"git send-email" when using in a batched mode that limits the
number of messages sent in a single SMTP session lost the contents
of the variable used to choose between tls/ssl, unable to send the
second and later batches, which has been fixed.
* jm/send-email-tls-auth-on-batch:
send-email: fix tls AUTH when sending batch
The variable smtp_encryption must keep it's value between two batches.
Otherwise the authentication is skipped after the first batch.
Signed-off-by: Jules Maselbas <jules.maselbas@grenoble-inp.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email, when invoked without a --transfer-encoding option, sends
8bit data without a MIME version or a transfer encoding. This has
several downsides.
First, unless the transfer encoding is specified, it defaults to 7bit,
meaning that non-ASCII data isn't allowed. Second, if lines longer than
998 bytes are used, we will send an message that is invalid according to
RFC 5322. The --validate option, which is the default, catches this
issue, but it isn't clear to many people how to resolve this.
To solve these issues, default the transfer encoding to "auto", so that
we explicitly specify 8bit encoding when lines don't exceed 998 bytes
and quoted-printable otherwise. This means that we now always emit
Content-Transfer-Encoding and MIME-Version headers, so remove the
conditionals from this portion of the code.
It is unlikely that the unconditional inclusion of these two headers
will affect the deliverability of messages in anything but a positive
way, since MIME is already widespread and well understood by most email
programs.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With --validate (which is the default), we warn about lines exceeding
998 characters due to the limits specified in RFC 5322. However, if
we're using a suitable transfer encoding (quoted-printable or base64),
we're guaranteed not to have lines exceeding 76 characters, so there's
no need to fail in this case. The auto transfer encoding handles this
specific case, so accept it as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For most patches, using a transfer encoding of 8bit provides good
compatibility with most servers and makes it as easy as possible to view
patches. However, there are some patches for which 8bit is not a valid
encoding: RFC 5322 specifies that a message must not have lines
exceeding 998 octets.
Add a transfer encoding value, auto, which indicates that a patch should
use 8bit where allowed and quoted-printable otherwise. Choose
quoted-printable instead of base64, since base64-encoded plain text is
treated as suspicious by some spam filters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" can sometimes offer confirmation dialog "Send this
email?" with choices 'Yes', 'No', 'Quit', and 'All'. A new action
'Edit' has been added to this dialog's choice.
* dd/send-email-reedit:
git-send-email: allow re-editing of message
When shown the email summary, an opportunity is presented for the user
to edit the email as if they had specified --annotate. This also permits
them to edit it multiple times.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Helped-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case a patch already has In-Reply-To or References in the header
(e.g. when the patch has been created with format-patch --thread)
git-send-email should not add another pair of those headers.
This is also not allowed according to RFC 5322 Section 3.6:
https://tools.ietf.org/html/rfc5322#section-3.6
Avoid the second pair by reading the current headers into the
appropriate variables.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clean-up to various pieces of Perl code we have.
* ab/perl-fixes:
perl Git::LoadCPAN: emit better errors under NO_PERL_CPAN_FALLBACKS
Makefile: add NO_PERL_CPAN_FALLBACKS knob
perl: move the perl/Git/FromCPAN tree to perl/FromCPAN
perl: generalize the Git::LoadCPAN facility
perl: move CPAN loader wrappers to another namespace
perl: update our copy of Mail::Address
perl: update our ancient copy of Error.pm
git-send-email: unconditionally use Net::{SMTP,Domain}
Git.pm: hard-depend on the File::{Temp,Spec} modules
gitweb: hard-depend on the Digest::MD5 5.8 module
Git.pm: add the "use warnings" pragma
Git.pm: remove redundant "use strict" from sub-package
perl: *.pm files should not have the executable bit
"git send-email" learned to complain when the batch-size option is
not defined when the relogin-delay option is, since these two are
mutually required.
* xz/send-email-batch-size:
send-email: error out when relogin delay is missing
In some projects contributions from groups are only accepted from a
common group email address. But every individual may want to receive
replies to her own personal address. That's what we have 'Reply-To'
headers for in SMTP. So introduce an optional '--reply-to' command
line option.
This patch re-uses the $reply_to variable. This could break
out-of-tree patches!
