mirrors/git
1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-11-05 08:47:56 +01:00
Code Activity
git/Makefile

177 lines
5.4 KiB
Makefile
Raw Normal View History

git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
all::
git-gui: Make 'make' quieter by default To fit nicely into the output of the git.git project's own quieter Makefile, we want to make the git-gui Makefile nice and quiet too. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-06 08:13:23 +01:00
# Define V=1 to have a more verbose compile.
#
git-gui: Ensure version number is always current. I'm stealing the exact logic used by core Git within its own Makefile to setup the version number within scripts and executables. This way we can be sure that the version number is always updated after a commit, and that the version number also reflects when it is coming from a dirty working directory (and is thus pretty worthless). I've cleaned up some of the version display code in the about dialog too. There were simply too many blank lines in the bottom section where we showed the version data. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:31:09 +01:00
GIT-VERSION-FILE: .FORCE-GIT-VERSION-FILE
@$(SHELL_PATH) ./GIT-VERSION-GEN
-include GIT-VERSION-FILE
git-gui: Correctly install to /usr/bin on Cygwin Mark Levedahl <mlevedahl@gmail.com> noted that installation on Cygwin to /usr/bin can cause problems with the automatic guessing of our library location. The problem is that installation to /usr/bin means we actually have: /usr/bin = c:\cygwin\bin /usr/share = c:\cygwin\usr\share So git-gui guesses that its library should be found within the c:\cygwin\share directory, as that is where it should be relative to the script itself in c:\cygwin\bin. In my first version of this patch I tried to use `cygpath` to resolve /usr/bin and /usr/share to test that they were in the same relative locations, but that didn't work out correctly as we were actually testing /usr/share against itself, so it always was equal, and we always used relative paths. So my original solution was quite wrong. Mark suggested we just always disable relative behavior on Cygwin, because of the complexity of the mount mapping problem, so that's all I'm doing. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-19 16:48:09 +02:00
uname_O := $(shell sh -c 'uname -o 2>/dev/null || echo not')
git-gui: Revert "git-gui: Display all authors of git-gui." This reverts commit 871f4c97ad7e021d1a0a98c80c5da77fcf70e4af. Too many users have complained about the credits generator in git-gui, so I'm backing the entire thing out. This revert will finish that series. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-12 18:26:04 +01:00
SCRIPT_SH = git-gui.sh
git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
GITGUI_BUILT_INS = git-citool
git-gui: Revert "git-gui: Display all authors of git-gui." This reverts commit 871f4c97ad7e021d1a0a98c80c5da77fcf70e4af. Too many users have complained about the credits generator in git-gui, so I'm backing the entire thing out. This revert will finish that series. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-12 18:26:04 +01:00
ALL_PROGRAMS = $(GITGUI_BUILT_INS) $(patsubst %.sh,%,$(SCRIPT_SH))
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
ALL_LIBFILES = $(wildcard lib/*.tcl)
git-gui: Gracefully handle bad TCL_PATH at compile time Petr Baudis pointed out the main git.git repository's Makefile dies now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not set to a working tclsh program path. This breaks people who may have a working build configuration today and suddenly upgrade to the latest git release. The tclIndex is required for git-gui to load its associated lib files, but using the Tcl auto_load procedure to source only the files we need is a performance optimization. We can emulate the auto_load by just source'ing every file in that directory, assuming we source class.tcl first to initialize our crude class system. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-18 00:01:50 +02:00
PRELOAD_FILES = lib/class.tcl
git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
ifndef SHELL_PATH
SHELL_PATH = /bin/sh
endif
git-gui: Created makefile to install the program. Since we want to be installed in gitexecdir so that "git gui" works we can guess where that directory is by asking the git wrapper executable and locating ourselves at the same location using the same install rules as core git. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2006-11-16 02:04:17 +01:00
git-gui: Allow gitexecdir, INSTALL to be set by the caller. When used as a subproject within git.git our Makefile must honor the gitexecdir which git.git's Makefile is passing down to us, ensuring that we install our executables into the libexec chosen by the end-user or packager. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-12 21:37:50 +01:00
ifndef gitexecdir
gitexecdir := $(shell git --exec-path)
endif
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
ifndef sharedir
