Add a repository argument to allow oid_object_info_extended callers
to be more specific about which repository to act on. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
Signed-off-by: Stefan Beller <sbeller@google.com>
Reviewed-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a repository argument to allow callers of lookup_replace_object
to be more specific about which repository to handle. This is a small
mechanical change; it doesn't change the implementation to handle
repositories other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lookup_replace_object is a low-level function that most users of the
object store do not need to use directly.
Move it to replace-object.h to avoid a dependency loop in an upcoming
change to its inline definition that will make use of repository.h.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactoring the internal global data structure to make it possible
to open multiple repositories, work with and then close them.
Rerolled by Duy on top of a separate preliminary clean-up topic.
The resulting structure of the topics looked very sensible.
* sb/object-store: (27 commits)
sha1_file: allow sha1_loose_object_info to handle arbitrary repositories
sha1_file: allow map_sha1_file to handle arbitrary repositories
sha1_file: allow map_sha1_file_1 to handle arbitrary repositories
sha1_file: allow open_sha1_file to handle arbitrary repositories
sha1_file: allow stat_sha1_file to handle arbitrary repositories
sha1_file: allow sha1_file_name to handle arbitrary repositories
sha1_file: add repository argument to sha1_loose_object_info
sha1_file: add repository argument to map_sha1_file
sha1_file: add repository argument to map_sha1_file_1
sha1_file: add repository argument to open_sha1_file
sha1_file: add repository argument to stat_sha1_file
sha1_file: add repository argument to sha1_file_name
sha1_file: allow prepare_alt_odb to handle arbitrary repositories
sha1_file: allow link_alt_odb_entries to handle arbitrary repositories
sha1_file: add repository argument to prepare_alt_odb
sha1_file: add repository argument to link_alt_odb_entries
sha1_file: add repository argument to read_info_alternates
sha1_file: add repository argument to link_alt_odb_entry
sha1_file: add raw_object_store argument to alt_odb_usable
pack: move approximate object count to object store
...
Add a repository argument to allow map_sha1_file callers to be more
specific about which repository to handle. This is a small mechanical
change; it doesn't change the implementation to handle repositories
other than the_repository yet.
As with the previous commits, use a macro to catch callers passing a
repository other than the_repository at compile time.
While at it, move the declaration to object-store.h, where it should
be easier to find.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert both the argument and the return value to be pointers to struct
object_id. Update the callers and their internals to deal with the new
type. Remove several temporaries which are no longer needed.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert read_sha1_file to take a pointer to struct object_id and rename
it read_object_file. Do the same for read_sha1_file_extended.
Convert one use in grep.c to use the new function without any other code
change, since the pointer being passed is a void pointer that is already
initialized with a pointer to struct object_id. Update the declaration
and definitions of the modified functions, and apply the following
semantic patch to convert the remaining callers:
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1.hash, E2, E3)
+ read_object_file(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- read_sha1_file(E1->hash, E2, E3)
+ read_object_file(E1, E2, E3)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1.hash, E2, E3, E4)
+ read_object_file_extended(&E1, E2, E3, E4)
@@
expression E1, E2, E3, E4;
@@
- read_sha1_file_extended(E1->hash, E2, E3, E4)
+ read_object_file_extended(E1, E2, E3, E4)
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the various open_istream variants to take a pointer to struct
object_id. Introduce a temporary, which will be removed later, to work
around the fact that lookup_replace_object still returns a pointer to
unsigned char.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert sha1_object_info and sha1_object_info_extended to take pointers
to struct object_id and rename them to use "oid" instead of "sha1" in
their names. Update the declaration and definition and apply the
following semantic patch, plus the standard object_id transforms:
@@
expression E1, E2;
@@
- sha1_object_info(E1.hash, E2)
+ oid_object_info(&E1, E2)
@@
expression E1, E2;
@@
- sha1_object_info(E1->hash, E2)
+ oid_object_info(E1, E2)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1.hash, E2, E3)
+ oid_object_info_extended(&E1, E2, E3)
@@
expression E1, E2, E3;
@@
- sha1_object_info_extended(E1->hash, E2, E3)
+ oid_object_info_extended(E1, E2, E3)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the remaining caller of sha1_object_info_extended to use struct
object_id. Introduce temporaries, which will be removed later, since
there is a dependency loop between sha1_object_info_extended and
lookup_replace_object_extended. This allows us to convert the code in a
piecemeal fashion instead of all at once.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many codepaths did not diagnose write failures correctly when disks
go full, due to their misuse of write_in_full() helper function,
which have been corrected.