Signed-off-by: Christian Ludwig <chrissicool@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SMTP protocol has both, the 'Reply-To' and the 'In-Reply-To' header
fields. We only use the latter. To avoid confusion, rename the variable
for it.
Signed-off-by: Christian Ludwig <chrissicool@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the Git::Error and Git::Mail::Address wrappers to the
Git::LoadCPAN::Loader::* namespace, e.g. Git::LoadCPAN::Error. That
module will then either load Error from CPAN (if installed on the OS),
or use Git::FromCPAN::Error.
When I added the Error wrapper in 20d2a30f8f ("Makefile: replace
perl/Makefile.PL with simple make rules", 2017-12-10) I didn't think
about how confusing it would be to have these modules sitting in the
same tree as our normal modules. Let's put these all into
Git::{Load,From}CPAN::* to clearly distinguish them from the rest.
This also makes things a bit less confusing since there was already a
Git::Error namespace ever since 8b9150e3e3 ("Git.pm: Handle failed
commands' output", 2006-06-24).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Net::SMTP and Net::Domain were both first released with perl
v5.7.3[1], since my d48b284183 ("perl: bump the required Perl version
to 5.8 from 5.6.[21]", 2010-09-24) we've depended on 5.8, so there's
no reason to conditionally require them anymore.
This conditional loading was initially added in
87840620fd ("send-email: only 'require' instead of 'use' Net::SMTP",
2006-06-01) for Net::SMTP and 134550fe21 ("git-send-email.perl - try
to give real name of the calling host to HELO/EHLO", 2010-03-14) for
Net::Domain, both of which predate the hard dependency on 5.8.
Since they're guaranteed to be installed now let's "use" them
instead. The cost of loading them both is trivial given what
git-send-email does (~15ms on my system), and it's better to not defer
any potential loading errors until runtime.
This patch is better viewed with -w, which shows that the only change
in the last two hunks is removing the "if eval" wrapper block.
1. $ parallel 'corelist {}' ::: Net::{SMTP,Domain}
Data for 2015-02-14
Net::SMTP was first released with perl v5.7.3
Data for 2015-02-14
Net::Domain was first released with perl v5.7.3
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The build procedure for perl/ part has been greatly simplified by
weaning ourselves off of MakeMaker.
* ab/simplify-perl-makefile:
perl: treat PERLLIB_EXTRA as an extra path again
perl: avoid *.pmc and fix Error.pm further
Makefile: replace perl/Makefile.PL with simple make rules
When the batch size is neither configured nor given on the command
line, but the relogin delay is given, then the current code ignores
the relogin delay setting.
This is unsafe as there was some intention when setting the batch size.
One workaround would be to just assume a batch size of 1 as a default.
This however may be bad UX, as then the user may wonder why it is sending
slowly without apparent batching.
Error out for now instead of potentially confusing the user.
As 5453b83bdf (send-email: --batch-size to work around some SMTP
server limit, 2017-05-21) lays out, we rather want to not have this
interface anyway and would rather want to react on the server throttling
dynamically.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to have two versions of the email parsing code. Our
parse_mailboxes (in Git.pm), and Mail::Address which we used if
installed. Unfortunately, both versions have different sets of bugs, and
changing the behavior of git depending on whether Mail::Address is
installed was a bad idea.
A first attempt to solve this was cc90750 (send-email: don't use
Mail::Address, even if available, 2017-08-23), but it turns out our
parse_mailboxes is too buggy for some uses. For example the lack of
nested comments support breaks get_maintainer.pl in the Linux kernel
tree:
https://public-inbox.org/git/20171116154814.23785-1-alex.bennee@linaro.org/
This patch goes the other way: use Mail::Address anyway, but have a
local copy from CPAN as a fallback, when the system one is not
available.
The duplicated script is small (276 lines of code) and stable in time.
Maintaining the local copy should not be an issue, and will certainly be
less burden than maintaining our own parse_mailboxes.
Another option would be to consider Mail::Address as a hard dependency,
but it's easy enough to save the trouble of extra-dependency to the end
user or packager.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing code mixes parsing of email header with regular
expression and actual code. Extract the parsing code into a new
subroutine "parse_header_line()". This improves the code readability
and make parse_header_line reusable in other place.
