Remove the `DIFF_OPT_TST` macro and instead access the flags directly.
This conversion is done using the following semantic patch:
@@
expression E;
identifier fld;
@@
- DIFF_OPT_TST(&E, fld)
+ E.flags.fld
@@
type T;
T *ptr;
identifier fld;
@@
- DIFF_OPT_TST(ptr, fld)
+ ptr->flags.fld
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to expose the full power of the delayed progress API to the
callers, so that they can specify, not just the message to show and
expected total amount of work that is used to compute the percentage
of work performed so far, the percent-threshold parameter P and the
delay-seconds parameter N. The progress meter starts to show at N
seconds into the operation only if we have not yet completed P per-cent
of the total work.
Most callers used either (0%, 2s) or (50%, 1s) as (P, N), but there
are oddballs that chose more random-looking values like 95%.
For a smoother workload, (50%, 1s) would allow us to start showing
the progress meter earlier than (0%, 2s), while keeping the chance
of not showing progress meter for long running operation the same as
the latter. For a task that would take 2s or more to complete, it
is likely that less than half of it would complete within the first
second, if the workload is smooth. But for a spiky workload whose
earlier part is easier, such a setting is likely to fail to show the
progress meter entirely and (0%, 2s) is more appropriate.
But that is merely a theory. Realistically, it is of dubious value
to ask each codepath to carefully consider smoothness of their
workload and specify their own setting by passing two extra
parameters. Let's simplify the API by dropping both parameters and
have everybody use (0%, 2s).
Oh, by the way, the percent-threshold parameter and the structure
member were consistently misspelled, which also is now fixed ;-)
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log --tag=no-such-tag" showed log starting from HEAD, which
has been fixed---it now shows nothing.
* jk/rev-list-empty-input:
revision: do not fallback to default when rev_input_given is set
rev-list: don't show usage when we see empty ref patterns
revision: add rev_input_given flag
t6018: flesh out empty input/output rev-list tests
Numerous bugs in walking of reflogs via "log -g" and friends have
been fixed.
* jk/reflog-walk:
reflog-walk: apply --since/--until to reflog dates
reflog-walk: stop using fake parents
rev-list: check reflog_info before showing usage
get_revision_1(): replace do-while with an early return
log: do not free parents when walking reflog
log: clarify comment about reflog cycles
revision: disallow reflog walking with revs->limited
t1414: document some reflog-walk oddities
If the user gives us no starting point for a traversal, we
want to complain with our normal usage message. But if they
tried to do so with "--all" or "--glob", but that happened
not to match any refs, the usage message isn't helpful. We
should just give them the empty output they asked for
instead.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rev-list pretty-prints a commit, it creates a new
pretty_print_context and copies items from the rev_info
struct. We don't currently copy the "use_color" field,
though. Nobody seems to have noticed because the only part
of pretty.c that cares is the %C(auto,...) placeholder, and
presumably not many people use that with the rev-list
plumbing (as opposed to with git-log).
It will become more noticeable in a future patch, though,
when we start treating all user-format colors as auto-colors
(in which case it would become impossible to format colors
with rev-list, even with --color=always).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rev-list sees no pending commits, it shows a usage
message. This works even when reflog-walking is requested,
because the reflog-walk code currently puts the reflog tips
into the pending queue.
In preparation for refactoring the reflog-walk code, let's
explicitly check whether we have any reflogs to walk. For
now this is a noop, but the existing reflog tests will make
sure that it kicks in after the refactoring. Likewise, we'll
add a test that "rev-list -g" without specifying any reflogs
continues to fail (so that we know our check does not kick
in too aggressively).
Note that the implementation needs to go into its own
sub-function, as the walk code does not expose its innards
outside of reflog-walk.c.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix configuration codepath to pay proper attention to commondir
that is used in multi-worktree situation, and isolate config API
into its own header file.
* bw/config-h:
config: don't implicitly use gitdir or commondir
config: respect commondir
setup: teach discover_git_directory to respect the commondir
config: don't include config.h by default
config: remove git_config_iter
config: create config.h
"git $cmd -h" for builtin commands calls the implementation of the
command (i.e. cmd_$cmd() function) without doing any repository
set-up, and the commands that expect RUN_SETUP is done by the Git
potty needs to be prepared to show the help text without barfing.
* jk/consistent-h:
t0012: test "-h" with builtins
git: add hidden --list-builtins option
version: convert to parse-options
diff- and log- family: handle "git cmd -h" early
submodule--helper: show usage for "-h"
remote-{ext,fd}: print usage message on invalid arguments
upload-archive: handle "-h" option early
credential: handle invalid arguments earlier
Stop including config.h by default in cache.h. Instead only include
config.h in those files which require use of the config system.
Signed-off-by: Brandon Williams <bmwill@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git $builtin -h" bypasses the usual repository setup and calls the
cmd_$builtin() function, expecting it to show the help text.
Unfortunately the commands in the log- and the diff- family want to
call into the revisions machinery, which by definition needs to have
a repository already discovered. Strictly speaking, they may not
need a repository only for parsing "-h", but it is a good discipline
to future-proof codepath to ensure that setup_revisions() is called
after we know that a repository is there.
Handle the "git $builtin -h" special case very early in these
commands to work around potential issues.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conversion from uchar[20] to struct object_id continues.
