Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
/*
|
|
|
|
|
* LibXDiff by Davide Libenzi ( File Differential Library )
|
|
|
|
|
* Copyright (C) 2003 Davide Libenzi
|
|
|
|
|
*
|
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
|
|
|
*
|
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
|
* Lesser General Public License for more details.
|
|
|
|
|
*
|
|
|
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
|
|
|
* License along with this library; if not, write to the Free Software
|
|
|
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
|
|
|
*
|
|
|
|
|
* Davide Libenzi <davidel@xmailserver.org>
|
|
|
|
|
*
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include "xinclude.h"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
#define XDL_MAX_COST_MIN 256
|
|
|
|
|
#define XDL_HEUR_MIN_COST 256
|
2009-07-22 23:34:34 +02:00
|
|
|
#define XDL_LINE_MAX (long)((1UL << (CHAR_BIT * sizeof(long) - 1)) - 1)
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
#define XDL_SNAKE_CNT 20
|
|
|
|
|
#define XDL_K_HEUR 4
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
typedef struct s_xdpsplit {
|
|
|
|
|
long i1, i2;
|
|
|
|
|
int min_lo, min_hi;
|
|
|
|
|
} xdpsplit_t;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static long xdl_split(unsigned long const *ha1, long off1, long lim1,
|
|
|
|
|
unsigned long const *ha2, long off2, long lim2,
|
|
|
|
|
long *kvdf, long *kvdb, int need_min, xdpsplit_t *spl,
|
|
|
|
|
xdalgoenv_t *xenv);
|
|
|
|
|
static xdchange_t *xdl_add_change(xdchange_t *xscr, long i1, long i2, long chg1, long chg2);
|
2006-04-14 01:45:13 +02:00
|
|
|
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* See "An O(ND) Difference Algorithm and its Variations", by Eugene Myers.
|
|
|
|
|
* Basically considers a "box" (off1, off2, lim1, lim2) and scan from both
|
|
|
|
|
* the forward diagonal starting from (off1, off2) and the backward diagonal
|
|
|
|
|
* starting from (lim1, lim2). If the K values on the same diagonal crosses
|
|
|
|
|
* returns the furthest point of reach. We might end up having to expensive
|
|
|
|
|
* cases using this algorithm is full, so a little bit of heuristic is needed
|
|
|
|
|
* to cut the search and to return a suboptimal point.
|
|
|
|
|
*/
|
|
|
|
|
static long xdl_split(unsigned long const *ha1, long off1, long lim1,
|
|
|
|
|
unsigned long const *ha2, long off2, long lim2,
|
|
|
|
|
long *kvdf, long *kvdb, int need_min, xdpsplit_t *spl,
|
|
|
|
|
xdalgoenv_t *xenv) {
|
|
|
|
|
long dmin = off1 - lim2, dmax = lim1 - off2;
|
|
|
|
|
long fmid = off1 - off2, bmid = lim1 - lim2;
|
|
|
|
|
long odd = (fmid - bmid) & 1;
|
|
|
|
|
long fmin = fmid, fmax = fmid;
|
|
|
|
|
long bmin = bmid, bmax = bmid;
|
|
|
|
|
long ec, d, i1, i2, prev1, best, dd, v, k;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Set initial diagonal values for both forward and backward path.
|
|
|
|
|
*/
|
|
|
|
|
kvdf[fmid] = off1;
|
|
|
|
|
kvdb[bmid] = lim1;
|
|
|
|
|
|
|
|
|
|
for (ec = 1;; ec++) {
|
|
|
|
|
int got_snake = 0;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* We need to extent the diagonal "domain" by one. If the next
|
|
|
|
|
* values exits the box boundaries we need to change it in the
|
|
|
|
|
* opposite direction because (max - min) must be a power of two.
|
2006-07-10 07:50:18 +02:00
|
|
|
* Also we initialize the external K value to -1 so that we can
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
* avoid extra conditions check inside the core loop.