git-gui: Guess our share/git-gui/lib path at runtime if possible Johannes Sixt asked me to try to avoid embedding the runtime location of git-gui's library directory in the executable script. Not embedding it helps the MinGW to be relocatable to another directory should a user wish to install the programs in a directory other than the location the packager wanted them to be installed into. Most of this is a hack. We try to determine if the path of our master git-gui script will be able to locate the lib by ../share/git-gui/lib. This should be true if $(gitexecdir) and $(libdir) have the same prefix. If they do then we defer the assignment of $(libdir) until runtime, and we get it from $argv0 rather than embedding it into the script itself. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-27 06:03:37 +02:00
sharedir := $(dir $(gitexecdir))share
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
endif
git-gui: Allow gitexecdir, INSTALL to be set by the caller. When used as a subproject within git.git our Makefile must honor the gitexecdir which git.git's Makefile is passing down to us, ensuring that we install our executables into the libexec chosen by the end-user or packager. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-12 21:37:50 +01:00
ifndef INSTALL
INSTALL = install
endif
git-gui: Created makefile to install the program. Since we want to be installed in gitexecdir so that "git gui" works we can guess where that directory is by asking the git wrapper executable and locating ourselves at the same location using the same install rules as core git. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2006-11-16 02:04:17 +01:00
git-gui: Quiet our installation process Alex Riesen wanted a quieter installation process for git and its contained git-gui. His earlier patch to do this failed to work properly when V=1, and didn't really give a great indication of what the installation was doing. These rules are a little bit on the messy side, as each of our install actions is composed of at least two variables, but in the V=1 case the text is identical to what we had before, while in the non-V=1 case we use some more complex rules to show the interesting details, and hide the less interesting bits. We now can also set QUIET= (nothing) to see the rules that are used when V= (nothing), so we can debug those too if we have to. This is actually a side-effect of how we insert the @ into the rules we use for the "lists of things", like our builtins or our library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-03 02:56:51 +02:00
INSTALL_D0 = $(INSTALL) -d -m755 # space is required here
INSTALL_D1 =
INSTALL_R0 = $(INSTALL) -m644 # space is required here
INSTALL_R1 =
INSTALL_X0 = $(INSTALL) -m755 # space is required here
INSTALL_X1 =
INSTALL_L0 = rm -f # space is required here
INSTALL_L1 = && ln # space is required here
INSTALL_L2 =
INSTALL_L3 =
git-gui: Make 'make' quieter by default To fit nicely into the output of the git.git project's own quieter Makefile, we want to make the git-gui Makefile nice and quiet too. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-06 08:13:23 +01:00
ifndef V
git-gui: Quiet our installation process Alex Riesen wanted a quieter installation process for git and its contained git-gui. His earlier patch to do this failed to work properly when V=1, and didn't really give a great indication of what the installation was doing. These rules are a little bit on the messy side, as each of our install actions is composed of at least two variables, but in the V=1 case the text is identical to what we had before, while in the non-V=1 case we use some more complex rules to show the interesting details, and hide the less interesting bits. We now can also set QUIET= (nothing) to see the rules that are used when V= (nothing), so we can debug those too if we have to. This is actually a side-effect of how we insert the @ into the rules we use for the "lists of things", like our builtins or our library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-03 02:56:51 +02:00
QUIET = @
QUIET_GEN = $(QUIET)echo ' ' GEN $@ &&
QUIET_BUILT_IN = $(QUIET)echo ' ' BUILTIN $@ &&
QUIET_INDEX = $(QUIET)echo ' ' INDEX $(dir $@) &&
git-gui: Gracefully handle bad TCL_PATH at compile time Petr Baudis pointed out the main git.git repository's Makefile dies now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not set to a working tclsh program path. This breaks people who may have a working build configuration today and suddenly upgrade to the latest git release. The tclIndex is required for git-gui to load its associated lib files, but using the Tcl auto_load procedure to source only the files we need is a performance optimization. We can emulate the auto_load by just source'ing every file in that directory, assuming we source class.tcl first to initialize our crude class system. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-18 00:01:50 +02:00
QUIET_2DEVNULL = 2>/dev/null
git-gui: Quiet our installation process Alex Riesen wanted a quieter installation process for git and its contained git-gui. His earlier patch to do this failed to work properly when V=1, and didn't really give a great indication of what the installation was doing. These rules are a little bit on the messy side, as each of our install actions is composed of at least two variables, but in the V=1 case the text is identical to what we had before, while in the non-V=1 case we use some more complex rules to show the interesting details, and hide the less interesting bits. We now can also set QUIET= (nothing) to see the rules that are used when V= (nothing), so we can debug those too if we have to. This is actually a side-effect of how we insert the @ into the rules we use for the "lists of things", like our builtins or our library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-03 02:56:51 +02:00
