mirrors/git
1
0
Fork 0
mirror of https://github.com/git/git.git synced 2024-11-05 08:47:56 +01:00
Code Activity
git/send-pack.c

449 lines
9.8 KiB
C
Raw Normal View History

Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
#include "cache.h"
git-send-pack: verify that sender is a proper superset of receiver This should make sure that if you have multiple people pushing to the same tree, they cannot overwrite each others work, but have to merge before being able to update the common reference tree.
2005-07-19 13:03:47 +02:00
#include "commit.h"
Fix send-pack for non-commitish tags. Again I left the v2.6.11-tree tag behind. My bad. This commit makes sure that we do not barf when pushing a ref that is a non-commitish tag. You can update a remote ref under the following conditions: * You can always use --force. * Creating a brand new ref is OK. * If the remote ref is exactly the same as what you are pushing, it is OK (nothing is pushed). * You can replace a commitish with another commitish which is a descendant of it, if you can verify the ancestry between them; this and the above means you have to have what you are replacing. * Otherwise you cannot update; you need to use --force. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05 09:47:56 +02:00
#include "tag.h"
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
#include "refs.h"
Make send/receive-pack be closer to doing something interesting
2005-06-30 05:50:15 +02:00
#include "pkt-line.h"
Exec git programs without using PATH. The git suite may not be in PATH (and thus programs such as git-send-pack could not exec git-rev-list). Thus there is a need for logic that will locate these programs. Modifying PATH is not desirable as it result in behavior differing from the user's intentions, as we may end up prepending "/usr/bin" to PATH. - git C programs will use exec*_git_cmd() APIs to exec sub-commands. - exec*_git_cmd() will execute a git program by searching for it in the following directories: 1. --exec-path (as used by "git") 2. The GIT_EXEC_PATH environment variable. 3. $(gitexecdir) as set in Makefile (default value $(bindir)). - git wrapper will modify PATH as before to enable shell scripts to invoke "git-foo" commands. Ideally, shell scripts should use the git wrapper to become independent of PATH, and then modifying PATH will not be necessary. [jc: with minor updates after a brief review.] Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-11 03:12:17 +01:00
#include "exec_cmd.h"
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
[PATCH] Documentation: send/receive. This adds documentation for 'smarter push' family of commands. Signed-off-by: Junio C Hamano <junkio@cox.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-14 09:10:05 +02:00
static const char send_pack_usage[] =
Make send-pack --all and explicit ref mutually exclusive. send-pack had a confusing misfeature that "send-pack --all master" updated all refs, while "send-pack --all" did not do anything. Make --all and explicit refs mutually exclusive, and make sure "send-pack --all" updates all refs. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-02 21:20:27 +02:00
"git-send-pack [--all] [--exec=git-receive-pack] <remote> [<head>...]\n"
" --all and explicit <head> specification are mutually exclusive.";
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
static const char *exec = "git-receive-pack";
remove unnecessary initializations [jc: I needed to hand merge the changes to the updated codebase, so the result needs to be checked.] Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-15 19:23:48 +02:00
static int verbose;
static int send_all;
static int force_update;
static int use_thin_pack;
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
static int is_zero_sha1(const unsigned char *sha1)
{
int i;
for (i = 0; i < 20; i++) {
if (*sha1++)
return 0;
}
return 1;
}
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
static void exec_pack_objects(void)
{
Const tightening. Mark Wooding noticed there was a type mismatch warning in git.c; this patch does things slightly differently (mostly tightening const) and was what I was holding onto, waiting for the setup-revisions change to be merged into the master branch. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-05 11:47:29 +01:00
static const char *args[] = {
Exec git programs without using PATH. The git suite may not be in PATH (and thus programs such as git-send-pack could not exec git-rev-list). Thus there is a need for logic that will locate these programs. Modifying PATH is not desirable as it result in behavior differing from the user's intentions, as we may end up prepending "/usr/bin" to PATH. - git C programs will use exec*_git_cmd() APIs to exec sub-commands. - exec*_git_cmd() will execute a git program by searching for it in the following directories: 1. --exec-path (as used by "git") 2. The GIT_EXEC_PATH environment variable. 3. $(gitexecdir) as set in Makefile (default value $(bindir)). - git wrapper will modify PATH as before to enable shell scripts to invoke "git-foo" commands. Ideally, shell scripts should use the git wrapper to become independent of PATH, and then modifying PATH will not be necessary. [jc: with minor updates after a brief review.] Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-11 03:12:17 +01:00
"pack-objects",
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
"--stdout",
NULL
};
Exec git programs without using PATH. The git suite may not be in PATH (and thus programs such as git-send-pack could not exec git-rev-list). Thus there is a need for logic that will locate these programs. Modifying PATH is not desirable as it result in behavior differing from the user's intentions, as we may end up prepending "/usr/bin" to PATH. - git C programs will use exec*_git_cmd() APIs to exec sub-commands. - exec*_git_cmd() will execute a git program by searching for it in the following directories: 1. --exec-path (as used by "git") 2. The GIT_EXEC_PATH environment variable. 3. $(gitexecdir) as set in Makefile (default value $(bindir)). - git wrapper will modify PATH as before to enable shell scripts to invoke "git-foo" commands. Ideally, shell scripts should use the git wrapper to become independent of PATH, and then modifying PATH will not be necessary. [jc: with minor updates after a brief review.] Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-11 03:12:17 +01:00