|
|
|
|
|
*/
|
|
|
|
|
if (fmin > dmin)
|
|
|
|
|
kvdf[--fmin - 1] = -1;
|
|
|
|
|
else
|
|
|
|
|
++fmin;
|
|
|
|
|
if (fmax < dmax)
|
|
|
|
|
kvdf[++fmax + 1] = -1;
|
|
|
|
|
else
|
|
|
|
|
--fmax;
|
|
|
|
|
|
|
|
|
|
for (d = fmax; d >= fmin; d -= 2) {
|
|
|
|
|
if (kvdf[d - 1] >= kvdf[d + 1])
|
|
|
|
|
i1 = kvdf[d - 1] + 1;
|
|
|
|
|
else
|
|
|
|
|
i1 = kvdf[d + 1];
|
|
|
|
|
prev1 = i1;
|
|
|
|
|
i2 = i1 - d;
|
|
|
|
|
for (; i1 < lim1 && i2 < lim2 && ha1[i1] == ha2[i2]; i1++, i2++);
|
|
|
|
|
if (i1 - prev1 > xenv->snake_cnt)
|
|
|
|
|
got_snake = 1;
|
|
|
|
|
kvdf[d] = i1;
|
|
|
|
|
if (odd && bmin <= d && d <= bmax && kvdb[d] <= i1) {
|
|
|
|
|
spl->i1 = i1;
|
|
|
|
|
spl->i2 = i2;
|
|
|
|
|
spl->min_lo = spl->min_hi = 1;
|
|
|
|
|
return ec;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* We need to extent the diagonal "domain" by one. If the next
|
|
|
|
|
* values exits the box boundaries we need to change it in the
|
|
|
|
|
* opposite direction because (max - min) must be a power of two.
|
2006-07-10 07:50:18 +02:00
|
|
|
* Also we initialize the external K value to -1 so that we can
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
* avoid extra conditions check inside the core loop.
|
|
|
|
|
*/
|
|
|
|
|
if (bmin > dmin)
|
|
|
|
|
kvdb[--bmin - 1] = XDL_LINE_MAX;
|
|
|
|
|
else
|
|
|
|
|
++bmin;
|
|
|
|
|
if (bmax < dmax)
|
|
|
|
|
kvdb[++bmax + 1] = XDL_LINE_MAX;
|
|
|
|
|
else
|
|
|
|
|
--bmax;
|
|
|
|
|
|
|
|
|
|
for (d = bmax; d >= bmin; d -= 2) {
|
|
|
|
|
if (kvdb[d - 1] < kvdb[d + 1])
|
|
|
|
|
i1 = kvdb[d - 1];
|
|
|
|
|
else
|
|
|
|
|
i1 = kvdb[d + 1] - 1;
|
|
|
|
|
prev1 = i1;
|
|
|
|
|
i2 = i1 - d;
|
|
|
|
|
for (; i1 > off1 && i2 > off2 && ha1[i1 - 1] == ha2[i2 - 1]; i1--, i2--);
|
|
|
|
|
if (prev1 - i1 > xenv->snake_cnt)
|
|
|
|
|
got_snake = 1;
|
|
|
|
|
kvdb[d] = i1;
|
|
|
|
|
if (!odd && fmin <= d && d <= fmax && i1 <= kvdf[d]) {
|
|
|
|
|
spl->i1 = i1;
|
|
|
|
|
spl->i2 = i2;
|
|
|
|
|
spl->min_lo = spl->min_hi = 1;
|
|
|
|
|
return ec;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (need_min)
|
|
|
|
|
continue;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If the edit cost is above the heuristic trigger and if
|
|
|
|
|
* we got a good snake, we sample current diagonals to see
|
|
|
|
|
* if some of the, have reached an "interesting" path. Our
|
|
|
|
|
* measure is a function of the distance from the diagonal
|
|
|
|
|
* corner (i1 + i2) penalized with the distance from the
|
|
|
|
|
* mid diagonal itself. If this value is above the current
|
|
|
|
|
* edit cost times a magic factor (XDL_K_HEUR) we consider
|
|
|
|
|
* it interesting.