INSTALL_D0 = dir=
INSTALL_D1 = && echo ' ' DEST $$dir && $(INSTALL) -d -m755 "$$dir"
INSTALL_R0 = src=
INSTALL_R1 = && echo ' ' INSTALL 644 `basename $$src` && $(INSTALL) -m644 $$src
INSTALL_X0 = src=
INSTALL_X1 = && echo ' ' INSTALL 755 `basename $$src` && $(INSTALL) -m755 $$src
INSTALL_L0 = dst=
INSTALL_L1 = && src=
INSTALL_L2 = && dst=
INSTALL_L3 = && echo ' ' 'LINK ' `basename "$$dst"` '->' `basename "$$src"` && rm -f "$$dst" && ln "$$src" "$$dst"
git-gui: Make 'make' quieter by default To fit nicely into the output of the git.git project's own quieter Makefile, we want to make the git-gui Makefile nice and quiet too. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-06 08:13:23 +01:00
endif
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
TCL_PATH ?= tclsh
git-gui: Honor TCLTK_PATH if supplied Mimick what we do for gitk. Since you do have a source file, git-gui.sh, which is separate from the target, it should be much easier in git-gui's Makefile. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-04-17 12:31:47 +02:00
TCLTK_PATH ?= wish
git-gui: Support of "make -s" in: do not output anything of the build itself Signed-off-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-07 00:44:37 +01:00
ifeq ($(findstring $(MAKEFLAGS),s),s)
QUIET_GEN =
QUIET_BUILT_IN =
endif
git-gui: Created makefile to install the program. Since we want to be installed in gitexecdir so that "git gui" works we can guess where that directory is by asking the git wrapper executable and locating ourselves at the same location using the same install rules as core git. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2006-11-16 02:04:17 +01:00
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
gitexecdir_SQ = $(subst ','\'',$(gitexecdir))
git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
SHELL_PATH_SQ = $(subst ','\'',$(SHELL_PATH))
git-gui: Gracefully handle bad TCL_PATH at compile time Petr Baudis pointed out the main git.git repository's Makefile dies now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not set to a working tclsh program path. This breaks people who may have a working build configuration today and suddenly upgrade to the latest git release. The tclIndex is required for git-gui to load its associated lib files, but using the Tcl auto_load procedure to source only the files we need is a performance optimization. We can emulate the auto_load by just source'ing every file in that directory, assuming we source class.tcl first to initialize our crude class system. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-18 00:01:50 +02:00
TCL_PATH_SQ = $(subst ','\'',$(TCL_PATH))
git-gui: Honor TCLTK_PATH if supplied Mimick what we do for gitk. Since you do have a source file, git-gui.sh, which is separate from the target, it should be much easier in git-gui's Makefile. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-04-17 12:31:47 +02:00
TCLTK_PATH_SQ = $(subst ','\'',$(TCLTK_PATH))
git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
libdir ?= $(sharedir)/git-gui/lib
libdir_SQ = $(subst ','\'',$(libdir))
git-gui: Guess our share/git-gui/lib path at runtime if possible Johannes Sixt asked me to try to avoid embedding the runtime location of git-gui's library directory in the executable script. Not embedding it helps the MinGW to be relocatable to another directory should a user wish to install the programs in a directory other than the location the packager wanted them to be installed into. Most of this is a hack. We try to determine if the path of our master git-gui script will be able to locate the lib by ../share/git-gui/lib. This should be true if $(gitexecdir) and $(libdir) have the same prefix. If they do then we defer the assignment of $(libdir) until runtime, and we get it from $argv0 rather than embedding it into the script itself. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-27 06:03:37 +02:00
exedir = $(dir $(gitexecdir))share/git-gui/lib
exedir_SQ = $(subst ','\'',$(exedir))
git-gui: Revert "git-gui: Display all authors of git-gui." This reverts commit 871f4c97ad7e021d1a0a98c80c5da77fcf70e4af. Too many users have complained about the credits generator in git-gui, so I'm backing the entire thing out. This revert will finish that series. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-12 18:26:04 +01:00
$(patsubst %.sh,%,$(SCRIPT_SH)) : % : %.sh
git-gui: Make 'make' quieter by default To fit nicely into the output of the git.git project's own quieter Makefile, we want to make the git-gui Makefile nice and quiet too. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-06 08:13:23 +01:00
$(QUIET_GEN)rm -f $@ $@+ && \
git-gui: Correctly install to /usr/bin on Cygwin Mark Levedahl <mlevedahl@gmail.com> noted that installation on Cygwin to /usr/bin can cause problems with the automatic guessing of our library location. The problem is that installation to /usr/bin means we actually have: /usr/bin = c:\cygwin\bin /usr/share = c:\cygwin\usr\share So git-gui guesses that its library should be found within the c:\cygwin\share directory, as that is where it should be relative to the script itself in c:\cygwin\bin. In my first version of this patch I tried to use `cygpath` to resolve /usr/bin and /usr/share to test that they were in the same relative locations, but that didn't work out correctly as we were actually testing /usr/share against itself, so it always was equal, and we always used relative paths. So my original solution was quite wrong. Mark suggested we just always disable relative behavior on Cygwin, because of the complexity of the mount mapping problem, so that's all I'm doing. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-19 16:48:09 +02:00
