Make "git grep" and "git show" pay attention to --textconv when
dealing with blob objects.
* mg/more-textconv:
grep: honor --textconv for the case rev:path
grep: allow to use textconv filters
t7008: demonstrate behavior of grep with textconv
cat-file: do not die on --textconv without textconv filters
show: honor --textconv for blobs
diff_opt: track whether flags have been set explicitly
t4030: demonstrate behavior of show with textconv
hashtable_index() appears to be a close duplicate of hash_obj().
Keep only the later and make it usable for all cases.
Also remove the modulus as this is an expensive operation.
The size argument is always a power of 2 anyway, so a simple
mask operation provides the same result.
On a 'git rev-list --all --objects' run this decreased the time spent
in lookup_object from 27.5% to 24.1%.
[jc: with a few comments on "modulus turned into mask" by Peff]
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we exit early in the function parse_object_buffer, we did not
write to *eaten_p. Then the calling function parse_object, which looks
like the following with respect to the eaten variable, cannot rely on a
proper value set in eaten, hence the freeing of the buffer depends
on random values in memory.
struct object *parse_object(const unsigned char *sha1)
{
int eaten;
...
obj = parse_object_buffer(sha1, type, size, buffer, &eaten);
if (!eaten)
free(buffer);
}
This change makes sure, the buffer freeing condition is deterministic.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Define memory ownership and lifetime rules for what for-each-ref
feeds to its callbacks (in short, "you do not own it, so make a
copy if you want to keep it").
* mh/reflife: (25 commits)
refs: document the lifetime of the args passed to each_ref_fn
register_ref(): make a copy of the bad reference SHA-1
exclude_existing(): set existing_refs.strdup_strings
string_list_add_refs_by_glob(): add a comment about memory management
string_list_add_one_ref(): rename first parameter to "refname"
show_head_ref(): rename first parameter to "refname"
show_head_ref(): do not shadow name of argument
add_existing(): do not retain a reference to sha1
do_fetch(): clean up existing_refs before exiting
do_fetch(): reduce scope of peer_item
object_array_entry: fix memory handling of the name field
find_first_merges(): remove unnecessary code
find_first_merges(): initialize merges variable using initializer
fsck: don't put a void*-shaped peg in a char*-shaped hole
object_array_remove_duplicates(): rewrite to reduce copying
revision: use object_array_filter() in implementation of gc_boundary()
object_array: add function object_array_filter()
revision: split some overly-long lines
cmd_diff(): make it obvious which cases are exclusive of each other
cmd_diff(): rename local variable "list" -> "entry"
...
Previously, the memory management of the object_array_entry::name
field was inconsistent and undocumented. object_array_entries are
ultimately created by a single function, add_object_array_with_mode(),
which has an argument "const char *name". This function used to
simply set the name field to reference the string pointed to by the
name parameter, and nobody on the object_array side ever freed the
memory. Thus, it assumed that the memory for the name field would be
managed by the caller, and that the lifetime of that string would be
at least as long as the lifetime of the object_array_entry. But
callers were inconsistent:
* Some passed pointers to constant strings or argv entries, which was
OK.
* Some passed pointers to newly-allocated memory, but didn't arrange
for the memory ever to be freed.
* Some passed the return value of sha1_to_hex(), which is a pointer to
a statically-allocated buffer that can be overwritten at any time.
* Some passed pointers to refnames that they received from a
for_each_ref()-type iteration, but the lifetimes of such refnames is
not guaranteed by the refs API.
Bring consistency to this mess by changing object_array to make its
own copy for the object_array_entry::name field and free this memory
when an object_array_entry is deleted from the array.
Many callers were passing the empty string as the name parameter, so
as a performance optimization, treat the empty string specially.
Instead of making a copy, store a pointer to a statically-allocated
empty string to object_array_entry::name. When deleting such an
entry, skip the free().
Change the callers that were already passing copies to
add_object_array_with_mode() to either skip the copy, or (if the
memory needed to be allocated anyway) freeing the memory itself.
A part of this commit effectively reverts
70d26c6e76 read_revisions_from_stdin: make copies for handle_revision_arg
because the copying introduced by that commit (which is still
necessary) is now done at a deeper level.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Optimizes object lookup when the object hashtable starts to become
crowded.