execv_git_cmd(args);
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
die("git-pack-objects exec failed (%s)", strerror(errno));
}
static void exec_rev_list(struct ref *refs)
{
send-pack: switch to using git-rev-list --stdin When we are generating packs to update remote repositories we want to supply as much information as possible about the revisions that already exist to rev-list in order optimise the pack as much as possible. We need to pass two revisions for each branch we are updating in the remote repository and one for each additional branch. Where the remote repository has numerous branches we can run out of command line space to pass them. Utilise the git-rev-list --stdin mode to allow unlimited numbers of revision constraints. This allows us to move back to the much simpler unordered revision selection code. [jc: added some comments in the code to describe the pipe flow a bit.] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-05 23:52:12 +02:00
static const char *args[4];
int i = 0;
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
Exec git programs without using PATH. The git suite may not be in PATH (and thus programs such as git-send-pack could not exec git-rev-list). Thus there is a need for logic that will locate these programs. Modifying PATH is not desirable as it result in behavior differing from the user's intentions, as we may end up prepending "/usr/bin" to PATH. - git C programs will use exec*_git_cmd() APIs to exec sub-commands. - exec*_git_cmd() will execute a git program by searching for it in the following directories: 1. --exec-path (as used by "git") 2. The GIT_EXEC_PATH environment variable. 3. $(gitexecdir) as set in Makefile (default value $(bindir)). - git wrapper will modify PATH as before to enable shell scripts to invoke "git-foo" commands. Ideally, shell scripts should use the git wrapper to become independent of PATH, and then modifying PATH will not be necessary. [jc: with minor updates after a brief review.] Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-11 03:12:17 +01:00
args[i++] = "rev-list"; /* 0 */
send-pack --thin: use "thin pack" delta transfer. The new flag loosens the usual "self containedness" requirment of packfiles, and sends deltified representation of objects when we know the other side has the base objects needed to unpack them. This would help reducing the transfer size. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-20 00:03:49 +01:00
if (use_thin_pack) /* 1 */
args[i++] = "--objects-edge";
else
args[i++] = "--objects";
send-pack: do not give up when remote has insanely large number of refs. Stephen C. Tweedie noticed that we give up running rev-list when we see too many refs on the remote side. Limit the number of negative references we give to rev-list and continue. Not sending any negative references to rev-list is very bad -- we may be pushing a ref that is new to the other end. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-22 03:59:37 +01:00
send-pack: switch to using git-rev-list --stdin When we are generating packs to update remote repositories we want to supply as much information as possible about the revisions that already exist to rev-list in order optimise the pack as much as possible. We need to pass two revisions for each branch we are updating in the remote repository and one for each additional branch. Where the remote repository has numerous branches we can run out of command line space to pass them. Utilise the git-rev-list --stdin mode to allow unlimited numbers of revision constraints. This allows us to move back to the much simpler unordered revision selection code. [jc: added some comments in the code to describe the pipe flow a bit.] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-05 23:52:12 +02:00
args[i++] = "--stdin";
send-pack: do not give up when remote has insanely large number of refs. Stephen C. Tweedie noticed that we give up running rev-list when we see too many refs on the remote side. Limit the number of negative references we give to rev-list and continue. Not sending any negative references to rev-list is very bad -- we may be pushing a ref that is new to the other end. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-22 03:59:37 +01:00
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
args[i] = NULL;
Exec git programs without using PATH. The git suite may not be in PATH (and thus programs such as git-send-pack could not exec git-rev-list). Thus there is a need for logic that will locate these programs. Modifying PATH is not desirable as it result in behavior differing from the user's intentions, as we may end up prepending "/usr/bin" to PATH. - git C programs will use exec*_git_cmd() APIs to exec sub-commands. - exec*_git_cmd() will execute a git program by searching for it in the following directories: 1. --exec-path (as used by "git") 2. The GIT_EXEC_PATH environment variable. 3. $(gitexecdir) as set in Makefile (default value $(bindir)). - git wrapper will modify PATH as before to enable shell scripts to invoke "git-foo" commands. Ideally, shell scripts should use the git wrapper to become independent of PATH, and then modifying PATH will not be necessary. [jc: with minor updates after a brief review.] Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-01-11 03:12:17 +01:00
execv_git_cmd(args);
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
die("git-rev-list exec failed (%s)", strerror(errno));
}
send-pack: switch to using git-rev-list --stdin When we are generating packs to update remote repositories we want to supply as much information as possible about the revisions that already exist to rev-list in order optimise the pack as much as possible. We need to pass two revisions for each branch we are updating in the remote repository and one for each additional branch. Where the remote repository has numerous branches we can run out of command line space to pass them. Utilise the git-rev-list --stdin mode to allow unlimited numbers of revision constraints. This allows us to move back to the much simpler unordered revision selection code. [jc: added some comments in the code to describe the pipe flow a bit.] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-05 23:52:12 +02:00
/*
* Run "rev-list --stdin | pack-objects" pipe.