GITGUI_RELATIVE= && \
git-gui: Guess our share/git-gui/lib path at runtime if possible Johannes Sixt asked me to try to avoid embedding the runtime location of git-gui's library directory in the executable script. Not embedding it helps the MinGW to be relocatable to another directory should a user wish to install the programs in a directory other than the location the packager wanted them to be installed into. Most of this is a hack. We try to determine if the path of our master git-gui script will be able to locate the lib by ../share/git-gui/lib. This should be true if $(gitexecdir) and $(libdir) have the same prefix. If they do then we defer the assignment of $(libdir) until runtime, and we get it from $argv0 rather than embedding it into the script itself. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-27 06:03:37 +02:00
if test '$(exedir_SQ)' = '$(libdir_SQ)'; then \
git-gui: Correctly install to /usr/bin on Cygwin Mark Levedahl <mlevedahl@gmail.com> noted that installation on Cygwin to /usr/bin can cause problems with the automatic guessing of our library location. The problem is that installation to /usr/bin means we actually have: /usr/bin = c:\cygwin\bin /usr/share = c:\cygwin\usr\share So git-gui guesses that its library should be found within the c:\cygwin\share directory, as that is where it should be relative to the script itself in c:\cygwin\bin. In my first version of this patch I tried to use `cygpath` to resolve /usr/bin and /usr/share to test that they were in the same relative locations, but that didn't work out correctly as we were actually testing /usr/share against itself, so it always was equal, and we always used relative paths. So my original solution was quite wrong. Mark suggested we just always disable relative behavior on Cygwin, because of the complexity of the mount mapping problem, so that's all I'm doing. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-19 16:48:09 +02:00
if test "$(uname_O)" = Cygwin; \
then GITGUI_RELATIVE= ; \
else GITGUI_RELATIVE=1; \
fi; \
git-gui: Guess our share/git-gui/lib path at runtime if possible Johannes Sixt asked me to try to avoid embedding the runtime location of git-gui's library directory in the executable script. Not embedding it helps the MinGW to be relocatable to another directory should a user wish to install the programs in a directory other than the location the packager wanted them to be installed into. Most of this is a hack. We try to determine if the path of our master git-gui script will be able to locate the lib by ../share/git-gui/lib. This should be true if $(gitexecdir) and $(libdir) have the same prefix. If they do then we defer the assignment of $(libdir) until runtime, and we get it from $argv0 rather than embedding it into the script itself. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-27 06:03:37 +02:00
fi && \
git-gui: Revert "git-gui: Display all authors of git-gui." This reverts commit 871f4c97ad7e021d1a0a98c80c5da77fcf70e4af. Too many users have complained about the credits generator in git-gui, so I'm backing the entire thing out. This revert will finish that series. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-12 18:26:04 +01:00
sed -e '1s|#!.*/sh|#!$(SHELL_PATH_SQ)|' \
git-gui: Don't require $DISPLAY just to get --version Junio asked that we don't force the user to have a valid X11 server configured in $DISPLAY just to obtain the output of `git gui version`. This makes sense, the user may be an automated tool that is running without an X server available to it, such as a build script or other sort of package management system. Or it might just be a user working in a non-GUI environment and wondering "what version of git-gui do I have installed?". Tcl has a lot of warts, but one of its better ones is that a comment can be continued to the next line by escaping the LF that would have ended the comment using a backslash-LF sequence. In the past we have used this trick to escape away the 'exec wish' that is actually a Bourne shell script and keep Tcl from executing it. I'm using that feature here to comment out the Bourne shell script and hide it from the Tcl engine. Except now our Bourne shell script is a few lines long and checks to see if it should print the version, or not. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-22 07:10:12 +02:00
-e 's|^ exec wish "$$0"| exec $(subst |,'\|',$(TCLTK_PATH_SQ)) "$$0"|' \
git-gui: Rename GIT_VERSION to GITGUI_VERSION. Now that the decision has been made to treat git-gui as a subproject, rather than merging it directly into git, we should use a different substitution for our version value to avoid any possible confusion. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-12 22:12:04 +01:00
-e 's/@@GITGUI_VERSION@@/$(GITGUI_VERSION)/g' \
