
* mode. If the user is doing something crazy like setting
|
|
|
|
|
* upstream to a non-branch, we should probably be showing
|
|
|
|
|
* them the big ugly fully qualified ref.
|
|
|
|
|
*/
|
|
|
|
|
const char *advice_maybe = "";
|
|
|
|
|
const char *short_upstream =
|
|
|
|
|
skip_prefix(branch->merge[0]->src, "refs/heads/");
|
|
|
|
|
|
|
|
|
|
if (!short_upstream)
|
|
|
|
|
short_upstream = branch->merge[0]->src;
|
|
|
|
|
/*
|
|
|
|
|
* Don't show advice for people who explicitely set
|
|
|
|
|
* push.default.
|
|
|
|
|
*/
|
|
|
|
|
if (push_default == PUSH_DEFAULT_UNSPECIFIED)
|
|
|
|
|
advice_maybe = _("\n"
|
|
|
|
|
"To choose either option permanently, "
|
|
|
|
|
"see push.default in 'git help config'.");
|
|
|
|
|
die(_("The upstream branch of your current branch does not match\n"
|
|
|
|
|
"the name of your current branch. To push to the upstream branch\n"
|
|
|
|
|
"on the remote, use\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" git push %s HEAD:%s\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"To push to the branch of the same name on the remote, use\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" git push %s %s\n"
|
|
|
|
|
"%s"),
|
|
|
|
|
remote->name, short_upstream,
|
|
|
|
|
remote->name, branch->name, advice_maybe);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void setup_push_upstream(struct remote *remote, int simple)
|
2009-03-16 16:42:51 +01:00
|
|
|
{
|
|
|
|
|
struct strbuf refspec = STRBUF_INIT;
|
|
|
|
|
struct branch *branch = branch_get(NULL);
|
|
|
|
|
if (!branch)
|
2011-04-02 02:55:55 +02:00
|
|
|
die(_("You are not currently on a branch.\n"
|
2011-03-02 21:12:10 +01:00
|
|
|
"To push the history leading to the current (detached HEAD)\n"
|
|
|
|
|
"state now, use\n"
|
|
|
|
|
"\n"
|
2011-04-02 02:55:55 +02:00
|
|
|
" git push %s HEAD:<name-of-remote-branch>\n"),
|
2011-03-02 21:12:10 +01:00
|
|
|
remote->name);
|
push: error out when the "upstream" semantics does not make sense
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-31 01:07:12 +02:00
|
|
|
if (!branch->merge_nr || !branch->merge || !branch->remote_name)
|
2011-04-02 02:55:55 +02:00
|
|
|
die(_("The current branch %s has no upstream branch.\n"
|
2011-03-02 21:12:10 +01:00
|
|
|
"To push the current branch and set the remote as upstream, use\n"
|
|
|
|
|
"\n"
|
2011-04-02 02:55:55 +02:00
|
|
|
" git push --set-upstream %s %s\n"),
|
2011-03-02 21:12:10 +01:00
|
|
|
branch->name,
|
|
|
|
|
remote->name,
|
2009-03-16 16:42:51 +01:00
|
|
|
branch->name);
|
|
|
|
|
if (branch->merge_nr != 1)
|
2011-04-02 02:55:55 +02:00
|
|
|
die(_("The current branch %s has multiple upstream branches, "
|
2011-02-23 00:42:11 +01:00
|
|
|
"refusing to push."), branch->name);
|
push: error out when the "upstream" semantics does not make sense
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-31 01:07:12 +02:00
|
|
|
if (strcmp(branch->remote_name, remote->name))
|
|
|
|
|
die(_("You are pushing to remote '%s', which is not the upstream of\n"
|
|
|
|
|
"your current branch '%s', without telling me what to push\n"
|
|
|
|
|
"to update which remote branch."),
|
|
|
|
|
remote->name, branch->name);
|
2012-04-24 09:50:03 +02:00
|
|
|
if (simple && strcmp(branch->refname, branch->merge[0]->src))
|
|
|
|
|
die_push_simple(branch, remote);
|
push: error out when the "upstream" semantics does not make sense
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-31 01:07:12 +02:00
|
|
|
|
2009-03-16 16:42:51 +01:00
|
|
|
strbuf_addf(&refspec, "%s:%s", branch->name, branch->merge[0]->src);
|
|
|
|
|
add_refspec(refspec.buf);
|
|
|
|
|
