The status report from "git fetch", when messages like 'up-to-date'
are translated, did not align the branch names well.
* nd/fetch-status-alignment:
fetch: align per-ref summary report in UTF-8 locales
fetch does printf("%-*s", width, "foo") where "foo" can be a utf-8
string, but width is in bytes, not columns. For ASCII it's fine as one
byte takes one column. For utf-8, this may result in misaligned ref
summary table.
Introduce gettext_width() function that returns the string length in
columns (currently only supports utf-8 locales). Make the code use
TRANSPORT_SUMMARY(x) where the length is compensated properly in
non-English locales.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
Use argv-array API in "git fetch" implementation.
* jk/argv-array:
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
Optimise the "merge-base" computation a bit, and also update its
users that do not need the full merge-base information to call a
cheaper subset.
* jc/merge-bases:
reduce_heads(): reimplement on top of remove_redundant()
merge-base: "--is-ancestor A B"
get_merge_bases_many(): walk from many tips in parallel
in_merge_bases(): use paint_down_to_common()
merge_bases_many(): split out the logic to paint history
in_merge_bases(): omit unnecessary redundant common ancestor reduction
http-push: use in_merge_bases() for fast-forward check
receive-pack: use in_merge_bases() for fast-forward check
in_merge_bases(): support only one "other" commit
When fetch is invoked with --all, we need to pass the tag-following
preference to each individual fetch; without this, we will always
auto-follow tags, preventing us from fetching the remote tags into a
remote-specific namespace, for example.
Reported-by: Oswald Buddenhagen <ossi@kde.org>
Signed-off-by: Dan Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch_populated_submodules() allocates the full argv array it uses to
recurse into the submodules from the number of given options plus the six
argv values it is going to add. It then initializes it with those values
which won't change during the iteration and copies the given options into
it. Inside the loop the two argv values different for each submodule get
replaced with those currently valid.
However, this technique is brittle and error-prone (as the comment to
explain the magic number 6 indicates), so let's replace it with an
argv_array. Instead of replacing the argv values, push them to the
argv_array just before the run_command() call (including the option
separating them) and pop them from the argv_array right after that.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fetch invokes itself recursively when recursing into
submodules or handling "fetch --multiple". In both cases, it
builds the child's command line by pushing options onto a
statically-sized array. In both cases, the array is
currently just big enough to handle the largest possible
case. However, this technique is brittle and error-prone, so
let's replace it with a dynamic argv_array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In early days of its life, I planned to make it possible to compute
"is a commit contained in all of these other commits?" with this
function, but it turned out that no caller needed it.
Just make it take two commit objects and add a comment to say what
these two functions do.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
More message strings marked for i18n.
By Nguyễn Thái Ngọc Duy (10) and Jonathan Nieder (1)
* nd/i18n:
help: replace underlining "help -a" headers using hyphens with a blank line
i18n: bundle: mark strings for translation
i18n: index-pack: mark strings for translation
i18n: apply: update say_patch_name to give translators complete sentence
i18n: apply: mark strings for translation
i18n: remote: mark strings for translation
i18n: make warn_dangling_symref() automatically append \n
i18n: help: mark strings for translation
i18n: mark relative dates for translation
strbuf: convenience format functions with \n automatically appended
Makefile: feed all header files to xgettext
The report from "git fetch" said "new branch" even for a non branch
ref.
By Marc Branchaud
* mb/fetch-call-a-non-branch-a-ref:
fetch: describe new refs based on where it came from
fetch: Give remote_ref to update_local_ref() as well
This helps remove \n from translatable strings
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" that recurses into submodules on demand did not check if
it needs to go into submodules when non branches (most notably, tags)
are fetched.
By Jens Lehmann
* jl/maint-submodule-recurse-fetch:
submodules: recursive fetch also checks new tags for submodule commits
update_local_ref() used to say "[new branch]" when we stored a new ref
outside refs/tags/ hierarchy, but the message is more about what we
fetched, so use the refname at the origin to make that decision.
Also, only call a new ref a "branch" if it's under refs/heads/.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way, the function can look at the remote side to adjust the
informational message it gives.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 88a21979c (fetch/pull: recurse into submodules when necessary) all
fetched commits are examined if they contain submodule changes (unless
configuration or command line options inhibit that). If a newly recorded
submodule commit is not present in the submodule, a fetch is run inside
it to download that commit.
Checking new refs was done in an else branch where it wasn't executed for
tags. This normally isn't a problem because tags are only fetched with
the branches they live on, then checking the new commits in the fetched
branches for submodule commits will also process all tags. But when a
specific tag is fetched (or the refspec contains refs/tags/) commits only
reachable by tags won't be searched for submodule commits, which is a bug.