"parsed_header_line()" and "filter_body()" could be used for
refactoring the part of code which parses the header to prepare the
email and send it.
In contrast to the previous version it doesn't keep the header order
and strip duplicate headers.
Signed-off-by: Nathan Payre <nathan.payre@etu.univ-lyon1.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Timothee Albertin <timothee.albertin@etu.univ-lyon1.fr>
Signed-off-by: Daniel Bensoussan <daniel.bensoussan--bohm@etu.univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Matthieu Moy <matthieu.moy@univ-lyon1.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the perl/Makefile.PL and the fallback perl/Makefile used under
NO_PERL_MAKEMAKER=NoThanks with a much simpler implementation heavily
inspired by how the i18n infrastructure's build process works[1].
The reason for having the Makefile.PL in the first place is that it
was initially[2] building a perl C binding to interface with libgit,
this functionality, that was removed[3] before Git.pm ever made it to
the master branch.
We've since since started maintaining a fallback perl/Makefile, as
MakeMaker wouldn't work on some platforms[4]. That's just the tip of
the iceberg. We have the PM.stamp hack in the top-level Makefile[5] to
detect whether we need to regenerate the perl/perl.mak, which I fixed
just recently to deal with issues like the perl version changing from
under us[6].
There is absolutely no reason for why this needs to be so complex
anymore. All we're getting out of this elaborate Rube Goldberg machine
was copying perl/* to perl/blib/* as we do a string-replacement on
the *.pm files to hardcode @@LOCALEDIR@@ in the source, as well as
pod2man-ing Git.pm & friends.
So replace the whole thing with something that's pretty much a copy of
how we generate po/build/**.mo from po/*.po, just with a small sed(1)
command instead of msgfmt. As that's being done rename the files
from *.pm to *.pmc just to indicate that they're generated (see
"perldoc -f require").
While I'm at it, change the fallback for Error.pm from being something
where we'll ship our own Error.pm if one doesn't exist at build time
to one where we just use a Git::Error wrapper that'll always prefer
the system-wide Error.pm, only falling back to our own copy if it
really doesn't exist at runtime. It's now shipped as
Git::FromCPAN::Error, making it easy to add other modules to
Git::FromCPAN::* in the future if that's needed.
Functional changes:
* This will not always install into perl's idea of its global
"installsitelib". This only potentially matters for packagers that
need to expose Git.pm for non-git use, and as explained in the
INSTALL file there's a trivial workaround.
* The scripts themselves will 'use lib' the target directory, but if
INSTLIBDIR is set it overrides it. It doesn't have to be this way,
it could be set in addition to INSTLIBDIR, but my reading of [7] is
that this is the desired behavior.
* We don't build man pages for all of the perl modules as we used to,
only Git(3pm). As discussed on-list[8] that we were building
installed manpages for purely internal APIs like Git::I18N or
private-Error.pm was always a bug anyway, and all the Git::SVN::*
ones say they're internal APIs.
There are apparently external users of Git.pm, but I don't expect
there to be any of the others.
As a side-effect of these general changes the perl documentation
now only installed by install-{doc,man}, not a mere "install" as
before.
1. 5e9637c629 ("i18n: add infrastructure for translating Git with
gettext", 2011-11-18)
2. b1edc53d06 ("Introduce Git.pm (v4)", 2006-06-24)
3. 18b0fc1ce1 ("Git.pm: Kill Git.xs for now", 2006-09-23)
4. f848718a69 ("Make perl/ build procedure ActiveState friendly.",
2006-12-04)
5. ee9be06770 ("perl: detect new files in MakeMaker builds",
2012-07-27)
6. c59c4939c2 ("perl: regenerate perl.mak if perl -V changes",
2017-03-29)
7. 0386dd37b1 ("Makefile: add PERLLIB_EXTRA variable that adds to
default perl path", 2013-11-15)
8. 87bmjjv1pu.fsf@evledraar.booking.com ("Re: [PATCH] Makefile:
replace perl/Makefile.PL with simple make rules"
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This extends git-send-email to also consider sendmail binaries in $PATH
after checking the (fixed) list of /usr/sbin and /usr/lib, and before
falling back to localhost.
