The recent update to terminal I/O interface to get passwords &c
interactively didn't quite work on Solaris.
* bw/maint-1.7.9-solaris-getpass:
Enable HAVE_DEV_TTY for Solaris
terminal: seek when switching between reading and writing
When a stdio stream is opened in update mode (e.g., "w+"),
the C standard forbids switching between reading or writing
without an intervening positioning function. Many
implementations are lenient about this, but Solaris libc
will flush the recently-read contents to the output buffer.
In this instance, that meant writing the non-echoed password
that the user just typed to the terminal.
Fix it by inserting a no-op fseek between the read and
write.
The opposite direction (writing followed by reading) is also
disallowed, but our intervening fflush is an acceptable
positioning function for that alternative.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teaches git to normalize pathnames read from readdir(3) and all
arguments from the command line into precomposed UTF-8 (assuming
that they come as decomposed UTF-8) to work around issues on Mac OS.
I think there still are other places that need conversion
(e.g. paths that are read from stdin for some commands), but this
should be a good first step in the right direction.
* tb/sanitize-decomposed-utf-8-pathname:
git on Mac OS and precomposed unicode
Mac OS X mangles file names containing unicode on file systems HFS+,
VFAT or SAMBA. When a file using unicode code points outside ASCII
is created on a HFS+ drive, the file name is converted into
decomposed unicode and written to disk. No conversion is done if
the file name is already decomposed unicode.
Calling open("\xc3\x84", ...) with a precomposed "Ä" yields the same
result as open("\x41\xcc\x88",...) with a decomposed "Ä".
As a consequence, readdir() returns the file names in decomposed
unicode, even if the user expects precomposed unicode. Unlike on
HFS+, Mac OS X stores files on a VFAT drive (e.g. an USB drive) in
precomposed unicode, but readdir() still returns file names in
decomposed unicode. When a git repository is stored on a network
share using SAMBA, file names are send over the wire and written to
disk on the remote system in precomposed unicode, but Mac OS X
readdir() returns decomposed unicode to be compatible with its
behaviour on HFS+ and VFAT.
The unicode decomposition causes many problems:
- The names "git add" and other commands get from the end user may
often be precomposed form (the decomposed form is not easily input
from the keyboard), but when the commands read from the filesystem
to see what it is going to update the index with already is on the
filesystem, readdir() will give decomposed form, which is different.
- Similarly "git log", "git mv" and all other commands that need to
compare pathnames found on the command line (often but not always
precomposed form; a command line input resulting from globbing may
be in decomposed) with pathnames found in the tree objects (should
be precomposed form to be compatible with other systems and for
consistency in general).
- The same for names stored in the index, which should be
precomposed, that may need to be compared with the names read from
readdir().
NFS mounted from Linux is fully transparent and does not suffer from
the above.
As Mac OS X treats precomposed and decomposed file names as equal,
we can
- wrap readdir() on Mac OS X to return the precomposed form, and
- normalize decomposed form given from the command line also to the
precomposed form,
to ensure that all pathnames used in Git are always in the
precomposed form. This behaviour can be requested by setting
"core.precomposedunicode" configuration variable to true.
The code in compat/precomposed_utf8.c implements basically 4 new
functions: precomposed_utf8_opendir(), precomposed_utf8_readdir(),
precomposed_utf8_closedir() and precompose_argv(). The first three
are to wrap opendir(3), readdir(3), and closedir(3) functions.
The argv[] conversion allows to use the TAB filename completion done
by the shell on command line. It tolerates other tools which use
readdir() to feed decomposed file names into git.
When creating a new git repository with "git init" or "git clone",
"core.precomposedunicode" will be set "false".
The user needs to activate this feature manually. She typically
sets core.precomposedunicode to "true" on HFS and VFAT, or file
systems mounted via SAMBA.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enables threading in index-pack to resolve base data in parallel.
By Nguyễn Thái Ngọc Duy (3) and Ramsay Jones (1)
* nd/threaded-index-pack:
index-pack: disable threading if NO_PREAD is defined
index-pack: support multithreaded delta resolving
index-pack: restructure pack processing into three main functions
compat/win32/pthread.h: Add an pthread_key_delete() implementation
The error handling routines add a newline. Remove
the duplicate ones in error messages.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When PATH contains an unreadable directory, alias expansion code did not
kick in, and failed with an error that said "git-subcmd" was not found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
The current t9300-fast-import.sh test number 62 ("L: nested tree
copy does not corrupt deltas") was introduced in commit 9a0edb79
("fast-import: add a test for tree delta base corruption",
15-08-2011). A fix for the demonstrated problem was introduced
by commit 8fb3ad76 ("fast-import: prevent producing bad delta",
15-08-2011). However, this fix didn't work on MinGW and so this
test has always failed on MinGW.