|
|
|
|
|
*/
|
|
|
|
|
if (got_snake && ec > xenv->heur_min) {
|
|
|
|
|
for (best = 0, d = fmax; d >= fmin; d -= 2) {
|
|
|
|
|
dd = d > fmid ? d - fmid: fmid - d;
|
|
|
|
|
i1 = kvdf[d];
|
|
|
|
|
i2 = i1 - d;
|
|
|
|
|
v = (i1 - off1) + (i2 - off2) - dd;
|
|
|
|
|
|
|
|
|
|
if (v > XDL_K_HEUR * ec && v > best &&
|
|
|
|
|
off1 + xenv->snake_cnt <= i1 && i1 < lim1 &&
|
|
|
|
|
off2 + xenv->snake_cnt <= i2 && i2 < lim2) {
|
|
|
|
|
for (k = 1; ha1[i1 - k] == ha2[i2 - k]; k++)
|
|
|
|
|
if (k == xenv->snake_cnt) {
|
|
|
|
|
best = v;
|
|
|
|
|
spl->i1 = i1;
|
|
|
|
|
spl->i2 = i2;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (best > 0) {
|
|
|
|
|
spl->min_lo = 1;
|
|
|
|
|
spl->min_hi = 0;
|
|
|
|
|
return ec;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (best = 0, d = bmax; d >= bmin; d -= 2) {
|
|
|
|
|
dd = d > bmid ? d - bmid: bmid - d;
|
|
|
|
|
i1 = kvdb[d];
|
|
|
|
|
i2 = i1 - d;
|
|
|
|
|
v = (lim1 - i1) + (lim2 - i2) - dd;
|
|
|
|
|
|
|
|
|
|
if (v > XDL_K_HEUR * ec && v > best &&
|
|
|
|
|
off1 < i1 && i1 <= lim1 - xenv->snake_cnt &&
|
|
|
|
|
off2 < i2 && i2 <= lim2 - xenv->snake_cnt) {
|
|
|
|
|
for (k = 0; ha1[i1 + k] == ha2[i2 + k]; k++)
|
|
|
|
|
if (k == xenv->snake_cnt - 1) {
|
|
|
|
|
best = v;
|
|
|
|
|
spl->i1 = i1;
|
|
|
|
|
spl->i2 = i2;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (best > 0) {
|
|
|
|
|
spl->min_lo = 0;
|
|
|
|
|
spl->min_hi = 1;
|
|
|
|
|
return ec;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Enough is enough. We spent too much time here and now we collect
|
|
|
|
|
* the furthest reaching path using the (i1 + i2) measure.
|
|
|
|
|
*/
|
|
|
|
|
if (ec >= xenv->mxcost) {
|
|
|
|
|
long fbest, fbest1, bbest, bbest1;
|
|
|
|
|
|
2006-04-08 17:27:20 +02:00
|
|
|
fbest = fbest1 = -1;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
for (d = fmax; d >= fmin; d -= 2) {
|
|
|
|
|
i1 = XDL_MIN(kvdf[d], lim1);
|
|
|
|
|
i2 = i1 - d;
|
|
|
|
|
if (lim2 < i2)
|
|
|
|
|
i1 = lim2 + d, i2 = lim2;
|
|
|
|
|
if (fbest < i1 + i2) {
|
|
|
|
|
fbest = i1 + i2;
|
|
|
|
|
fbest1 = i1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
2006-04-08 17:27:20 +02:00
|
|
|
bbest = bbest1 = XDL_LINE_MAX;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
for (d = bmax; d >= bmin; d -= 2) {
|
|
|
|
|
i1 = XDL_MAX(off1, kvdb[d]);
|
|
|
|
|
i2 = i1 - d;
|
|
|
|
|
if (i2 < off2)
|
|
|
|
|
i1 = off2 + d, i2 = off2;
|
|
|
|
|
if (i1 + i2 < bbest) {
|
|
|
|
|
bbest = i1 + i2;
|
|
|
|
|
bbest1 = i1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ((lim1 + lim2) - bbest < fbest - (off1 + off2)) {
|
|
|
|
|
spl->i1 = fbest1;
|
|
|
|
|
spl->i2 = fbest - fbest1;
|
|
|
|
|
spl->min_lo = 1;
|
|
|
|
|
spl->min_hi = 0;
|
|
|
|
|
} else {
|
|
|
|
|
spl->i1 = bbest1;
|
|
|
|
|
spl->i2 = bbest - bbest1;
|
|
|
|
|
spl->min_lo = 0;
|
|
|
|
|
spl->min_hi = 1;
|
|
|
|
|
}
|
|
|
|
|
return ec;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Rule: "Divide et Impera". Recursively split the box in sub-boxes by calling
|
|
|
|
|
* the box splitting function. Note that the real job (marking changed lines)
|
|
|
|
|
* is done in the two boundary reaching checks.