*/
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
static void rev_list(int fd, struct ref *refs)
{
int pipe_fd[2];
pid_t pack_objects_pid;
if (pipe(pipe_fd) < 0)
die("rev-list setup: pipe failed");
pack_objects_pid = fork();
if (!pack_objects_pid) {
send-pack: switch to using git-rev-list --stdin When we are generating packs to update remote repositories we want to supply as much information as possible about the revisions that already exist to rev-list in order optimise the pack as much as possible. We need to pass two revisions for each branch we are updating in the remote repository and one for each additional branch. Where the remote repository has numerous branches we can run out of command line space to pass them. Utilise the git-rev-list --stdin mode to allow unlimited numbers of revision constraints. This allows us to move back to the much simpler unordered revision selection code. [jc: added some comments in the code to describe the pipe flow a bit.] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-05 23:52:12 +02:00
/* The child becomes pack-objects; reads from pipe
* and writes to the original fd
*/
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
dup2(pipe_fd[0], 0);
dup2(fd, 1);
close(pipe_fd[0]);
close(pipe_fd[1]);
close(fd);
exec_pack_objects();
die("pack-objects setup failed");
}
if (pack_objects_pid < 0)
die("pack-objects fork failed");
send-pack: switch to using git-rev-list --stdin When we are generating packs to update remote repositories we want to supply as much information as possible about the revisions that already exist to rev-list in order optimise the pack as much as possible. We need to pass two revisions for each branch we are updating in the remote repository and one for each additional branch. Where the remote repository has numerous branches we can run out of command line space to pass them. Utilise the git-rev-list --stdin mode to allow unlimited numbers of revision constraints. This allows us to move back to the much simpler unordered revision selection code. [jc: added some comments in the code to describe the pipe flow a bit.] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-05 23:52:12 +02:00
/* We become rev-list --stdin; output goes to pipe. */
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
dup2(pipe_fd[1], 1);
close(pipe_fd[0]);
close(pipe_fd[1]);
close(fd);
exec_rev_list(refs);
}
send-pack: switch to using git-rev-list --stdin When we are generating packs to update remote repositories we want to supply as much information as possible about the revisions that already exist to rev-list in order optimise the pack as much as possible. We need to pass two revisions for each branch we are updating in the remote repository and one for each additional branch. Where the remote repository has numerous branches we can run out of command line space to pass them. Utilise the git-rev-list --stdin mode to allow unlimited numbers of revision constraints. This allows us to move back to the much simpler unordered revision selection code. [jc: added some comments in the code to describe the pipe flow a bit.] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-05 23:52:12 +02:00
/*
* Create "rev-list --stdin | pack-objects" pipe and feed
* the refs into the pipeline.
*/
static void rev_list_generate(int fd, struct ref *refs)
{
int pipe_fd[2];
pid_t rev_list_generate_pid;
if (pipe(pipe_fd) < 0)
die("rev-list-generate setup: pipe failed");
rev_list_generate_pid = fork();
if (!rev_list_generate_pid) {
/* The child becomes the "rev-list | pack-objects"
* pipeline. It takes input from us, and its output
* goes to fd.
*/
dup2(pipe_fd[0], 0);
dup2(fd, 1);
close(pipe_fd[0]);
close(pipe_fd[1]);
close(fd);
rev_list(fd, refs);
die("rev-list setup failed");
}
if (rev_list_generate_pid < 0)
die("rev-list-generate fork failed");
/* We feed the rev parameters to them. We do not write into
* fd nor read from the pipe.
*/
close(pipe_fd[0]);
close(fd);
while (refs) {
char buf[42];
if (!is_null_sha1(refs->old_sha1) &&
has_sha1_file(refs->old_sha1)) {
memcpy(buf + 1, sha1_to_hex(refs->old_sha1), 40);
buf[0] = '^';
buf[41] = '\n';
write(pipe_fd[1], buf, 42);
}
if (!is_null_sha1(refs->new_sha1)) {
memcpy(buf, sha1_to_hex(refs->new_sha1), 40);
buf[40] = '\n';
write(pipe_fd[1], buf, 41);
}
refs = refs->next;
}
close(pipe_fd[1]);
// waitpid(rev_list_generate_pid);
exit(0);
}
/*
* Make a pack stream and spit it out into file descriptor fd
*/
Make pack_objects void. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-14 22:38:50 +02:00
static void pack_objects(int fd, struct ref *refs)
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
{
pid_t rev_list_pid;
rev_list_pid = fork();
if (!rev_list_pid) {
send-pack: switch to using git-rev-list --stdin When we are generating packs to update remote repositories we want to supply as much information as possible about the revisions that already exist to rev-list in order optimise the pack as much as possible. We need to pass two revisions for each branch we are updating in the remote repository and one for each additional branch. Where the remote repository has numerous branches we can run out of command line space to pass them. Utilise the git-rev-list --stdin mode to allow unlimited numbers of revision constraints. This allows us to move back to the much simpler unordered revision selection code. [jc: added some comments in the code to describe the pipe flow a bit.] Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-05 23:52:12 +02:00
rev_list_generate(fd, refs);
git-send-pack: actually send the object pack This concludes this lesson. I've actually successfully sent an update using the git-send-pack command. Probably tons of work still to do, and nasty debugging, but it's now actually potentially useful.
2005-06-30 19:17:39 +02:00
die("rev-list setup failed");
}
if (rev_list_pid < 0)
die("rev-list fork failed");
/*
* We don't wait for the rev-list pipeline in the parent:
* we end up waiting for the other end instead
*/
}
git-send-pack: start parsing local/remote reference differences Right now it just shows which refs it picks up, and whether they are the same or changed on the remote end. Getting there..