* jk/lookup-object-prefer-latest:
lookup_object: prioritize recently found objects
The old version copied one entry to its destination position, then
deleted any matching entries from the tail of the array. This
required the tail of the array to be copied multiple times. It didn't
affect the complexity of the algorithm because the whole tail has to
be searched through anyway. But all the copying was unnecessary.
Instead, check for the existence of an entry with the same name in the
*head* of the list before copying an entry to its final position.
This way each entry has to be copied at most one time.
Extract a helper function contains_name() to do a bit of the work.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function that allows unwanted entries in an object_array to be
removed. This encapsulation is a step towards giving object_array
ownership of its entries' name memory.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "grep" honor the "--textconv" option also for the object case, i.e.
when used with an argument "rev:path".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The lookup_object function is backed by a hash table of all
objects we have seen in the program. We manage collisions
with a linear walk over the colliding entries, checking each
with hashcmp(). The main cost of lookup is in these
hashcmp() calls; finding our item in the first slot is
cheaper than finding it in the second slot, which is cheaper
than the third, and so on.
If we assume that there is some locality to the object
lookups (e.g., if X and Y collide, and we have just looked
up X, the next lookup is more likely to be for X than for
Y), then we can improve our average lookup speed by checking
X before Y.
This patch does so by swapping a found item to the front of
the collision chain. The p0001 perf test reveals that this
does indeed exploit locality in the case of "rev-list --all
--objects":
Test origin this tree
-------------------------------------------------------------------------
0001.1: rev-list --all 0.40(0.38+0.02) 0.40(0.36+0.03) +0.0%
0001.2: rev-list --all --objects 2.24(2.17+0.05) 1.86(1.79+0.05) -17.0%
This is not surprising, as the full object traversal will
hit the same tree entries over and over (e.g., for every
commit that doesn't change "Documentation/", we will have to
look up the same sha1 just to find out that we already
processed it).
The reason why this technique works (and does not violate
any properties of the hash table) is subtle and bears some
explanation. Let's imagine we get a lookup for sha1 `X`, and
it hashes to bucket `i` in our table. That stretch of the
table may look like:
index | i-1 | i | i+1 | i+2 |
-----------------------------------
entry ... | A | B | C | X | ...
-----------------------------------
We start our probe at i, see that B does not match, nor does
C, and finally find X. There may be multiple C's in the
middle, but we know that there are no empty slots (or else
we would not find X at all).
We do not know the original index of B; it may be `i`, or it
may be less than i (e.g., if it were `i-1`, it would collide
with A and spill over into the `i` bucket). So it is
acceptable for us to move it to the right of a contiguous
stretch of entries (because we will find it from a linear
walk starting anywhere at `i` or before), but never to the
left (if we moved it to `i-1`, we would miss it when
starting our walk at `i`).
We do know the original index of X; it is `i`, so it is safe
to place it anywhere in the contiguous stretch between `i`
and where we found it (`i+2` in the this case).
This patch does a pure swap; after finding X in the
situation above, we would end with:
index | i-1 | i | i+1 | i+2 |
-----------------------------------
entry ... | A | X | C | B | ...
-----------------------------------
We could instead bump X into the `i` slot, and then shift
the whole contiguous chain down by one, resulting in:
index | i-1 | i | i+1 | i+2 |
-----------------------------------
entry ... | A | X | B | C | ...
-----------------------------------
That puts our chain in true most-recently-used order.
However, experiments show that it is not any faster (and in
fact, is slightly slower due to the extra manipulation).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many call-sites of parse_object assume that they will get a
non-NULL return value; this is not the case if we encounter
an error while parsing the object.
This patch adds a wrapper function around parse_object that
handles dying automatically, and uses it anywhere we
immediately try to access the return value as a non-NULL
pointer (i.e., anywhere that we would currently segfault).
This wrapper may also be useful in other places. The most
obvious one is code like:
o = parse_object(sha1);
if (!o)
die(...);
However, these should not be mechanically converted to
parse_object_or_die, as the die message is sometimes
customized. Later patches can address these sites on a
case-by-case basis.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error handling routines add a newline. Remove
the duplicate ones in error messages.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, all the callers of check_sha1_signature() first
called read_sha1_file() to prepare the whole object data in core,
and called this function. The function is used to revalidate what
we read from the object database actually matches the object name we
used to ask for the data from the object database.