* jk/write-in-full-fix:
read_pack_header: handle signed/unsigned comparison in read result
config: flip return value of store_write_*()
notes-merge: use ssize_t for write_in_full() return value
pkt-line: check write_in_full() errors against "< 0"
convert less-trivial versions of "write_in_full() != len"
avoid "write_in_full(fd, buf, len) != len" pattern
get-tar-commit-id: check write_in_full() return against 0
config: avoid "write_in_full(fd, buf, len) < len" pattern
The prior commit converted many sites to check the return
value of write_in_full() for negativity, rather than a
mismatch with the input length. This patch covers similar
cases, but where the return value is stored in an
intermediate variable. These should get the same treatment,
but they need to be reviewed more carefully since it would
be a bug if the return value is stored in an unsigned type
(which indeed, it is in one of the cases).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function open_packed_git() needs to be temporarily made global. Its
scope will be restored to static in a subsequent commit.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git pack-objects" in a repository with many packfiles used to
spend a lot of time looking for/at objects in them; the accesses to
the packfiles are now optimized by checking the most-recently-used
packfile first.
* jk/pack-objects-optim-mru:
pack-objects: use mru list when iterating over packs
pack-objects: break delta cycles before delta-search phase
sha1_file: make packed_object_info public
provide an initializer for "struct object_info"
Codepaths that read from an on-disk loose object were too loose in
validating what they are reading is a proper object file and
sometimes read past the data they read from the disk, which has
been corrected. H/t to Gustavo Grieco for reporting.
* jc/verify-loose-object-header:
unpack_sha1_header(): detect malformed object header
streaming: make sure to notice corrupt object
The streaming read interface from a loose object called
parse_sha1_header() but discarded its return value, without noticing
a potential error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since all of its callers have been updated, modify stream_blob_to_fd to
take a struct object_id.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An all-zero initializer is fine for this struct, but because
the first element is a pointer, call sites need to know to
use "NULL" instead of "0". Otherwise some static checkers
like "sparse" will complain; see d099b71 (Fix some sparse
warnings, 2013-07-18) for example. So let's provide an
initializer to make this easier to get right.
But let's also comment that memset() to zero is explicitly
OK[1]. One of the callers embeds object_info in another
struct which is initialized via memset (expand_data in
builtin/cat-file.c). Since our subset of C doesn't allow
assignment from a compound literal, handling this in any
other way is awkward, so we'd like to keep the ability to
initialize by memset(). By documenting this property, it
should make anybody who wants to change the initializer
think twice before doing so.
There's one other caller of interest. In parse_sha1_header(),
we did not initialize the struct fully in the first place.
This turned out not to be a bug because the sub-function it
calls does not look at any other fields except the ones we
did initialize. But that assumption might not hold in the
future, so it's a dangerous construct. This patch switches
it to initializing the whole struct, which protects us
against unexpected reads of the other fields.
[1] Obviously using memset() to initialize a pointer
violates the C standard, but we long ago decided that it
was an acceptable tradeoff in the real world.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stream_blob_to_fd() opens an input stream with a filter, the
filter gets discarded upon calling close_istream() before the
function returns in the normal case. However, when we fail to open
the stream, we failed to discard the filter.
By discarding the filter in the failure case, give a consistent
life-time rule of the filter to the callers; otherwise the callers
need to conditionally discard the filter themselves, and this
function does not give enough hint for the caller to do so
correctly.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stream-filter cannot be attached, it is expected to return NULL,
and we should close the stream we opened and signal an error by
returning NULL ourselves from this function.
However, we attempted to dereference that NULL pointer between the
point we detected the error and returned from the function.
Brought-to-attention-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our xwrite wrapper already deals with a few potential hazards, and
are as such more robust. Prefer it instead of write to get the
robustness benefits everywhere.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-and-improved-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This parameter is not used yet, but it will be used to tell
sha1_object_info_extended() if it should perform object
replacement or not.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If somebody wants to only know on-disk footprint of an object
without having to know its type or payload size, we can bypass a
lot of code to cheaply learn it.
* jk/cat-file-batch-optim:
Fix some sparse warnings
sha1_object_info_extended: pass object_info to helpers
sha1_object_info_extended: make type calculation optional
packed_object_info: make type lookup optional
packed_object_info: hoist delta type resolution to helper
sha1_loose_object_info: make type lookup optional
sha1_object_info_extended: rename "status" to "type"
cat-file: disable object/refname ambiguity check for batch mode
'st' is allocated via xmalloc a few lines before and passed to
the stream opening functions.
The xmalloc function is written in a way that either 'st' is allocated
valid memory or xmalloc already dies.
The function calls to open_istream_* do not change 'st', as the pointer is
passed by reference and not a pointer of a pointer.
Hence 'st' cannot be null at that part of the code.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues some "Using plain integer as NULL pointer" warnings.
Each warning relates to the use of an '{0}' initialiser expression
in the declaration of an 'struct object_info'. The first field of
this structure has pointer type. Thus, in order to suppress these
warnings, we replace the initialiser expression with '{NULL}'.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each caller of sha1_object_info_extended sets up an
object_info struct to tell the function which elements of
the object it wants to get. Until now, getting the type of
the object has always been required (and it is returned via
the return type rather than a pointer in object_info).