2005-06-30 07:31:41 +02:00
Fix ref_newer() in send-pack. When more than two references need to be checked with ref_newer() function, the second and later calls did not work correctly. This was because the later calls found commits retained by the "struct object" layer that still had smudges made by earlier calls. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-06 08:05:33 +02:00
static void unmark_and_free(struct commit_list *list, unsigned int mark)
{
while (list) {
struct commit_list *temp = list;
temp->item->object.flags &= ~mark;
list = temp->next;
free(temp);
}
}
Fix send-pack for non-commitish tags. Again I left the v2.6.11-tree tag behind. My bad. This commit makes sure that we do not barf when pushing a ref that is a non-commitish tag. You can update a remote ref under the following conditions: * You can always use --force. * Creating a brand new ref is OK. * If the remote ref is exactly the same as what you are pushing, it is OK (nothing is pushed). * You can replace a commitish with another commitish which is a descendant of it, if you can verify the ancestry between them; this and the above means you have to have what you are replacing. * Otherwise you cannot update; you need to use --force. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05 09:47:56 +02:00
static int ref_newer(const unsigned char *new_sha1,
const unsigned char *old_sha1)
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
{
Fix send-pack for non-commitish tags. Again I left the v2.6.11-tree tag behind. My bad. This commit makes sure that we do not barf when pushing a ref that is a non-commitish tag. You can update a remote ref under the following conditions: * You can always use --force. * Creating a brand new ref is OK. * If the remote ref is exactly the same as what you are pushing, it is OK (nothing is pushed). * You can replace a commitish with another commitish which is a descendant of it, if you can verify the ancestry between them; this and the above means you have to have what you are replacing. * Otherwise you cannot update; you need to use --force. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05 09:47:56 +02:00
struct object *o;
struct commit *old, *new;
Fix ref_newer() in send-pack. When more than two references need to be checked with ref_newer() function, the second and later calls did not work correctly. This was because the later calls found commits retained by the "struct object" layer that still had smudges made by earlier calls. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-06 08:05:33 +02:00
struct commit_list *list, *used;
int found = 0;
git-send-pack: verify that sender is a proper superset of receiver This should make sure that if you have multiple people pushing to the same tree, they cannot overwrite each others work, but have to merge before being able to update the common reference tree.
2005-07-19 13:03:47 +02:00
Fix send-pack for non-commitish tags. Again I left the v2.6.11-tree tag behind. My bad. This commit makes sure that we do not barf when pushing a ref that is a non-commitish tag. You can update a remote ref under the following conditions: * You can always use --force. * Creating a brand new ref is OK. * If the remote ref is exactly the same as what you are pushing, it is OK (nothing is pushed). * You can replace a commitish with another commitish which is a descendant of it, if you can verify the ancestry between them; this and the above means you have to have what you are replacing. * Otherwise you cannot update; you need to use --force. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05 09:47:56 +02:00
/* Both new and old must be commit-ish and new is descendant of
* old. Otherwise we require --force.
*/
Be careful when dereferencing tags. One caller of deref_tag() was not careful enough to make sure what deref_tag() returned was not NULL (i.e. we found a tag object that points at an object we do not have). Fix it, and warn about refs that point at such an incomplete tag where needed. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-03 00:19:13 +01:00
o = deref_tag(parse_object(old_sha1), NULL, 0);
Remove TYPE_* constant macros and use object_type enums consistently. This updates the type-enumeration constants introduced to reduce the memory footprint of "struct object" to match the type bits already used in the packfile format, by removing the former (i.e. TYPE_* constant macros) and using the latter (i.e. enum object_type) throughout the code for consistency. Eventually we can stop passing around the "type strings" entirely, and this will help - no confusion about two different integer enumeration. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-12 05:45:31 +02:00
if (!o || o->type != OBJ_COMMIT)
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
return 0;
Fix send-pack for non-commitish tags. Again I left the v2.6.11-tree tag behind. My bad. This commit makes sure that we do not barf when pushing a ref that is a non-commitish tag. You can update a remote ref under the following conditions: * You can always use --force. * Creating a brand new ref is OK. * If the remote ref is exactly the same as what you are pushing, it is OK (nothing is pushed). * You can replace a commitish with another commitish which is a descendant of it, if you can verify the ancestry between them; this and the above means you have to have what you are replacing. * Otherwise you cannot update; you need to use --force. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05 09:47:56 +02:00
old = (struct commit *) o;
Be careful when dereferencing tags. One caller of deref_tag() was not careful enough to make sure what deref_tag() returned was not NULL (i.e. we found a tag object that points at an object we do not have). Fix it, and warn about refs that point at such an incomplete tag where needed. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-03 00:19:13 +01:00
o = deref_tag(parse_object(new_sha1), NULL, 0);
Remove TYPE_* constant macros and use object_type enums consistently. This updates the type-enumeration constants introduced to reduce the memory footprint of "struct object" to match the type bits already used in the packfile format, by removing the former (i.e. TYPE_* constant macros) and using the latter (i.e. enum object_type) throughout the code for consistency. Eventually we can stop passing around the "type strings" entirely, and this will help - no confusion about two different integer enumeration. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-12 05:45:31 +02:00
if (!o || o->type != OBJ_COMMIT)
git-send-pack: verify that sender is a proper superset of receiver This should make sure that if you have multiple people pushing to the same tree, they cannot overwrite each others work, but have to merge before being able to update the common reference tree.
2005-07-19 13:03:47 +02:00
return 0;
Fix send-pack for non-commitish tags. Again I left the v2.6.11-tree tag behind. My bad. This commit makes sure that we do not barf when pushing a ref that is a non-commitish tag. You can update a remote ref under the following conditions: * You can always use --force. * Creating a brand new ref is OK. * If the remote ref is exactly the same as what you are pushing, it is OK (nothing is pushed). * You can replace a commitish with another commitish which is a descendant of it, if you can verify the ancestry between them; this and the above means you have to have what you are replacing. * Otherwise you cannot update; you need to use --force. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05 09:47:56 +02:00
new = (struct commit *) o;
git-send-pack: verify that sender is a proper superset of receiver This should make sure that if you have multiple people pushing to the same tree, they cannot overwrite each others work, but have to merge before being able to update the common reference tree.