}
|
|
|
|
|
|
2012-06-24 13:01:37 +02:00
|
|
|
static char warn_unspecified_push_default_msg[] =
|
|
|
|
|
N_("push.default is unset; its implicit value is changing in\n"
|
|
|
|
|
"Git 2.0 from 'matching' to 'simple'. To squelch this message\n"
|
|
|
|
|
"and maintain the current behavior after the default changes, use:\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" git config --global push.default matching\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"To squelch this message and adopt the new behavior now, use:\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" git config --global push.default simple\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"See 'git help config' and search for 'push.default' for further information.\n"
|
|
|
|
|
"(the 'simple' mode was introduced in Git 1.7.11. Use the similar mode\n"
|
|
|
|
|
"'current' instead of 'simple' if you sometimes use older versions of Git)");
|
|
|
|
|
|
|
|
|
|
static void warn_unspecified_push_default_configuration(void)
|
|
|
|
|
{
|
|
|
|
|
static int warn_once;
|
|
|
|
|
|
|
|
|
|
if (warn_once++)
|
|
|
|
|
return;
|
|
|
|
|
warning("%s\n", _(warn_unspecified_push_default_msg));
|
|
|
|
|
}
|
|
|
|
|
|
2011-03-02 21:12:10 +01:00
|
|
|
static void setup_default_push_refspecs(struct remote *remote)
|
2009-03-16 16:42:51 +01:00
|
|
|
{
|
|
|
|
|
switch (push_default) {
|
2009-07-19 02:19:47 +02:00
|
|
|
default:
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
case PUSH_DEFAULT_UNSPECIFIED:
|
|
|
|
|
default_matching_used = 1;
|
2012-06-24 13:01:37 +02:00
|
|
|
warn_unspecified_push_default_configuration();
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
/* fallthru */
|
2009-03-16 16:42:51 +01:00
|
|
|
case PUSH_DEFAULT_MATCHING:
|
|
|
|
|
add_refspec(":");
|
|
|
|
|
break;
|
|
|
|
|
|
2012-04-24 09:50:03 +02:00
|
|
|
case PUSH_DEFAULT_SIMPLE:
|
|
|
|
|
setup_push_upstream(remote, 1);
|
|
|
|
|
break;
|
|
|
|
|
|
2011-02-16 01:54:24 +01:00
|
|
|
case PUSH_DEFAULT_UPSTREAM:
|
2012-04-24 09:50:03 +02:00
|
|
|
setup_push_upstream(remote, 0);
|
2009-03-16 16:42:51 +01:00
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case PUSH_DEFAULT_CURRENT:
|
|
|
|
|
add_refspec("HEAD");
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case PUSH_DEFAULT_NOTHING:
|
2011-02-23 00:42:11 +01:00
|
|
|
die(_("You didn't specify any refspecs to push, and "
|
|
|
|
|
"push.default is \"nothing\"."));
|
2009-03-16 16:42:51 +01:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
static const char message_advice_pull_before_push[] =
|
|
|
|
|
N_("Updates were rejected because the tip of your current branch is behind\n"
|
|
|
|
|
"its remote counterpart. Merge the remote changes (e.g. 'git pull')\n"
|
|
|
|
|
"before pushing again.\n"
|
|
|
|
|
"See the 'Note about fast-forwards' in 'git push --help' for details.");
|
|
|
|
|
|
|
|
|
|
static const char message_advice_use_upstream[] =
|
|
|
|
|
N_("Updates were rejected because a pushed branch tip is behind its remote\n"
|
|
|
|
|
"counterpart. If you did not intend to push that branch, you may want to\n"
|
2012-06-24 13:01:37 +02:00
|
|
|
"specify branches to push or set the 'push.default' configuration variable\n"
|
|
|
|
|
"to 'simple', 'current' or 'upstream' to push only the current branch.");
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
|
|
|
|
|
static const char message_advice_checkout_pull_push[] =
|
|
|
|
|
N_("Updates were rejected because a pushed branch tip is behind its remote\n"
|
|
|
|
|
"counterpart. Check out this branch and merge the remote changes\n"
|
|
|
|
|
