We spell config variables in camelCase instead of with_underscores.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give a single message followed by list of paths from "git rm" to
report multiple paths that cannot be removed.
* mm/rm-coalesce-errors:
rm: introduce advice.rmHints to shorten messages
rm: better error message on failure for multiple files
We promised to change the behaviour of lazy "git push [there]" that
does not say what to push on the command line from "matching" to
"simple" in Git 2.0.
This finally flips that bit.
Helped-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce advice.rmHints to choose whether to display advice or not
when git rm fails. Defaults to true, in order to preserve current behavior.
As an example, the message:
error: 'foo.txt' has changes staged in the index
(use --cached to keep the file, or -f to force removal)
would look like, with advice.rmHints=false:
error: 'foo.txt' has changes staged in the index
Signed-off-by: Mathieu Lienard--Mayor <Mathieu.Lienard--Mayor@ensimag.imag.fr>
Signed-off-by: Jorge Juan Garcia Garcia <Jorge-Juan.Garcia-Garcia@ensimag.imag.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git cmd <name>", when <name> happens to be a 40-hex string,
directly uses the 40-hex string as an object name, even if a ref
"refs/<some hierarchy>/<name>" exists. This disambiguation order
is unlikely to change, but we should warn about the ambiguity just
like we warn when more than one refs/ hierachies share the same
name.
* nd/warn-ambiguous-object-name:
get_sha1: warn about full or short object names that look like refs
When we get 40 hex digits, we immediately assume it's an SHA-1. This
is the right thing to do because we have no way else to specify an
object. If there is a ref with the same object name, it will be
ignored. Warn the user about this case because the ref with full
object name is likely a mistake, for example
git checkout -b $empty_var $(git rev-parse something)
advice.object_name_warning is not documented because frankly people
should not be aware about it until they encounter this situation.
While at there, warn about ambiguation with abbreviated SHA-1 too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user requests to --set-upstream-to a branch that does
not exist, then either:
1. It was a typo.
2. They thought the branch should exist.
In case (1), there is not much we can do beyond showing the
name we tried to use. For case (2), though, we can help to
guide them through common workflows.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
Introduce advice.statusUoption to suggest considering use of -u to
strike different trade-off when it took more than 2 seconds to
enumerate untracked/ignored files.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we push to update an existing ref, if:
* the object at the tip of the remote is not a commit; or
* the object we are pushing is not a commit,
it won't be correct to suggest to fetch, integrate and push again,
as the old and new objects will not "merge". We should explain that
the push must be forced when there is a non-committish object is
involved in such a case.
If we do not have the current object at the tip of the remote, we do
not even know that object, when fetched, is something that can be
merged. In such a case, suggesting to pull first just like
non-fast-forward case may not be technically correct, but in
practice, most such failures are seen when you try to push your work
to a branch without knowing that somebody else already pushed to
update the same branch since you forked, so "pull first" would work
as a suggestion most of the time. And if the object at the tip is
not a commit, "pull first" will fail, without making any permanent
damage. As a side effect, it also makes the error message the user
will get during the next "push" attempt easier to understand, now
the user is aware that a non-commit object is involved.
In these cases, the current code already rejects such a push on the
client end, but we used the same error and advice messages as the
ones used when rejecting a non-fast-forward push, i.e. pull from
there and integrate before pushing again.
Introduce new rejection reasons and reword the messages
appropriately.
[jc: with help by Peff on message details]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add 'advice.pushAlreadyExists' option to disable the advice shown when
an update is rejected for a reference that is not allowed to update at
all (verses those that are allowed to fast-forward.)
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'pushNonFastForward' advice config can be used to squelch several
instances of push-related advice. Rename it to 'pushUpdateRejected' to
cover other reject scenarios that are unrelated to fast-forwarding.
Retain the old name for compatibility.
Signed-off-by: Chris Rorvick <chris@rorvick.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The advise() function did not use varargs correctly to format
its message.
* jk/maint-advise-vaddf:
advice: pass varargs to strbuf_vaddf, not strbuf_addf
The advise() function takes a variable number of arguments
and converts them into a va_list object to pass to strbuf
for handling. However, we accidentally called strbuf_addf
(that takes a variable number of arguments) instead of
strbuf_vaddf (that takes a va_list).
This bug dates back to v1.7.8.1-1-g23cb5bf, but we never
noticed because none of the current callers passes a string
with a format specifier in it. And the compiler did not
notice because the format string is not available at
compile time.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pushing a non-fast-forward update to a remote repository will result in
an error, but the hint text doesn't provide the correct resolution in
every case. Give better resolution advice in three push scenarios:
1) If you push your current branch and it triggers a non-fast-forward
error, you should merge remote changes with 'git pull' before pushing
again.
2) If you push to a shared repository others push to, and your local
tracking branches are not kept up to date, the 'matching refs' default
will generate non-fast-forward errors on outdated branches. If this is
your workflow, the 'matching refs' default is not for you. Consider
setting the 'push.default' configuration variable to 'current' or
'upstream' to ensure only your current branch is pushed.
3) If you explicitly specify a ref that is not your current branch or
push matching branches with ':', you will generate a non-fast-forward
error if any pushed branch tip is out of date. You should checkout the
offending branch and merge remote changes before pushing again.
