Since commit 55218("checkout: do not lose staged removal"), in
cmd_add/cmd_update, "git checkout <commit>" following
"git clone -n" may fail if <commit> is different from HEAD.
So Use "git checkout -f <commit>" to fix this.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When running git submodule update -i, the "-i" is shifted before recursing
into cmd_init and then again outside of the loop. This causes some /bin/sh
to complain about shifting when there are no arguments left (and would
discard anything written after -i too).
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding a new submodule in place, meaning the user created the
submodule as a git repo in the superproject's tree first, we don't go
through "git submodule init" to register the module. Thus, the
submodule's origin repository URL is not stored in .git/config, and no
subsequent submodule operation will ever do so. In this case, assume the
URL the user supplies to "submodule add" is the one that should be
registered, and do so.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change makes "submodule add" much more strict in the arguments it
takes, and is intended to address confusion as recently noted on the
git-list. With this change, the required syntax is:
$ git submodule add URL path
Specifically, this eliminates the form
$ git submodule add URL
which was confused by more than one person as
$ git submodule add path
With this patch, the URL locating the submodule's origin repository can be
either an absolute URL, or (if it begins with ./ or ../) can express the
submodule's repository location relative to the superproject's origin.
This patch also eliminates a third form of URL, which was relative to the
superproject's top-level directory (not its repository). Any URL that was
neither absolute nor matched ./*|../* was assumed to point to a
subdirectory of the superproject as the location of the submodule's origin
repository. This URL form was confusing and does not seem to correspond
to an important use-case. Specifically, no-one has identified the need to
clone from a repository already in the superproject's tree, but if this is
needed it is easily done using an absolute URL: $(pwd)/relative-path. So,
no functionality is lost with this patch. (t6008-rev-list-submodule.sh did
rely upon this relative URL, fixed by using $(pwd).)
Following this change, there are exactly four variants of
submodule-add, as both arguments have two flavors:
URL can be absolute, or can begin with ./|../ and thus names the
submodule's origin relative to the superproject's origin.
Note: With this patch, "submodule add" discerns an absolute URL as
matching /*|*:*: e.g., URL begins with /, or it contains a :. This works
for all valid URLs, an absolute path in POSIX, as well as an absolute path
on Windows).
path can either already exist as a valid git repo, or will be cloned from
the given URL. The first form here eases creation of a new submodule in
an existing superproject as the submodule can be added and tested in-tree
before pushing to the public repository. However, the more usual form is
the second, where the repo is cloned from the given URL.
This specifically addresses the issue of
$ git submodule add a/b/c
attempting to clone from a repository at "a/b/c" to create a new module
in "c". This also simplifies description of "relative URL" as there is now
exactly *one* form: a URL relative to the parent's origin repo.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule add would trip if path to the submodule included a space,
or if its .git was a gitdir: link to a GIT_DIR kept elsewhere. Fix both.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule was invoking "die" from within resolve-relative-url, but
this does not actually cause the script to exit. Fix this by returning
the error to the caller and have the caller exit.
While we're at it, clean up the quoting on invocation of
resolve_relative_url as it was wrong.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behaviour of "sed" on an incomplete line is unspecified by POSIX, and
On Solaris it apparently fails to process input that doesn't end in a LF.
Consequently constructs like
re=$(printf '%s' foo | sed -e 's/bar/BAR/g' $)
cause re to be set to the empty string. Such a construct is used in
git-submodule.sh.
Because the LF at the end of command output are stripped away by the
command substitution, it is a safe and sane change to add a LF at the end
of the printf format specifier.
Signed-off-by: Chris Ridd <chris.ridd@isode.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a submodule is not initialized and you do not want to change the
defaults from .gitmodules anyway, you can now say
$ git submodule update --init <name>
When "update" is called without --init on an uninitialized submodule,
a hint to use --init is printed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git config' has a '-f' option that takes the file to parse.
Using it rather than the environment variable seems more logical
and simplified.
Signed-off-by: Imran M Yousuf <imyousuf@smartitengineering.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* lh/git-file:
Teach GIT-VERSION-GEN about the .git file
Teach git-submodule.sh about the .git file
Teach resolve_gitlink_ref() about the .git file
Add platform-independent .git "symlink"
This changes the search logic for describing a submodule from:
- annotated tag
- any tag
- tag on a subsequent commit
- commit id
to
- annotated tag
- any tag
- tag on a subsequent commit
- local or remote branch
- commit id
The change is describing with respect to a branch before falling
back to the commit id. By itself, git-submodule will maintain submodules
as headless checkouts without ever making a local branch. In
general, such heads can always be described relative to the remote branch
regardless of existence of tags, and so provides a better fallback
summary than just the commit id.
This requires inserting an extra describe step as --contains is
incompatible with --all, but the latter can be used with --always
to fall back to a commit ID. Also, --contains implies --tags, so the
latter is not needed.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --for-status option is mainly used by builtin-status/commit.