Signed-off-by: Florian Klink <flokli@flokli.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using Mail::Address made sense when we didn't have a proper parser. We
now have a reasonable address parser, and using Mail::Address
_if available_ causes much more trouble than it gives benefits:
* Developers typically test one version, not both.
* Users may not be aware that installing Mail::Address will change the
behavior. They may complain about the behavior in one case without
knowing that Mail::Address is involved.
* Having this optional Mail::Address makes it tempting to anwser "please
install Mail::Address" to users instead of fixing our own code. We've
reached the stage where bugs in our parser should be fixed, not worked
around.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a followup over 9d33439 (send-email: only allow one address
per body tag, 2017-02-20). The first iteration did allow writting
Cc: <foo@example.com> # garbage
but did so by matching the regex ([^>]*>?), i.e. stop after the first
instance of '>'. However, it did not properly deal with
Cc: foo@example.com # garbage
Fix this using a new function strip_garbage_one_address, which does
essentially what the old ([^>]*>?) was doing, but dealing with more
corner-cases. Since we've allowed
Cc: "Foo # Bar" <foobar@example.com>
in previous versions, it makes sense to continue allowing it (but we
still remove any garbage after it). OTOH, when an address is given
without quoting, we just take the first word and ignore everything
after.
Signed-off-by: Matthieu Moy <git@matthieu-moy.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" learned to overcome some SMTP server limitation
that does not allow many pieces of e-mails to be sent over a single
session.
* xz/send-email-batch-size:
send-email: --batch-size to work around some SMTP server limit
Some email servers (e.g. smtp.163.com) limit the number emails to be
sent per session (connection) and this will lead to a faliure when
sending many messages.
Teach send-email to disconnect after sending a number of messages
(configurable via the --batch-size=<num> option), wait for a few
seconds (configurable via the --relogin-delay=<seconds> option) and
reconnect, to work around such a limit.
Also add two configuration variables to give these options the default.
Note:
We will use this as a band-aid for now, but in the longer term, we
should look at and react to the SMTP error code from the server;
Xianqiang reports that 450 and 451 are returned by problematic
servers.
cf. https://public-inbox.org/git/7993e188.d18d.15c3560bcaf.Coremail.zxq_yx_007@163.com/
Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless --no-validate is passed, send-email will invoke
$repo->repo_path() in its search for a validate hook regardless of
whether a Git repo is actually present. Teach send-email to first check
for repo existence.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We cannot rely on the starttls method being present in Net::SMTP until
c274b798e6881a941d941808c6d89966975cb8c8 (Merge branch 'ipv6_ssl' of
https://github.com/noxxi/perl-libnet into noxxi-ipv6_ssl, 2014-06-02),
which set the module version to 2.34.
This version was first shipped as part of perl in v5.21.5~169 (Update
libnet to CPAN version 3.01, 2014-10-10).
Noticed on an Ubuntu system with perl 5.18.2-2ubuntu1.1, which
provides Net::SMTP version 2.31. The error message is
Can't locate object method "starttls" via package "Net::SMTP" at /usr/lib/git-core/git-send-email line 1410.
Reported-by: Brandon Williams <bmwill@google.com>
Reported-and-tested-by: Eric Biggers <ebiggers3@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" now uses Net::SMTP::SSL, which is obsolete, only
when needed. Recent versions of Net::SMTP can do TLS natively.
* dk/send-email-avoid-net-smtp-ssl-when-able:
send-email: Net::SMTP::SSL is obsolete, use only when necessary
Net::SMTP itself can do the necessary SSL and STARTTLS bits just fine
since version 1.28, and Net::SMTP::SSL is now deprecated. Since 1.28
isn't that old yet, keep the old code in place and use it when
necessary.
While we're in the area, mark some messages for translation that were
not yet marked as such.
Signed-off-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, send-email has support for rudimentary e-mail validation.
Allow the user to add support for more validation by providing a
sendemail-validate hook.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
Adding comments after a tag in the body is a common practise (e.g. in
the Linux kernel) and git-send-email has been supporting this for years
by removing any trailing cruft after the address.