Teach transport.c to recognize these scenarios and configure push.c
to hint for them. If 'git push's default behavior changes or we
discover more scenarios, extension is easy. Standardize on the
advice API and add three new advice variables, 'pushNonFFCurrent',
'pushNonFFDefault', and 'pushNonFFMatching'. Setting any of these
to 'false' will disable their affiliated advice. Setting
'pushNonFastForward' to false will disable all three, thus preserving the
config option for users who already set it, but guaranteeing new
users won't disable push advice accidentally.
Based-on-patch-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christopher Tiwald <christiwald@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/clone-detached:
clone: fix up delay cloning conditions
push: do not let configured foreign-vcs permanently clobbered
clone: print advice on checking out detached HEAD
clone: allow --branch to take a tag
clone: refuse to clone if --branch points to bogus ref
clone: --branch=<branch> always means refs/heads/<branch>
clone: delay cloning until after remote HEAD checking
clone: factor out remote ref writing
clone: factor out HEAD update code
clone: factor out checkout code
clone: write detached HEAD in bare repositories
t5601: add missing && cascade
Advice messages are by definition meant for human end-users, and prime
candidates for i18n/l10n. They tend to also be more verbose to be helpful,
and need to be longer than just one line.
Although we do not have parameterized multi-line advice messages yet, once
we do, we cannot emit such a message like this:
advise(_("Please rename %s to something else"), gostak);
advise(_("so that we can avoid distimming %s unnecessarily."), doshes);
because some translations may need to have the replacement of 'gostak' on
the second line (or 'doshes' on the first line). Some languages may even
need to use three lines in order to fit the same message within a
reasonable width.
Instead, it has to be a single advise() construct, like this:
advise(_("Please rename %s to something else\n"
"so that we can avoid distimming %s unnecessarily."),
gostak, doshes);
Update the advise() function and its existing callers to
- take a format string that can be multi-line and translatable as a
whole;
- use the string and the parameters to form a localized message; and
- show each line in the result with the localization of the "hint: ".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enable future callers to report a conflict and not die immediately by
introducing a new function called error_resolve_conflict.
Re-implement die_resolve_conflict as a call to error_resolve_conflict
followed by a call to die. Consequently, the message printed by
die_resolve_conflict changes from
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree ...
...
to
error: 'commit' is not possible because you have unmerged files.
hint: Fix them up in the work tree ...
hint: ...
fatal: Exiting because of an unresolved conflict.
Hints are printed using the same advise function introduced in
v1.7.3-rc0~26^2~3 (Introduce advise() to print hints, 2010-08-11).
Inspired-by: Christian Couder <chistian.couder@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old "advice" message explained how to create a branch after going into
a detached HEAD state but didn't make it clear why the user may want to do
so. Also "moving to ... which isn't a local branch" was unclear if it is
complaining, if it is describing the new state, or if it is explaining why
the HEAD is detached (the true reason is the last one).
Give the established phrase 'detached HEAD' first to make it easy for
users to look up the concept in documentation, and briefly describe what
can be done in the state (i.e. play around without having to clean up)
before telling the user how to keep what was done during the temporary
state.
Allow the long description to be hidden by setting advice.detachedHead
configuration to false.
We might want to customize the advice depending on how the commit to check
out was spelled (e.g. instead of "new-branch-name", we way want to say
"topic" when "git checkout origin/topic" triggered this message) in later
updates, but this encapsulates that into a separate function and it should
be a good first step.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We now nag the user with a giant warning when their identity
was pulled from the username, hostname, and gecos
information, in case it is not correct. Most users will
suppress this by simply setting up their information
correctly.
However, there may be some users who consciously want to use
that information, because having the value change from host
to host contains useful information. These users can now set
advice.implicitidentity to false to suppress the message.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various commands refuse to run in the presence of conflicts (commit,
merge, pull, cherry-pick/revert). They all used to provide rough, and
inconsistant error messages.
A new variable advice.resolveconflict is introduced, and allows more
verbose messages, pointing the user to the appropriate solution.
For commit, the error message used to look like this:
$ git commit
foo.txt: needs merge
foo.txt: unmerged (c34a92682e0394bc0d6f4d4a67a8e2d32395c169)
foo.txt: unmerged (3afcd75de8de0bb5076942fcb17446be50451030)
foo.txt: unmerged (c9785d77b76dfe4fb038bf927ee518f6ae45ede4)
error: Error building trees
The "need merge" line is given by refresh_cache. We add the IN_PORCELAIN
option to make the output more consistant with the other porcelain
commands, and catch the error in return, to stop with a clean error
message. The next lines were displayed by a call to cache_tree_update(),
which is not reached anymore if we noticed the conflict.
The new output looks like:
U foo.txt
fatal: 'commit' is not possible because you have unmerged files.
Please, fix them up in the work tree, and then use 'git add/rm <file>' as
appropriate to mark resolution and make a commit, or use 'git commit -a'.
Pull is slightly modified to abort immediately if $GIT_DIR/MERGE_HEAD
exists instead of waiting for merge to complain.
The behavior of merge and the test-case are slightly modified to reflect
the usual flow: start with conflicts, fix them, and afterwards get rid of
MERGE_HEAD, with different error messages at each stage.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit-before-pull is well accepted in the DVCS community, but is
confusing some new users. This should get them back in the right way when
the problem occurs.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These messages are nice for new users, but experienced git
users know how to manipulate the index, and these messages
waste a lot of screen real estate.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This message is designed to help new users understand what
has happened when refs fail to push. However, it does not
help experienced users at all, and significantly clutters
the output, frequently dwarfing the regular status table and
making it harder to see.
This patch introduces a general configuration mechanism for
optional messages, with this push message as the first
example.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
