diff --git a/contrib/continuous/cidaemon b/contrib/continuous/cidaemon deleted file mode 100644 index 4009a151de..0000000000 --- a/contrib/continuous/cidaemon +++ /dev/null @@ -1,503 +0,0 @@ -#!/usr/bin/perl -# -# A daemon that waits for update events sent by its companion -# post-receive-cinotify hook, checks out a new copy of source, -# compiles it, and emails the guilty parties if the compile -# (and optionally test suite) fails. -# -# To use this daemon, configure it and run it. It will disconnect -# from your terminal and fork into the background. The daemon must -# have local filesystem access to the source repositories, as it -# uses objects/info/alternates to avoid copying objects. -# -# Add its companion post-receive-cinotify hook as the post-receive -# hook to each repository that the daemon should monitor. Yes, a -# single daemon can monitor more than one repository. -# -# To use multiple daemons on the same system, give them each a -# unique queue file and tmpdir. -# -# Global Config -# ------------- -# Reads from a Git style configuration file. This will be -# ~/.gitconfig by default but can be overridden by setting -# the GIT_CONFIG_FILE environment variable before starting. -# -# cidaemon.smtpHost -# Hostname of the SMTP server the daemon will send email -# through. Defaults to 'localhost'. -# -# cidaemon.smtpUser -# Username to authenticate to the SMTP server as. This -# variable is optional; if it is not supplied then no -# authentication will be performed. -# -# cidaemon.smtpPassword -# Password to authenticate to the SMTP server as. This -# variable is optional. If not supplied but smtpUser was, -# the daemon prompts for the password before forking into -# the background. -# -# cidaemon.smtpAuth -# Type of authentication to perform with the SMTP server. -# If set to 'login' and smtpUser was defined, this will -# use the AUTH LOGIN command, which is suitable for use -# with at least one version of Microsoft Exchange Server. -# If not set the daemon will use whatever auth methods -# are supported by your version of Net::SMTP. -# -# cidaemon.email -# Email address that daemon generated emails will be sent -# from. This should be a useful email address within your -# organization. Required. -# -# cidaemon.name -# Human friendly name that the daemon will send emails as. -# Defaults to 'cidaemon'. -# -# cidaemon.scanDelay -# Number of seconds to sleep between polls of the queue file. -# Defaults to 60. -# -# cidaemon.recentCache -# Number of recent commit SHA-1s per repository to cache and -# skip building if they appear again. This is useful to avoid -# rebuilding the same commit multiple times just because it was -# pushed into more than one branch. Defaults to 100. -# -# cidaemon.tmpdir -# Scratch directory to create the builds within. The daemon -# makes a new subdirectory for each build, then deletes it when -# the build has finished. The pid file is also placed here. -# Defaults to '/tmp'. -# -# cidaemon.queue -# Path to the queue file that the post-receive-cinotify hook -# appends events to. This file is polled by the daemon. It -# must not be on an NFS mount (uses flock). Required. -# -# cidaemon.nocc -# Perl regex patterns to match against author and committer -# lines. If a pattern matches, that author or committer will -# not be notified of a build failure. -# -# Per Repository Config -# ---------------------- -# Read from the source repository's config file. -# -# builder.command -# Shell command to execute the build. This command must -# return 0 on "success" and non-zero on failure. If you -# also want to run a test suite, make sure your command -# does that too. Required. -# -# builder.queue -# Queue file to notify the cidaemon through. Should match -# cidaemon.queue. If not set the hook will not notify the -# cidaemon. -# -# builder.skip -# Perl regex patterns of refs that should not be sent to -# cidaemon. Updates of these refs will be ignored. -# -# builder.newBranchBase -# Glob patterns of refs that should be used to form the -# 'old' revions of a newly created ref. This should set -# to be globs that match your 'mainline' branches. This -# way a build failure of a brand new topic branch does not -# attempt to email everyone since the beginning of time; -# instead it only emails those authors of commits not in -# these 'mainline' branches. - -local $ENV{PATH} = join ':', qw( - /opt/git/bin - /usr/bin - /bin - ); - -use strict; -use warnings; -use FindBin qw($RealBin); -use File::Spec; -use lib File::Spec->catfile($RealBin, '..', 'perl5'); -use Storable qw(retrieve nstore); -use Fcntl ':flock'; -use POSIX qw(strftime); -use Getopt::Long qw(:config no_auto_abbrev auto_help); - -sub git_config ($;$) -{ - my $var = shift; - my $required = shift || 0; - local *GIT; - open GIT, '-|','git','config','--get',$var; - my $r = ; - chop $r if $r; - close GIT; - die "error: $var not set.\n" if ($required && !$r); - return $r; -} - -package EXCHANGE_NET_SMTP; - -# Microsoft Exchange Server requires an 'AUTH LOGIN' -# style of authentication. This is different from -# the default supported by Net::SMTP so we subclass -# and override the auth method to support that. - -use Net::SMTP; -use Net::Cmd; -use MIME::Base64 qw(encode_base64); -our @ISA = qw(Net::SMTP); -our $auth_type = ::git_config 'cidaemon.smtpAuth'; - -sub new -{ - my $self = shift; - my $type = ref($self) || $self; - $type->SUPER::new(@_); -} - -sub auth -{ - my $self = shift; - return $self->SUPER::auth(@_) unless $auth_type eq 'login'; - - my $user = encode_base64 shift, ''; - my $pass = encode_base64 shift, ''; - return 0 unless CMD_MORE == $self->command("AUTH LOGIN")->response; - return 0 unless CMD_MORE == $self->command($user)->response; - CMD_OK == $self->command($pass)->response; -} - -package main; - -my ($debug_flag, %recent); - -my $ex_host = git_config('cidaemon.smtpHost') || 'localhost'; -my $ex_user = git_config('cidaemon.smtpUser'); -my $ex_pass = git_config('cidaemon.smtpPassword'); - -my $ex_from_addr = git_config('cidaemon.email', 1); -my $ex_from_name = git_config('cidaemon.name') || 'cidaemon'; - -my $scan_delay = git_config('cidaemon.scanDelay') || 60; -my $recent_size = git_config('cidaemon.recentCache') || 100; -my $tmpdir = git_config('cidaemon.tmpdir') || '/tmp'; -my $queue_name = git_config('cidaemon.queue', 1); -my $queue_lock = "$queue_name.lock"; - -my @nocc_list; -open GIT,'git config --get-all cidaemon.nocc|'; -while () { - chop; - push @nocc_list, $_; -} -close GIT; - -sub nocc_author ($) -{ - local $_ = shift; - foreach my $pat (@nocc_list) { - return 1 if /$pat/; - } - 0; -} - -sub input_echo ($) -{ - my $prompt = shift; - - local $| = 1; - print $prompt; - my $input = ; - chop $input; - return $input; -} - -sub input_noecho ($) -{ - my $prompt = shift; - - my $end = sub {system('stty','echo');print "\n";exit}; - local $SIG{TERM} = $end; - local $SIG{INT} = $end; - system('stty','-echo'); - - local $| = 1; - print $prompt; - my $input = ; - system('stty','echo'); - print "\n"; - chop $input; - return $input; -} - -sub rfc2822_date () -{ - strftime("%a, %d %b %Y %H:%M:%S %Z", localtime); -} - -sub send_email ($$$) -{ - my ($subj, $body, $to) = @_; - my $now = rfc2822_date; - my $to_str = ''; - my @rcpt_to; - foreach (@$to) { - my $s = $_; - $s =~ s/^/"/; - $s =~ s/(\s+<)/"$1/; - $to_str .= ', ' if $to_str; - $to_str .= $s; - push @rcpt_to, $1 if $s =~ /<(.*)>/; - } - die "Nobody to send to.\n" unless @rcpt_to; - my $msg = < -To: $to_str -Date: $now -Subject: $subj - -$body -EOF - - my $smtp = EXCHANGE_NET_SMTP->new(Host => $ex_host) - or die "Cannot connect to $ex_host: $!