Update the API to allow callers to pass NULL as the object data, and
have the function read and hash the object data using streaming API
to recompute the object name, without having to hold everything in
core at the same time. This is most useful in parse_object() that
parses a blob object, because this caller does not have to keep the
actual blob data around in memory after a "struct blob" is returned.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parse_object is called, we do the following:
1. read the object data into a buffer via read_sha1_file
2. call parse_object_buffer, which then:
a. calls the appropriate lookup_{commit,tree,blob,tag}
to either create a new "struct object", or to find
an existing one. We know the appropriate type from
the lookup in step 1.
b. calls the appropriate parse_{commit,tree,blob,tag}
to parse the buffer for the new (or existing) object
In step 2b, all of the called functions are no-ops for
object "X" if "X->object.parsed" is set. I.e., when we have
already parsed an object, we end up going to a lot of work
just to find out at a low level that there is nothing left
for us to do (and we throw away the data from read_sha1_file
unread).
We can optimize this by moving the check for "do we have an
in-memory object" from 2a before the expensive call to
read_sha1_file in step 1.
This might seem circular, since step 2a uses the type
information determined in step 1 to call the appropriate
lookup function. However, we can notice that all of the
lookup_* functions are backed by lookup_object. In other
words, all of the objects are kept in a master hash table,
and we don't actually need the type to do the "do we have
it" part of the lookup, only to do the "and create it if it
doesn't exist" part.
This can save time whenever we call parse_object on the same
sha1 twice in a single program. Some code paths already
perform this optimization manually, with either:
if (!obj->parsed)
obj = parse_object(obj->sha1);
if you already have a "struct object", or:
struct object *obj = lookup_unknown_object(sha1);
if (!obj || !obj->parsed)
obj = parse_object(sha1);
if you don't. This patch moves the optimization into
parse_object itself.
Most git operations won't notice any impact. Either they
don't parse a lot of duplicate sha1s, or the calling code
takes special care not to re-parse objects. I timed two
code paths that do benefit (there may be more, but these two
were immediately obvious and easy to time).
The first is fast-export, which calls parse_object on each
object it outputs, like this:
object = parse_object(sha1);
if (!object)
die(...);
if (object->flags & SHOWN)
return;
which means that just to realize we have already shown an
object, we will read the whole object from disk!
With this patch, my best-of-five time for "fast-export --all" on
git.git dropped from 26.3s to 21.3s.
The second case is upload-pack, which will call parse_object
for each advertised ref (because it needs to peel tags to
show "^{}" entries). This doesn't matter for most
repositories, because they don't have a lot of refs pointing
to the same objects. However, if you have a big alternates
repository with a shared object db for a number of child
repositories, then the alternates repository will have
duplicated refs representing each of its children.
For example, GitHub's alternates repository for git.git has
~120,000 refs, of which only ~3200 are unique. The time for
upload-pack to print its list of advertised refs dropped
from 3.4s to 0.76s.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack & fetch-pack are run and store the pack obtained over
the wire to a local repository, they internally run the index-pack command
with the --strict option. Make sure that we reject incoming packfile that
records objects twice to avoid spreading such a damage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callers want to silently get a replacement object, and they do not
care what the real name of the replacement object is. Worse yet, no sane
interface to return the underlying object without replacement is provided.
Remove the function and make only the few callers that want the name of
the replacement object find it themselves.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change some expanded tabs (spaces) to tabs in object.c.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 0e87c36 (object: call "check_sha1_signature" with the
replacement sha1) changed the first argument passed to
parse_object_buffer() from "sha1" to "repl". With that change,
the returned obj pointer has the replacement SHA1 in obj->sha1,
not the original one.
But when using lookup_commit() and then parse_commit() on a
commit, we get an object pointer with the original sha1, but
the commit content comes from the replacement commit.
So the result we get from using parse_object() is different
from the we get from using lookup_commit() followed by
parse_commit().
It looks much simpler and safer to fix this inconsistency by
passing "sha1" to parse_object_bufer() instead of "repl".
The commit comment should be used to tell the the replacement
commit is replacing another commit and why. So it should be
easy to see that we have a replacement commit instead of an
original one.
And it is not a problem if the content of the commit is not
consistent with the sha1 as cat-file piped to hash-object can
be used to see the difference.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When passed an empty list, objects_array_remove_duplicates() corrupts it
by changing the number of entries from 0 to 1.