2005-07-19 13:03:47 +02:00
if (parse_commit(new) < 0)
return 0;
Fix ref_newer() in send-pack. When more than two references need to be checked with ref_newer() function, the second and later calls did not work correctly. This was because the later calls found commits retained by the "struct object" layer that still had smudges made by earlier calls. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-06 08:05:33 +02:00
used = list = NULL;
git-send-pack: verify that sender is a proper superset of receiver This should make sure that if you have multiple people pushing to the same tree, they cannot overwrite each others work, but have to merge before being able to update the common reference tree.
2005-07-19 13:03:47 +02:00
commit_list_insert(new, &list);
Fix potential send-pack SIGSEGV The check that the source is ahead of the destination incorrectly expects pop_most_recent_commit() to gracefully handle an empty list. Fix by just checking the list itself, rather than the return value of the pop function. [jc: I did the test script that demonstrated the problem] Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-07-27 05:04:22 +02:00
while (list) {
new = pop_most_recent_commit(&list, 1);
Fix ref_newer() in send-pack. When more than two references need to be checked with ref_newer() function, the second and later calls did not work correctly. This was because the later calls found commits retained by the "struct object" layer that still had smudges made by earlier calls. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-06 08:05:33 +02:00
commit_list_insert(new, &used);
if (new == old) {
found = 1;
break;
}
git-send-pack: verify that sender is a proper superset of receiver This should make sure that if you have multiple people pushing to the same tree, they cannot overwrite each others work, but have to merge before being able to update the common reference tree.
2005-07-19 13:03:47 +02:00
}
Fix ref_newer() in send-pack. When more than two references need to be checked with ref_newer() function, the second and later calls did not work correctly. This was because the later calls found commits retained by the "struct object" layer that still had smudges made by earlier calls. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-06 08:05:33 +02:00
unmark_and_free(list, 1);
unmark_and_free(used, 1);
return found;
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
}
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
static struct ref *local_refs, **local_tail;
static struct ref *remote_refs, **remote_tail;
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
static int one_local_ref(const char *refname, const unsigned char *sha1)
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
{
struct ref *ref;
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
int len = strlen(refname) + 1;
ref = xcalloc(1, sizeof(*ref) + len);
Convert memcpy(a,b,20) to hashcpy(a,b). This abstracts away the size of the hash values when copying them from memory location to memory location, much as the introduction of hashcmp abstracted away hash value comparsion. A few call sites were using char* rather than unsigned char* so I added the cast rather than open hashcpy to be void*. This is a reasonable tradeoff as most call sites already use unsigned char* and the existing hashcmp is also declared to be unsigned char*. [jc: Splitted the patch to "master" part, to be followed by a patch for merge-recursive.c which is not in "master" yet. Fixed the cast in the latter hunk to combine-diff.c which was wrong in the original. Also converted ones left-over in combine-diff.c, diff-lib.c and upload-pack.c ] Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-23 08:49:00 +02:00
hashcpy(ref->new_sha1, sha1);
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
memcpy(ref->name, refname, len);
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
*local_tail = ref;
local_tail = &ref->next;
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
return 0;
}
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
static void get_local_heads(void)
{
local_tail = &local_refs;
for_each_ref(one_local_ref);
}
send-pack/receive-pack: allow errors to be reported back to pusher. This updates the protocol between git-send-pack/git-receive-pack in a backward compatible way to allow failures at the receiving end to be propagated back to the sender. Most notably, versions of git-push before this could not notice if the update hook on the receiving end refused to update the ref for its own policy reasons. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-26 08:18:37 +01:00
static int receive_status(int in)
{
char line[1000];
int ret = 0;
int len = packet_read_line(in, line, sizeof(line));
if (len < 10 || memcmp(line, "unpack ", 7)) {
fprintf(stderr, "did not receive status back\n");
return -1;
}
if (memcmp(line, "unpack ok\n", 10)) {
fputs(line, stderr);
ret = -1;
}
while (1) {
len = packet_read_line(in, line, sizeof(line));
if (!len)
break;
if (len < 3 ||
(memcmp(line, "ok", 2) && memcmp(line, "ng", 2))) {
fprintf(stderr, "protocol error: %s\n", line);
ret = -1;
break;
}
if (!memcmp(line, "ok", 2))
continue;
fputs(line, stderr);
ret = -1;
}
return ret;
}
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
static int send_pack(int in, int out, int nr_refspec, char **refspec)
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
{
Slow but steady progress on git pack receive/send
2005-06-30 07:50:48 +02:00
struct ref *ref;
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
int new_refs;
Make git-send-pack exit with error when some refs couldn't be pushed out In case some refs couldn't be pushed out due to an error (mostly the not-a-proper-subset error), make git-send-pack exit with non-zero status after the push is over (that is, it still tries to push out the rest of the refs). [jc: I adjusted a test for this change.] Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-14 01:45:40 +01:00
int ret = 0;
send-pack/receive-pack: allow errors to be reported back to pusher. This updates the protocol between git-send-pack/git-receive-pack in a backward compatible way to allow failures at the receiving end to be propagated back to the sender. Most notably, versions of git-push before this could not notice if the update hook on the receiving end refused to update the ref for its own policy reasons. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-26 08:18:37 +01:00
int ask_for_status_report = 0;
int expect_status_report = 0;
Slow but steady progress on git pack receive/send
2005-06-30 07:50:48 +02:00
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
/* No funny business with the matcher */
Improve git-peek-remote This makes git-peek-remote able to basically do everything that git-ls-remote does (but obviously just for the native protocol, so no http[s]: or rsync: support). The default behaviour is the same, but you can now give a mixture of "--refs", "--tags" and "--heads" flags, where "--refs" forces git-peek-remote to only show real refs (ie none of the fakey tag lookups, but also not the special pseudo-refs like HEAD and MERGE_HEAD). The "--tags" and "--heads" flags respectively limit the output to just regular tags and heads, of course. You can still also ask to limit them by name too. You can combine the flags, so git peek-remote --refs --tags . will show all local _true_ tags, without the generated tag lookups (compare the output without the "--refs" flag). And "--tags --heads" will show both tags and heads, but will avoid (for example) any special refs outside of the standard locations. I'm also planning on adding a "--ignore-local" flag that allows us to ask it to ignore any refs that we already have in the local tree, but that's an independent thing. All this is obviously gearing up to making "git fetch" cheaper. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-07-04 21:29:10 +02:00
