Mention that the command below is needed for prompt
in ZSH with PS1:
setopt PROMPT_SUBST
Rephrase some parts that mention only the "current branch name"
being displayed in the prompt. Replace it by stating that
the "repository status" is displayed.
Make it clear that colored prompt is only available
in PROMPT_COMMAND/precmd mode.
With-suggestions-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not print a duplicate clean color code when there
is no other indicators other than the current branch
in colored prompt.
Acked-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_ps1_colorize_gitstring() sets color codes and
builds the prompt gitstring. It has duplicated code
to handle color codes for bash and zsh shells.
__git_ps1() also has duplicated logic to build the
prompt gitstring.
Remove duplication of logic to build gitstring in
__git_ps1_colorize_gitstring() and __git_ps1().
Leave in __git_ps1_colorize_gitstring() only logic
to set color codes.
Signed-off-by: Eduardo R. D'Avila <erdavila@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
__git_ps1() is usually added to the prompt inside a command
substitution, imposing the overhead of fork()ing a subshell. Using
__git_ps1() for $PROMPT_COMMAND is slightly faster, because it avoids
that command substitution.
Mention this in the comments about setting up the git prompt.
The whole series speeds up the bash prompt on Windows/MSysGit
considerably. Here are some timing results in three scenarios, each
repeated 10 times:
At the top of the work tree, before:
$ time for i in {0..9} ; do prompt="$(__git_ps1)" ; done
real 0m1.716s
user 0m0.301s
sys 0m0.772s
After:
real 0m0.687s
user 0m0.075s
sys 0m0.396s
After, from $PROMPT_COMMAND:
$ time for i in {0..9} ; do __git_ps1 '\h:\w' '$ ' ; done
real 0m0.546s
user 0m0.075s
sys 0m0.181s
At the top of the work tree, detached head, before:
real 0m2.574s
user 0m0.376s
sys 0m1.207s
After:
real 0m1.139s
user 0m0.151s
sys 0m0.500s
After, from $PROMPT_COMMAND:
real 0m1.030s
user 0m0.245s
sys 0m0.336s
In a subdirectory, during rebase, stash status indicator enabled,
before:
real 0m3.557s
user 0m0.495s
sys 0m1.767s
After:
real 0m0.717s
user 0m0.120s
sys 0m0.300s
After, from $PROMPT_COMMAND:
real 0m0.577s
user 0m0.047s
sys 0m0.258s
On Linux the speedup ratio is comparable to Windows, but overall it
was about an order of magnitude faster to begin with. The last case
from above, repeated 100 times, before:
$ time for i in {0..99} ; do prompt="$(__git_ps1)" ; done
real 0m2.806s
user 0m0.180s
sys 0m0.264s
After:
real 0m0.857s
user 0m0.020s
sys 0m0.028s
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Before setting $PS1, __git_ps1() uses a command substitution to
redirect the output from a printf into a variable. Spare the overhead
of fork()ing a subshell by using 'printf -v <var>' to directly assign
the output to that variable.
zsh's printf doesn't support the '-v <var>' option, so stick with the
command substitution when under zsh.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When enabled, the bash prompt can indicate the presence of untracked
files with a '%' sign. __git_ps1() checks for untracked files by running the
'$(git ls-files --others --exclude-standard)' command substitution,
and displays the indicator when there is no output.
Avoid this command substitution by additionally passing
'--error-unmatch *', and checking the command's return value.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When the environment variable $GIT_PS1_SHOWSTASHSTATE is set
__git_ps1() checks the presence of stashes by running 'git rev-parse
--verify refs/stash'. This command not only checks that the
'refs/stash' ref exists but also, well, verifies that it's a valid
ref.
However, we don't need to be that thorough for the bash prompt. We
can omit that verification and only check whether 'refs/stash' exists
or not. Since 'git pack-refs' never packs 'refs/stash', it's a matter
of checking the existence of a ref file. Perform this check using
only bash builtins to spare the overhead of fork()+exec()ing a git
process.
Also run 'git pack-refs --all' in the corresponding test to document
that the prompt script depends on 'git pack-refs' not packing
'refs/stash' and to catch possible breakages should this behavior ever
change.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When the dirty work tree and index status indicator is enabled,
__git_ps1() checks for changes in the index by running 'git diff-index
--cached --quiet HEAD --' and looking at its exit code. However, that
makes sense only when HEAD points to a valid commit: on an unborn
branch the failure of said command would be caused by the invalid
HEAD, not by changes in the index. Therefore, __git_ps1() first
checks for a valid HEAD by running 'git rev-parse --quiet --verify
HEAD'.
Since the previous patch we implicitly check HEAD's validity by
running 'git rev-parse ... --short HEAD', making the dirty status
indicator's 'git rev-parse' check redundant. It's sufficient to check
for non-emptyness of the variable holding the abbreviated commit
object name, thereby sparing the overhead of fork()+exec()ing a git
process.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() now runs the '$(git rev-parse
--short HEAD)' command substitution to get the abbreviated detached
HEAD commit object name. This imposes the overhead of fork()ing a
subshell and fork()+exec()ing a git process.
Avoid this overhead by combining this command substitution with the
"main" 'git rev-parse' execution for getting the path to the .git
directory & co. This means that we'll look for the abbreviated commit
object name even when it's not necessary, because we're on a branch or
the detached HEAD can be described. It doesn't matter, however,
because once 'git rev-parse' is up and running to fulfill all those
other queries, the additional overhead of looking for the abbreviated
commit object name is not measurable because it's lost in the noise.
There is a caveat, however, when we are on an unborn branch, because
in that case HEAD doesn't point to a valid commit, hence the query for
the abbreviated commit object name fails. Therefore, '--short HEAD'
must be the last options to 'git rev-parse' in order to get all the
other necessary information for the prompt even on an unborn branch.
Furthermore, in that case, and in that case only, 'git rev-parse'
doesn't output the last line containing the abbreviated commit object
name, obviously, so we have to take care to only parse it if 'git
rev-parse' exited without any error.
Although there are tests already excercising __git_ps1() on unborn
branches, they all do so implicitly. Add a test that checks this
explicitly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
There are a couple of '$(git rev-parse --<opt>)' command substitutions
in __git_ps1() and three of them are executed in the main code path:
- the first to get the path to the .git directory ('--git-dir'),
- the second to check whether we're inside the .git directory
('--is-inside-git-dir'),
- and the last, depending on the results of the second, either
* to check whether it's a bare repo ('--is-bare-repository'), or
* to check whether inside a work tree ('--is-inside-work-tree').
Naturally, this imposes the overhead of fork()ing three subshells and
fork()+exec()ing three git commands.
Combine these four 'git rev-parse' queries into a single one and use
bash parameter expansions to parse the combined output, i.e. to
separate the path to the .git directory from the true/false of
'--is-inside-git-dir', etc. This way we can eliminate two of the
three subshells and git commands.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
__git_ps1() runs the '$(git symbolic-ref HEAD)' command substitution
to find out whether we are on a branch and to find out the name of
that branch. This imposes the overhead of fork()ing a subshell and
fork()+exec()ing a git process.
Since HEAD is in most cases a single-line file and the symbolic ref
format is quite simple to recognize and parse, read and parse it using
only bash builtins, thereby sparing all that fork()+exec() overhead.
Don't display the git prompt if reading HEAD fails, because a readable
HEAD is required for a git repository. HEAD can also be a symlink
symbolic ref (due to 'core.preferSymlinkRefs'), so use bash builtins
for reading HEAD only when HEAD is not a symlink.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
During an ongoing interactive rebase __git_ps1() finds out the name of
the rebased branch, the total number of patches and the number of the
current patch by executing a '$(cat .git/rebase-merge/<FILE>)' command
substitution for each. That is not quite the most efficient way to
read single line single word files, because it imposes the overhead of
fork()ing a subshell and fork()+exec()ing 'cat' several times.
Use the 'read' bash builtin instead to avoid those overheads.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
__git_ps1() finds out the path to the repository by using the
__gitdir() helper function. __gitdir() is basically just a wrapper
around 'git rev-parse --git-dir', extended with support for
recognizing a remote repository given as argument, to use the path
given on the command line, and with a few shortcuts to recognize a git
repository in cwd or at $GIT_DIR quickly without actually running 'git
rev-parse'. However, the former two is only necessary for the
completion script but makes no sense for the bash prompt, while the
latter shortcuts are performance optimizations __git_ps1() can do
without (they just avoid the overhead of fork()+exec()ing a git
process).
Run 'git rev-parse --git-dir' directly in __git_ps1(), because it will
allow this patch series to combine several $(git rev-parse ...)
command substitutions in the main code path, and the overall
performance benefit will far outweigh the loss of those few shortcuts
in __gitdir(). Furthermore, since __gitdir() is not needed anymore
for the prompt, remove it from the prompt script finally eliminating
its duplication between the prompt and completion scripts. Also
remove the comment from the completion script warning about this code
duplication.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
... to gain one level of indentation for the bulk of the function.
(The patch looks quite unreadable, you'd better check it with 'git
diff -w'.)
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
When describing a detached HEAD according to the $GIT_PS1_DESCRIBE
environment variable fails, __git_ps1() runs 'cut -c1-7 .git/HEAD' to
show the 7 hexdigits abbreviated commit object name in the prompt.