The problem lies in the condition of its main loop:
for (ref = 0; ref < array->nr - 1; ref++) {
The loop body manipulates the supplied object array. In the case of an
empty array, it should not be doing anything at all. But array->nr is an
unsigned quantity, so the code enters the loop, in particular increasing
array->nr. Fix this by comparing (ref + 1 < array->nr) instead.
This bug can be triggered by git bundle --stdin:
$ echo HEAD | git bundle create some.bundle --stdin’
Segmentation fault (core dumped)
The list of commits to bundle appears to be empty because of another bug:
by the time the revision-walking machinery gets to look at it, standard
input has already been consumed by rev-list, so this function gets an
empty list of revisions.
After this patch, git bundle --stdin still does not work; it just doesn’t
segfault any more.
Reported-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we get a "sha1 mismatch" error for replaced objects.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our hash_obj and hashtable_index calls and functions were doing a lot of
funny things with signedness. Unify all of it to 'unsigned int'.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In these two places we are casting part of our unsigned char sha1 array into
an unsigned int, which violates GCCs strict-aliasing rules (and probably
other compilers).
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git bundle create x master master" used to create a bundle that lists
the same branch (master) twice. Cloning from such a bundle resulted in
a needless warning "warning: Duplicated ref: refs/remotes/origin/master".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of an malformed object, the object specific parsing functions
would return an error, which is currently ignored. The object can be partial
initialized in this case.
This patch make parse_object_buffer propagate such errors.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead, signal the error just like the case we do upon encountering
an object with an unknown type.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When scanning the trees in track_tree_refs() there is a "lazy" test
that assumes that entries are either directories or files. Don't do
that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When check_sha1_signature fails, program is not terminated:
it prints an error message and returns NULL, so the
buffer returned by read_sha1_file should be freed before.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Each object in struct object_array is extended with the mode.
If not specified, S_IFINVALID is used. An object with an mode value
can be added with add_object_array_with_mode.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces the fairly odd "created_object()" function that did _most_
of the object setup with a more complete "create_object()" function that
also has a more natural calling convention.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to use a different allocator scheme for when we didn't know the
object type. That meant that objects that were created without any
up-front knowledge of the type would not go through the same allocation
paths as normal object allocations, and would miss out on the statistics.
But perhaps more importantly than the statistics (that are useful when
looking at memory usage but not much else), if we want to make the
object hash tables use a denser object pointer representation, we need
to make sure that they all go through the same blocking allocator.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Looking at the SHA1 validation code due to the corruption that Alexander
Litvinov is seeing under Cygwin, I notice that one of the most central
places where we read objects, we actually do end up verifying the SHA1 of
the result, but then we happily parse it anyway.
And using "printf" to write the error message means that it not only can
get lost, but will actually mess up stdout, and cause other strange and
hard-to-debug failures downstream.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This function is called only once in the whole source tree. Let's move
its code inline instead, which is also in the spirit of removing as much
object type char arrays as possible (not that this patch does anything for
that but at least it is now a local matter).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We currently have two parallel notation for dealing with object types
in the code: a string and a numerical value. One of them is obviously
redundent, and the most used one requires more stack space and a bunch
of strcmp() all over the place.
This is an initial step for the removal of the version using a char array
found in object reading code paths. The patch is unfortunately large but
there is no sane way to split it in smaller parts without breaking the
system.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometime typename() is used, sometimes type_names[] is accessed directly.
Let's enforce typename() all the time which allows for validating the
type.
Also let's add a function to go from a name to a type and use it instead
of manual memcpy() when appropriate.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a new command, git-for-each-ref. You can have it iterate
over refs and have it output various aspects of the objects they
refer to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This IMNSHO cleans up the object hashing.
The hash expansion is separated out into a function of its own, the hash
array (and size) names are made more obvious, and the code is generally
made to look a bit more like the object-ref hashing.
It also gets rid of "find_object()" returning an index (or negative
position if no object is found), since that is made redundant by the
simplified object rehashing. The basic operation is now "lookup_object()"
which just returns the object itself.
There's an almost unmeasurable speed increase, but more importantly, I
think the end result is more readable.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There are a few special places where some programs accessed the object
hash array directly, which bothered me because I wanted to play with some
simple re-organizations.
So this patch makes the object hash array data structures all entirely
local to object.c, and the few users who wanted to look at it now get to
use a function to query how many object index entries there can be, and to
actually access the array.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