Part of the solution in commit 8fb3ad76 was to add an NO_DELTA
preprocessor constant which was defined as follows:
+/*
+ * We abuse the setuid bit on directories to mean "do not delta".
+ */
+#define NO_DELTA S_ISUID
+
Unfortunately, the S_ISUID constant on MinGW is defined as zero.
In order to fix the problem, we simply alter the definition of
S_ISUID in the mingw header file to a more appropriate value.
Also, we take the opportunity to similarly define S_ISGID and
S_ISVTX.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX standard specifies a return type of int for all six exec
functions. In addition, all exec functions return -1 on error, and
simply do not return on success. However, the current emulation of
the exec functions on mingw are declared with a void return type.
This would cause a problem should any code attempt to call the
exec function in a non-void context. In particular, if an exec
function were used in a conditional it would fail to compile.
In order to improve the fidelity of the emulation, we change the
return type of the mingw_execv[p] functions to int and return -1
on error.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As both of these compatibility wrappers include git-compat-utils.h,
all of the system includes were redundant.
Dropping these system includes also makes git-compat-utils.h the first
include which avoids a compiler warning on Solaris due to the
redefinition of _FILE_OFFSET_BITS.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/git-prompt:
contrib: add credential helper for OS X Keychain
Makefile: OS X has /dev/tty
Makefile: linux has /dev/tty
credential: use git_prompt instead of git_getpass
prompt: use git_terminal_prompt
add generic terminal prompt function
refactor git_getpass into generic prompt function
move git_getpass to its own source file
imap-send: don't check return value of git_getpass
imap-send: avoid buffer overflow
Conflicts:
Makefile
According to POSIX, setenv should error out with EINVAL if it's
asked to set an environment variable whose name contains an equals
sign. Implement this detail in our compatibility-fallback.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, gitsetenv didn't update errno as it should when
erroring out. Fix this.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we need to prompt the user for input interactively, we
want to access their terminal directly. We can't rely on
stdio because it may be connected to pipes or files, rather
than the terminal. Instead, we use "getpass()", because it
abstracts the idea of prompting and reading from the
terminal. However, it has some problems:
1. It never echoes the typed characters, which makes it OK
for passwords but annoying for other input (like usernames).
2. Some implementations of getpass() have an extremely
small input buffer (e.g., Solaris 8 is reported to
support only 8 characters).
3. Some implementations of getpass() will fall back to
reading from stdin (e.g., glibc). We explicitly don't
want this, because our stdin may be connected to a pipe
speaking a particular protocol, and reading will
disrupt the protocol flow (e.g., the remote-curl
helper).
4. Some implementations of getpass() turn off signals, so
that hitting "^C" on the terminal does not break out of
the password prompt. This can be a mild annoyance.
Instead, let's provide an abstract "git_terminal_prompt"
function that addresses these concerns. This patch includes
an implementation based on /dev/tty, enabled by setting
HAVE_DEV_TTY. The fallback is to use getpass() as before.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you define SNPRINTF_RETURNS_BOGUS, we use a special
git_vsnprintf wrapper assumes that vsnprintf returns "-1"
instead of the number of characters that you would need to
store the result.
To do this, it invokes vsnprintf multiple times, growing a
heap buffer until we have enough space to hold the result.
However, this means we evaluate the va_list parameter
multiple times, which is generally a bad thing (it may be
modified by calls to vsnprintf, yielding undefined
behavior).
Instead, we must va_copy it and hand the copy to vsnprintf,
so we always have a pristine va_list.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
POSIX says that last parameter to waitpid should be 'int',
so let's make it so.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since systems that omit strtoumax() will likely omit strtomax() too, and
likewise for strtoull() and strtoll(), we arrange for the make variables
NO_STRTOUMAX and NO_STRTOULL to cover both the signed and unsigned
functions, and define compatibility implementations for them.
Signed-off-by: Nick Alcock <nix@esperi.org.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These headers are no longer needed since they are no longer
unnecessarily included in git-compat-util.h.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This include is needed for _commit(..) which is used in mingw.h.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Acked-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX-function fork is not supported on Windows. Use our
start_command API instead.
As this is the last call-site that depends on the fork-stub in
compat/mingw.h, remove that as well.
Add an undocumented flag to git-archive that tells it that the
action originated from a remote, so features can be disabled.
Thanks to Jeff King for work on this part.
Remove the NOT_MINGW-prereq for t5000, as git-archive --remote
now works.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
poll.c is updated from revision adc3a5b in
git://git.savannah.gnu.org/gnulib.git
The changes are applied with --whitespace=fix to reduce noise.
poll.h is not upgraded, because the most recent version now
contains template-stuff that breaks compilation for us.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both XSI and upstream Gnulib versions expects to find poll.h at
the root of some include path, not inside the sys-folder.
