The documentation now mentions sendemail.signedoffbycc instead
of sendemail.signedoffcc in order to match with the options
--signed-off-by-cc; the code has been updated to reflect this
as well, but sendemail.signedoffcc is still handled.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The options are partitioned into more digestible groups.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There is also now a configuration variable:
sendemail[.<identity>].validate
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
All of the descriptions are aligned, shorter,
better arranged, and no line is greater than
78 columns.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Specifically, boolean options are now listed in the form
--[no-]option
and both forms of documentation now consistently use
--[no-]signed-off-by-cc
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In 8291db6 (git-send-email: add charset header if we add encoded 'From',
2007-11-16), "$1" is used from a regexp without using () to capture
anything in $1. Later, when that value was used, it causes a warning about
a variable being undefined, instead of using the correct value for
comparison (not that it makes difference in the current code that does not
do actual re-encoding).
Signed-off-by: Peter Valdemar Mørch <peter@morch.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you misuse a git command, you are shown the usage string.
But this is currently shown in the dashed form. So if you just
copy what you see, it will not work, when the dashed form
is no longer supported.
This patch makes git commands show the dash-less version.
For shell scripts that do not specify OPTIONS_SPEC, git-sh-setup.sh
generates a dash-less usage string now.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Send HELO again after a successful STARTTLS command to refresh the list of
extensions. These may be different to what is returned over a clear
connection (for example the AUTH command may be accepted over a secure
connection, but not over a clear connection).
Furthermore, this behaviour is recommended by RFC 2487
(http://www.ietf.org/rfc/rfc2487.txt).
Signed-off-by: Robert Shearman <robertshearman@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous TLS patch, send-email would attempt to STARTTLS at
the beginning of every mail, despite reusing the last connection. We
simply skip further encryption checks after successful TLS initiation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the previous patch, not configuring any encryption (either on or
off) would leave $smtp_encryption undefined. We simply set it to the
empty string in that case.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do this by handing over the Net::SMTP instance to Net::SMTP::SSL,
which avoids Net::SMTP::TLS and its weird error checking. This trick
is due to Brian Evins.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a fifo is given, validation must be skipped because we can't
read the fifo twice. Ideally git-send-email would cache the read
data instead of attempting to read twice, but for now just skip
validation.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When interactively supplying addresses to send an email to with
send-email, whitespace after the separation comma (as in 'list, jc')
wasn't ignored. This meant that resolving of the alias ' jc' would
fail, sending an email only to list. With this patch, the optional
trailing whitespace is ignored.
Signed-off-by: Pieter de Bie <pdebie@ai.rug.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-send-email-compose:
send-email: rfc2047-quote subject lines with non-ascii characters
send-email: specify content-type of --compose body
Conflicts:
t/t9001-send-email.sh
Due to 065096c (git-send-email.perl: Handle shell metacharacters in
$EDITOR properly, 2008-05-04) which is a backward incompatible change (but
it makes handling of EDITOR consistent with other parts of the system),
the test script t9001 had to be adjusted.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Need to quote all special characters, not just the first one
Signed-off-by: Horst H. von Brand <vonbrand@inf.utfsm.cl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We always use 'utf-8' as the encoding, since we currently
have no way of getting the information from the user.
This also refactors the quoting of recipient names, since
both processes can share the rfc2047 quoting code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the compose message contains non-ascii characters, then
we assume it is in utf-8 and include the appropriate MIME
headers. If the user has already included a MIME-Version
header, then we assume they know what they are doing and
don't add any headers.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bd/tests:
Rename the test trash directory to contain spaces.
Fix tests breaking when checkout path contains shell metacharacters
Don't use the 'export NAME=value' in the test scripts.
lib-git-svn.sh: Fix quoting issues with paths containing shell metacharacters
test-lib.sh: Fix some missing path quoting
Use test_set_editor in t9001-send-email.sh
test-lib.sh: Add a test_set_editor function to safely set $VISUAL
git-send-email.perl: Handle shell metacharacters in $EDITOR properly
config.c: Escape backslashes in section names properly
git-rebase.sh: Fix --merge --abort failures when path contains whitespace
Conflicts:
t/t9115-git-svn-dcommit-funky-renames.sh
This fixes the git-send-perl semantics for launching an editor when
$GIT_EDITOR (or friends) contains shell metacharacters to match
launch_editor() in builtin-tag.c. If we use the current approach
(sh -c '$0 $@' "$EDITOR" files ...), we see it fails when $EDITOR has
shell metacharacters:
$ sh -x -c '$0 $@' "$VISUAL" "foo"
+ "$FAKE_EDITOR" foo
"$FAKE_EDITOR": 1: "$FAKE_EDITOR": not found
Whereas builtin-tag.c will invoke sh -c "$EDITOR \"$@\"".
Thus, this patch changes git-send-email.perl to use the same method as the
C utilities, and additionally updates t/t9001-send-email.sh to test for
this bug.