Obviously, this neither respects core.abbrev nor produces a unique
object name.
Fix this by using 'git rev-parse --short HEAD' instead and adjust the
corresponding test to use non-standard number of hexdigits.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
* cm/remote-mediawiki-perlcritique: (31 commits)
git-remote-mediawiki: make error message more precise
git-remote-mediawiki: add a perlcritic rule in Makefile
git-remote-mediawiki: add a .perlcriticrc file
git-remote-mediawiki: clearly rewrite double dereference
git-remote-mediawiki: fix a typo ("mediwiki" instead of "mediawiki")
git-remote-mediawiki: put non-trivial numeric values in constants.
git-remote-mediawiki: don't use quotes for empty strings
git-remote-mediawiki: replace "unless" statements with negated "if" statements
git-remote-mediawiki: brace file handles for print for more clarity
git-remote-mediawiki: modify strings for a better coding-style
git-remote-mediawiki: put long code into a subroutine
git-remote-mediawiki: remove import of unused open2
git-remote-mediawiki: check return value of open
git-remote-mediawiki: assign a variable as undef and make proper indentation
git-remote-mediawiki: rename a variable ($last) which has the name of a keyword
git-remote-mediawiki: remove unused variable $entry
git-remote-mediawiki: turn double-negated expressions into simple expressions
git-remote-mediawiki: change the name of a variable
git-remote-mediawiki: add newline in the end of die() error messages
git-remote-mediawiki: change style in a regexp
...
Updates the code to make it more easy to switch mediawiki version when
testing. Before that, the version number was partly hardcoded, partly
in a var.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In subroutine parse_command, error messages were not correct. For the "import"
function, having too much or incorrect arguments displayed both
"invalid arguments", while it displayed "too many arguments" for the "option"
functions under the same conditions.
Separate the two error messages in both cases.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Option "-2" launches perlcritic with level 2. Levels go from 5 (most pertinent)
to 1. Rules of level 1 are mostly a question of style, and are therefore
ignored.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Such a file allows to configure perlcritic.
Here, it is used to remove many unwanted rules and configure one to
remove unwanted warnings.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
@$var structures are re-written in the following way: @{$var}
It makes them more readable.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Non-trivial numeric values (e.g., different from 0, 1 and 2) are placed in
constants at the top of the code to be easily modifiable and to make more sense
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Empty strings are replaced by an $EMPTY constant.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This follows the following rule:
InputOutput::RequireBracedFileHandleWithPrint (Severity: 1)
The `print' and `printf' functions have a unique syntax that supports an
optional file handle argument. Conway suggests wrapping this argument in
braces to make it visually stand out from the other arguments. When you
put braces around any of the special package-level file handles like
`STDOUT', `STDERR', and `DATA', you must the `'*'' sigil or else it
won't compile under `use strict 'subs''.
print $FH "Mary had a little lamb\n"; #not ok
print {$FH} "Mary had a little lamb\n"; #ok
print STDERR $foo, $bar, $baz; #not ok
print {STDERR} $foo, $bar, $baz; #won't compile under 'strict'
print {*STDERR} $foo, $bar, $baz; #perfect!
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- strings which don't need interpolation are single-quoted for more clarity and
slight gain of performance
- interpolation is preferred over concatenation in many cases, for more clarity
- variables are always used with the ${} operator inside strings
- strings including double-quotes are written with qq() so that the quotes do
not have to be escaped
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Explicitly assign local variable $/ as undef and make a proper
one-instruction-by-line indentation
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Local variable $url has the same name as a global variable. Changing the name
of the local variable prevents future possible misunderstanding.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this regexp, ' |\n' is used, whereas its equivalent '[ \n]', which is
clearer, is used elsewhere. Make the style coherent.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use {}{} instead of /// when slashes are used inside the regexp so as not to
escape it.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "split ' '" is turned into a "split / /", which changes its behaviour: the
old method matched a run of whitespaces (/\s*/), while the new one will match a
single space, which is what we want here. Indeed, in other contexts,
changing split(' ') to split(/ /) could potentially be a regression, however,
here, when parsing the output of "rev-list --parents", whose output SHA-1's are
each separated by a single space, splitting on a single space is perfectly
correct.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
m// and // is used randomly. It is better to use the m modifier only when
needed, e.g., when the regexp uses another separator than //.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subroutines' parameters should be assigned to variable before doing anything
else
Besides, existing instruction affected a variable inside a "if", which break
Git's coding style
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put first parameter of map inside a block, for better readability.
Follow BuiltinFunctions::RequireBlockMap
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%basetimestamps declaration was lost in the middle of subroutines
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perl's split function takes a regex pattern argument. You can also
feed it an expression, which is then compiled into a regex at runtime.
It therefore works to pass your pattern via single quotes, but it is
much less obvious to a reader that the argument is meant to be a
regex, not a static string. Using the traditional slash-delimiters
makes this easier to read.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool" can take both revs to be compared and pathspecs.
"git show" takes revs, revs:path and pathspecs.
* rr/complete-difftool-fixup:
completion: show can take both revlist and paths
completion: difftool takes both revs and files
The bridge to MediaWiki has been updated to use the credential
helper interface in Git.pm, losing its own and the original
implementation the former was based on.
* bp/mediawiki-credential:
git-remote-mediawiki: use Git.pm functions for credentials
The files $g/rebase-{merge,apply}/{head-name,msgnum,end} are not
guaranteed to exist. When attempting to cat them, squelch the error
output.
In addition to guarding against stray directories, this patch addresses
a real problem:
# on terminal 1
$ git rebase -i master
# ignore editor, and switch to terminal 2
cat: .git/rebase-merge/msgnum: No such file or directory
cat: .git/rebase-merge/end: No such file or directory
$
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Blameview was a quick-and-dirty demonstration of how blame's
incremental output could be used in an interface. These days
one can find much better (and less ugly!) demonstrations in
"git gui blame" and "tig blame".
The only advantage blameview has is that its code is perhaps
simpler to read. However, that is balanced by the fact that
it probably has bugs, as nobody uses it nor has touched the
code in 6 years. An implementor is probably better off just
reading the "incremental output" section of "man git-blame".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may be confused when they run the perl script directly.
A good way to detect this is to check the number of parameters used to call the
script, which is never different from 2 in a normal use.
Display a proper error message to avoid any confusion.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hint users when https:// connection failed to check the certificate.
* mm/mediawiki-https-fail-message:
git-remote-mediawiki: better error message when HTTP(S) access fails
* fc/remote-bzr:
remote-bzr: add fallback check for a partial clone
remote-bzr: reorganize the way 'wanted' works
remote-bzr: trivial cleanups
remote-bzr: change global repo
remote-bzr: delay cloning/pulling
remote-bzr: simplify get_remote_branch()
remote-bzr: fix for files with spaces
remote-bzr: recover from failed clones
The 'git show' completion uses __git_complete_file (aliased to
__git_complete_revlist_file), because accepts <tree-ish>:<path> as
well as <commit-ish>. But the command also accepts range of commits
in A..B notation, so using __git_complete_revlist_file is more
appropriate.
There still remain two users of __git_complete_file, completions for
"archive" and "ls-tree". As these commands do not take range
notation, and "git show" no longer uses __git_complete_file, the
implementation of it can be updated not to complete ranges, but that
is a separate topic.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash prompt code (in contrib/) displayed the name of the branch
being rebased when "rebase -i/-m/-p" modes are in use, but not the
plain vanilla "rebase".
* fc/show-branch-in-rebase-am:
prompt: fix for simple rebase
zsh prompt script that borrowed from bash prompt script did not
work due to slight differences in array variable notation between
these two shells.
* tg/maint-zsh-svn-remote-prompt:
prompt: fix show upstream with svn and zsh
It turns out that git-subtree script does not have to be run with
bash.
* dm/unbash-subtree:
contrib/git-subtree: Use /bin/sh interpreter instead of /bin/bash
Prompt support (in contrib/) for zsh is updated to use colors.
* rr/zsh-color-prompt:
prompt: colorize ZSH prompt
prompt: factor out gitstring coloring logic
prompt: introduce GIT_PS1_STATESEPARATOR
In 52dce6d, a new credential function was added to Git.pm, based on
git-remote-mediawiki's functions. The logical follow-up is to use
those functions in git-remote-mediawiki.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git difftool' is clearly a frontend to 'git diff' and is used in
exactly the same way, but it uses a misleadingly named completion
function __git_complete_file. It happens to work only because it
calls __git_complete_revlist_file that completes both revs and
paths.
Change it to use __git_complete_revlist_file, just like 'git diff'.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's _very_ slow in many cases, and there's really no point in fetching
*everything* from the remote just for completion. In many cases it might
be faster for the user to type the whole thing.
If the user manually specifies 'refs/*', then the full ls-remote
completion is triggered.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git subtree" (in contrib/) had one codepath with loose error
checks to lose data at the remote side.
* jk/subtree-do-not-push-if-split-fails:
contrib/subtree: don't delete remote branches if split fails
It's better to check in multiple locations, so the user doesn't have to.