"(e.g. 'git pull') before pushing again.\n"
|
|
|
|
|
"See the 'Note about fast-forwards' in 'git push --help' for details.");
|
|
|
|
|
|
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23 22:55:30 +01:00
|
|
|
static const char message_advice_ref_fetch_first[] =
|
|
|
|
|
N_("Updates were rejected because the remote contains work that you do\n"
|
|
|
|
|
"not have locally. This is usually caused by another repository pushing\n"
|
|
|
|
|
"to the same ref. You may want to first merge the remote changes (e.g.,\n"
|
|
|
|
|
"'git pull') before pushing again.\n"
|
|
|
|
|
"See the 'Note about fast-forwards' in 'git push --help' for details.");
|
|
|
|
|
|
2012-11-30 02:41:34 +01:00
|
|
|
static const char message_advice_ref_already_exists[] =
|
2013-01-25 06:09:00 +01:00
|
|
|
N_("Updates were rejected because the tag already exists in the remote.");
|
2012-11-30 02:41:34 +01:00
|
|
|
|
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23 22:55:30 +01:00
|
|
|
static const char message_advice_ref_needs_force[] =
|
|
|
|
|
N_("You cannot update a remote ref that points at a non-commit object,\n"
|
|
|
|
|
"or update a remote ref to make it point at a non-commit object,\n"
|
|
|
|
|
"without using the '--force' option.\n");
|
2012-11-30 02:41:34 +01:00
|
|
|
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
static void advise_pull_before_push(void)
|
|
|
|
|
{
|
2012-12-03 04:27:50 +01:00
|
|
|
if (!advice_push_non_ff_current || !advice_push_update_rejected)
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
return;
|
|
|
|
|
advise(_(message_advice_pull_before_push));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void advise_use_upstream(void)
|
|
|
|
|
{
|
2012-12-03 04:27:50 +01:00
|
|
|
if (!advice_push_non_ff_default || !advice_push_update_rejected)
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
return;
|
|
|
|
|
advise(_(message_advice_use_upstream));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void advise_checkout_pull_push(void)
|
|
|
|
|
{
|
2012-12-03 04:27:50 +01:00
|
|
|
if (!advice_push_non_ff_matching || !advice_push_update_rejected)
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
return;
|
|
|
|
|
advise(_(message_advice_checkout_pull_push));
|
|
|
|
|
}
|
|
|
|
|
|
2012-11-30 02:41:34 +01:00
|
|
|
static void advise_ref_already_exists(void)
|
|
|
|
|
{
|
2012-12-03 04:27:51 +01:00
|
|
|
if (!advice_push_already_exists || !advice_push_update_rejected)
|
|
|
|
|
return;
|
2012-11-30 02:41:34 +01:00
|
|
|
advise(_(message_advice_ref_already_exists));
|
|
|
|
|
}
|
|
|
|
|
|
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23 22:55:30 +01:00
|
|
|
static void advise_ref_fetch_first(void)
|
|
|
|
|
{
|
|
|
|
|
if (!advice_push_fetch_first || !advice_push_update_rejected)
|
|
|
|
|
return;
|
|
|
|
|
advise(_(message_advice_ref_fetch_first));
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void advise_ref_needs_force(void)
|
|
|
|
|
{
|
|
|
|
|
if (!advice_push_needs_force || !advice_push_update_rejected)
|
|
|
|
|
return;
|
|
|
|
|
advise(_(message_advice_ref_needs_force));
|
|
|
|
|
}
|
|
|
|
|
|
2009-11-18 02:42:22 +01:00
|
|
|
static int push_with_options(struct transport *transport, int flags)
|
|
|
|
|
{
|
|
|
|
|
int err;
|
2012-11-30 02:41:33 +01:00
|
|
|
unsigned int reject_reasons;
|
2010-02-24 13:50:24 +01:00
|
|
|
|
2010-02-24 13:50:27 +01:00
|
|
|
transport_set_verbosity(transport, verbosity, progress);
|
2010-02-24 13:50:24 +01:00
|
|
|
|
2009-11-18 02:42:22 +01:00
|
|
|
if (receivepack)
|
|
|
|
|
transport_set_option(transport,
|
|
|
|
|
TRANS_OPT_RECEIVEPACK, receivepack);
|
|
|
|