It adds 'Modified submodules:' line at top and '# ' prefix to all
following lines.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git submodule status" command tries to show the name of the
submodule HEAD revision more descriptively, but the submodule
repository lacked a suitable tag to do so, it leaked "fatal: cannot
describe" message to the UI. Squelch it by using '--always'.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-submodule tries to detect 'active' submodules, it checks for the
existence of a directory named '.git'. This isn't good enough now that .git
can be a file pointing to the real $GIT_DIR so the tests are changed to
reflect this.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/portable:
t6000lib: re-fix tr portability
t7505: use SHELL_PATH in hook
t9112: add missing #!/bin/sh header
filter-branch: use $SHELL_PATH instead of 'sh'
filter-branch: don't use xargs -0
add NO_EXTERNAL_GREP build option
t6000lib: tr portability fix
t4020: don't use grep -a
add test_cmp function for test scripts
remove use of "tail -n 1" and "tail -1"
grep portability fix: don't use "-e" or "-q"
more tr portability test script fixes
t0050: perl portability fix
tr portability fixes
System V versions of grep (such as Solaris /usr/bin/grep)
don't understand either of these options. git's usage of
"grep -e pattern" fell into one of two categories:
1. equivalent to "grep pattern". -e is only useful here if
the pattern begins with a "-", but all of the patterns
are hardcoded and do not begin with a dash.
2. stripping comments and blank lines with
grep -v -e "^$" -e "^#"
We can fortunately do this in the affirmative as
grep '^[^#]'
Uses of "-q" can be replaced with redirection to /dev/null.
In many tests, however, "grep -q" is used as "if this string
is in the expected output, we are OK". In this case, it is
fine to just remove the "-q" entirely; it simply makes the
"verbose" mode of the test slightly more verbose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We print the number of commits in parentheses, but without this change
we would get an oddly looking line like this:
* sm1 4c8d358...41fbea9 ( 4):
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch teaches git-submodule an option '--summary-limit|-n <number>'
to limit number of commits in total for the summary of each submodule in
the modified case (only a single commit is shown in other cases).
Giving 0 will disable the summary; a negative number means unlimted, which
is the default.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch does the hard work to show submodule commit summary.
For a modified submodule, a series of commits will be shown with
the following command:
git log --pretty='format:%m %s' \
--first-parent sha1_src...sha1_dst
where the sha1_src is from the given super project commit and the
sha1_dst is from the index or working tree (switched by --cached).
For a deleted, added, or typechanged (blob<->submodule) submodule,
only one single newest commit from the existing end (for example,
src end for submodule deleted or type changed from submodule to blob)
will be shown.
If the src/dst sha1 for a submodule is missing in the submodule
directory, a warning will be issued except in two cases where the
submodule directory is deleted (type 'D') or typechanged to blob
(one case of type 'T').
In the title line for a submodule, the src/dst sha1 and the number
of commits (--first-parent) between the two commits will be shown.
The following example demonstrates most cases.
Example: commit summary for modified submodules sm1-sm5.
--------------------------------------------
$ git submodule summary
* sm1 354cd45...3f751e5 (4):
< one line message for C
< one line message for B
> one line message for D
> one line message for E
* sm2 5c8bfb5...000000 (3):
< one line message for F
* sm3 354cd45...3f751e5:
Warn: sm3 doesn't contain commit 354cd45
* sm4 354cd34(submodule)-> 235efa(blob) (1):
< one line message for G
* sm5 354cd34(blob)-> 235efa(submodule) (5):
> one line message for H
--------------------------------------------
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These patches teach git-submodule a new subcommand 'summary' to show
commit summary of checked out submodules between a given super project
commit (defaults to HEAD) and working tree (or index, when --cached is
given).
This patch just introduces the framework to find submodules which have
summary to show. A submodule will have summary if it falls into these
cases:
- type 'M': modified and checked out (1)
- type 'A': added and checked out (2)
- type 'D': deleted
- type 'T': typechanged (blob <-> submodule)
Notes:
1. There may be modified but not checked out cases. In the case of a
merge conflict, even if the submodule is not checked out, there may
be still a diff between index and HEAD on the submodule entry
(i.e. modified). The summary will not be show for such a submodule.
2. A similar explanation applies to the added but not checked out case.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working in the top-level project, it is useful to create a new
submodule as a git repo in a subdirectory, then add that submodule to
the top-level in place.
This patch allows "git submodule add <intended url> subdir" to add the
existing subdir to the current project. The presumption is the user will
later push / clone the subdir to the <intended url> so that future
submodule init / updates will work.
Absent this patch, "git submodule add" insists upon cloning the subdir
from a repository at the given url, which is fine for adding an existing
project in, but less useful when adding a new submodule from scratch to an
existing project. The former functionality remains, and the clone is
attempted if the subdir does not already exist as a valid git repo.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix typo in 'test -z "url"' when checking whether a submodule url is
empty. "url" should be "$url".