And update the documentation.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are rebasing without options ('am' mode), the head rebased lives
in '$g/rebase-apply/head-name', so lets use that information so it's
reported the same way as if we were doing other rebases (-i or -m).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My use-case is an invalid SSL certificate. Pulling from the wiki with a
recent version of libwww-perl fails, and git-remote-mediawiki gave no
clue about the reason. Give the mediawiki API detailed error message, and
since it is not so informative, hint the user about an invalid SSL
certificate on https:// urls.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add protocol imap, imaps, ftp and smtp for credential-osxkeychain.
Signed-off-by: Xidorn Quan <quanxunzhen@gmail.com>
Acked-by: John Szakmeister <john@szakmeister.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And get rid of the remote-hg.force-push option hack.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This needs a specific patch from Git not applied yet.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's better to catch the exception later on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Always convert to strings (they are unicode because they come from JSON).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise replacing a file with a directory doesn't work.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to show the remote heads, not the internal ones, which might
have garbage.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It simply picks the last head that is not closed, but we have a stored
list of open heads.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that when a diverge is detected, we know which ref to report an error
for.
Also, since we are not throwing an exception, return a proper error
code.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version from Mercurial is extremely inefficient and convoluted, this
version achieves basically the same, at least for our purposes.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one from mercurial does a ton of things we are not interested in,
and we need some special modifications which are impossible otherwise.
Most of the code is borrowed from Mercurial, and cleaned up, but should
be functionally the same for our purposes, except that multiple heads
are not detected.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't care about the rest, and in fact, we shouldn't try to push
everything, as there might be garbage from previous failed pushes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we update the 'old' node, we might be updating the remote bookmark
even when our 'new' node is not related at all to what the remote has,
effectively forcing an update.
Let's do that only when forced push is configured.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to update both internal and remote bookmarks, so let's do
one or the other, and move the shared code earlier, so it's simpler.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With lots branches and bookmarks, non-ff, updated and new.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the point of view of Mercurial, this creates a new branch head,
and requires a forced push.
Ideally, however, we would want it to work just like in git; new
branches can be pushed without problems.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neither mercurial nor git allows pushing to a remote when it's a
non-fast-forward push. We should be able to detect these errors and
report them properly, as opposed to throwing an exception
stack-trace.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic when working with a local repository is totally different from
the one where we work with a remote repository; we need to pull and push
from it.
All this logic is currently not tested at all, so let's introduce a
variable to force the remote behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to make sure everything works correctly, even if there's a
'master' bookmark in Mercurial.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial always checks out the 'default' branch, so there's no point in
complicating our lives trying to do something fancier, which causes
different behavior depending on whether the repository is local or
remote.
So let's always use 'default' (which we translate to 'master'), unless
we are in hg-git mode, which expects us to use the 'master' bookmark
instead.
Also, update the tests that used to check for different checkout
behaviors to simply check that the refs are there, remove unnecessary
ones, and fix the ones that expect something different.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to manually keep track of the revision count.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Jed Brown; there's no need to re-import all the commits.
Cc: Jed Brown <jed@59a2.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we won't know if revisions are replaced.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We won't be able to count the unmarked commits, but we are not going to
be able to do that anyway when we switch to SHA-1 ids.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we don't have to have duplicated Mercurial objects.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user might have then configured differently, plus, all of them will
be loaded anyway later on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we don't need a temporary directory.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So it's more standardized between all the tests.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only need to get the remote dict once.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specified a list of branches, we ignore what the remote
repository lists, and simply use the branches directly. Since some
remotes don't report the branches correctly, this is useful.
Otherwise either fetch the repo, or the branch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until the branch is actually going to be used.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need for 'origin', it's only needed for the bzrdir 'sprout' method,
which can be greatly simplified.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the maximum number of splits to make when dividing the diff stat
lines based on space characters.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the __git_ps1 git prompt gives the following error with a
repository converted by git-svn, when used with zsh:
__git_ps1_show_upstream:19: bad pattern: svn_remote[
__git_ps1_show_upstream:45: bad substitution
To reproduce the problem, the __git_ps1_show_upstream function can be
executed in a repository converted with git-svn. Both those errors are
triggered by spaces after the '['.
Zsh also doesn't support initializing an array with `local var=(...)`.
This triggers the following error:
__git_ps1_show_upstream:41: bad pattern: svn_upstream=(commit
Use
local -a
var=(...)
instead to make is compatible.
This was introduced by 6d158cba (bash completion: Support "divergence
from upstream" messages in __git_ps1), when the script was for bash
only.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's specify a merge tool, otherwise mercurial might open one and hang
our tests waiting for user input.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These remote helpers use 'env python', not PYTHON_PATH, so that's where
we should check for the extensions. Otherwise, if 'python' is not
PYTHON_PATH (e.g. /usr/bin/python: Makefile's default), there will be a
mismatch between the python libraries actually accessible to the remote
helpers.
Suggested by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The other configurations were added in the wrong place.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the style of the previous configurations.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh completion wrapper doesn't reimplement __gitcompadd(). Although it
should be trivial to do that, let's use __gitcomp_nl() which achieves
exactly the same thing, specially since the suffix ($4) has to be empty.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use /bin/sh interpreter instead of /bin/bash for contrib/git-subtree:
it's required for systems which don't use bash by default (for example,
FreeBSD), while there seem to be no bashisms in the script (confirmed
by looking through the source and tesing subtree functionality with
FreeBSD's /bin/sh) to require specifically bash and not the generic
posix shell.
Signed-off-by: Dmitry Marakasov <amdmi3@amdmi3.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clone hangs on windows, and file.write would return errno 22 inside
of mercurial's windows.winstdout wrapper class. This patch sets stdout's
mode to binary, fixing both issues.
[fc: cleaned up]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Down to v2.0, by using older but still valid interfaces.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add colors suitable for use in the ZSH prompt. Having learnt that the
ZSH equivalent of PROMPT_COMMAND is precmd (), you can now use
GIT_PS1_SHOWCOLORHINTS with ZSH.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can extend it with ZSH-colors in a later patch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical prompt looks like:
artagnon|master *=:~/src/git$
^
why do we have this space?
Nobody has branch names that end with +, *, =, < or > anyway, so it
doesn't serve the purpose of disambiguation.
Make this separator configurable via GIT_PS1_STATESEPARATOR. This means
that you can set it to "" and get this prompt:
artagnon|master*=:~/src/git$
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 24317ef32a.
Different versions of Mercurial have different arguments for
bookmarks.updatefromremote(), while it should be possible to call the
right function with the right arguments depending on the version, it's
safer to restore the old behavior for now.
Reported by Rodney Lorrimar.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 95b0c60 (remote-bzr: add support for bzr repos) introduced a
regression by assuming all bzr remote repos are listable, but they are
not.
If they are not listable they are basically useless, so let's assume
there is no bzr repo.
Reported-by: Thorsten Kranzkowski <dl8bcu@dl8bcu.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, the user would never ever see new bookmarks, only the
ones that (s)he initially cloned.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We skip it locally, but not for the remote, so let's do so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In certain situations we might end up pushing garbage revisions
(e.g. in a rebase), and the patches to deal with that haven't been
merged yet. So let's disable forced pushes by default.
We are essentially reverting back to the old v1.8.2 behavior, to
minimize the possibility of regressions, but in a way the user can
configure.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user creates a new branch with git:
% git checkout -b branches/devel
and then pushes this branch
% git push origin branches/devel
which is the way to push new mercurial branches, we do want to
create a branch, but the command would fail without newbranch=True.
This only matters when force_push=False, but setting newbranch=True
unconditionally does not hurt.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove try/except check because we are no longer calling
check_output(), which may throw an exception.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop unused "global", and remove redundant comparison of two files.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a clone exists with the old organization (v1.8.2) it will prevent
the new shared bzr repository organization from working, so let's
remove this repository, which is not used any more.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using sed -e '/[0-9]\+//' to find "one or more digits" is not
portable.
Use the Basic Regular Expression '/[0-9][0-9]*//' instead.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SVN::Fetcher module is now able to filter for inclusion as well
as exclusion (as used by --ignore-path). Also added tests, documentation
changes and git completion script.
If you have an SVN repository with many top level directories and you
only want a git-svn clone of some of them then using --ignore-path is
difficult as it requires a very long regexp. In this case it's much
easier to filter for inclusion.
[ew: remove trailing whitespace]
Signed-off-by: Paul Walmsley <pjwhams@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
There's no need for a separate function; we can call
'emulate -k ksh func'.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment was copied from hg-fast-export, not used anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that the previous tip goes away, we should not assume it's
always present. Fortunately we are only using it to calculate the
progress to display to the user, so only that needs to be fixed.
Also, add a test that triggers this issue.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-bzr:
remote-bzr: avoid bad refs
remote-bzr: convert all unicode keys to str
remote-bzr: access branches only when needed
remote-bzr: delay peer branch usage
remote-bzr: iterate revisions properly
remote-bzr: improve progress reporting
remote-bzr: add option to specify branches
remote-bzr: add custom method to find branches
remote-bzr: improve author sanitazion
remote-bzr: add support for shared repo
remote-bzr: fix branch names
remote-bzr: add support for bzr repos
remote-bzr: use branch variable when appropriate
remote-bzr: fix partially pushed merge
remote-bzr: fixes for branch diverge
remote-bzr: add support to push merges
remote-bzr: always try to update the worktree
remote-bzr: fix order of locking in CustomTree
remote-bzr: delay blob fetching until the very end
remote-bzr: cleanup CustomTree
Versions of fast-export before v1.8.2 throws a bad 'reset' commands
because of a behavior in transport-helper that is not even needed.