|
if (thin)
|
|
|
|
|
transport_set_option(transport, TRANS_OPT_THIN, "yes");
|
|
|
|
|
|
2010-02-24 13:50:24 +01:00
|
|
|
if (verbosity > 0)
|
2011-02-23 00:42:11 +01:00
|
|
|
fprintf(stderr, _("Pushing to %s\n"), transport->url);
|
2009-11-18 02:42:22 +01:00
|
|
|
err = transport_push(transport, refspec_nr, refspec, flags,
|
2012-11-30 02:41:33 +01:00
|
|
|
&reject_reasons);
|
2009-12-04 00:31:44 +01:00
|
|
|
if (err != 0)
|
2011-02-23 00:42:11 +01:00
|
|
|
error(_("failed to push some refs to '%s'"), transport->url);
|
2009-12-04 00:31:44 +01:00
|
|
|
|
2009-11-18 02:42:22 +01:00
|
|
|
err |= transport_disconnect(transport);
|
|
|
|
|
if (!err)
|
|
|
|
|
return 0;
|
|
|
|
|
|
2012-11-30 02:41:33 +01:00
|
|
|
if (reject_reasons & REJECT_NON_FF_HEAD) {
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
advise_pull_before_push();
|
2012-11-30 02:41:33 +01:00
|
|
|
} else if (reject_reasons & REJECT_NON_FF_OTHER) {
|
push: Provide situational hints for non-fast-forward errors
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-20 05:31:33 +01:00
|
|
|
if (default_matching_used)
|
|
|
|
|
advise_use_upstream();
|
|
|
|
|
else
|
|
|
|
|
advise_checkout_pull_push();
|
2012-11-30 02:41:34 +01:00
|
|
|
} else if (reject_reasons & REJECT_ALREADY_EXISTS) {
|
|
|
|
|
advise_ref_already_exists();
|
push: introduce REJECT_FETCH_FIRST and REJECT_NEEDS_FORCE
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-01-23 22:55:30 +01:00
|
|
|
} else if (reject_reasons & REJECT_FETCH_FIRST) {
|
|
|
|
|
advise_ref_fetch_first();
|
|
|
|
|
} else if (reject_reasons & REJECT_NEEDS_FORCE) {
|
|
|
|
|
advise_ref_needs_force();
|
2009-11-18 02:42:22 +01:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
2007-09-11 05:03:04 +02:00
|
|
|
static int do_push(const char *repo, int flags)
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
{
|
2007-05-12 17:45:53 +02:00
|
|
|
int i, errs;
|
remote.c: introduce a way to have different remotes for fetch/push
Currently, do_push() in push.c calls remote_get(), which gets the
configured remote for fetching and pushing. Replace this call with a
call to pushremote_get() instead, a new function that will return the
remote configured specifically for pushing. This function tries to
work with the string pushremote_name, before falling back to the
codepath of remote_get(). This patch has no visible impact, but
serves to enable future patches to introduce configuration variables
to set pushremote_name. For example, you can now do the following in
handle_config():
if (!strcmp(key, "remote.pushdefault"))
git_config_string(&pushremote_name, key, value);
Then, pushes will automatically go to the remote specified by
remote.pushdefault.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2013-04-02 09:40:32 +02:00
|
|
|
struct remote *remote = pushremote_get(repo);
|
2009-06-09 18:01:34 +02:00
|
|
|
const char **url;
|
|
|
|
|
int url_nr;
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
|
Give error when no remote is configured
When there's no explicitly-named remote, we use the remote specified
for the current branch, which in turn defaults to "origin". But it
this case should require the remote to actually be configured, and not
fall back to the path "origin".
Possibly, the config file's "remote = something" should require the
something to be a configured remote instead of a bare repository URL,
but we actually test with a bare repository URL.
In fetch, we were giving the sensible error message when coming up
with a URL failed, but this wasn't actually reachable, so move that
error up and use it when appropriate.