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some projects prefer to always CC patches to a given mailing list. In
these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We might not have some configuration variables available, but if the
user doesn't care about that, neither should we. Still use the
repository if it is available, though.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to countermand suppression of Cc to the signers with a more
explicit --signed-off-by option done in 6564828 (git-send-email:
Generalize auto-cc recipient mechanism) suffers from a double-negation
error.
A --signed-off-cc option, when false, should actively suppress CC: to be
generated out of S-o-b lines, and it should refrain from suppressing when
it is true.
It also fixes "(sob) Adding cc:" status output; earlier it included the
line terminator LF inside '%s', which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression introduced by
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Clarified the meaning of git-add -u in the documentation
git-clone.sh: properly configure remote even if remote's head is dangling
Documentation/git-stash: document options for git stash list
send-email: squelch warning due to comparing undefined $_ to ""
The check to see if initial_reply_to is defined was also comparing $_ to
"" for a reason I cannot ascertain (looking at the commit which made the
change didn't provide enlightenment), but if $_ is undefined, perl
generates a warning.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are a few options to git-send-email to suppress the automatic
generation of 'Cc' fields: --suppress-from, and --signed-off-cc.
However, there are other times that git-send-email automatically
includes Cc'd recipients. This is not desirable for all development
environments.
Add a new option --suppress-cc, which can be specified one or more
times to list the categories of auto-cc fields that should be
suppressed. If not specified, it defaults to values to give the same
behavior as specified by --suppress-from, and --signed-off-cc. The
categories are:
self - patch sender. Same as --suppress-from.
author - patch author.
cc - cc lines mentioned in the patch.
cccmd - avoid running the cccmd.
sob - signed off by lines.
all - all non-explicit recipients
Signed-off-by: David Brown <git@davidb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before, when the user sent the EOF control character, the
prompts would be repeated on the same line as the previous
prompt.
Now, repeat prompts display on separate lines.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A single signal handler is used for both SIGTERM and
SIGINT in order to clean up after an uncouth termination
of git-send-email.
In particular, the handler resets the text color (this cleanup
was already present), turns on tty echoing (in case termination
occurrs during a masked Password prompt), and informs the user
of of any temporary files created by --compose.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whilst convenient, it is most unwise to record passwords
in any place but one's brain. Moreover, it is especially
foolish to store them in configuration files, even with
access permissions set accordingly.
git-send-email has been amended, so that if it detects
an smtp username without a password, it promptly prompts
for the password and masks the input for privacy.
Furthermore, the argument to --smtp-pass has been rendered
optional.
The documentation has been updated to reflect these changes.
Signed-off-by: Michael Witten <mfwitten@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the subtile bug in git send-email that was introduced into
git send-email with aa54892f5a (send-email:
detect invocation errors earlier), which caused no patches to be sent
out if the --compose flag was used.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Tested-by: Seth Falcon <seth@userprimary.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we are now sanity-checking the contents of patches and
refusing to send ones with long lines, this knob provides a
way for the user to override the new behavior (if, e.g., he
knows his SMTP path will handle it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to catch errors early so that we don't end up sending
half of a broken patch series. Right now the only validation
is checking that line-lengths are under the SMTP-mandated
limit of 998.
The validation parsing is very crude (it just checks each
line length without understanding the mailbox format) but
should work fine for this simple check.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never even look at the command line arguments until after
we have prompted the user for some information. So running
"git send-email" without arguments would prompt for "from"
and "to" headers, only to then die with "No patch files
specified." Instead, let's try to do as much error checking
as possible before getting user input.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently git send-email does not accept $EDITOR with arguments, eg,
emacs -nw, when starting an editor to produce a cover letter. This
patch changes this by letting the shell handle the option parsing.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to unconditionally add a message-id to the outgoing
email without bothering to check if it already had one.
Instead, let's use the existing one.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not prompting, initial_reply_to can be left unset. Do not try to
sanitize it and get useless warning.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
3803bcea tried to fix this, but it only adds the branckes when the given
In-Reply-To begins and ends with whitespaces. It also didn't do anything
to the --in-reply-to argument.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using git-send-email with SMTP authentication sending a patch series
would redundantly authenticate multiple times, once for each patch. In
the worst case, this would actually prevent the series from being sent
because the server would reply with a "5.5.0 Already Authenticated"
status code which would derail the process.
This commit teaches git-send-email to authenticate once and only once at
the beginning of the series.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We add the content-type header only when we have non-7bit
characters from the 'From' header, so we really need to
specify the encoding (in other cases, where the commit text
needed a content-type, git-format-patch will already have
added the encoding header).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As a git newbie, it was confusing to set an In-Reply-To header but then
not see it printed when the git-send-email command was run.
This patch prints all headers that would be sent to sendmail or an SMTP
server instead of only printing From, Subject, Cc, To. It also removes
the now-extraneous Date header after the "Log says" line.
Added test to t/t9001-send-email.sh.
Signed-off-by: David D. Kilzer <ddkilzer@kilzer.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We sometimes pick out the original rfc822 'From' header and
include it in the body of the message. If the original
author's name needs encoding, then we should specify that in
the content-type header.
If we already had a content-type header in the mail, then we
may need to re-encode. The logic is there to detect
this case, but it doesn't actually do the re-encoding.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