remote_tail = get_remote_heads(in, &remote_refs, 0, NULL, REF_NORMAL);
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
get_local_heads();
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
send-pack/receive-pack: allow errors to be reported back to pusher. This updates the protocol between git-send-pack/git-receive-pack in a backward compatible way to allow failures at the receiving end to be propagated back to the sender. Most notably, versions of git-push before this could not notice if the update hook on the receiving end refused to update the ref for its own policy reasons. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-26 08:18:37 +01:00
/* Does the other end support the reporting? */
if (server_supports("report-status"))
ask_for_status_report = 1;
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
/* match them up */
if (!remote_tail)
remote_tail = &remote_refs;
if (match_refs(local_refs, remote_refs, &remote_tail,
nr_refspec, refspec, send_all))
return -1;
Warn when send-pack does nothing If you try to push into an empty repository with no ref arguments to git push, it doesn't do anything and doesn't say anything. This adds a warning when send-pack isn't going to push anything, so you don't assume that it silently did what you wanted. Signed-off-by: Daniel Barkalow <barkalow@iabervon.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-04 17:59:37 +01:00
if (!remote_refs) {
fprintf(stderr, "No refs in common and none specified; doing nothing.\n");
return 0;
}
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
/*
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
* Finally, tell the other end!
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
*/
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
new_refs = 0;
for (ref = remote_refs; ref; ref = ref->next) {
char old_hex[60], *new_hex;
if (!ref->peer_ref)
Slow but steady progress on git pack receive/send
2005-06-30 07:50:48 +02:00
continue;
Do not use memcmp(sha1_1, sha1_2, 20) with hardcoded length. Introduces global inline: hashcmp(const unsigned char *sha1, const unsigned char *sha2) Uses memcmp for comparison and returns the result based on the length of the hash name (a future runtime decision). Acked-by: Alex Riesen <raa.lkml@gmail.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-17 20:54:57 +02:00
if (!hashcmp(ref->old_sha1, ref->peer_ref->new_sha1)) {
Make "git-send-pack" less verbose by default It used to make sense to have git-send-pack talk about the things it sent when (a) it was a new program and (b) nobody had a lot of tags and branches. These days, it's just distracting to see tons of 'refs/tags/xyz': up-to-date ... when updating a remote repo. So shut it up by default, and add a "--verbose" flag for those who really want to see it. Also, since this makes he case of everything being up-to-date just totally silent, make it say "Everything up-to-date" if no refs needed updating. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-21 03:13:02 +01:00
if (verbose)
fprintf(stderr, "'%s': up-to-date\n", ref->name);
Fix send-pack for non-commitish tags. Again I left the v2.6.11-tree tag behind. My bad. This commit makes sure that we do not barf when pushing a ref that is a non-commitish tag. You can update a remote ref under the following conditions: * You can always use --force. * Creating a brand new ref is OK. * If the remote ref is exactly the same as what you are pushing, it is OK (nothing is pushed). * You can replace a commitish with another commitish which is a descendant of it, if you can verify the ancestry between them; this and the above means you have to have what you are replacing. * Otherwise you cannot update; you need to use --force. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05 09:47:56 +02:00
continue;
}
/* This part determines what can overwrite what.
* The rules are:
*
Support +<src>:<dst> format in push as well. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-24 09:40:14 +02:00
* (0) you can always use --force or +A:B notation to
* selectively force individual ref pairs.
Fix send-pack for non-commitish tags. Again I left the v2.6.11-tree tag behind. My bad. This commit makes sure that we do not barf when pushing a ref that is a non-commitish tag. You can update a remote ref under the following conditions: * You can always use --force. * Creating a brand new ref is OK. * If the remote ref is exactly the same as what you are pushing, it is OK (nothing is pushed). * You can replace a commitish with another commitish which is a descendant of it, if you can verify the ancestry between them; this and the above means you have to have what you are replacing. * Otherwise you cannot update; you need to use --force. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-05 09:47:56 +02:00
*
* (1) if the old thing does not exist, it is OK.
*
* (2) if you do not have the old thing, you are not allowed
* to overwrite it; you would not know what you are losing
* otherwise.
*
* (3) if both new and old are commit-ish, and new is a
* descendant of old, it is OK.
*/
Support +<src>:<dst> format in push as well. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-24 09:40:14 +02:00
if (!force_update &&
!is_zero_sha1(ref->old_sha1) &&
!ref->force) {
send-pack: reword non-fast-forward error message. Wnen refusing to push a head, we said cryptic "remote 'branch' object X does not exist on local" or "remote ref 'branch' is not a strict subset of local ref 'branch'". That was gittish. Since the most likely reason this happens is because the pushed head was not up-to-date, clarify the error message to say that straight, and suggest pulling first. First noticed by Johannes and seconded by Andreas. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-22 21:39:39 +01:00
if (!has_sha1_file(ref->old_sha1) ||
!ref_newer(ref->peer_ref->new_sha1,
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
ref->old_sha1)) {
send-pack: reword non-fast-forward error message. Wnen refusing to push a head, we said cryptic "remote 'branch' object X does not exist on local" or "remote ref 'branch' is not a strict subset of local ref 'branch'". That was gittish. Since the most likely reason this happens is because the pushed head was not up-to-date, clarify the error message to say that straight, and suggest pulling first. First noticed by Johannes and seconded by Andreas. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-22 21:39:39 +01:00
/* We do not have the remote ref, or
* we know that the remote ref is not
* an ancestor of what we are trying to
* push. Either way this can be losing
* commits at the remote end and likely
* we were not up to date to begin with.