Fix that by moving the code outside the if/else construct to handle new
tags just like any other ref. The performance impact of adding tags that
most of the time lie on a branch which is checked anyway for new submodule
commit should be minimal, as since 6859de4 (fetch: avoid quadratic loop
checking for updated submodules) all ref-tips are collected first and then
fed to a single rev-list.
Spotted-by: Jeff King <peff@peff.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, progress output is disabled if stderr is not a terminal.
The --progress option can be used to force progress output anyways.
Conversely, --no-progress does not force progress output. In particular,
if stderr is a terminal, progress output is enabled.
This is unintuitive. Change --no-progress to force output off.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason why the trailing slash is needed is obvious. refs/stash and
HEAD are not namespace, but complete refs. Do full string compare on them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FETCH_HEAD refname is supposed to refer to the ref that was fetched
and should be merged. However all fetched refs are written to
.git/FETCH_HEAD in an arbitrary order, and resolve_ref_unsafe simply
takes the first ref as the FETCH_HEAD, which is often the wrong one,
when other branches were also fetched.
The solution is to write the for-merge ref(s) to FETCH_HEAD first.
Then, unless --append is used, the FETCH_HEAD refname behaves as intended.
If the user uses --append, they presumably are doing so in order to
preserve the old FETCH_HEAD.
While we are at it, update an old example in the read-tree documentation
that implied that each entry in FETCH_HEAD only has the object name, which
is not true for quite a while.
[jc: adjusted tests]
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.7.7:
Git 1.7.7.5
Git 1.7.6.5
blame: don't overflow time buffer
fetch: create status table using strbuf
checkout,merge: loosen overwriting untracked file check based on info/exclude
cast variable in call to free() in builtin/diff.c and submodule.c
apply: get rid of useless x < 0 comparison on a size_t type
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
builtin/fetch.c
When we fetch from a remote, we print a status table like:
From url
* [new branch] foo -> origin/foo
We create this table in a static buffer using sprintf. If
the remote refnames are long, they can overflow this buffer
and smash the stack.
Instead, let's use a strbuf to build the string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
We do not want to record tags as parents of a merge when the user does
"git pull $there tag v1.0" to merge tagged commit, but that is not a good
enough excuse to peel the tag down to commit when storing in FETCH_HEAD.
The caller of underlying "git fetch $there tag v1.0" may have other uses
of information contained in v1.0 tag in mind.
[jc: the test adjustment is to update for the new expectation]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cn/fetch-prune:
fetch: treat --tags like refs/tags/*:refs/tags/* when pruning
fetch: honor the user-provided refspecs when pruning refs
remote: separate out the remote_find_tracking logic into query_refspecs
t5510: add tests for fetch --prune
fetch: free all the additional refspecs
Conflicts:
remote.c
If --tags is specified, add that refspec to the list given to
prune_refs so it knows to treat it as a filter on what refs to
should consider for prunning. This way
git fetch --prune --tags origin
only prunes tags and doesn't delete the branch refs.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gave us refspecs on the command line, we should use those
when deciding whether to prune a ref instead of relying on the
refspecs in the config.
Previously, running
git fetch --prune origin refs/heads/master:refs/remotes/origin/master
would delete every other ref under the origin namespace because we
were using the refspec to filter the available refs but using the
configured refspec to figure out if a ref had been deleted on the
remote. This is clearly the wrong thing to do.
Change prune_refs and get_stale_heads to simply accept a list of
references and a list of refspecs. The caller of either function needs
to decide what refspecs should be used to decide whether a ref is
stale.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Close FETCH_HEAD and release the string url even if we have to leave the
function store_updated_refs() early.
Reported-by: Chris Wilson <cwilson@vigilantsw.com>
Helped-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/receive-verify:
receive-pack: check connectivity before concluding "git push"
check_everything_connected(): libify
check_everything_connected(): refactor to use an iterator
fetch: verify we have everything we need before updating our ref
Conflicts:
builtin/fetch.c
* jc/fetch-verify:
fetch: verify we have everything we need before updating our ref
rev-list --verify-object
list-objects: pass callback data to show_objects()
Extract the helper function and the type definition of the iterator
function it uses out of builtin/fetch.c into a separate source and a
header file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will be using the same "rev-list --verify-objects" logic to add a
sanity check to the receiving end of "git push" in the same way, but the
list of commits that are checked come from a structure with a different
shape over there.