git-gui: Guess our share/git-gui/lib path at runtime if possible Johannes Sixt asked me to try to avoid embedding the runtime location of git-gui's library directory in the executable script. Not embedding it helps the MinGW to be relocatable to another directory should a user wish to install the programs in a directory other than the location the packager wanted them to be installed into. Most of this is a hack. We try to determine if the path of our master git-gui script will be able to locate the lib by ../share/git-gui/lib. This should be true if $(gitexecdir) and $(libdir) have the same prefix. If they do then we defer the assignment of $(libdir) until runtime, and we get it from $argv0 rather than embedding it into the script itself. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-27 06:03:37 +02:00
-e 's|@@GITGUI_RELATIVE@@|'$$GITGUI_RELATIVE'|' \
-e $$GITGUI_RELATIVE's|@@GITGUI_LIBDIR@@|$(libdir_SQ)|' \
git-gui: Make 'make' quieter by default To fit nicely into the output of the git.git project's own quieter Makefile, we want to make the git-gui Makefile nice and quiet too. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-06 08:13:23 +01:00
$@.sh >$@+ && \
chmod +x $@+ && \
git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
mv $@+ $@
$(GITGUI_BUILT_INS): git-gui
git-gui: Make 'make' quieter by default To fit nicely into the output of the git.git project's own quieter Makefile, we want to make the git-gui Makefile nice and quiet too. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-06 08:13:23 +01:00
$(QUIET_BUILT_IN)rm -f $@ && ln git-gui $@
git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
Makefile rules for translation catalog generation and installation. [jes: with fixes by the i18n team.] Signed-off-by: Christian Stimming <stimming@tuhh.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2007-07-21 14:17:07 +02:00
XGETTEXT ?= xgettext
msgsdir ?= $(libdir)/msgs
msgsdir_SQ = $(subst ','\'',$(msgsdir))
PO_TEMPLATE = po/git-gui.pot
ALL_POFILES = $(wildcard po/*.po)
ALL_MSGFILES = $(subst .po,.msg,$(ALL_POFILES))
$(PO_TEMPLATE): $(SCRIPT_SH) $(ALL_LIBFILES)
$(XGETTEXT) -kmc -LTcl -o $@ $(SCRIPT_SH) $(ALL_LIBFILES)
update-po:: $(PO_TEMPLATE)
$(foreach p, $(ALL_POFILES), echo Updating $p ; msgmerge -U $p $(PO_TEMPLATE) ; )
$(ALL_MSGFILES): %.msg : %.po
@echo Generating catalog $@
msgfmt --statistics --tcl $< -l $(basename $(notdir $<)) -d $(dir $@)
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
lib/tclIndex: $(ALL_LIBFILES)
git-gui: Gracefully handle bad TCL_PATH at compile time Petr Baudis pointed out the main git.git repository's Makefile dies now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not set to a working tclsh program path. This breaks people who may have a working build configuration today and suddenly upgrade to the latest git release. The tclIndex is required for git-gui to load its associated lib files, but using the Tcl auto_load procedure to source only the files we need is a performance optimization. We can emulate the auto_load by just source'ing every file in that directory, assuming we source class.tcl first to initialize our crude class system. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-18 00:01:50 +02:00
$(QUIET_INDEX)if echo \
$(foreach p,$(PRELOAD_FILES),source $p\;) \
git-gui: Define a simple class/method system As most of the git-gui interface is based upon "meta-widgets" that need to carry around a good deal of state (e.g. console windows, browser windows, blame viewer) we have a good deal of messy code that tries to store this meta-widget state in global arrays, where keys into the array are formed from a union of a unique "object instance id" and the field name. This is a simple class system for Tcl that allows us to hide much of that mess by making Tcl do what it does best; process strings to manipulate its own code during startup. Each object instance is placed into its own namespace. The namespace is created when the object instance is created and the namespace is destroyed when the object instance is removed from the system. Within that namespace we place variables for each field within the class; these variables can themselves be scalar values or full-blown Tcl arrays. A simple class might be defined as: class map { field data field size 0 constructor {} { return $this } method set {name value} { set data($name) $value incr size } method size {} { return $size } ifdeleted { return 0 } } All fields must be declared before any constructors or methods. This allows our class to generate a list of the fields so it can properly alter the definition of the constructor and method bodies prior to passing them off to Tcl for definition with proc. A field may optionally be given a default/initial value. This can only be done for non-array type fields. Constructors are given full access to all fields of the class, so they can initialize the data values. The default values of fields (if any) are set before the constructor runs, and the implicit local variable $this is initialized to the instance identifier. Methods are given access to fields they actually use in their body. Every method has an implicit "this" argument inserted as its first parameter; callers of methods must be sure they supply this value. Some basic optimization tricks are performed (but not much). We try to only upvar (locally bind) fields that are accessed within a method, but we err on the side of caution and may upvar more than we need to. If a variable is accessed only once within a method and that access is by $foo (read) we avoid the upvar and instead use [set foo] to obtain