We should ignore them, otherwise we will treat them as branches and
fail.
This was fixed in v1.8.2, but some people use this script in older
versions of git.
Also, check if the ref was a tag, and skip it for now.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise some versions of bazaar might barf.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh is smart enough to add the right suffix while completing, there's no
point in trying to do the same as bash.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git subtree push" to split out a subtree and push it to a
remote repository, we do not detect if the split command fails which
causes the LHS of the refspec to be empty, deleting the remote branch.
Fix this by pulling the result of the split command into a variable so
that we can die if the command fails.
Reported-by: Steffen Jaeckel <steffen.jaeckel@stzedn.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bazaar doesn't seem to be tested for multiple usage of branches, so
resources seem to be leaked all over. Let's try to minimize this by
accessing the Branch objects only when needed.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we don't need to store the list of all the revisions, which
doesn't seem to be very memory efficient with bazaar's design, for
whatever reason.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to manually count the revisions, and also, this would help to
iterate more properly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We might not want all the branches. And branch handling in bazaar is
rather tricky, so it's safer to simply specify them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The official method is incredibly inefficient and slow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we don't end up with '<None>', and also synchronize it with the
one from remote-hg.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way all the remotes share the same data, so adding multiple
remotes, or renaming them doesn't create extra overhead.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When branches have '/' in their name (aka. sub-branches), bazaar seems
to choke while creating the new directory.
Also, git cannot have both 'foo' and 'foo/bar'.
So let's replace slashes with a plus sign.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bazaar, a repository can contain multiple branches, and previously we
were supporting only one branch at a time. Now we fetch them all.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There should be no functional changes. Basically we want to reserve the
'repo' variable.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If part of the merge was already pushed, we don't have the blob_marks
available, however, the commits are already stored in bazaar, so we can
use the revision_tree to fetch the contents.
We want to do this only when there's no other option.
There's no easy way to test this.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the branches diverge we want to reset the pointer to where the remote
actually is. Since we can access remote branches just as easily as local
ones, let's do so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to do that, we need to store the marks of every file, so that
they can be fetched when needed. Unfortunately we can't tell bazaar that
nothing changed, we need to send the data so that it can figure it out
by itself.
And since it will be requesting a bunch of information by the file_id,
it's better to have a helper dict (rev_files), so that we can fetch it
quickly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It doesn't seem to make any difference, but revision_tree() requires a
lock.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Might be more efficient, but the real reason to use the marks will be
revealed in upcoming patches.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
224c2171 (remote.c: introduce remote.pushdefault, 2013-04-02)
introduced the remote.pushdefault configuration variable, but forgot
to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9f765ce (remote.c: introduce branch.<name>.pushremote, 2013-04-02)
introduced the configuration variable branch.*.pushremote, but forgot
to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
complete: zsh: use zsh completion for the main cmd
complete: zsh: trivial simplification
git-completion.bash: complete branch.*.rebase as boolean
git-completion.bash: add diff.submodule to config list
git-completion.bash: lexical sorting for diff.statGraphWidth
So that we can have a nice zsh completion output:
% git <tab>
add -- add file contents to the index
bisect -- find by binary search the change that introduced a bug
branch -- list, create, or delete branches
checkout -- checkout a branch or paths to the working tree
clone -- clone a repository into a new directory
commit -- record changes to the repository
diff -- show changes between commits, commit and working tree, etc
fetch -- download objects and refs from another repository
grep -- print lines matching a pattern
init -- create an empty Git repository or reinitialize an existing one
log -- show commit logs
merge -- join two or more development histories together
mv -- move or rename a file, a directory, or a symlink
pull -- fetch from and merge with another repository or a local branch
push -- update remote refs along with associated objects
rebase -- forward-port local commits to the updated upstream head
reset -- reset current HEAD to the specified state
rm -- remove files from the working tree and from the index
show -- show various types of objects
status -- show the working tree status
tag -- create, list, delete or verify a tag object signed with GPG
And other niceties, like 'git --git-dir=<tab>' showing only directories.
For the rest, the bash completion stuff is still used.
Also, add my copyright, since this more than a thin wrapper.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There should be no functional changes.
The only reason I wrapped this code around a sub-function is because zsh
did the same in it's bashcompinit script in order to declare the special
variable 'words' as hidden, but only in this context.
There's no need for that any more since we access __git_main directly,
so 'words' is not modified, so there's no need for the sub-function.
In zsh mode the array indexes are different though.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6fac1b83 (completion: add missing config variables, 2009-06-29) added
"rebase" to the list of completions for "branch.*.*", but forgot to
specify completions for the values that this configuration variable
can take (namely "false" and "true"). Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c47ef57 (diff: introduce diff.submodule configuration variable,
2012-11-13) introduced the diff.submodule configuration variable, but
forgot to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
df44483a (diff --stat: add config option to limit graph width,
2012-03-01) added the option diff.startGraphWidth to the list of
configuration variables in git-completion.bash, but failed to notice
that the list is sorted alphabetically. Move it to its rightful place
in the list.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the code into the only caller; __git_index_files().
Also, Somehow messing up with the 'path' variable messes up the 'PATH'
variable. So let's not do that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like before fea16b4 (git-completion.bash: add support for path
completion).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we don't need all the compat stuff, different filters, and so
on. Also, now we complete exactly the same in bash 3 and bash 4.
This is the way bash-completion did it for quite some time, when bash 3
was supported. For more information about the hack:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=272660#64
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The calls to __gitcomp_file() are essentially the same, but with
different prefix.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of the day what we really need is to find out the files that
have been staged, or modified, because those files are the ones that
make sense to pass as arguments to 'git commit'.
We need diff-index to find those out, since 'git ls-files' doesn't do
that.
But we don't need wrappers and wrappers basically identical to the ones
used for 'git ls-files', when we can pretend it receives a --committable
option that would return what we need.
That way, we can remove a bunch of code without any functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the rest of the script does; let's not access COMPREPLY directly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only caller, __git_complete_index_file() doesn't specify any limits
to the options for 'git ls-files', neither should this function.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's added by fast-export, the user didn't type it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we get notification, progress bars, and what not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bazaar might convert the URL to something more appropriate, like an
absolute path. Lets store that instead of the original URL, which won't
work from a different working directory if it's relative.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carried from remote-hg.
The problem reportedly happened after doing a push that fails, the abort
causes the state of remote-hg to go bad, this happens because
remote-hg's marks are not stored, but 'git fast-export' marks are.
Ensure that the marks are _always_ stored.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not needed since we use xrange ourselves.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No functional changes. Typos, unused variables, redundant operations,
and white-spaces.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-hg:
remote-hg: strip extra newline
remote-hg: use marks instead of inlined files
remote-hg: small performance improvement
remote-hg: allow refs with spaces
remote-hg: don't update bookmarks unnecessarily
remote-hg: add support for schemes extension
remote-hg: improve email sanitation
remote-hg: add custom local tag write code
remote-hg: write tags in the appropriate branch
remote-hg: custom method to write tags
remote-hg: add support for tag objects
remote-hg: add branch_tip() helper
remote-hg: properly mark branches up-to-date
remote-hg: use python urlparse
remote-hg: safer bookmark pushing
remote-helpers: avoid has_key
The shell syntax "export X=Y" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell syntax "export X=Y A=B" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not just randomly synchronize the revisions with no checks at
all.
I don't have any evidence that there's anything wrong with the
current code, which Bazaar seems to use, but for different purposes.
Let's use the logic Bazaar UI uses to avoid surprises.
Also, add a non-ff check.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a rebase stops (e.g. interrupted by a merge conflict), it could
be useful to know how far a rebase has progressed and how many
commits in total this rebase will apply. Teach the __git_ps1()
command to display the number of commits so far applied and the
total number of commits to be applied, like this:
((3ec0a6a...)|REBASE 2/5)
In the example above the rebase has stopped at the second commit due to
a merge conflict and there are a total number of five commits to be
applied by this rebase.
This information can be already obtained from the following files which are
being generated during the rebase:
GIT_DIR/.git/rebase-merge/msgnum (git-rebase--merge.sh)
GIT_DIR/.git/rebase-merge/end (git-rebase--merge.sh)
GIT_DIR/.git/rebase-apply/next (git-am.sh)
GIT_DIR/.git/rebase-apply/last (git-am.sh)
but "rebase -i" does not leave necessary clues.
Implement this feature by doing these three things:
1) Modify git-rebase--interactive.sh to also create
GIT_DIR/.git/rebase-merge/msgnum
GIT_DIR/.git/rebase-merge/end
files for the number of commits so far applied and the total
number of commits to be applied.
2) Modify git-prompt.sh to read and display info from the above
files.
3) Update test t9903-bash-prompt.sh to reflect changes introduced
by this patch.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove one of two consecutive, identical blocks for "git commit -c".
This was caused by a mechanical mismerge at d931e2fb25 (Merge
branch 'mp/complete-paths', 2013-02-08). The side branch wanted to
add this block at fea16b47 but the same fix was done independently
at 685397585 already.