|
|
|
|
|
*/
|
|
|
|
|
int xdl_recs_cmp(diffdata_t *dd1, long off1, long lim1,
|
|
|
|
|
diffdata_t *dd2, long off2, long lim2,
|
|
|
|
|
long *kvdf, long *kvdb, int need_min, xdalgoenv_t *xenv) {
|
|
|
|
|
unsigned long const *ha1 = dd1->ha, *ha2 = dd2->ha;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Shrink the box by walking through each diagonal snake (SW and NE).
|
|
|
|
|
*/
|
|
|
|
|
for (; off1 < lim1 && off2 < lim2 && ha1[off1] == ha2[off2]; off1++, off2++);
|
|
|
|
|
for (; off1 < lim1 && off2 < lim2 && ha1[lim1 - 1] == ha2[lim2 - 1]; lim1--, lim2--);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If one dimension is empty, then all records on the other one must
|
|
|
|
|
* be obviously changed.
|
|
|
|
|
*/
|
|
|
|
|
if (off1 == lim1) {
|
|
|
|
|
char *rchg2 = dd2->rchg;
|
|
|
|
|
long *rindex2 = dd2->rindex;
|
|
|
|
|
|
|
|
|
|
for (; off2 < lim2; off2++)
|
|
|
|
|
rchg2[rindex2[off2]] = 1;
|
|
|
|
|
} else if (off2 == lim2) {
|
|
|
|
|
char *rchg1 = dd1->rchg;
|
|
|
|
|
long *rindex1 = dd1->rindex;
|
|
|
|
|
|
|
|
|
|
for (; off1 < lim1; off1++)
|
|
|
|
|
rchg1[rindex1[off1]] = 1;
|
|
|
|
|
} else {
|
|
|
|
|
xdpsplit_t spl;
|
2006-04-08 17:27:20 +02:00
|
|
|
spl.i1 = spl.i2 = 0;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Divide ...
|
|
|
|
|
*/
|
2009-03-15 22:01:20 +01:00
|
|
|
if (xdl_split(ha1, off1, lim1, ha2, off2, lim2, kvdf, kvdb,
|
|
|
|
|
need_min, &spl, xenv) < 0) {
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* ... et Impera.
|
|
|
|
|
*/
|
|
|
|
|
if (xdl_recs_cmp(dd1, off1, spl.i1, dd2, off2, spl.i2,
|
|
|
|
|
kvdf, kvdb, spl.min_lo, xenv) < 0 ||
|
|
|
|
|
xdl_recs_cmp(dd1, spl.i1, lim1, dd2, spl.i2, lim2,
|
|
|
|
|
kvdf, kvdb, spl.min_hi, xenv) < 0) {
|
|
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
int xdl_do_diff(mmfile_t *mf1, mmfile_t *mf2, xpparam_t const *xpp,
|
|
|
|
|
xdfenv_t *xe) {
|
|
|
|
|
long ndiags;
|
|
|
|
|
long *kvd, *kvdf, *kvdb;
|
|
|
|
|
xdalgoenv_t xenv;
|
|
|
|
|
diffdata_t dd1, dd2;
|
|
|
|
|
|
2009-01-07 18:04:09 +01:00
|
|
|
if (xpp->flags & XDF_PATIENCE_DIFF)
|
|
|
|
|
return xdl_do_patience_diff(mf1, mf2, xpp, xe);
|
|
|
|
|
|
2011-07-12 08:10:25 +02:00
|
|
|
if (xpp->flags & XDF_HISTOGRAM_DIFF)
|
|
|
|
|
return xdl_do_histogram_diff(mf1, mf2, xpp, xe);
|
|
|
|
|
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
if (xdl_prepare_env(mf1, mf2, xpp, xe) < 0) {
|
|
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Allocate and setup K vectors to be used by the differential algorithm.