the value. This is slightly faster as Tcl does not need to lookup the variable twice. We also offer some small syntatic sugar for interacting with Tk and the fileevent callback system in Tcl. If a field (say "foo") is used as "@foo" we insert instead the true global variable name of that variable into the body of the constructor or method. This allows easy binding to Tk textvariable options, e.g.: label $w.title -textvariable @title Proper namespace callbacks can also be setup with the special cb proc that is defined in each namespace. [cb _foo a] will invoke the method _foo in the current namespace, passing it $this as the first (implied) parameter and a as the second parameter. This makes it very simple to connect an object instance to a -command option for a Tk widget or to a fileevent readable or writable for a file channel. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-09 01:54:05 +02:00
auto_mkindex lib '*.tcl' \
git-gui: Gracefully handle bad TCL_PATH at compile time Petr Baudis pointed out the main git.git repository's Makefile dies now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not set to a working tclsh program path. This breaks people who may have a working build configuration today and suddenly upgrade to the latest git release. The tclIndex is required for git-gui to load its associated lib files, but using the Tcl auto_load procedure to source only the files we need is a performance optimization. We can emulate the auto_load by just source'ing every file in that directory, assuming we source class.tcl first to initialize our crude class system. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-18 00:01:50 +02:00
| $(TCL_PATH) $(QUIET_2DEVNULL); then : ok; \
else \
echo 1>&2 " * $(TCL_PATH) failed; using unoptimized loading"; \
rm -f $@ ; \
echo '# Autogenerated by git-gui Makefile' >$@ && \
echo >>$@ && \
$(foreach p,$(PRELOAD_FILES) $(ALL_LIBFILES),echo '$(subst lib/,,$p)' >>$@ &&) \
echo >>$@ ; \
fi
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
git-gui: Revert "git-gui: Display all authors of git-gui." This reverts commit 871f4c97ad7e021d1a0a98c80c5da77fcf70e4af. Too many users have complained about the credits generator in git-gui, so I'm backing the entire thing out. This revert will finish that series. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-12 18:26:04 +01:00
# These can record GITGUI_VERSION
git-gui: Track our own embedded values and rebuild when they change Like core-Git we now track the values that we embed into our shell script wrapper, and we "recompile" that wrapper if they are changed. This concept was lifted from git.git's Makefile, where a similar thing was done by Eygene Ryabinkin. Too bad it wasn't just done here in git-gui from the beginning, as the git.git Makefile support for GIT-GUI-VARS was really just because git-gui doesn't do it on its own. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-04-29 09:02:10 +02:00
$(patsubst %.sh,%,$(SCRIPT_SH)): GIT-VERSION-FILE GIT-GUI-VARS
git-gui: Gracefully handle bad TCL_PATH at compile time Petr Baudis pointed out the main git.git repository's Makefile dies now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not set to a working tclsh program path. This breaks people who may have a working build configuration today and suddenly upgrade to the latest git release. The tclIndex is required for git-gui to load its associated lib files, but using the Tcl auto_load procedure to source only the files we need is a performance optimization. We can emulate the auto_load by just source'ing every file in that directory, assuming we source class.tcl first to initialize our crude class system. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-18 00:01:50 +02:00
lib/tclIndex: GIT-GUI-VARS
git-gui: Track our own embedded values and rebuild when they change Like core-Git we now track the values that we embed into our shell script wrapper, and we "recompile" that wrapper if they are changed. This concept was lifted from git.git's Makefile, where a similar thing was done by Eygene Ryabinkin. Too bad it wasn't just done here in git-gui from the beginning, as the git.git Makefile support for GIT-GUI-VARS was really just because git-gui doesn't do it on its own. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-04-29 09:02:10 +02:00
TRACK_VARS = \
$(subst ','\'',SHELL_PATH='$(SHELL_PATH_SQ)') \
git-gui: Gracefully handle bad TCL_PATH at compile time Petr Baudis pointed out the main git.git repository's Makefile dies now if git-gui 0.7.0-rc1 or later is being used and TCL_PATH was not set to a working tclsh program path. This breaks people who may have a working build configuration today and suddenly upgrade to the latest git release. The tclIndex is required for git-gui to load its associated lib files, but using the Tcl auto_load procedure to source only the files we need is a performance optimization. We can emulate the auto_load by just source'ing every file in that directory, assuming we source class.tcl first to initialize our crude class system. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-18 00:01:50 +02:00
$(subst ','\'',TCL_PATH='$(TCL_PATH_SQ)') \