This helps us when upgrading Gnulib.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* pt/mingw-misc-fixes:
t9901: fix line-ending dependency on windows
mingw: ensure sockets are initialized before calling gethostname
mergetools: use the correct tool for Beyond Compare 3 on Windows
t9300: do not run --cat-blob-fd related tests on MinGW
git-svn: On MSYS, escape and quote SVN_SSH also if set by the user
t9001: do not fail only due to CR/LF issues
t1020: disable the pwd test on MinGW
GCC 4.6 claims that
error: 'best.len' may be used uninitialized in this function
so silence that warning which is treated as an error by also initializing
the "len" members of the struct.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the Windows sockets subsystem has not been initialized yet then an
attempt to get the hostname returns an error and prints a warning to the
console. This solves this issue for msysGit as seen with 'git fetch'.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf can call die, which again can call syslog from git-daemon.
Endless recursion is no fun; fix it by hand-rolling the logic. As
a side-effect malloc/realloc errors are changed into non-fatal
warnings; this is probably an improvement anyway.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Noticed-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "x"-prefixed versions of strdup, malloc, etc. will check whether the
allocation was successful and terminate the process otherwise.
A few uses of malloc were left alone since they already implemented a
graceful path of failure or were in a quasi external library like xdiff.
Additionally, the call to malloc in compat/win32/syslog.c was not modified
since the syslog() implemented there is a die handler and a call to the
x-wrappers within a die handler could result in recursion should memory
allocation fail. This will have to be addressed separately.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, sparse issues the following warnings:
compat/obstack.c:176:17: warning: Using plain integer as NULL pointer
compat/obstack.c:224:17: warning: Using plain integer as NULL pointer
compat/obstack.c:324:16: warning: Using plain integer as NULL pointer
compat/obstack.c:329:16: warning: Using plain integer as NULL pointer
compat/obstack.c:347:16: warning: Using plain integer as NULL pointer
compat/obstack.c:362:19: warning: Using plain integer as NULL pointer
compat/obstack.c:379:29: warning: Using plain integer as NULL pointer
compat/obstack.c:399:1: error: symbol 'print_and_abort' redeclared with \
different type (originally declared at compat/obstack.c:95) \
- different modifiers
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
i686-apple-darwin10-gcc-4.2.1 (GCC) 4.2.1, SunOS 5.10, and possibly
others do not have exit.h and exitfail.h. Remove the use of these in
obstack.c.
The __block variable was renamed to block to avoid a gcc error:
compat/obstack.h:190: error: __block attribute can be specified on variables only
Initial-patch-by: David Aguilar <davvid@gmail.com>
Reported-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rj/config-cygwin:
config.c: Make git_config() work correctly when called recursively
t1301-*.sh: Fix the 'forced modes' test on cygwin
help.c: Fix detection of custom merge strategy on cygwin
* ef/maint-win-verify-path:
verify_dotfile(): do not assume '/' is the path seperator
verify_path(): simplify check at the directory boundary
verify_path: consider dos drive prefix
real_path: do not assume '/' is the path seperator
A Windows path starting with a backslash is absolute
* js/i18n-windows:
Windows: teach getenv to do a case-sensitive search
mingw.c: move definition of mingw_getenv down
sh-i18n--envsubst: do not crash when no arguments are given
Earlier 7974843 (compat/cygwin.c: make runtime detection of lstat/stat
lessor impact, 2008-10-23) fixed the low-level "do we use cygwin specific
hacks for stat/lstat?" logic not to call into git_default_config() from
random codepaths that are typically very late in the program, to prevent
the call from potentially overwriting other variables that are initialized
from the configuration.
However, it forgot that on Cygwin, trust-executable-bit should default to
true.
Noticed by J6t, confirmed by Ramsay Jones, and the brown paper bag is on
Gitster's head.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'forced modes' test fails on cygwin because the post-update
hook loses it's executable bit when copied from the templates
directory by git-init. The template loses it's executable bit
because the lstat() function resolves to the "native Win32 API"
implementation.
This call to lstat() happens after git-init has set the "git_dir"
(so has_git_dir() returns true), but before the configuration has
been fully initialised. At this point git_config() does not find
any config files to parse and returns 0. Unfortunately, the code
used to determine the cygwin l/stat() function bindings did not
check the return from git_config() and assumed that the config
was complete and accessible once "git_dir" was set.
In order to fix the test, we simply change the binding code to
test the return value from git_config(), to ensure that it actually
had config values to read, before determining the requested binding.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