Update the function to take an iterator to make it easier to reuse it in
different contexts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git fetch" command works in two phases. The remote side tells us what
objects are at the tip of the refs we are fetching from, and transfers the
objects missing from our side. After storing the objects in our repository,
we update our remote tracking branches to point at the updated tips of the
refs.
A broken or malicious remote side could send a perfectly well-formed pack
data during the object transfer phase, but there is no guarantee that the
given data actually fill the gap between the objects we originally had and
the refs we are updating to.
Although this kind of breakage can be caught by running fsck after a
fetch, it is much cheaper to verify that everything that is reachable from
the tips of the refs we fetched are indeed fully connected to the tips of
our current set of refs before we update them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes no sense to do the - possibly very expensive - call to "rev-list
<new-ref-sha1> --not --all" in check_for_new_submodule_commits() when
there aren't any submodules configured.
Leave check_for_new_submodule_commits() early when no name <-> path
mappings for submodules are found in the configuration. To make that work
reading the configuration had to be moved further up in cmd_fetch(), as
doing that after the actual fetch of the superproject was too late.
Reported-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git fetch" command works in two phases. The remote side tells us what
objects are at the tip of the refs we are fetching from, and transfers the
objects missing from our side. After storing the objects in our repository,
we update our remote tracking branches to point at the updated tips of the
refs.
A broken or malicious remote side could send a perfectly well-formed pack
data during the object transfer phase, but there is no guarantee that the
given data actually fill the gap between the objects we originally had and
the refs we are updating to.
Although this kind of breakage can be caught by running fsck after a
fetch, it is much cheaper to verify that everything that is reachable from
the tips of the refs we fetched are indeed fully connected to the tips of
our current set of refs before we update them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-fetch-on-demand:
fetch/pull: Describe --recurse-submodule restrictions in the BUGS section
submodule update: Don't fetch when the submodule commit is already present
fetch/pull: Don't recurse into a submodule when commits are already present
Submodules: Add 'on-demand' value for the 'fetchRecurseSubmodule' option
config: teach the fetch.recurseSubmodules option the 'on-demand' value
fetch/pull: Add the 'on-demand' value to the --recurse-submodules option
fetch/pull: recurse into submodules when necessary
Conflicts:
builtin/fetch.c
submodule.c
* jk/trace-sifter:
trace: give repo_setup trace its own key
add packet tracing debug code
trace: add trace_strbuf
trace: factor out "do we want to trace" logic
trace: refactor to support multiple env variables
trace: add trace_vprintf
Split up the "(non-fast-forward)" message from printf directives and
make it translatable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate a "[rejected]" message spotted by Jeff King, and other
things in update_local_ref along with it.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate some of the formatting messages that appear on git-fetch
showing how branches/tags etc. were updated.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now the --recurse-submodules option could only be used to either
fetch all populated submodules recursively or to disable recursion
completely. As fetch and pull now by default just fetch those submodules
for which new commits have been fetched in the superproject, a command
line option to enforce that behavior is needed to be able to override
configuration settings.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To be able to access all commits of populated submodules referenced by the
superproject it is sufficient to only then let "git fetch" recurse into a
submodule when the new commits fetched in the superproject record new
commits for it. Having these commits present is extremely useful when
using the "--submodule" option to "git diff" (which is what "git gui" and
"gitk" do since 1.6.6), as all submodule commits needed for creating a
descriptive output can be accessed. Also merging submodule commits (added
in 1.7.3) depends on the submodule commits in question being present to
work. Last but not least this enables disconnected operation when using
submodules, as all commits necessary for a successful "git submodule
update -N" will have been fetched automatically. So we choose this mode as
the default for fetch and pull.
Before a new or changed ref from upstream is updated in update_local_ref()
"git rev-list <new-sha1> --not --branches --remotes" is used to determine
all newly fetched commits. These are then walked and diffed against their
parent(s) to see if a submodule has been changed. If that is the case, its
path is stored to be fetched after the superproject fetch is completed.
Using the "--recurse-submodules" or the "--no-recurse-submodules" option
disables the examination of the fetched refs because the result will be
ignored anyway.
There is currently no infrastructure for storing deleted and new
submodules in the .git directory of the superproject. That's why fetch and
pull for now only fetch submodules that are already checked out and are
not renamed.
In t7403 the "--no-recurse-submodules" argument had to be added to "git
pull" to avoid failure because of the moved upstream submodule repo.
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shows a trace of all packets coming in or out of a given
program. This can help with debugging object negotiation or
other protocol issues.
To keep the code changes simple, we operate at the lowest
level, meaning we don't necessarily understand what's in the
packets. The one exception is a packet starting with "PACK",
which causes us to skip that packet and turn off tracing
(since the gigantic pack data will not be interesting to
read, at least not in the trace format).