*/
error("remote '%s' is not a strict "
"subset of local ref '%s'. "
"maybe you are not up-to-date and "
"need to pull first?",
ref->name,
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
ref->peer_ref->name);
Make git-send-pack exit with error when some refs couldn't be pushed out In case some refs couldn't be pushed out due to an error (mostly the not-a-proper-subset error), make git-send-pack exit with non-zero status after the push is over (that is, it still tries to push out the rest of the refs). [jc: I adjusted a test for this change.] Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-14 01:45:40 +01:00
ret = -2;
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
continue;
}
git-send-pack: start parsing local/remote reference differences Right now it just shows which refs it picks up, and whether they are the same or changed on the remote end. Getting there..
2005-06-30 07:31:41 +02:00
}
Convert memcpy(a,b,20) to hashcpy(a,b). This abstracts away the size of the hash values when copying them from memory location to memory location, much as the introduction of hashcmp abstracted away hash value comparsion. A few call sites were using char* rather than unsigned char* so I added the cast rather than open hashcpy to be void*. This is a reasonable tradeoff as most call sites already use unsigned char* and the existing hashcmp is also declared to be unsigned char*. [jc: Splitted the patch to "master" part, to be followed by a patch for merge-recursive.c which is not in "master" yet. Fixed the cast in the latter hunk to combine-diff.c which was wrong in the original. Also converted ones left-over in combine-diff.c, diff-lib.c and upload-pack.c ] Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-08-23 08:49:00 +02:00
hashcpy(ref->new_sha1, ref->peer_ref->new_sha1);
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
if (is_zero_sha1(ref->new_sha1)) {
error("cannot happen anymore");
Make git-send-pack exit with error when some refs couldn't be pushed out In case some refs couldn't be pushed out due to an error (mostly the not-a-proper-subset error), make git-send-pack exit with non-zero status after the push is over (that is, it still tries to push out the rest of the refs). [jc: I adjusted a test for this change.] Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-14 01:45:40 +01:00
ret = -3;
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
continue;
}
new_refs++;
Slow but steady progress on git pack receive/send
2005-06-30 07:50:48 +02:00
strcpy(old_hex, sha1_to_hex(ref->old_sha1));
new_hex = sha1_to_hex(ref->new_sha1);
send-pack/receive-pack: allow errors to be reported back to pusher. This updates the protocol between git-send-pack/git-receive-pack in a backward compatible way to allow failures at the receiving end to be propagated back to the sender. Most notably, versions of git-push before this could not notice if the update hook on the receiving end refused to update the ref for its own policy reasons. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-26 08:18:37 +01:00
if (ask_for_status_report) {
packet_write(out, "%s %s %s%c%s",
old_hex, new_hex, ref->name, 0,
"report-status");
ask_for_status_report = 0;
expect_status_report = 1;
}
else
packet_write(out, "%s %s %s",
old_hex, new_hex, ref->name);
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
fprintf(stderr, "updating '%s'", ref->name);
if (strcmp(ref->name, ref->peer_ref->name))
fprintf(stderr, " using '%s'", ref->peer_ref->name);
fprintf(stderr, "\n from %s\n to %s\n", old_hex, new_hex);
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
}
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
Make send/receive-pack be closer to doing something interesting
2005-06-30 05:50:15 +02:00
packet_flush(out);
Teach 'git-send-pack' to send new branches and tags. The protocol always supported it, but send-pack didn't actually know how to tell the other side about a new branch/tag. NOTE! You'll have to name it explicitly on the command line: if you don't name any branches, git-send-pack will default to the branches that already exist.