This can involve actually opening a loose object file to
determine its type, or following delta chains to determine a
packed file's base type. These effects produce a measurable
slow-down when doing a "cat-file --batch-check" that does
not include %(objecttype).
This patch adds a "typep" query to struct object_info, so
that it can be optionally queried just like size and
disk_size. As a result, the return type of the function is
no longer the object type, but rather 0/-1 for success/error.
As there are only three callers total, we just fix up each
caller rather than keep a compatibility wrapper:
1. The simpler sha1_object_info wrapper continues to
always ask for and return the type field.
2. The istream_source function wants to know the type, and
so always asks for it.
3. The cat-file batch code asks for the type only when
%(objecttype) is part of the format string.
On linux.git, the best-of-five for running:
$ git rev-list --objects --all >objects
$ time git cat-file --batch-check='%(objectsize:disk)'
on a fully packed repository goes from:
real 0m8.680s
user 0m8.160s
sys 0m0.512s
to:
real 0m7.205s
user 0m6.580s
sys 0m0.608s
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sha1_object_info_extended function expects the caller to
provide a "struct object_info" which contains pointers to
"query" items that will be filled in. The purpose of
providing pointers rather than storing the response directly
in the struct is so that callers can choose not to incur the
expense in finding particular fields that they do not care
about.
Right now the only query item is "sizep", and all callers
set it explicitly to choose whether or not to query it; they
can then leave the rest of the struct uninitialized.
However, as we add new query items, each caller will have to
be updated to explicitly turn off the new ones (by setting
them to NULL). Instead, let's teach each caller to
zero-initialize the struct, so that they do not have to
learn about each new query item added.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The read_istream_loose function loops on inflating a chunk of data
from an mmap'd loose object. We end the loop when we run out
of space in our output buffer, or if we see a zlib error.
We need to treat Z_BUF_ERROR specially, though, as it is not
fatal; it is just zlib's way of telling us that we need to
either feed it more input or give it more output space. It
is perfectly normal for us to hit this when we are at the
end of our buffer.
However, we may also get Z_BUF_ERROR because we have run out
of input. In a well-formed object, this should not happen,
because we have fed the whole mmap'd contents to zlib. But
if the object is truncated or corrupt, we will loop forever,
never giving zlib any more data, but continuing to ask it to
inflate.
We can fix this by considering it an error when zlib returns
Z_BUF_ERROR but we still have output space left (which means
it must want more input, which we know is a truncation
error). It would not be sufficient to just check whether
zlib had consumed all the input at the start of the loop, as
it might still want to generate output from what is in its
internal state.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filter istream pulls data from an "upstream" stream,
running it through a filter function. However, we did not
properly notice when the upstream filter yielded an error,
and just returned what we had read. Instead, we should
propagate the error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We call read_istream, but never check its return value for
errors. This can lead to us looping infinitely, as we just
keep trying to write "-1" bytes (and we do not notice the
error, as we simply check that write_in_full reports the
same number of bytes we fed it, which of course is also -1).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is because all other places do "xx > big_file_threshold"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow any kind of buffer to be fed to read_istream() without an explicit
cast by making it's buf argument a void pointer. It's about arbitrary
data, not only characters.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The static function in entry.c takes a cache entry and streams its blob
contents to a file in the working tree. Refactor the logic to a new API
function stream_blob_to_fd() that takes an object name and an open file
descriptor, so that it can be reused by other callers.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kirill Smelkov noticed that post-1.7.6 "git checkout"
started leaking tons of memory. The streaming_write_entry
function properly calls close_istream(), but that function
did not actually free() the allocated git_istream struct.
The git_istream struct is totally opaque to calling code,
and must be heap-allocated by open_istream. Therefore it's
not appropriate for callers to have to free it.
This patch makes close_istream() into "close and de-allocate
all associated resources". We could add a new "free_istream"
call, but there's not much point in letting callers inspect
the istream after close. And this patch's semantics make us
match fopen/fclose, which is well-known and understood.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
Some filters may need to buffer the input and look-ahead inside it
to decide what to output, and they may consume more than zero bytes
of input and still not produce any output. After feeding all the
input, pass NULL as input as keep calling stream_filter() to let
such filters know there is no more input coming, and it is time for
them to produce the remaining output based on the buffered input.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces an API to plug custom filters to an input stream.
The caller gets get_stream_filter("path") to obtain an appropriate
filter for the path, and then uses it when opening an input stream
via open_istream(). After that, the caller can read from the stream
with read_istream(), and close it with close_istream(), just like an
unfiltered stream.
This only adds a "null" filter that is a pass-thru filter, but later
changes can add LF-to-CRLF and other filters, and the callers of the
streaming API do not have to change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given an object name, use open_istream() to get a git_istream handle
that you can read_istream() from as if you are using read(2) to read
the contents of the object, and close it with close_istream() when
you are done.
Currently, we do not do anything fancy--it just calls read_sha1_file()
and keeps the contents in memory as a whole, and carve it out as you
request with read_istream().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