\n"; - if ($ex_user && $ex_pass) { - $smtp->auth($ex_user,$ex_pass) - or die "$ex_host rejected $ex_user\n"; - } - $smtp->mail($ex_from_addr) - or die "$ex_host rejected $ex_from_addr\n"; - scalar($smtp->recipient(@rcpt_to, { SkipBad => 1 })) - or die "$ex_host did not accept any addresses.\n"; - $smtp->data($msg) - or die "$ex_host rejected message data\n"; - $smtp->quit; -} - -sub pop_queue () -{ - open LOCK, ">$queue_lock" or die "Can't open $queue_lock: $!"; - flock LOCK, LOCK_EX; - - my $queue = -f $queue_name ? retrieve $queue_name : []; - my $ent = shift @$queue; - nstore $queue, $queue_name; - - flock LOCK, LOCK_UN; - close LOCK; - $ent; -} - -sub git_exec (@) -{ - system('git',@_) == 0 or die "Cannot git " . join(' ', @_) . "\n"; -} - -sub git_val (@) -{ - open(C, '-|','git',@_); - my $r = ; - chop $r if $r; - close C; - $r; -} - -sub do_build ($$) -{ - my ($git_dir, $new) = @_; - - my $tmp = File::Spec->catfile($tmpdir, "builder$$"); - system('rm','-rf',$tmp) == 0 or die "Cannot clear $tmp\n"; - die "Cannot clear $tmp.\n" if -e $tmp; - - my $result = 1; - eval { - my $command; - { - local $ENV{GIT_DIR} = $git_dir; - $command = git_val 'config','builder.command'; - } - die "No builder.command for $git_dir.\n" unless $command; - - git_exec 'clone','-n','-l','-s',$git_dir,$tmp; - chmod 0700, $tmp or die "Cannot lock $tmp\n"; - chdir $tmp or die "Cannot enter $tmp\n"; - - git_exec 'update-ref','HEAD',$new; - git_exec 'read-tree','-m','-u','HEAD','HEAD'; - system $command; - if ($? == -1) { - print STDERR "failed to execute '$command': $!\n"; - $result = 1; - } elsif ($? & 127) { - my $sig = $? & 127; - print STDERR "'$command' died from signal $sig\n"; - $result = 1; - } else { - my $r = $? >> 8; - print STDERR "'$command' exited with $r\n" if $r; - $result = $r; - } - }; - if ($@) { - $result = 2; - print STDERR "$@\n"; - } - - chdir '/'; - system('rm','-rf',$tmp); - rmdir $tmp; - $result; -} - -sub build_failed ($$$$$) -{ - my ($git_dir, $ref, $old, $new, $msg) = @_; - - $git_dir =~ m,/([^/]+)$,; - my $repo_name = $1; - $ref =~ s,^refs/(heads|tags)/,,; - - my %authors; - my $shortlog; - my $revstr; - { - local $ENV{GIT_DIR} = $git_dir; - my @revs = ($new); - push @revs, '--not', @$old if @$old; - open LOG,'-|','git','rev-list','--pretty=raw',@revs; - while () { - if (s/^(author|committer) //) { - chomp; - s/>.*$/>/; - $authors{$_} = 1 unless nocc_author $_; - } - } - close LOG; - open LOG,'-|','git','shortlog',@revs; - $shortlog .= $_ while ; - close LOG; - $revstr = join(' ', @revs); - } - - my @to = sort keys %authors; - unless (@to) { - print STDERR "error: No authors in $revstr\n"; - return; - } - - my $subject = "[$repo_name] $ref : Build Failed"; - my $body = <&W'); - open(STDERR, '>&W'); - exit do_build $git_dir, $new; - } else { - close W; - my $out = ''; - $out .= $_ while ; - close R; - waitpid $builder, 0; - build_failed $git_dir, $ref, $old, $new, $out if $?; - } - - print "DONE\n\n" if $debug_flag; -} - -sub daemon_loop () -{ - my $run = 1; - my $stop_sub = sub {$run = 0}; - $SIG{HUP} = $stop_sub; - $SIG{INT} = $stop_sub; - $SIG{TERM} = $stop_sub; - - mkdir $tmpdir, 0755; - my $pidfile = File::Spec->catfile($tmpdir, "cidaemon.pid"); - open(O, ">$pidfile"); print O "$$\n"; close O; - - while ($run) { - my $ent = pop_queue; - if ($ent) { - my ($git_dir, $ref, $old, $new) = @$ent; - - $ent = $recent{$git_dir}; - $recent{$git_dir} = $ent = [[], {}] unless $ent; - my ($rec_arr, $rec_hash) = @$ent; - next if $rec_hash->{$new}++; - while (@$rec_arr >= $recent_size) { - my $to_kill = shift @$rec_arr; - delete $rec_hash->{$to_kill}; - } - push @$rec_arr, $new; - - run_build $git_dir, $ref, $old, $new; - } else { - sleep $scan_delay; - } - } - - unlink $pidfile; -} - -$debug_flag = 0; -GetOptions( - 'debug|d' => \$debug_flag, - 'smtp-user=s' => \$ex_user, -) or die "usage: $0 [--debug] [--smtp-user=user]\n"; - -$ex_pass = input_noecho("$ex_user SMTP password: ") - if ($ex_user && !