|
|
|
|
|
* One is to store the forward path and one to store the backward path.
|
|
|
|
|
*/
|
|
|
|
|
ndiags = xe->xdf1.nreff + xe->xdf2.nreff + 3;
|
|
|
|
|
if (!(kvd = (long *) xdl_malloc((2 * ndiags + 2) * sizeof(long)))) {
|
|
|
|
|
|
|
|
|
|
xdl_free_env(xe);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
kvdf = kvd;
|
|
|
|
|
kvdb = kvdf + ndiags;
|
|
|
|
|
kvdf += xe->xdf2.nreff + 1;
|
|
|
|
|
kvdb += xe->xdf2.nreff + 1;
|
|
|
|
|
|
2006-04-04 03:47:55 +02:00
|
|
|
xenv.mxcost = xdl_bogosqrt(ndiags);
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
if (xenv.mxcost < XDL_MAX_COST_MIN)
|
|
|
|
|
xenv.mxcost = XDL_MAX_COST_MIN;
|
|
|
|
|
xenv.snake_cnt = XDL_SNAKE_CNT;
|
|
|
|
|
xenv.heur_min = XDL_HEUR_MIN_COST;
|
|
|
|
|
|
|
|
|
|
dd1.nrec = xe->xdf1.nreff;
|
|
|
|
|
dd1.ha = xe->xdf1.ha;
|
|
|
|
|
dd1.rchg = xe->xdf1.rchg;
|
|
|
|
|
dd1.rindex = xe->xdf1.rindex;
|
|
|
|
|
dd2.nrec = xe->xdf2.nreff;
|
|
|
|
|
dd2.ha = xe->xdf2.ha;
|
|
|
|
|
dd2.rchg = xe->xdf2.rchg;
|
|
|
|
|
dd2.rindex = xe->xdf2.rindex;
|
|
|
|
|
|
|
|
|
|
if (xdl_recs_cmp(&dd1, 0, dd1.nrec, &dd2, 0, dd2.nrec,
|
|
|
|
|
kvdf, kvdb, (xpp->flags & XDF_NEED_MINIMAL) != 0, &xenv) < 0) {
|
|
|
|
|
|
|
|
|
|
xdl_free(kvd);
|
|
|
|
|
xdl_free_env(xe);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
xdl_free(kvd);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
static xdchange_t *xdl_add_change(xdchange_t *xscr, long i1, long i2, long chg1, long chg2) {
|
|
|
|
|
xdchange_t *xch;
|
|
|
|
|
|
|
|
|
|
if (!(xch = (xdchange_t *) xdl_malloc(sizeof(xdchange_t))))
|
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
|
|
xch->next = xscr;
|
|
|
|
|
xch->i1 = i1;
|
|
|
|
|
xch->i2 = i2;
|
|
|
|
|
xch->chg1 = chg1;
|
|
|
|
|
xch->chg2 = chg2;
|
|
|
|
|
|
|
|
|
|
return xch;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
xdiff: add xdl_merge()
This new function implements the functionality of RCS merge, but
in-memory. It returns < 0 on error, otherwise the number of conflicts.
Finding the conflicting lines can be a very expensive task. You can
control the eagerness of this algorithm:
- a level value of 0 means that all overlapping changes are treated
as conflicts,
- a value of 1 means that if the overlapping changes are identical,
it is not treated as a conflict.