Signed-off-by: Mårten Kongstad <marten.kongstad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no functional change since mercurial commit operation strips
that anyway, but that's no excuse for us not to do the right thing. So
let's be explicit about it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can find already exported ones. We can never be 100% sure
that we already exported such data, due to mercurial design, it at least
sometimes we should detect them, and so should give us some performance
boost.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Load previous manifest first as Mercurial does; for caching reasons.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can use shortened URLs, for example 'bb:://felipec/repo'
(Bitbucket).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no point in calling the tag method for such simple action. Not
that we care much about the hg-git compat mode, it's mostly just for
comparison testing purposes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one from mercurial is meant for users, on top of the latest tip.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Idea from gitifyhg, the backwards compatibility is how Mercurial used to
do it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's simpler, and we don't need to depend on certain Mercurial versions.
Also, now we don't update the URL if 'file://' is not present.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible that the remote has changed the bookmarks, so let's fetch
them before we make any assumptions, just the way mercurial does.
Probably doesn't make a difference, but better be safe than sorry.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is deprecated.
[fc: do the same in remote-bzr]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We signal presense of untracked files by adding a per-cent sign '%'
to the prompt. But because '%' is used as an escape character to
introduce prompt customization in zsh (just like bash prompt uses
'\' to escape '\u', '\h', etc.), we need to say '%%' to get a
literal per-cent.
Helped-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to a user visible change to offer more options to cherry-pick,
generally cleans up and simplifies the code.
* fc/completion:
completion: small optimization
completion: inline __gitcomp_1 to its sole callsite
completion: get rid of compgen
completion: add __gitcomp_nl tests
completion: add new __gitcompadd helper
completion: get rid of empty COMPREPLY assignments
completion: trivial test improvement
completion: add more cherry-pick options
git fast-import expects an extra newline after the commit message data,
but we are adding it only on hg-git compat mode, which is why the
bidirectionality tests pass.
We should add it unconditionally.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the current transport-helper code, refs without namespaced refspecs don't
work correctly, so let's always use them.
Some people reported issues with 'git clone --mirror', and this fixes them, as
well as possibly others.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to calculate a new $c with a space if we are not going to do
anything it with it.
There should be no functional changes, except that a word "foo " with no
suffixes can't be matched. But $cur cannot have a space at the end
anyway. So it's safe.
Based on the code from SZEDER Gábor.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point in calling a separate function that is only used
in one place. Especially considering that there's no need to call
compgen, and we traverse the words ourselves both in __gitcompadd,
and __gitcomp_1.
Let's squash the functions together, and traverse only once.
This improves performance. For N number of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.005s
new: 0.001s
== 100 ==
original: 0.009s
new: 0.006s
== 1000 ==
original: 0.027s
new: 0.019s
== 10000 ==
original: 0.163s
new: 0.151s
== 100000 ==
original: 1.555s
new: 1.497s
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality we use from compgen is not much, we can do the same
manually, with drastic improvements in speed, especially when dealing
with only a few words.
This patch also has the sideffect that brekage reported by Jeroen Meijer
and SZEDER Gábor gets fixed because we no longer expand the resulting
words.
Here are some numbers filtering N amount of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.000s
== 100 ==
original: 0.003s
new: 0.002s
== 1000 ==
original: 0.012s
new: 0.011s
== 10000 ==
original: 0.056s
new: 0.066s
== 100000 ==
original: 2.669s
new: 0.622s
If the results are not narrowed:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.001s
== 100 ==
original: 0.004s
new: 0.004s
== 1000 ==
original: 0.020s
new: 0.015s
== 10000 ==
original: 0.101s
new: 0.355s
== 100000 ==
original: 2.850s
new: 31.941s
So, unless 'git checkout <tab>' usually gives you more than 10000
results, you'll get an improvement :)
Other possible solutions perform better after 1000 words, but worst if
less than that:
COMPREPLY=($(awk -v cur="$3" -v pre="$2" -v suf="$4"
'$0 ~ cur { print pre$0suf }' <<< "$1" ))
COMPREPLY=($(printf -- "$2%s$4\n" $1 | grep "^$2$3"))
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea is to never touch the COMPREPLY variable directly.
This allows other completion systems (i.e. zsh) to override
__gitcompadd, and do something different instead.
Also, this allows further optimizations down the line.
There should be no functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the shell script more portable:
- Split export X=Y into 2 lines
- Use printf instead of echo -e
Use UTF-8 code points which are not decomposed by the filesystem:
Code points like "á" will be decomposed by Mac OS X.
bzr is unable to find the file "á" on disk.
Use code points from unicode which can not be decomposed.
In other words, the precompsed form use the same bytes as decomposed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
Noticed with Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these were found using Lucas De Marchi's codespell tool.
Others were pointed out by Eric Sunshine.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no functional reason for those, the only purpose they are
supposed to serve is to say "we don't provide any words here", but
even for that it's not used consistently.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hg_log() test helper uses the "--graph" parameter that is
implemented by the GraphLog extension. If the extension is not activated
by the user, the parameter is not available. Activate the extension in
setup().
Also changes the way we grep the output in hg_log(). The pipe operator
can hide the return code of hg command. As a matter of fact, if log
fails because it doesn't know about "--graph", it doesn't report any
failure and let's you think everything worked.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial allows absolute file paths, and Git doesn't like that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem reportedly happened after doing a push that fails, the abort
causes the state of remote-hg to go bad, this happens because
remote-hg's marks are not stored, but 'git fast-export' marks are.
Ensure that the marks are _always_ stored.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If set to true acts as hg's clone/pull --insecure option.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning or pushing fails, we don't want to show a stack-trace.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally we shouldn't do this, as it's not recommended in mercurial
documentation, but there's no other way to push multiple bookmarks (on
the same branch), which would be the behavior most similar to git.
At the same time, add a configuration option for the people that don't
want to risk creating new remote heads.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial emits messages like "searching for changes", "no changes
found", etc. meant for the use of its own UI layer, which break the pipe
between transport helper and remote helper.
Since there's no way to silence Mercurial, let's redirect to standard
error.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the maximum number of splits to make when dividing the diff stat
lines based on space characters.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
revision_history() is deprecated and doesn't do what we want (revno
instead of dotted_revno?).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patches didn't deal with all the scenarios.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-helpers-test-updates:
remote-hg: fix hg-git test-case
remote-bzr: remove stale check code for tests
remote-helpers: fix the run of all tests
remote-bzr: avoid echo -n
Using grep "devel\s\+3:" to find at least one whitspace is not
portable on all grep versions; not all grep versions understand "\s"
as a "whitespace".
Use a literal TAB followed by SPACE.
The + as a qualifier for "one or more" is not a basic regular
expression; use egrep instead of grep.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They have no content, there's nothing we can do with them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently, that's the only way it's possible.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow re-add of a deleted file in the same commit.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git does not handle directories, renaming a directory is renaming every
files in this directory.
[fc: added tests]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was some lingering code that shouldn't have been there in the
first place.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The fastimport plugin was only required in the early stage of
development.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to check for duplicate test numbers, we don't have them,
and either way test-lint-duplicates doesn't work in this situation.
Also, while we are on it, enable test-lint-shell-syntax to check for sh
errors.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not portable, as reported by test-lint.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prompt string generator did not notice when we are in a middle
of a "git revert" session.
* rr/prompt-revert-head:
bash: teach __git_ps1 about REVERT_HEAD
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
There was no Porcelain way to say "I no longer am interested in
this submodule", once you express your interest in a submodule with
"submodule init". "submodule deinit" is the way to do so.
* jl/submodule-deinit:
submodule: add 'deinit' command
A new read-only credential helper (in contrib/) to interact with
the .netrc/.authinfo files. Hopefully mn/send-email-authinfo topic
can rebuild on top of something like this.
* tz/credential-authinfo:
Add contrib/credentials/netrc with GPG support
* da/downcase-u-in-usage:
contrib/mw-to-git/t/install-wiki.sh: use a lowercase "usage:" string
contrib/examples/git-remote.perl: use a lowercase "usage:" string
tests: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
Documentation/user-manual.txt: use a lowercase "usage:" string
templates/hooks--update.sample: use a lowercase "usage:" string
contrib/hooks/setgitperms.perl: use a lowercase "usage:" string
contrib/examples: use a lowercase "usage:" string
contrib/fast-import/import-zips.py: use spaces instead of tabs
contrib/fast-import/import-zips.py: fix broken error message
contrib/fast-import: use a lowercase "usage:" string
contrib/credential: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsimport: use a lowercase "usage:" string
git-cvsexportcommit: use a lowercase "usage:" string
git-archimport: use a lowercase "usage:" string
git-merge-one-file: use a lowercase "usage:" string
git-relink: use a lowercase "usage:" string
git-svn: use a lowercase "usage:" string
git-sh-setup: use a lowercase "usage:" string
A recent change added functions whose entire standard error stream
is redirected to /dev/null using a construct that is valid POSIX.1
but is not widely used:
funcname () {
cd "$1" && run some command "$2"
} 2>/dev/null
Even though this file is "git-completion.bash", zsh completion
support dot-sources it (instead of asking bash to grok it like tcsh
completion does), and zsh does not implement this redirection
correctly.