In push, we need a new error message, because the old one (formerly
unreachable without a lot of help) used the repo name, which was NULL.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-11 06:47:20 +01:00
|
|
|
if (!remote) {
|
|
|
|
|
if (repo)
|
2011-02-23 00:42:11 +01:00
|
|
|
die(_("bad repository '%s'"), repo);
|
2011-04-02 02:55:55 +02:00
|
|
|
die(_("No configured push destination.\n"
|
2011-03-02 21:12:11 +01:00
|
|
|
"Either specify the URL from the command-line or configure a remote repository using\n"
|
|
|
|
|
"\n"
|
|
|
|
|
" git remote add <name> <url>\n"
|
|
|
|
|
"\n"
|
|
|
|
|
"and then push using the remote name\n"
|
|
|
|
|
"\n"
|
2011-04-02 02:55:55 +02:00
|
|
|
" git push <name>\n"));
|
Give error when no remote is configured
When there's no explicitly-named remote, we use the remote specified
for the current branch, which in turn defaults to "origin". But it
this case should require the remote to actually be configured, and not
fall back to the path "origin".
Possibly, the config file's "remote = something" should require the
something to be a configured remote instead of a bare repository URL,
but we actually test with a bare repository URL.
In fetch, we were giving the sensible error message when coming up
with a URL failed, but this wasn't actually reachable, so move that
error up and use it when appropriate.
In push, we need a new error message, because the old one (formerly
unreachable without a lot of help) used the repo name, which was NULL.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2009-03-11 06:47:20 +01:00
|
|
|
}
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
|
2008-04-17 13:17:20 +02:00
|
|
|
if (remote->mirror)
|
|
|
|
|
flags |= (TRANSPORT_PUSH_MIRROR|TRANSPORT_PUSH_FORCE);
|
|
|
|
|
|
2008-08-16 19:58:32 +02:00
|
|
|
if ((flags & TRANSPORT_PUSH_ALL) && refspec) {
|
|
|
|
|
if (!strcmp(*refspec, "refs/tags/*"))
|
2011-02-23 00:42:11 +01:00
|
|
|
return error(_("--all and --tags are incompatible"));
|
|
|
|
|
return error(_("--all can't be combined with refspecs"));
|
2008-08-16 19:58:32 +02:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ((flags & TRANSPORT_PUSH_MIRROR) && refspec) {
|
|
|
|
|
if (!strcmp(*refspec, "refs/tags/*"))
|
2011-02-23 00:42:11 +01:00
|
|
|
return error(_("--mirror and --tags are incompatible"));
|
|
|
|
|
return error(_("--mirror can't be combined with refspecs"));
|
2008-08-16 19:58:32 +02:00
|
|
|
}
|
2008-04-17 13:17:20 +02:00
|
|
|
|
|
|
|
|
if ((flags & (TRANSPORT_PUSH_ALL|TRANSPORT_PUSH_MIRROR)) ==
|
|
|
|
|
(TRANSPORT_PUSH_ALL|TRANSPORT_PUSH_MIRROR)) {
|
2011-02-23 00:42:11 +01:00
|
|
|
return error(_("--all and --mirror are incompatible"));
|
2008-04-17 13:17:20 +02:00
|
|
|
}
|
|
|
|
|
|
2009-03-16 16:42:51 +01:00
|
|
|
if (!refspec && !(flags & TRANSPORT_PUSH_ALL)) {
|
|
|
|
|
if (remote->push_refspec_nr) {
|
|
|
|
|
refspec = remote->push_refspec;
|
|
|
|
|
refspec_nr = remote->push_refspec_nr;
|
|
|
|
|
} else if (!(flags & TRANSPORT_PUSH_MIRROR))
|
2011-03-02 21:12:10 +01:00
|
|
|
setup_default_push_refspecs(remote);
|
2007-05-12 17:45:53 +02:00
|
|
|
}
|
2007-04-07 08:04:53 +02:00
|
|
|
errs = 0;
|
push: error out when the "upstream" semantics does not make sense