After some recent changes, any trailing comment is now instead appended
to the recipient name (with some random white space inserted) resulting
in undesirable noise in the headers, for example:
CC: "# 3 . 3 . x : 1b9508f : sched : Rate-limit newidle" <stable@vger.kernel.org>
Revert to the earlier behaviour of discarding anything after the (first)
address in a tag while parsing the body.
Note that multiple addresses after are still allowed after a command
line switch (and in a CC header field).
Also note that --suppress-cc=self was never honoured when using multiple
addresses in a tag.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When composing an e-mail, there is a message for the user whose lines
begin in "GIT:" that can be marked for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark warnings, errors and other messages that are interpolated for
translation.
We call sprintf() before calling die() and in few other circumstances in
order to replace the values on the placeholders.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark warnings, errors and other messages for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark strings often displayed to the user for translation.
Signed-off-by: Vasco Almeida <vascomalmeida@sapo.pt>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A careless invocation of "git send-email directory/" after editing
0001-change.patch with an editor often ends up sending both
0001-change.patch and its backup file, 0001-change.patch~, causing
embarrassment and a minor confusion. Detect such an input and
offer to skip the backup files when sending the patches out.
* jc/send-email-skip-backup:
send-email: detect and offer to skip backup files
A question by "git send-email" to ask the identity of the sender
has been updated.
* jd/send-email-to-whom:
send-email: fix grammo in the prompt that asks e-mail recipients
The message, which dates back to the very original version 83b24437
made in 2005, sounds clumsy, grammatically incorrect, and is hard to
understand.
Reported-by: John Darrington <john@darrington.wattle.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" now uses a more readable timestamps when
formulating a message ID.
* ew/send-email-readable-message-id:
send-email: more meaningful Message-ID
Diligent people save output from format-patch to files, proofread
and edit them and then finally send the result out. If the
resulting files are sent out with "git send-email 0*", this ends up
sending backup files (e.g. 0001-X.patch.backup or 0001-X.patch~)
left by their editors next to the final version. Sending them with
"git send-email 0*.patch" (if format-patch was run with the standard
suffix) would avoid such an embarrassment, but not everybody is
careful.
After collecting files to be sent (and sorting them if read from a
directory), notice when the file being sent out has the same name as
the previous file, plus some suffix (e.g. 0001-X.patch was sent, and
we are looking at 0001-X.patch.backup or 0001-X.patch~), and the
suffix begins with a non-alnum (e.g. ".backup" or "~") and ask if
the user really wants to send it out. Once the user skips sending
such a "backup" file, remember the suffix and stop asking the same
question (e.g. after skipping 0001-X.patch~, skip 0002-Y.patch~
without asking).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We never used Data::Dumper in this script. The only reference
of it was always commented out and removed over a decade ago in
commit 4bc87a28be
("send-email: Change from Mail::Sendmail to Net::SMTP")
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a YYYYmmddHHMMSS date representation is more meaningful to
humans, especially when used for lookups on NNTP servers or linking
to archive sites via Message-ID (e.g. mid.gmane.org or
mid.mail-archive.com). This timestamp format more easily gives a
reader of the URL itself a rough date of a linked message compared
to having them calculate the seconds since the Unix epoch.
Furthermore, having the MUA name in the Message-ID seems to be a
rare oddity I haven't noticed outside of git-send-email. We
already have an optional X-Mailer header field to advertise for
us, so extending the Message-ID by 15 characters can make for
unpleasant Message-ID-based URLs to archive sites.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The regex for parsing mailrc considers everything after the
second whitespace to be the email address, up to the end of
the line. We have to include whitespace there, because you
may have multiple space-separated addresses, each with their
own internal quoting.
But if there is trailing whitespace, we include that, too.
This confuses quotewords() when we try to split the
individual addresses, and we end up storing "undef" in our
alias list. Later parts of the code then access that,
generating perl warnings.
Let's tweak our regex to throw away any trailing whitespace
on each line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git send-email" was confused by escaped quotes stored in the alias
files saved by "mutt", which has been corrected.
* ew/send-email-mutt-alias-fix:
git-send-email: do not double-escape quotes from mutt