With zsh, trying to complete an inexistant directory gave this:
git add no-such-dir/__git_ls_files_helper💿2: no such file or directory: no-such-dir/
Also these functions use "cd" to first go somewhere else before
running a command, but the location the caller wants them to go that
is given as an argument to them should not be affected by CDPATH
variable the users may have set for their interactive session.
To fix both of these, wrap the body of the function in a subshell,
unset CDPATH at the beginning of the subshell, and redirect the
standard error stream of the subshell to /dev/null.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fea16b47b6 (Fri Jan 11 19:48:43 2013, Manlio Perillo,
git-completion.bash: add support for path completion), introduced a new
__gitcomp_file function that uses the bash builtin "compgen". The
function was redefined for ZSH in the deprecated section of
git-completion.bash, but not in the new git-completion.zsh script.
As a result, users of git-completion.zsh trying to complete "git add
fo<tab>" get an error:
git add fo__gitcomp_file:8: command not found: compgen
This patch adds the redefinition and removes the error.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With "git submodule init" the user is able to tell git he cares about one
or more submodules and wants to have it populated on the next call to "git
submodule update". But currently there is no easy way he could tell git he
does not care about a submodule anymore and wants to get rid of his local
work tree (except he knows a lot about submodule internals and removes the
"submodule.$name.url" setting from .git/config together with the work tree
himself).
Help those users by providing a 'deinit' command. This removes the
whole submodule.<name> section from .git/config (either for the given
submodule(s) or for all those which have been initialized if '.' is used)
together with their work tree. Fail if the current work tree contains
modifications (unless forced), but don't complain when either the work
tree is already removed or no settings are found in .git/config.
Add tests and link the man pages of "git submodule deinit" and "git rm"
to assist the user in deciding whether removing or unregistering the
submodule is the right thing to do for him. Also add the deinit subcommand
to the completion list.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On WinXP, the windows credential helper doesn't work at all (due to missing
Cred[Un]PackAuthenticationBuffer APIs). On Win7, the credential format used
by wincred is incompatible with native Windows tools (such as the control
panel applet or 'cmdkey.exe /generic'). These Windows tools only set the
TargetName, UserName and CredentialBlob members of the CREDENTIAL
structure (where CredentialBlob is the UTF-16-encoded password).
Remove the unnecessary packing / unpacking of the password, along with the
related API definitions, for compatibility with Windows XP.
Don't use CREDENTIAL_ATTRIBUTEs to identify credentials for compatibility
with Windows credential manager tools. Parse the protocol, username, host
and path fields from the credential's target name instead.
Credentials created with an old wincred version will have mangled or empty
passwords after this change.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
The windows credential helper currently only accepts LF on stdin, but bash
and cmd.exe both send CRLF. This prevents interactive use in the console.
Change the stdin parser to optionally accept CRLF.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
This credential helper supports multiple files, returning the first one
that matches. It checks file permissions and owner. For *.gpg files,
it will run GPG to decrypt the file.
Signed-off-by: Ted Zlatanov <tzz@lifelogs.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the conventional Python style by using 4-space indents
instead of hard tabs.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'sys' module is not imported but all of the bits
we want from it are. Adjust the script to not fail
when run on old Python versions and fix the inconsistent
use of tabs.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the usage string consistent with Git.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor clean up of if-then nesting in checks for environment variables
and config options. No functional changes.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add diff.algorithm configuration so that the user does not type
"diff --histogram".
* mp/diff-algo-config:
diff: Introduce --diff-algorithm command line option
config: Introduce diff.algorithm variable
git-completion.bash: Autocomplete --minimal and --histogram for git-diff
Allows skipping the untracked check GIT_PS1_SHOWUNTRACKEDFILES
asks for the git-prompt (in contrib/) per repository.
* mw/bash-prompt-show-untracked-config:
t9903: add extra tests for bash.showDirtyState
t9903: add tests for bash.showUntrackedFiles
shell prompt: add bash.showUntrackedFiles option
contrib/subtree updates, but here are only the ones that looked
ready. The remainder of the patches will have another day.
* dg/subtree-fixes:
contrib/subtree: make the manual directory if needed
contrib/subtree: honor DESTDIR
contrib/subtree: fix synopsis
contrib/subtree: better error handling for 'subtree add'
contrib/subtree: use %B for split subject/body
contrib/subtree: remove test number comments
Add a config option 'bash.showUntrackedFiles' which allows enabling
the prompt showing untracked files on a per-repository basis. This is
useful for some repositories where the 'git ls-files ...' command may
take a long time.
Signed-off-by: Martin Erik Werner <martinerikwerner@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This needs to be done in two places: __git_config_get_set_variables to
allow clever completion of "git config --local --get foo<tab>", and
_git_config to allow "git config --loc<tab>" to complete to --local.
While we're there, change the order of options in the code to match
git-config.txt.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "complete with known paths only" update to completion scripts
returns directory names without trailing slash to compensate the
addition of '/' done by bash that reads from our completion result.
tcsh completion code that reads from our internal completion result
does not add '/', so let it ask our complletion code to keep the '/'
at the end.
* mk/tcsh-complete-only-known-paths:
completion: handle path completion and colon for tcsh script
The completion script used to let the default completer to suggest
pathnames, which gave too many irrelevant choices (e.g. "git add"
would not want to add an unmodified path). Teach it to use a more
git-aware logic to enumerate only relevant ones.
* mp/complete-paths:
git-completion.bash: add support for path completion
This makes the Makefile simpler, while providing more features, and more
consistency (the exact same rules with the exact same configuration as
Git official commands are applied with the new version).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Scripts to test bash completion was inherently flaky as it was
affected by whatever random things the user may have on $PATH.
* jc/do-not-let-random-file-interfere-with-completion-tests:
t9902: protect test from stray build artifacts
Before install git-subtree documentation, make sure the manpage
directory exists.
Signed-off-by: Jesper L. Nielsen <lyager@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-subtree's Makefile to honor DESTDIR.
Signed-off-by: Adam Tkac <atkac@redhat.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the documentation of add to show that a repository can be
specified along with a commit.
Suggested by Yann Dirson <dirson@bertin.fr>.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check refspecs for validity before passing them on to other commands.
This lets us generate more helpful error messages.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use %B to format the commit message and body to avoid an extra newline
if a commit only has a subject line.
Signed-off-by: Techlive Zheng <techlivezheng@gmail.com>
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Delete the comments indicating test numbers as it causes maintenance
headaches. t*.sh -i will help us find any broken tests and these
numbers are not helping us anyway.
Signed-off-by: David A. Greene <greened@obbligato.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare remote-helper test written in Python to be run with Python3.
* jk/remote-helpers-in-python-3:
git_remote_helpers: remove GIT-PYTHON-VERSION upon "clean"
git-remote-testpy: fix path hashing on Python 3
git-remote-testpy: call print as a function
git-remote-testpy: don't do unbuffered text I/O
git-remote-testpy: hash bytes explicitly
svn-fe: allow svnrdump_sim.py to run with Python 3
git_remote_helpers: use 2to3 if building with Python 3
git_remote_helpers: force rebuild if python version changes
git_remote_helpers: fix input when running under Python 3
git_remote_helpers: allow building with Python 3
Command line completion code was inadvertently made incompatible with
older versions of bash by using a newer array notation.
* bc/fix-array-syntax-for-3.0-in-completion-bash:
git-completion.bash: replace zsh notation that breaks bash 3.X
Recent enhancements to git-completion.bash provide intelligent path
completion for git commands. Such completions do not provide the
'/' at the end of directories for recent versions of bash; instead,
bash itself will add the trailing slash to directories to the result
provided by git-completion.bash. However, the completion for tcsh
uses the result of the bash completion script directly, so it either
needs to add the necessary slash itself, or needs to ask the bash
script to keep the trailing slash.
Adding the slash itself is difficult because we have to check the
each path in the output of the bash script to see if it is meant to
be a directory or something else. For example, assuming there is a
directory named 'commit' in the current directory, then, when
completing
git add commit<tab>
we would need to add a slash, but for
git help commit<tab>
we should not.
Figuring out such differences would require adding much intelligence
to the tcsh completion script. Instead, it is simpler to ask the
bash script to keep the trailing slash. This patch does this.
Also, tcsh does not handle the colon as a completion separator so we
remove it from the list of separators.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Scripts to test bash completion was inherently flaky as it was
affected by whatever random things the user may have on $PATH.
* jc/do-not-let-random-file-interfere-with-completion-tests:
t9902: protect test from stray build artifacts
Command line completion for "tcsh" emitted an unwanted space
after completing a single directory name.
* mk/complete-tcsh:
Prevent space after directories in tcsh completion
Fix use of an array notation that older versions of bash do not
understand.
* bc/fix-array-syntax-for-3.0-in-completion-bash:
git-completion.bash: replace zsh notation that breaks bash 3.X
The changes to allow this script to run with Python 3 are minimal and do
not affect its functionality on the versions of Python 2 that are
already supported (2.4 onwards).
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have random build artifacts in your build directory, left
behind by running "make" while on another branch, the "git help -a"
command run by __git_list_all_commands in the completion script that
is being tested does not have a way to know that they are not part
of the subcommands this build will ship. Such extra subcommands may
come from the user's $PATH. They will interfere with the tests that
expect a certain prefix to uniquely expand to a known completion.
Instrument the completion script and give it a way for us to tell
what (subset of) subcommands we are going to ship.