- If you set level to 2, overlapping changes will be analyzed, so that
almost identical changes will not result in huge conflicts. Rather,
only the conflicting lines will be shown inside conflict markers.
With each increasing level, the algorithm gets slower, but more accurate.
Note that the code for level 2 depends on the simple definition of
mmfile_t specific to git, and therefore it will be harder to port that
to LibXDiff.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-11-21 23:24:34 +01:00
|
|
|
int xdl_change_compact(xdfile_t *xdf, xdfile_t *xdfo, long flags) {
|
2006-04-14 01:45:13 +02:00
|
|
|
long ix, ixo, ixs, ixref, grpsiz, nrec = xdf->nrec;
|
|
|
|
|
char *rchg = xdf->rchg, *rchgo = xdfo->rchg;
|
|
|
|
|
xrecord_t **recs = xdf->recs;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This is the same of what GNU diff does. Move back and forward
|
|
|
|
|
* change groups for a consistent and pretty diff output. This also
|
2006-07-10 07:50:18 +02:00
|
|
|
* helps in finding joinable change groups and reduce the diff size.
|
2006-04-14 01:45:13 +02:00
|
|
|
*/
|
|
|
|
|
for (ix = ixo = 0;;) {
|
|
|
|
|
/*
|
|
|
|
|
* Find the first changed line in the to-be-compacted file.
|
|
|
|
|
* We need to keep track of both indexes, so if we find a
|
|
|
|
|
* changed lines group on the other file, while scanning the
|
|
|
|
|
* to-be-compacted file, we need to skip it properly. Note
|
|
|
|
|
* that loops that are testing for changed lines on rchg* do
|
|
|
|
|
* not need index bounding since the array is prepared with
|
|
|
|
|
* a zero at position -1 and N.
|
|
|
|
|
*/
|
|
|
|
|
for (; ix < nrec && !rchg[ix]; ix++)
|
|
|
|
|
while (rchgo[ixo++]);
|
|
|
|
|
if (ix == nrec)
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Record the start of a changed-group in the to-be-compacted file
|
|
|
|
|
* and find the end of it, on both to-be-compacted and other file
|
|
|
|
|
* indexes (ix and ixo).
|
|
|
|
|
*/
|
|
|
|
|
ixs = ix;
|
|
|
|
|
for (ix++; rchg[ix]; ix++);
|
|
|
|
|
for (; rchgo[ixo]; ixo++);
|
|
|
|
|
|
|
|
|
|
do {
|
|
|
|
|
grpsiz = ix - ixs;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If the line before the current change group, is equal to
|
|
|
|
|
* the last line of the current change group, shift backward
|
|
|
|
|
* the group.
|
|
|
|
|
*/
|
|
|
|
|
while (ixs > 0 && recs[ixs - 1]->ha == recs[ix - 1]->ha &&
|
2006-06-14 17:40:23 +02:00
|
|
|
xdl_recmatch(recs[ixs - 1]->ptr, recs[ixs - 1]->size, recs[ix - 1]->ptr, recs[ix - 1]->size, flags)) {
|
2006-04-14 01:45:13 +02:00
|
|
|
rchg[--ixs] = 1;
|
|
|
|
|
rchg[--ix] = 0;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This change might have joined two change groups,
|
|
|
|
|
* so we try to take this scenario in account by moving
|
|
|
|
|
* the start index accordingly (and so the other-file
|
|
|
|
|
* end-of-group index).
|
|
|
|
|
*/
|
|
|
|
|
for (; rchg[ixs - 1]; ixs--);
|
|
|
|
|
while (rchgo[--ixo]);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Record the end-of-group position in case we are matched
|
|
|
|
|
* with a group of changes in the other file (that is, the
|
2009-04-17 20:13:30 +02:00
|
|
|
* change record before the end-of-group index in the other
|
2006-04-14 01:45:13 +02:00
|
|
|
* file is set).