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The subcommand parser of "git submodule" made its subcommand
names reserved words. As a consequence, a command like this:
$ git submodule add init update
which is meant to add a submodule called 'init' at path 'update'
was misinterpreted as a request to invoke more than one mutually
incompatible subcommands and incorrectly rejected.
This patch fixes the issue by stopping the subcommand parsing at
the first subcommand word, to allow the sample command line
above to work as expected.
It also introduces the usual -- option disambiguator, so that a
submodule at path '-foo' can be updated with
$ git submodule update -- -foo
without triggering an "unrecognized option -foo" error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This renames the shell functions used in git-submodule that
implement top-level subcommands. The rule is that the
subcommand $foo is implemented by cmd_$foo function.
A noteworthy change is that modules_list() is now known as
cmd_status(). There is no "submodule list" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX says that exit status "0" means that "unset" successfully unset
the variable. However, it is kind of ambiguous if an environment
variable which was not set could be successfully unset.
At least the default shell on HP-UX insists on reporting an error in
such a case, so just ignore the exit status of "unset".
[Dscho: extended the patch to git-submodule.sh, as Junio realized that
this is the only other place where we check the exit status of "unset".]
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When escaping a string to be used as a sed regex, it is important
to only escape active characters. Escaping other characters is
undefined according to POSIX, and in practice leads to issues with
extensions such as GNU sed's \+.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--text follows this line--
These commands currently lack OPTIONS_SPEC; allow people to
easily list with "git grep 'OPTIONS_SPEC=$'" what they can help
improving.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, a non-path URL gets lost before the clone.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a subproject's location to be specified and stored as relative
to the parent project's location (e.g., ./foo, or ../foo). This url is
stored in .gitmodules as given. It is resolved into an absolute url by
appending it to the parent project's url when the information is written
to .git/config (i.e., during submodule add for the originator, and
submodule init for a downstream recipient). This allows cloning of the
project to work "as expected" if the project is hosted on a different
server than when the subprojects were added.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was broken as part of ecda072380.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to find a more descriptive name given a commit in a
submodule were improved in bffe71f, but it forgot to remove the
older logic the patch replaced.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"module_name $path" function wants to look up a configuration
variable "submodule.<modulename>.path" whose value is $path, and
return the <modulename> found. "git-config --get-regexp" is the
natural thing to use for this, but (1) its value matching has an
unfortunate "feature" that takes leading '!' specially, and (2)
its output needs to be parsed with sed to extract <modulename>
part anyway.
This changes the call to "git-config --get-regexp" not to use
the value-regexp part, and moves the "pick the one whose value
is $path" part to the downstream sed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some repositories might not use/have annotated tags (for example the
ones created with git-cvsimport) and git-submodule status might fail
because git-describe might fail to find a tag. This change allows the
status of a submodule to be described/displayed relative to lightweight
tags as well.
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make a submodule effectively usable, the path and
a URL where the submodule can be cloned need to be stored
in .gitmodules. This subcommand takes care of setting
this information after cloning the new submodule.
Only the index is updated, so, if needed, the user may still
change the URL or switch to a different branch of the submodule
before committing.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the way git-submodule uses .gitmodules: Subsections no longer
specify the submodule path, they now specify the submodule name. The
submodule path is found under the new key "submodule.<name>.path", which is
a required key.
With this change a submodule can be moved between different 'checkout paths'
without upsetting git-submodule.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename [module] to [submodule], so that it would be more
forward compatible with the proposed extension by harmonizing
the section names used in .gitmodules and .git/config.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After the initial clone of a submodule, no files would be checked out in
the submodule directory if the submodule HEAD was equal to the SHA-1
specified in the index of the containing repository. This fixes the problem
by simply ignoring submodule HEAD for a fresh clone.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches 'git-submodule init' to register submodule paths and urls in
.git/config instead of actually cloning them. The cloning is now handled
as part of 'git-submodule update'.
With this change it is possible to specify preferred/alternate urls for
the submodules in .git/config before the submodules are cloned.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is just a simple refactoring of modules_init() with no change in
functionality.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command can be used to initialize, update and inspect submodules. It
uses a .gitmodules file, readable by git-config, in the top level directory
of the 'superproject' to specify a mapping between submodule paths and
repository url.
Example .gitmodules layout:
[module "git"]
url = git://git.kernel.org/pub/scm/git/git.git
With this entry in .gitmodules (and a commit reference in the index entry for
the path "git"), the command 'git submodule init' will clone the repository
at kernel.org into the directory "git".
Known issues
============
There is currently no way to override the url found in the .gitmodules file,
except by manually creating the subproject repository. The place to fix this
in the script has a rather long comment about a possible plan.
Funny paths will be quoted in the output from git-ls-files, but git-submodule
does not attempt to unquote (or even detect the presence of) such paths.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