Also add a test to "git --help <prefix><TAB>" expansion. It needs
to show not just commands but some selected documentation pages.
Based on an idea by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
When commit d8b45314 began separating the zsh completion from the bash
completion, it introduced a zsh completion "bridge" section into the bash
completion script for zsh users to use until they migrated to the zsh
script. The zsh '+=()' append-to-array notation prevents bash 3.00.15 on
CentOS 4.x from loading the completion script and breaks test 9902. We can
easily work around this by using standard Bash array notation.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An internal ls-tree call made by completion code only to probe if
a path exists in the tree recorded in a commit object leaked error
messages when the path is not there. It is not an error at all and
should not be shown to the end user.
* ds/completion-silence-in-tree-path-probe:
git-completion.bash: silence "not a valid object" errors
Remove instructions for old vim support, which is better described
in the upstream vim documentation.
* jn/maint-trim-vim-contrib:
contrib/vim: simplify instructions for old vim support
Update tcsh command line completion so that an unwanted space is
not added to a single directory name.
* mk/complete-tcsh:
Prevent space after directories in tcsh completion
This conforms to RFC3834 and is useful in preventing eg
vacation auto-responders from replying by default
Signed-off-by: Chris Hiestand <chiestand@salk.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since command line options have higher priority than config file
variables and taking previous commit into account, we need a way
how to specify myers algorithm on command line. However,
inventing `--myers` is not the right answer. We need far more
general option, and that is `--diff-algorithm`.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some users or projects prefer different algorithms over others, e.g.
patience over myers or similar. However, specifying appropriate
argument every time diff is to be used is impractical. Moreover,
creating an alias doesn't play nicely with other tools based on diff
(git-show for instance). Hence, a configuration variable which is able
to set specific algorithm is needed. For now, these four values are
accepted: 'myers' (which has the same effect as not setting the config
variable at all), 'minimal', 'patience' and 'histogram'.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, when changing and committing an executable file, the file
would loose its executable bit on the hg side. Likewise, symlinks ended
up as "normal" files". This was not immediately apparent on the git side
unless one did a fresh clone.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial might convert the URL to something more appropriate, like an
absolute path. Lets store that instead of the original URL, which won't
work from a different working directory if it's relative.
Suggested-by: Max Horn <max@quendi.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though --patience was already there, we missed --minimal and
--histogram for some reason.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-completion.bash script did not implemented full, git aware,
support to complete paths, for git commands that operate on files within
the current working directory or the index.
As an example:
git add <TAB>
will suggest all files in the current working directory, including
ignored files and files that have not been modified.
Support path completion, for git commands where the non-option arguments
always refer to paths within the current working directory or the index,
as follows:
* the path completion for the "git rm" and "git ls-files"
commands will suggest all cached files.
* the path completion for the "git add" command will suggest all
untracked and modified files. Ignored files are excluded.
* the path completion for the "git clean" command will suggest all
untracked files. Ignored files are excluded.
* the path completion for the "git mv" command will suggest all cached
files when expanding the first argument, and all untracked and cached
files for subsequent arguments. In the latter case, empty directories
are included and ignored files are excluded.
* the path completion for the "git commit" command will suggest all
files that have been modified from the HEAD, if HEAD exists, otherwise
it will suggest all cached files.
For all affected commands, completion will always stop at directory
boundary. Only standard ignored files are excluded, using the
--exclude-standard option of the ls-files command.
When using a recent Bash version, Git path completion will be the same
as builtin file completion, e.g.
git add contrib/
will suggest relative file names.
Signed-off-by: Manlio Perillo <manlio.perillo@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Trying to complete the command
git show master:./file
would cause a "Not a valid object name" error to be output on standard
error. Silence the error so it won't appear on the command line.
Signed-off-by: Dylan Smith <dylan.ah.smith@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rely on the upstream filetype.vim instead of duplicating its rules in
git's instructions for syntax highlighting support on pre-7.2 vim
versions.
The result is a shorter contrib/vim/README. More importantly, it lets
us punt on maintenance of the autocmd rules.
So now when we fix the upstream gitsendemail rule in light of commit
eed6ca7, new git users stuck on old vim reading contrib/vim/README can
automagically get the fix without any further changes needed to git.
Once the world has moved on to vim 7.2+ completely, we can get rid of
these instructions, but for now if they are this simple it's
effortless to keep them.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New remote helper for bzr, with minimum fix squashed in.
* fc/remote-bzr:
remote-bzr: detect local repositories
remote-bzr: add support for older versions of bzr
remote-bzr: add support to push special modes
remote-bzr: add support for fecthing special modes
remote-bzr: add simple tests
remote-bzr: update working tree upon pushing
remote-bzr: add support for remote repositories
remote-bzr: add support for pushing
Add new remote-bzr transport helper
Some python scripts we ship cannot be run with older versions of the
interpreter.
* er/python-version-requirements:
Add checks to Python scripts for version dependencies.
If git-completion.bash returns a single directory as a completion,
tcsh will automatically add a space after it, which is not what the
user wants.
This commit prevents tcsh from doing this.
Also, a check is added to make sure the tcsh version used is recent
enough to allow completion to work as expected.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So we don't create a clone unnecessarily.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The optional third parameter when __git_ps1 is used in
PROMPT_COMMAND mode as format string for printf to further
customize the way the git status string is embedded in the
user's PS1 prompt.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various entries in our .mailmap file.
* jk/mailmap-cleanup:
contrib: update stats/mailmap script
.mailmap: normalize emails for Linus Torvalds
.mailmap: normalize emails for Jeff King
.mailmap: fix broken entry for Martin Langhoff
.mailmap: match up some obvious names/emails
The "-c" and "-C" options take an existing commit, so let's
complete refs, just as we would for --squash or --fixup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A 'git push' doesn't update the working directory on the remote, but
a 'bzr push' does. Teach the remote helper for bzr to update the
working tree on the bzr side upon pushing via the "export" command.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This version changes quite a few things:
1. The original parsed the mailmap file itself, and it did
it wrong (it did not understand entries with an extra
email key).
Instead, this version uses git's "%aE" and "%aN"
formats to have git perform the mapping, meaning we do
not have to read .mailmap at all, but still operate on
the current state that git sees (and it also works
properly from subdirs).
2. The original would find multiple names for an email,
but not the other way around.
This version can do either or both. If we find multiple
emails for a name, the resolution is less obvious than
the other way around. However, it can still be a
starting point for a human to investigate.
3. The original would order only by count, not by recency.
This version can do either. Combined with showing the
counts, it can be easier to decide how to resolve.
4. This version shows similar entries in a blank-delimited
stanza, which makes it more clear which options you are
picking from.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of __git_ps1 function operating in two-arg mode was
not very clear. It said "set PROMPT_COMMAND=__git_ps1" which is not
the right usage for this mode, followed by "To customize the prompt,
do this", giving a false impression that those who do not want to
customize it can get away with no-arg form, which was incorrect.
Make it clear that this mode always takes two arguments, pre and
post, with an example.
The straight-forward one should be listed as the primary usage, and
the confusing one should be an alternate for advanced users. Swap
the order of these two.
Acked-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For bash completion, the option '-o bashdefault' is used to indicate
that when no other choices are available, file completion should be
performed. Since this option is not available in tcsh, no file
completion is ever performed. Therefore, commands like 'git add ',
'git send-email ', etc, require the user to manually type out
the file name. This can be quite annoying.
To improve the user experience we try to simulate file completion
directly in this script (although not perfectly).
The known issues with the file completion simulation are:
- Possible completions are shown with their directory prefix.
- Completions containing shell variables are not handled.
- Completions with ~ as the first character are not handled.
Signed-off-by: Marc Khouzam <marc.khouzam@ericsson.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
GIT_PS1_DESCRIBE_STYLE was introduced in v1.6.3.2~35. Document it in the
header comments.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New remote helper for hg.
* fc/remote-hg: (22 commits)
remote-hg: fix for older versions of python
remote-hg: fix for files with spaces
remote-hg: avoid bad refs
remote-hg: try the 'tip' if no checkout present
remote-hg: fix compatibility with older versions of hg
remote-hg: add missing config for basic tests
remote-hg: the author email can be null
remote-hg: add option to not track branches
remote-hg: add extra author test
remote-hg: add tests to compare with hg-git
remote-hg: add bidirectional tests
test-lib: avoid full path to store test results
remote-hg: add basic tests
remote-hg: fake bookmark when there's none
remote-hg: add compat for hg-git author fixes
remote-hg: add support for hg-git compat mode
remote-hg: match hg merge behavior
remote-hg: make sure the encoding is correct
remote-hg: add support to push URLs
remote-hg: add support for remote pushing
...
A mediawiki page can contain, and even start with a " character, we have
to escape it when generating the fast-export stream, as well as \
character. While we're there, also escape newlines, but I don't think we
can get them from MediaWiki pages.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the user might get something like:
git-completion.sh:2466: command not found: compdef
If this script is loaded before compinit. The script would work either
way, but let's not be more annoying to the user.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Strictly speaking bzr doesn't need any changes to interact with remote
repositories, but it's dead slow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As Amit Bakshi reported, older versions of python (< 2.7) don't have
subprocess.check_output, so let's use subprocess.Popen directly as
suggested.