|
|
|
|
|
*/
|
|
|
|
|
ixref = rchgo[ixo - 1] ? ix: nrec;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* If the first line of the current change group, is equal to
|
|
|
|
|
* the line next of the current change group, shift forward
|
|
|
|
|
* the group.
|
|
|
|
|
*/
|
|
|
|
|
while (ix < nrec && recs[ixs]->ha == recs[ix]->ha &&
|
2006-06-14 17:40:23 +02:00
|
|
|
xdl_recmatch(recs[ixs]->ptr, recs[ixs]->size, recs[ix]->ptr, recs[ix]->size, flags)) {
|
2006-04-14 01:45:13 +02:00
|
|
|
rchg[ixs++] = 0;
|
|
|
|
|
rchg[ix++] = 1;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This change might have joined two change groups,
|
|
|
|
|
* so we try to take this scenario in account by moving
|
|
|
|
|
* the start index accordingly (and so the other-file
|
|
|
|
|
* end-of-group index). Keep tracking the reference
|
|
|
|
|
* index in case we are shifting together with a
|
|
|
|
|
* corresponding group of changes in the other file.
|
|
|
|
|
*/
|
|
|
|
|
for (; rchg[ix]; ix++);
|
|
|
|
|
while (rchgo[++ixo])
|
|
|
|
|
ixref = ix;
|
|
|
|
|
}
|
|
|
|
|
} while (grpsiz != ix - ixs);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Try to move back the possibly merged group of changes, to match
|
|
|
|
|
* the recorded postion in the other file.
|
|
|
|
|
*/
|
|
|
|
|
while (ixref < ix) {
|
|
|
|
|
rchg[--ixs] = 1;
|
|
|
|
|
rchg[--ix] = 0;
|
|
|
|
|
while (rchgo[--ixo]);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
int xdl_build_script(xdfenv_t *xe, xdchange_t **xscr) {
|
|
|
|
|
xdchange_t *cscr = NULL, *xch;
|
|
|
|
|
char *rchg1 = xe->xdf1.rchg, *rchg2 = xe->xdf2.rchg;
|
|
|
|
|
long i1, i2, l1, l2;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Trivial. Collects "groups" of changes and creates an edit script.
|
|
|
|
|
*/
|
|
|
|
|
for (i1 = xe->xdf1.nrec, i2 = xe->xdf2.nrec; i1 >= 0 || i2 >= 0; i1--, i2--)
|
|
|
|
|
if (rchg1[i1 - 1] || rchg2[i2 - 1]) {
|
|
|
|
|
for (l1 = i1; rchg1[i1 - 1]; i1--);
|
|
|
|
|
for (l2 = i2; rchg2[i2 - 1]; i2--);
|
|
|
|
|
|
|
|
|
|
if (!(xch = xdl_add_change(cscr, i1, i2, l1 - i1, l2 - i2))) {
|
|
|
|
|
xdl_free_script(cscr);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
cscr = xch;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
*xscr = cscr;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
void xdl_free_script(xdchange_t *xscr) {
|
|
|
|
|
xdchange_t *xch;
|
|
|
|
|
|
|
|
|
|
while ((xch = xscr) != NULL) {
|
|
|
|
|
xscr = xscr->next;
|
|
|
|
|
xdl_free(xch);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
int xdl_diff(mmfile_t *mf1, mmfile_t *mf2, xpparam_t const *xpp,
|
|
|
|
|
xdemitconf_t const *xecfg, xdemitcb_t *ecb) {
|
|
|
|
|
xdchange_t *xscr;
|
|
|
|
|
xdfenv_t xe;
|
2008-10-25 15:30:54 +02:00
|
|
|
emit_func_t ef = xecfg->emit_func ?