$ex_pass); - -if ($debug_flag) { - daemon_loop; - exit 0; -} - -my $daemon = fork(); -if (!defined $daemon) { - die "cannot fork daemon: $!"; -} elsif (0 == $daemon) { - close STDIN;open(STDIN, '/dev/null'); - close STDOUT;open(STDOUT, '>/dev/null'); - close STDERR;open(STDERR, '>/dev/null'); - daemon_loop; - exit 0; -} else { - print "Daemon $daemon running in the background.\n"; -} diff --git a/contrib/continuous/post-receive-cinotify b/contrib/continuous/post-receive-cinotify deleted file mode 100644 index b8f5a609af..0000000000 --- a/contrib/continuous/post-receive-cinotify +++ /dev/null @@ -1,104 +0,0 @@ -#!/usr/bin/perl -# -# A hook that notifies its companion cidaemon through a simple -# queue file that a ref has been updated via a push (actually -# by a receive-pack running on the server). -# -# See cidaemon for per-repository configuration details. -# -# To use this hook, add it as the post-receive hook, make it -# executable, and set its configuration options. -# - -local $ENV{PATH} = '/opt/git/bin'; - -use strict; -use warnings; -use File::Spec; -use Storable qw(retrieve nstore); -use Fcntl ':flock'; - -my $git_dir = File::Spec->rel2abs($ENV{GIT_DIR}); -my $queue_name = `git config --get builder.queue`;chop $queue_name; -$queue_name =~ m,^([^\s]+)$,; $queue_name = $1; # untaint -unless ($queue_name) { - 1 while ; - print STDERR "\nerror: builder.queue not set. Not enqueing.\n\n"; - exit; -} -my $queue_lock = "$queue_name.lock"; - -my @skip; -open S, "git config --get-all builder.skip|"; -while () { - chop; - push @skip, $_; -} -close S; - -my @new_branch_base; -open S, "git config --get-all builder.newBranchBase|"; -while () { - chop; - push @new_branch_base, $_; -} -close S; - -sub skip ($) -{ - local $_ = shift; - foreach my $p (@skip) { - return 1 if /^$p/; - } - 0; -} - -open LOCK, ">$queue_lock" or die "Can't open $queue_lock: $!"; -flock LOCK, LOCK_EX; - -my $queue = -f $queue_name ? retrieve $queue_name : []; -my %existing; -foreach my $r (@$queue) { - my ($gd, $ref) = @$r; - $existing{$gd}{$ref} = $r; -} - -my @new_branch_commits; -my $loaded_new_branch_commits = 0; - -while () { - chop; - my ($old, $new, $ref) = split / /, $_, 3; - - next if $old eq $new; - next if $new =~ /^0{40}$/; - next if skip $ref; - - my $r = $existing{$git_dir}{$ref}; - if ($r) { - $r->[3] = $new; - } else { - if ($old =~ /^0{40}$/) { - if (!$loaded_new_branch_commits && @new_branch_base) { - open M,'-|','git','show-ref',@new_branch_base; - while () { - ($_) = split / /, $_; - push @new_branch_commits, $_; - } - close M; - $loaded_new_branch_commits = 1; - } - $old = [@new_branch_commits]; - } else { - $old = [$old]; - } - - $r = [$git_dir, $ref, $old, $new]; - $existing{$git_dir}{$ref} = $r; - push @$queue, $r; - } -} -nstore $queue, $queue_name; - -flock LOCK, LOCK_UN; -close LOCK; diff --git a/contrib/patches/docbook-xsl-manpages-charmap.patch b/contrib/patches/docbook-xsl-manpages-charmap.patch deleted file mode 100644 index f2b08b4f4a..0000000000 --- a/contrib/patches/docbook-xsl-manpages-charmap.patch +++ /dev/null @@ -1,21 +0,0 @@ -From: Ismail Dönmez - -Trying to build the documentation with docbook-xsl 1.73 may result in -the following error. This patch fixes it. - -$ xmlto -m callouts.xsl man git-add.xml -runtime error: file -file:///usr/share/sgml/docbook/xsl-stylesheets-1.73.0/manpages/other.xsl line -129 element call-template -The called template 'read-character-map' was not found. - ---- docbook-xsl-1.73.0/manpages/docbook.xsl.manpages-charmap 2007-07-23 16:24:23.000000000 +0100 -+++ docbook-xsl-1.73.0/manpages/docbook.xsl 2007-07-23 16:25:16.000000000 +0100 -@@ -37,6 +37,7 @@ - - - -+ - - -