Suggested-by: Amit Bakshi <ambakshi@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tcsh users sometimes alias the 'git' command to another name. In
this case, the user expects to only have to issue a new 'complete'
command using the alias name.
However, the tcsh script currently uses the command typed by the
user to call the appropriate function in git-completion.bash, either
_git() or _gitk(). When using an alias, this technique no longer
works.
This change specifies the real name of the command (either 'git' or
'gitk') as a parameter to the script handling tcsh completion. This
allows the user to use any alias for the 'git' or 'gitk' commands,
while still getting completion to work.
A check for the presence of ${HOME}/.git-completion.bash is also
added to help the user make use of the script properly.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
when trying 'M-x git-status' in a submodule created with recent (1.7.5+)
git, the command fails with
| ... is not a git working tree
This is caused by creating submodules with '--separate-git-dir' but
still checking for a working tree by testing for a '.git' directory.
The patch fixes this by relaxing the existing detection a little bit.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can be presented with invalid completion results
when trying to complete a 'git checkout' command. This can happen
when using a branch name prefix that matches multiple remote branches.
For example, if available branches are:
master
remotes/GitHub/maint
remotes/GitHub/master
remotes/origin/maint
remotes/origin/master
When performing completion on 'git checkout ma' the user will be
given the choices:
maint
master
However, 'git checkout maint' will fail in this case, although
completion previously said 'maint' was valid. Furthermore, when
performing completion on 'git checkout mai', no choices will be
suggested. So, the user is first told that the branch name
'maint' is valid, but when trying to complete 'mai' into 'maint',
that completion is no longer valid.
The completion results should never propose 'maint' as a valid
branch name, since 'git checkout' will refuse it.
The reason for this bug is that the uniq program only
works with sorted input. The man page states
"uniq prints the unique lines in a sorted file".
When __git_refs uses the guess heuristic employed by checkout for
tracking branches it wants to consider remote branches but only if
the branch name is unique. To do that, it calls 'uniq -u'. However
the input given to 'uniq -u' is not sorted.
Therefore, in the above example, when dealing with 'git checkout ma',
"__git_refs '' 1" will find the following list:
master
maint
master
maint
master
which, when passed to 'uniq -u' will remain the same. Therefore
'maint' will be wrongly suggested as a valid option.
When dealing with 'git checkout mai', the list will be:
maint
maint
which happens to be sorted and will be emptied by 'uniq -u',
properly ignoring 'maint'.
A solution for preventing the completion script from suggesting
such invalid branch names is to first call 'sort' and then 'uniq -u'.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updates __git_ps1 so that it can be used as $PROMPT_COMMAND,
instead of being used for command substitution in $PS1, to embed
color escape sequences in its output.
* so/prompt-command:
coloured git-prompt: paint detached HEAD marker in red
Fix up colored git-prompt
show color hints based on state of the git tree
Allow __git_ps1 to be used in PROMPT_COMMAND
Zsh's bash completion emulation is buggy, not properly maintained, and
we have some workarounds in place for different bugs that appeared in
various versions.
Since I'm the only one that has worked on that code lately[1], it might make
snese to use the code I wrote specifically for git.
The advantages are:
1) Less workarounds
* No need to hack __get_comp_words_by_ref
* No need to hack IFS or words
2) Improved features
* 'git show master' now properly adds a space at the end (IFS bug)
* 'git checkout --conflict=' now properly returns the sub-items
(missing feature)
3) Consolidated code
* It's all now in a single chunk, and it's basically the same as
git-completion.zsh
Since there's some interest in moving the zsh-specific code out of this
script, lets go ahead and warn the users that they should be using
git-completion.zsh.
[1] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=history;f=Completion/bashcompinit
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems there's always issues with zsh's bash completion emulation.
I've tried to fix as many as I could[1], and most of the fixes are already
in the latest version of zsh, but still, there are issues.
There is no point going through all that pain; the emulation is easy to
achieve, and this patch works better than zsh's bash completion
emulation.
[1] http://zsh.git.sourceforge.net/git/gitweb.cgi?p=zsh/zsh;a=commitdiff;h=23907bb840c80eef99eabba17e086e44c9b2d3fc
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current tcsh-completion support for Git, as can be found on the
Internet, takes the approach of defining the possible completions
explicitly. This has the obvious draw-back to require constant
updating as the Git code base evolves.
The approach taken by this commit is to to re-use the advanced bash
completion script and use its result for tcsh completion. This is
achieved by sourcing the bash script and outputting the completion
result for tcsh consumption.
Three solutions were looked at to implement this approach with (C)
being retained:
A) Modifications:
git-completion.bash and new git-completion.tcsh
Modify the existing git-completion.bash script to support
being sourced using bash (as now), but also executed using bash.
When being executed, the script will output the result of the
computed completion to be re-used elsewhere (e.g., in tcsh).
The modification to git-completion.bash is made not to be
tcsh-specific, but to allow future users to also re-use its
output. Therefore, to be general, git-completion.bash accepts a
second optional parameter, which is not used by tcsh, but could
prove useful for other users.
Pros:
1- allows the git-completion.bash script to easily be re-used
2- tcsh support is mostly isolated in git-completion.tcsh
Cons (for tcsh users only):
1- requires the user to copy both git-completion.tcsh and
git-completion.bash to ${HOME}
2- requires bash script to have a fixed name and location:
${HOME}/.git-completion.bash
B) Modifications:
git-completion.bash
Modify the existing git-completion.bash script to support
being sourced using bash (as now), but also executed using bash,
and sourced using tcsh.
Pros:
1- only requires the user to deal with a single file
2- maintenance more obvious for tcsh since it is entirely part
of the same git-completion.bash script.
Cons:
1- tcsh support could affect bash support as they share the
same script
2- small tcsh section must use syntax suitable for both tcsh
and bash and must be at the beginning of the script
3- requires script to have a fixed name and location:
${HOME}/.git-completion.sh (for tcsh users only)
C) Modifications:
New git-completion.tcsh
Provide a short tcsh script that generates another script
which extends git-completion.bash. This new script can be
used by tcsh to perform completion.
Pros:
1- tcsh support is entirely isolated in git-completion.tcsh
2- new tcsh script can be as complex as needed
Cons (for tcsh users only):
1- requires the user to copy both git-completion.tcsh and
git-completion.bash to ${HOME}
2- requires bash script to have a fixed name and location:
${HOME}/.git-completion.bash
3- sourcing the new script will generate a third script
Approach (C) was selected avoid any modification to git-completion.bash.
Signed-off-by: Marc Khouzam <marc.khouzam@gmail.com>
Reviewed-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The list of all git commands is computed from the output of 'git help
-a', which already includes 'help', so there is no need to explicitly
add it once more when computing the list of porcelain commands.
Note that 'help' wasn't actually offered twice because of this,
because Bash filters duplicates from possible completion words.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Turns out fast-export throws bad 'reset' commands because of a behavior
in transport-helper that is not even needed.
Either way, better to ignore them, otherwise the user will get warnings
when we OK them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
There's no concept of HEAD in mercurial, but let's try our best to do
something sensible.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Turns out repo.revs was introduced quite late, and it doesn't do
anything fancy for our refspec; only list all the numbers in that range.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
'hg commit' fails otherwise in some versions of mercurial because of
the missing user information. Other versions simply throw a warning and
guess though.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Some people prefer it this way.
% git config --global remote-hg.track-branches false
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
The base commands come from the tests of the hg-git project.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Base commands from hg-git tests:
https://bitbucket.org/durin42/hg-git/src
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
A GSoC project.
* fa/remote-svn:
Add a test script for remote-svn
remote-svn: add marks-file regeneration
Add a svnrdump-simulator replaying a dump file for testing
remote-svn: add incremental import
remote-svn: Activate import/export-marks for fast-import
Create a note for every imported commit containing svn metadata
vcs-svn: add fast_export_note to create notes
Allow reading svn dumps from files via file:// urls
remote-svn, vcs-svn: Enable fetching to private refs
When debug==1, start fast-import with "--stats" instead of "--quiet"
Add documentation for the 'bidi-import' capability of remote-helpers
Connect fast-import to the remote-helper via pipe, adding 'bidi-import' capability
Add argv_array_detach and argv_array_free_detached
Add svndump_init_fd to allow reading dumps from arbitrary FDs
Add git-remote-testsvn to Makefile
Implement a remote helper for svn in C
Paint the marker for normal state in green and detached state
in red, instead of the other way around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The main point is to match the colors to be more close to the color
output of "git status -sb".
- the branchname is green, or in red when the HEAD is detached;
- the flags are either red or green for unstaged/staged and the
remaining flags get a different color or none at all.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By setting GIT_PS1_SHOW_COLORHINTS when using __git_ps1
as PROMPT_COMMAND, you will get color hints in addition to
a different character (*+% etc.) to indicate the state of
the tree.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes __git_ps1 to allow its use as PROMPT_COMMAND in bash
in addition to setting PS1 with __git_ps1 in a command substitution.
PROMPT_COMMAND has advantages for using color without running
into prompt-wrapping issues. Only by assigning \[ and \] to PS1
directly can bash know that these and the enclosed zero-width codes in
between don't count in the length of the prompt.
Signed-off-by: Simon Oosthoek <s.oosthoek@xs4all.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