git-gui: Track our own embedded values and rebuild when they change Like core-Git we now track the values that we embed into our shell script wrapper, and we "recompile" that wrapper if they are changed. This concept was lifted from git.git's Makefile, where a similar thing was done by Eygene Ryabinkin. Too bad it wasn't just done here in git-gui from the beginning, as the git.git Makefile support for GIT-GUI-VARS was really just because git-gui doesn't do it on its own. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-04-29 09:02:10 +02:00
$(subst ','\'',TCLTK_PATH='$(TCLTK_PATH_SQ)') \
git-gui: Guess our share/git-gui/lib path at runtime if possible Johannes Sixt asked me to try to avoid embedding the runtime location of git-gui's library directory in the executable script. Not embedding it helps the MinGW to be relocatable to another directory should a user wish to install the programs in a directory other than the location the packager wanted them to be installed into. Most of this is a hack. We try to determine if the path of our master git-gui script will be able to locate the lib by ../share/git-gui/lib. This should be true if $(gitexecdir) and $(libdir) have the same prefix. If they do then we defer the assignment of $(libdir) until runtime, and we get it from $argv0 rather than embedding it into the script itself. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-27 06:03:37 +02:00
$(subst ','\'',gitexecdir='$(gitexecdir_SQ)') \
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
$(subst ','\'',libdir='$(libdir_SQ)') \
git-gui: Track our own embedded values and rebuild when they change Like core-Git we now track the values that we embed into our shell script wrapper, and we "recompile" that wrapper if they are changed. This concept was lifted from git.git's Makefile, where a similar thing was done by Eygene Ryabinkin. Too bad it wasn't just done here in git-gui from the beginning, as the git.git Makefile support for GIT-GUI-VARS was really just because git-gui doesn't do it on its own. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-04-29 09:02:10 +02:00
#end TRACK_VARS
GIT-GUI-VARS: .FORCE-GIT-GUI-VARS
@VARS='$(TRACK_VARS)'; \
if test x"$$VARS" != x"`cat $@ 2>/dev/null`" ; then \
echo 1>&2 " * new locations or Tcl/Tk interpreter"; \
echo 1>$@ "$$VARS"; \
fi
git-gui: Revert "git-gui: Display all authors of git-gui." This reverts commit 871f4c97ad7e021d1a0a98c80c5da77fcf70e4af. Too many users have complained about the credits generator in git-gui, so I'm backing the entire thing out. This revert will finish that series. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-12 18:26:04 +01:00
Makefile rules for translation catalog generation and installation. [jes: with fixes by the i18n team.] Signed-off-by: Christian Stimming <stimming@tuhh.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2007-07-21 14:17:07 +02:00
all:: $(ALL_PROGRAMS) lib/tclIndex $(ALL_MSGFILES)
git-gui: Created makefile to install the program. Since we want to be installed in gitexecdir so that "git gui" works we can guess where that directory is by asking the git wrapper executable and locating ourselves at the same location using the same install rules as core git. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2006-11-16 02:04:17 +01:00
install: all
git-gui: Quiet our installation process Alex Riesen wanted a quieter installation process for git and its contained git-gui. His earlier patch to do this failed to work properly when V=1, and didn't really give a great indication of what the installation was doing. These rules are a little bit on the messy side, as each of our install actions is composed of at least two variables, but in the V=1 case the text is identical to what we had before, while in the non-V=1 case we use some more complex rules to show the interesting details, and hide the less interesting bits. We now can also set QUIET= (nothing) to see the rules that are used when V= (nothing), so we can debug those too if we have to. This is actually a side-effect of how we insert the @ into the rules we use for the "lists of things", like our builtins or our library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-06-03 02:56:51 +02:00
$(QUIET)$(INSTALL_D0)'$(DESTDIR_SQ)$(gitexecdir_SQ)' $(INSTALL_D1)
$(QUIET)$(INSTALL_X0)git-gui $(INSTALL_X1) '$(DESTDIR_SQ)$(gitexecdir_SQ)'
$(QUIET)$(foreach p,$(GITGUI_BUILT_INS), $(INSTALL_L0)'$(DESTDIR_SQ)$(gitexecdir_SQ)/$p' $(INSTALL_L1)'$(DESTDIR_SQ)$(gitexecdir_SQ)/git-gui' $(INSTALL_L2)'$(DESTDIR_SQ)$(gitexecdir_SQ)/$p' $(INSTALL_L3) &&) true
$(QUIET)$(INSTALL_D0)'$(DESTDIR_SQ)$(libdir_SQ)' $(INSTALL_D1)
$(QUIET)$(INSTALL_R0)lib/tclIndex $(INSTALL_R1) '$(DESTDIR_SQ)$(libdir_SQ)'
$(QUIET)$(foreach p,$(ALL_LIBFILES), $(INSTALL_R0)$p $(INSTALL_R1) '$(DESTDIR_SQ)$(libdir_SQ)' &&) true
Makefile rules for translation catalog generation and installation. [jes: with fixes by the i18n team.] Signed-off-by: Christian Stimming <stimming@tuhh.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2007-07-21 14:17:07 +02:00
$(QUIET)$(INSTALL_D0)'$(DESTDIR_SQ)$(msgsdir_SQ)' $(INSTALL_D1)
$(QUIET)$(foreach p,$(ALL_MSGFILES), $(INSTALL_R0)$p $(INSTALL_R1) '$(DESTDIR_SQ)$(msgsdir_SQ)' &&) true
git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
git-gui: Revert "git-gui: Display all authors of git-gui." This reverts commit 871f4c97ad7e021d1a0a98c80c5da77fcf70e4af. Too many users have complained about the credits generator in git-gui, so I'm backing the entire thing out. This revert will finish that series. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-03-12 18:26:04 +01:00
dist-version:
git-gui: Generate a version file on demand. Because git-gui is being shipped as a subproject of the main Git project and will often have a different lifecycle than the main Git project, we should ship our own version number in the release tarball rather than relying on the main Git version file. Git's master Makefile will invoke our own with the target dist-version, asking us to save off our GITGUI_VERSION value into our own version file, so that our GIT-VERSION-GEN script can recover it at build time. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-12 22:14:44 +01:00
@mkdir -p $(TARDIR)
@echo $(GITGUI_VERSION) > $(TARDIR)/version
git-gui: Modified makefile to embed version into git-gui script. We want to embed the version of git-gui directly into the script file, so that we can display it properly in the about dialog. Consequently I've refactored the Makefile process to act like the one in core git.git with regards to shell scripts, allowing git-gui to be constructed by a sed replacement performed on git-gui.sh. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:00:07 +01:00
clean::
Makefile rules for translation catalog generation and installation. [jes: with fixes by the i18n team.] Signed-off-by: Christian Stimming <stimming@tuhh.de> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2007-07-21 14:17:07 +02:00
rm -f $(ALL_PROGRAMS) lib/tclIndex po/*.msg
git-gui: Refactor into multiple files to save my sanity I'm finding it difficult to work with a 6,000+ line Tcl script and not go insane while looking for a particular block of code. Since most of the program is organized into different units of functionality and not all users will need all units immediately on startup we can improve things by splitting procs out into multiple files and let auto_load handle things for us. This should help not only to better organize the source, but it may also improve startup times for some users as the Tcl parser does not need to read as much script before it can show the UI. In many cases the user can avoid reading at least half of git-gui now. Unfortunately we now need a library directory in our runtime location. This is currently assumed to be $(sharedir)/git-gui/lib and its expected that the Makefile invoker will setup some sort of reasonable sharedir value for us, or let us assume its going to be $(gitexecdir)/../share. We now also require a tclsh (in TCL_PATH) to just run the Makefile, as we use tclsh to generate the tclIndex for our lib directory. I'm hoping this is not an unncessary burden on end-users who are building from source. I haven't really made any functionality changes here, this is just a huge migration of code from one file to many smaller files. All of the new changes are to setup the library path and install the library files. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-05-08 05:35:48 +02:00
rm -f GIT-VERSION-FILE GIT-GUI-VARS
git-gui: Ensure version number is always current. I'm stealing the exact logic used by core Git within its own Makefile to setup the version number within scripts and executables. This way we can be sure that the version number is always updated after a commit, and that the version number also reflects when it is coming from a dirty working directory (and is thus pretty worthless). I've cleaned up some of the version display code in the about dialog too. There were simply too many blank lines in the bottom section where we showed the version data. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:31:09 +01:00
git-gui: Generate a version file on demand. Because git-gui is being shipped as a subproject of the main Git project and will often have a different lifecycle than the main Git project, we should ship our own version number in the release tarball rather than relying on the main Git version file. Git's master Makefile will invoke our own with the target dist-version, asking us to save off our GITGUI_VERSION value into our own version file, so that our GIT-VERSION-GEN script can recover it at build time. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-02-12 22:14:44 +01:00
.PHONY: all install dist-version clean
git-gui: Ensure version number is always current. I'm stealing the exact logic used by core Git within its own Makefile to setup the version number within scripts and executables. This way we can be sure that the version number is always updated after a commit, and that the version number also reflects when it is coming from a dirty working directory (and is thus pretty worthless). I've cleaned up some of the version display code in the about dialog too. There were simply too many blank lines in the bottom section where we showed the version data. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-01-21 02:31:09 +01:00
.PHONY: .FORCE-GIT-VERSION-FILE
git-gui: Track our own embedded values and rebuild when they change Like core-Git we now track the values that we embed into our shell script wrapper, and we "recompile" that wrapper if they are changed. This concept was lifted from git.git's Makefile, where a similar thing was done by Eygene Ryabinkin. Too bad it wasn't just done here in git-gui from the beginning, as the git.git Makefile support for GIT-GUI-VARS was really just because git-gui doesn't do it on its own. Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
2007-04-29 09:02:10 +02:00
.PHONY: .FORCE-GIT-GUI-VARS
Copy permalink