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2012-03-31 01:07:12 +02:00
|
|
|
url_nr = push_url_of_remote(remote, &url);
|
2009-11-18 02:42:22 +01:00
|
|
|
if (url_nr) {
|
|
|
|
|
for (i = 0; i < url_nr; i++) {
|
|
|
|
|
struct transport *transport =
|
|
|
|
|
transport_get(remote, url[i]);
|
|
|
|
|
if (push_with_options(transport, flags))
|
|
|
|
|
errs++;
|
2009-08-08 09:51:08 +02:00
|
|
|
}
|
2009-11-18 02:42:22 +01:00
|
|
|
} else {
|
|
|
|
|
struct transport *transport =
|
|
|
|
|
transport_get(remote, NULL);
|
|
|
|
|
|
|
|
|
|
if (push_with_options(transport, flags))
|
|
|
|
|
errs++;
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
}
|
2007-04-07 08:04:53 +02:00
|
|
|
return !!errs;
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
}
|
|
|
|
|
|
2011-08-20 00:08:47 +02:00
|
|
|
static int option_parse_recurse_submodules(const struct option *opt,
|
|
|
|
|
const char *arg, int unset)
|
|
|
|
|
{
|
|
|
|
|
int *flags = opt->value;
|
2012-03-29 09:21:24 +02:00
|
|
|
|
|
|
|
|
if (*flags & (TRANSPORT_RECURSE_SUBMODULES_CHECK |
|
|
|
|
|
TRANSPORT_RECURSE_SUBMODULES_ON_DEMAND))
|
|
|
|
|
die("%s can only be used once.", opt->long_name);
|
|
|
|
|
|
2011-08-20 00:08:47 +02:00
|
|
|
if (arg) {
|
|
|
|
|
if (!strcmp(arg, "check"))
|
|
|
|
|
*flags |= TRANSPORT_RECURSE_SUBMODULES_CHECK;
|
2012-03-29 09:21:24 +02:00
|
|
|
else if (!strcmp(arg, "on-demand"))
|
|
|
|
|
*flags |= TRANSPORT_RECURSE_SUBMODULES_ON_DEMAND;
|
2011-08-20 00:08:47 +02:00
|
|
|
else
|
|
|
|
|
die("bad %s argument: %s", opt->long_name, arg);
|
|
|
|
|
} else
|
2012-03-29 09:21:24 +02:00
|
|
|
die("option %s needs an argument (check|on-demand)",
|
|
|
|
|
opt->long_name);
|
2011-08-20 00:08:47 +02:00
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-07-29 07:44:25 +02:00
|
|
|
int cmd_push(int argc, const char **argv, const char *prefix)
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
{
|
2007-09-11 05:03:04 +02:00
|
|
|
int flags = 0;
|
2007-11-05 04:35:37 +01:00
|
|
|
int tags = 0;
|
2008-04-17 13:17:20 +02:00
|
|
|
int rc;
|
2007-05-12 17:45:53 +02:00
|
|
|
const char *repo = NULL; /* default repository */
|
2007-11-05 04:35:37 +01:00
|
|
|
struct option options[] = {
|
2010-02-24 13:50:24 +01:00
|
|
|
OPT__VERBOSITY(&verbosity),
|
2012-08-20 14:32:33 +02:00
|
|
|
OPT_STRING( 0 , "repo", &repo, N_("repository"), N_("repository")),
|
|
|
|
|
OPT_BIT( 0 , "all", &flags, N_("push all refs"), TRANSPORT_PUSH_ALL),
|
|
|
|
|
OPT_BIT( 0 , "mirror", &flags, N_("mirror all refs"),
|
2008-07-20 14:02:20 +02:00
|
|
|
(TRANSPORT_PUSH_MIRROR|TRANSPORT_PUSH_FORCE)),
|
2012-08-20 14:32:33 +02:00
|
|
|
OPT_BOOLEAN( 0, "delete", &deleterefs, N_("delete refs")),
|
|
|
|
|
OPT_BOOLEAN( 0 , "tags", &tags, N_("push tags (can't be used with --all or --mirror)")),
|
|
|
|
|
OPT_BIT('n' , "dry-run", &flags, N_("dry run"), TRANSPORT_PUSH_DRY_RUN),
|
|
|
|
|
OPT_BIT( 0, "porcelain", &flags, N_("machine-readable output"), TRANSPORT_PUSH_PORCELAIN),
|
|
|
|
|
OPT_BIT('f', "force", &flags, N_("force updates"), TRANSPORT_PUSH_FORCE),
|
|
|
|
|
{ OPTION_CALLBACK, 0, "recurse-submodules", &flags, N_("check"),
|
2012-08-20 14:32:55 +02:00
|
|
|
N_("control recursive pushing of submodules"),
|
2011-08-20 00:08:47 +02:00
|
|
|
PARSE_OPT_OPTARG, option_parse_recurse_submodules },