We show both written and read packets. In the local case,
this may mean you will see packets twice (written by the
sender and read by the receiver). However, for cases where
the other end is remote, this allows you to see the full
conversation.
Packet tracing can be enabled with GIT_TRACE_PACKET=<foo>,
where <foo> takes the same arguments as GIT_TRACE.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE
et.al. to simplify defining -f/--force options.
Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(Just like we did for documentation already)
In the process, we change "non-remote branch" to "branch outside the
refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch".
The new formulation actually corresponds to how the code detects this
case (i.e. prefixcmp(refname, "refs/remotes")).
Also, we use 'remote-tracking branch' in generated merge messages (by
merge an fmt-merge-msg).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save future readers the trouble of tracing code to determine that the two
uses of branch->remote_name are safe when has_merge is set, by adding a
comment explaining that it is so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-fetch-url-only:
builtin/fetch.c: ignore merge config when not fetching from branch's remote
t/t5510: demonstrate failure to fetch when current branch has merge ref
When 'git fetch' is supplied a single argument, it tries to match it
against a configured remote and then fetch the refs specified by the
named remote's fetchspec. Additionally, or alternatively, if the current
branch has a merge ref configured, and if the name of the remote supplied
to fetch matches the one in the branch's configuration, then git also adds
the merge ref to the list of refs to update.
If the argument to fetch does not specify a named remote, or if the name
supplied does not match the remote configured for the current branch, then
the current branch's merge configuration should not be considered.
git currently mishandles the case when the argument to fetch specifies a
GIT URL(i.e. not a named remote) and the current branch has a configured
merge ref. In this case, fetch should ignore the branch's merge ref and
attempt to fetch from the remote repository's HEAD branch. But, since
fetch only checks _whether_ the current branch has a merge ref configured,
and does _not_ check whether the branch's configured remote matches the
command line argument (until later), it will mistakenly enter the wrong
branch of an 'if' statement and will not fall back to fetch the HEAD branch.
The fetch ends up doing nothing and returns with a successful zero status.
Fix this by comparing the remote repository's name to the branch's remote
name, in addition to whether it has a configured merge ref, sooner, so that
fetch can correctly decide whether the branch's configuration is interesting
or not, and fall back to fetching from the remote's HEAD branch when
appropriate.
This fixes the test in t5510.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, if remote.<name>.tagopt was set, the --tags and option would
have no effect when given to git fetch. So if
tagopt="--no-tags"
git fetch --tags
would not actually fetch tags.
This patch changes this behavior to only follow what is written in the
config if there is no option passed by the command line.
Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message is especially confusing when "git fetch" is ran from "git
pull", for users not aware of "git fetch". The new message makes it clear
that "fetch" means "fetch new revisions", and gives hint on the solution.
We don't add a advice.* configuration option since this message doesn't
appear in normal use, and shouldn't disturb advanced users.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rule for selecting the candidates for conversion is: if the callback
function returns only 0 (the condition for for_each_string_list to exit
early), than it can be safely converted to the macro.
A notable exception are the callers in builtin/remote.c. If converted, the
readability in the file will suffer greately. Besides, the code is not very
performance critical (at the moment, at least): it does output formatting of
the list of remotes.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_lookup to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of string_list_insert to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the definition and callers of for_each_string_list to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unfortunately, there are still plenty of production systems with
vendor compilers that choke unless all compound declarations can be
determined statically at compile time, for example hpux10.20 (I can
provide a comprehensive list of our supported platforms that exhibit
this problem if necessary).
This patch simply breaks apart any compound declarations with dynamic
initialisation expressions, and moves the initialisation until after
the last declaration in the same block, in all the places necessary to
have the offending compilers accept the code.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.0.3
fetch: Fix minor memory leak
fetch: Future-proof initialization of a refspec on stack
fetch: Check for a "^{}" suffix with suffixcmp()
daemon: parse_host_and_port SIGSEGV if port is specified
Makefile: Fix CDPATH problem
pull: replace unnecessary sed invocation
* tc/transport-verbosity:
transport: update flags to be in running order
fetch and pull: learn --progress
push: learn --progress
transport->progress: use flag authoritatively
clone: support multiple levels of verbosity
push: support multiple levels of verbosity
fetch: refactor verbosity option handling into transport.[ch]
Documentation/git-push: put --quiet before --verbose
Documentation/git-pull: put verbosity options before merge/fetch ones
Documentation/git-clone: mention progress in -v
Conflicts:
transport.h
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>