|
|
|
|
|
(emit_func_t)xecfg->emit_func : xdl_emit_diff;
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
|
if (xdl_do_diff(mf1, mf2, xpp, &xe) < 0) {
|
|
|
|
|
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
2006-06-14 17:40:23 +02:00
|
|
|
if (xdl_change_compact(&xe.xdf1, &xe.xdf2, xpp->flags) < 0 ||
|
|
|
|
|
xdl_change_compact(&xe.xdf2, &xe.xdf1, xpp->flags) < 0 ||
|
2006-04-14 01:45:13 +02:00
|
|
|
xdl_build_script(&xe, &xscr) < 0) {
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
|
xdl_free_env(&xe);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
if (xscr) {
|
2008-10-25 15:30:54 +02:00
|
|
|
if (ef(&xe, xscr, ecb, xecfg) < 0) {
|
Use a *real* built-in diff generator
This uses a simplified libxdiff setup to generate unified diffs _without_
doing fork/execve of GNU "diff".
This has several huge advantages, for example:
Before:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m24.818s
user 0m13.332s
sys 0m8.664s
After:
[torvalds@g5 linux]$ time git diff v2.6.16.. > /dev/null
real 0m4.563s
user 0m2.944s
sys 0m1.580s
and the fact that this should be a lot more portable (ie we can ignore all
the issues with doing fork/execve under Windows).
Perhaps even more importantly, this allows us to do diffs without actually
ever writing out the git file contents to a temporary file (and without
any of the shell quoting issues on filenames etc etc).
NOTE! THIS PATCH DOES NOT DO THAT OPTIMIZATION YET! I was lazy, and the
current "diff-core" code actually will always write the temp-files,
because it used to be something that you simply had to do. So this current
one actually writes a temp-file like before, and then reads it into memory
again just to do the diff. Stupid.
But if this basic infrastructure is accepted, we can start switching over
diff-core to not write temp-files, which should speed things up even
further, especially when doing big tree-to-tree diffs.
Now, in the interest of full disclosure, I should also point out a few
downsides:
- the libxdiff algorithm is different, and I bet GNU diff has gotten a
lot more testing. And the thing is, generating a diff is not an exact
science - you can get two different diffs (and you will), and they can
both be perfectly valid. So it's not possible to "validate" the
libxdiff output by just comparing it against GNU diff.
- GNU diff does some nice eye-candy, like trying to figure out what the
last function was, and adding that information to the "@@ .." line.
libxdiff doesn't do that.
- The libxdiff thing has some known deficiencies. In particular, it gets
the "\No newline at end of file" case wrong. So this is currently for
the experimental branch only. I hope Davide will help fix it.
That said, I think the huge performance advantage, and the fact that it
integrates better is definitely worth it. But it should go into a
development branch at least due to the missing newline issue.
Technical note: this is based on libxdiff-0.17, but I did some surgery to
get rid of the extraneous fat - stuff that git doesn't need, and seriously
cutting down on mmfile_t, which had much more capabilities than the diff
algorithm either needed or used. In this version, "mmfile_t" is just a
trivial <pointer,length> tuple.
That said, I tried to keep the differences to simple removals, so that you
can do a diff between this and the libxdiff origin, and you'll basically
see just things getting deleted. Even the mmfile_t simplifications are
left in a state where the diffs should be readable.
Apologies to Davide, whom I'd love to get feedback on this all from (I
wrote my own "fill_mmfile()" for the new simpler mmfile_t format: the old
complex format had a helper function for that, but I did my surgery with
the goal in mind that eventually we _should_ just do
mmfile_t mf;
buf = read_sha1_file(sha1, type, &size);
mf->ptr = buf;
mf->size = size;
.. use "mf" directly ..
which was really a nightmare with the old "helpful" mmfile_t, and really
is that easy with the new cut-down interfaces).
[ Btw, as any hawk-eye can see from the diff, this was actually generated
with itself, so it is "self-hosting". That's about all the testing it
has gotten, along with the above kernel diff, which eye-balls correctly,
but shows the newline issue when you double-check it with "git-apply" ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-25 05:13:22 +01:00
|
|
|
|
|
|
|
|
xdl_free_script(xscr);
|
|
|
|
|
xdl_free_env(&xe);
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
xdl_free_script(xscr);
|
|
|
|
|
}
|
|
|
|
|
xdl_free_env(&xe);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|