2005-07-08 22:58:40 +02:00
if (new_refs)
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
pack_objects(out, remote_refs);
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
close(out);
send-pack/receive-pack: allow errors to be reported back to pusher. This updates the protocol between git-send-pack/git-receive-pack in a backward compatible way to allow failures at the receiving end to be propagated back to the sender. Most notably, versions of git-push before this could not notice if the update hook on the receiving end refused to update the ref for its own policy reasons. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-26 08:18:37 +01:00
if (expect_status_report) {
if (receive_status(in))
ret = -4;
}
if (!new_refs && ret == 0)
fprintf(stderr, "Everything up-to-date\n");
Make git-send-pack exit with error when some refs couldn't be pushed out In case some refs couldn't be pushed out due to an error (mostly the not-a-proper-subset error), make git-send-pack exit with non-zero status after the push is over (that is, it still tries to push out the rest of the refs). [jc: I adjusted a test for this change.] Signed-off-by: Petr Baudis <pasky@suse.cz> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-14 01:45:40 +01:00
return ret;
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
}
Renaming push. This allows git-send-pack to push local refs to a destination repository under different names. Here is the name mapping rules for refs. * If there is no ref mapping on the command line: - if '--all' is specified, it is equivalent to specifying <local> ":" <local> for all the existing local refs on the command line - otherwise, it is equivalent to specifying <ref> ":" <ref> for all the refs that exist on both sides. * <name> is just a shorthand for <name> ":" <name> * <src> ":" <dst> push ref that matches <src> to ref that matches <dst>. - It is an error if <src> does not match exactly one of local refs. - It is an error if <dst> matches more than one remote refs. - If <dst> does not match any remote refs, either - it has to start with "refs/"; <dst> is used as the destination literally in this case. - <src> == <dst> and the ref that matched the <src> must not exist in the set of remote refs; the ref matched <src> locally is used as the name of the destination. For example, - "git-send-pack --all <remote>" works exactly as before; - "git-send-pack <remote> master:upstream" pushes local master to remote ref that matches "upstream". If there is no such ref, it is an error. - "git-send-pack <remote> master:refs/heads/upstream" pushes local master to remote refs/heads/upstream, even when refs/heads/upstream does not exist. - "git-send-pack <remote> master" into an empty remote repository pushes the local ref/heads/master to the remote ref/heads/master. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-04 01:35:29 +02:00
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
int main(int argc, char **argv)
{
int i, nr_heads = 0;
char *dest = NULL;
char **heads = NULL;
Slow but steady progress on git pack receive/send
2005-06-30 07:50:48 +02:00
int fd[2], ret;
pid_t pid;
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
Make networking commands to work from a subdirectory. These are whole-tree operations and there is not much point making them operable from within a subdirectory, but it is easy to do so, and using setup_git_directory() upfront helps git:// proxy specification picked up from the correct place. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-11-26 09:47:59 +01:00
setup_git_directory();
sha1_name: warning ambiguous refs. This makes sure that many commands that take refs on the command line to honor core.warnambiguousrefs configuration. Earlier, the commands affected by this patch did not read the configuration file. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-03-24 08:41:18 +01:00
git_config(git_default_config);
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
argv++;
git-send-pack: add "--all" option to send all refs to the other side This affects only refs that the other side doesn't already have. The ones it has are still filtered by the ref selection.
2005-07-16 22:26:33 +02:00
for (i = 1; i < argc; i++, argv++) {
char *arg = *argv;
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
if (*arg == '-') {
if (!strncmp(arg, "--exec=", 7)) {
exec = arg + 7;
continue;
}
git-send-pack: add "--all" option to send all refs to the other side This affects only refs that the other side doesn't already have. The ones it has are still filtered by the ref selection.
2005-07-16 22:26:33 +02:00
if (!strcmp(arg, "--all")) {
send_all = 1;
continue;
}
git-send-pack: verify that sender is a proper superset of receiver This should make sure that if you have multiple people pushing to the same tree, they cannot overwrite each others work, but have to merge before being able to update the common reference tree.
2005-07-19 13:03:47 +02:00
if (!strcmp(arg, "--force")) {
force_update = 1;
continue;
}
Make "git-send-pack" less verbose by default It used to make sense to have git-send-pack talk about the things it sent when (a) it was a new program and (b) nobody had a lot of tags and branches. These days, it's just distracting to see tons of 'refs/tags/xyz': up-to-date ... when updating a remote repo. So shut it up by default, and add a "--verbose" flag for those who really want to see it. Also, since this makes he case of everything being up-to-date just totally silent, make it say "Everything up-to-date" if no refs needed updating. Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-12-21 03:13:02 +01:00
if (!strcmp(arg, "--verbose")) {
verbose = 1;
continue;
}
send-pack --thin: use "thin pack" delta transfer. The new flag loosens the usual "self containedness" requirment of packfiles, and sends deltified representation of objects when we know the other side has the base objects needed to unpack them. This would help reducing the transfer size. Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-02-20 00:03:49 +01:00
if (!strcmp(arg, "--thin")) {
use_thin_pack = 1;
continue;
}
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
usage(send_pack_usage);
}
git-send-pack: add "--all" option to send all refs to the other side This affects only refs that the other side doesn't already have. The ones it has are still filtered by the ref selection.
2005-07-16 22:26:33 +02:00
if (!dest) {
dest = arg;
continue;
}
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
heads = argv;
git-send-pack: add "--all" option to send all refs to the other side This affects only refs that the other side doesn't already have. The ones it has are still filtered by the ref selection.
2005-07-16 22:26:33 +02:00
nr_heads = argc - i;
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
break;
}
if (!dest)
usage(send_pack_usage);
Make send-pack --all and explicit ref mutually exclusive. send-pack had a confusing misfeature that "send-pack --all master" updated all refs, while "send-pack --all" did not do anything. Make --all and explicit refs mutually exclusive, and make sure "send-pack --all" updates all refs. Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-08-02 21:20:27 +02:00
if (heads && send_all)
usage(send_pack_usage);
Factor out the ssh connection stuff from send-pack.c I want to use it for git-fetch-pack too.
2005-07-04 20:57:58 +02:00
pid = git_connect(fd, dest, exec);
Slow but steady progress on git pack receive/send
2005-06-30 07:50:48 +02:00
if (pid < 0)
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
return 1;
Do ref matching on the sender side rather than on receiver This makes the receiver always send a full list of valid refs, which will allow us to do better packs, as well as handle creation of new refs. Eventually. Right now we just moved the matching and enabled it. So now you can do git-send-pack host:path branch1 branch2 to only send branches "branch1" and "branch2".
2005-06-30 21:28:24 +02:00
ret = send_pack(fd[0], fd[1], nr_heads, heads);
Slow but steady progress on git pack receive/send
2005-06-30 07:50:48 +02:00
close(fd[0]);
close(fd[1]);
Test return value of finish_connect() Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
2006-09-13 10:26:47 +02:00
ret |= finish_connect(pid);
return !!ret;
Start of "git-send-pack", the local part of sending off a pack Like git-receive-pack, this is only partway done.
2005-06-30 04:09:05 +02:00
}
Copy permalink