|
2012-08-20 14:32:33 +02:00
|
|
|
OPT_BOOLEAN( 0 , "thin", &thin, N_("use thin pack")),
|
|
|
|
|
OPT_STRING( 0 , "receive-pack", &receivepack, "receive-pack", N_("receive pack program")),
|
|
|
|
|
OPT_STRING( 0 , "exec", &receivepack, "receive-pack", N_("receive pack program")),
|
|
|
|
|
OPT_BIT('u', "set-upstream", &flags, N_("set upstream for git pull/status"),
|
2010-01-16 22:45:31 +01:00
|
|
|
TRANSPORT_PUSH_SET_UPSTREAM),
|
2012-08-20 14:32:33 +02:00
|
|
|
OPT_BOOL(0, "progress", &progress, N_("force progress reporting")),
|
|
|
|
|
OPT_BIT(0, "prune", &flags, N_("prune locally removed refs"),
|
2012-02-22 23:43:41 +01:00
|
|
|
TRANSPORT_PUSH_PRUNE),
|
2013-01-13 06:17:03 +01:00
|
|
|
OPT_BIT(0, "no-verify", &flags, N_("bypass pre-push hook"), TRANSPORT_PUSH_NO_HOOK),
|
2013-03-04 21:09:50 +01:00
|
|
|
OPT_BIT(0, "follow-tags", &flags, N_("push missing but relevant tags"),
|
|
|
|
|
TRANSPORT_PUSH_FOLLOW_TAGS),
|
2007-11-05 04:35:37 +01:00
|
|
|
OPT_END()
|
|
|
|
|
};
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
|
2011-02-24 15:30:19 +01:00
|
|
|
packet_trace_identity("push");
|
2009-10-25 20:15:22 +01:00
|
|
|
git_config(git_default_config, NULL);
|
2009-05-23 20:53:12 +02:00
|
|
|
argc = parse_options(argc, argv, prefix, options, push_usage, 0);
|
2007-11-05 04:35:37 +01:00
|
|
|
|
2009-12-30 20:57:42 +01:00
|
|
|
if (deleterefs && (tags || (flags & (TRANSPORT_PUSH_ALL | TRANSPORT_PUSH_MIRROR))))
|
2011-02-23 00:42:11 +01:00
|
|
|
die(_("--delete is incompatible with --all, --mirror and --tags"));
|
2009-12-30 20:57:42 +01:00
|
|
|
if (deleterefs && argc < 2)
|
2011-02-23 00:42:11 +01:00
|
|
|
die(_("--delete doesn't make sense without any refs"));
|
2009-12-30 20:57:42 +01:00
|
|
|
|
2007-11-05 04:35:37 +01:00
|
|
|
if (tags)
|
|
|
|
|
add_refspec("refs/tags/*");
|
|
|
|
|
|
|
|
|
|
if (argc > 0) {
|
|
|
|
|
repo = argv[0];
|
|
|
|
|
set_refspecs(argv + 1, argc - 1);
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
}
|
2007-05-25 07:20:56 +02:00
|
|
|
|
2008-04-17 13:17:20 +02:00
|
|
|
rc = do_push(repo, flags);
|
|
|
|
|
if (rc == -1)
|
2007-11-10 00:32:25 +01:00
|
|
|
usage_with_options(push_usage, options);
|
2008-04-17 13:17:20 +02:00
|
|
|
else
|
|
|
|
|
return rc;
|
git builtin "push"
This adds a builtin "push" command, which is largely just a C'ification of
the "git-push.sh" script.
Now, the reason I did it as a built-in is partly because it's yet another
step on relying less on shell, but it's actually mostly because I've
wanted to be able to push to _multiple_ repositories, and the most obvious
and simplest interface for that would seem be to just have a "remotes"
file that has multiple URL entries.
(For "pull", having multiple entries should either just select the first
one, or you could fall back on the others on failure - your choice).
And quite frankly, it just became too damn messy to do that in shell.
Besides, we actually have a fair amount of infrastructure in C, so it just
wasn't that hard to do.
Of course, this is almost totally untested. It probably doesn't work for
anything but the one trial I threw at it. "Simple" doesn't necessarily
mean "obviously correct".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-04-30 06:22:49 +02:00
|
|
|
}
|