* bc/object-id: (53 commits)
object: convert parse_object* to take struct object_id
tree: convert parse_tree_indirect to struct object_id
sequencer: convert do_recursive_merge to struct object_id
diff-lib: convert do_diff_cache to struct object_id
builtin/ls-tree: convert to struct object_id
merge: convert checkout_fast_forward to struct object_id
sequencer: convert fast_forward_to to struct object_id
builtin/ls-files: convert overlay_tree_on_cache to object_id
builtin/read-tree: convert to struct object_id
sha1_name: convert internals of peel_onion to object_id
upload-pack: convert remaining parse_object callers to object_id
revision: convert remaining parse_object callers to object_id
revision: rename add_pending_sha1 to add_pending_oid
http-push: convert process_ls_object and descendants to object_id
refs/files-backend: convert many internals to struct object_id
refs: convert struct ref_update to use struct object_id
ref-filter: convert some static functions to struct object_id
Convert struct ref_array_item to struct object_id
Convert the verify_pack callback to struct object_id
Convert lookup_tag to struct object_id
...
Currently, Git's source code treats all timestamps as if they were
unsigned longs. Therefore, it is okay to write "%lu" when printing them.
There is a substantial problem with that, though: at least on Windows,
time_t is *larger* than unsigned long, and hence we will want to switch
away from the ill-specified `unsigned long` data type.
So let's introduce the pseudo format "PRItime" (currently simply being
defined to "lu") to make it easier to change the data type used for
timestamps.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we will likely be introducing a new hash function at some point,
and that hash function might be longer than 40 hex characters, use the
constant GIT_MAX_HEXSZ, which is designed to be suitable for
allocations, instead of GIT_SHA1_HEXSZ. This will ease the transition
down the line by distinguishing between places where we need to allocate
memory suitable for the largest hash from those where we need to handle
the current hash.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Patch generated by Coccinelle and contrib/coccinelle/object_id.cocci.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding support for prefixing output of log and other commands using
--line-prefix, commit 660e113ce1 ("graph: add support for
--line-prefix on all graph-aware output", 2016-08-31) accidentally
broke rev-list --header output.
In order to make the output appear with a line-prefix, the flow was
changed to always use the graph subsystem for display. Unfortunately
the graph flow in rev-list did not use info->hdr_termination as it was
assumed that graph output would never need to putput NULs.
Since we now always use the graph code in order to handle the case of
line-prefix, simply replace putchar('\n') with
putchar(info->hdr_termination) which will correct this issue.
Add a test for the --header case to make sure we don't break it in the
future.
Reported-by: Dennis Kaarsemaker <dennis@kaarsemaker.net>
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=<string>" will print the
additional line-prefix on every line of output.
To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.
This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.
This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.
Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's easy to ask rev-list to do a traversal that may takes
many seconds (e.g., by calling "--objects --all"). In theory
you can monitor its progress by the output you get to
stdout, but this isn't always easy.
Some operations, like "--count", don't make any output until
the end.
And some callers, like check_everything_connected(), are
using it just for the error-checking of the traversal, and
throw away stdout entirely.
This patch adds a "--progress" option which can be used to
give some eye-candy for a user waiting for a long traversal.
This is just a rev-list option and not a regular traversal
option, because it needs cooperation from the callbacks in
builtin/rev-list.c to do the actual count.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rev-list --count" whose walk-length is limited with "-n"
option did not work well with the counting optimized to look at the
bitmap index.
* jk/rev-list-count-with-bitmap:
rev-list: disable bitmaps when "-n" is used with listing objects
rev-list: "adjust" results of "--count --use-bitmap-index -n"
You can ask rev-list to use bitmaps to speed up an --objects
traversal, which should generally give you your answers much
faster.
Likewise, you can ask rev-list to limit such a traversal
with `-n`, in which case we'll show only a limited set of
commits (and only the tree and commit objects directly
reachable from those commits).
But if you do both together, the results are nonsensical. We
end up limiting any fallback traversal we do to _find_ the
bitmaps, but the actual set of objects we output will be
picked arbitrarily from the union of any bitmaps we do find,
and will involve the objects of many more commits.
It's possible that somebody might want this as a "show me
what you can, but limit the amount of work you do" flag.
But as with the prior commit clamping "--count", the results
are basically non-deterministic; you'll get the values from
some commits between `n` and the total number, and you can't
tell which.
And unlike the `--count` case, we can't easily generate the
"real" value from the bitmap values (you can't just walk
back `-n` commits and subtract out the reachable objects
from the boundary commits; the bitmaps for `X` record its
total reachability, so you don't know which objects are
directly from `X` itself, which from `X^`, and so on).
So let's just fallback to the non-bitmap code path in this
case, so we always give a sane answer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you ask rev-list for:
git rev-list --count --use-bitmap-index HEAD
we optimize out the actual traversal and just give you the
number of bits set in the commit bitmap. This is faster,
which is good.
But if you ask to limit the size of the traversal, like:
git rev-list --count --use-bitmap-index -n 100 HEAD
we'll still output the full bitmapped number we found. On
the surface, that might even seem OK. You explicitly asked
to use the bitmap index, and it was cheap to compute the
real answer, so we gave it to you.
But there's something much more complicated going on under
the hood. If we don't have a bitmap directly for HEAD, then
we have to actually traverse backwards, looking for a
bitmapped commit. And _that_ traversal is bounded by our
`-n` count.
This is a good thing, because it bounds the work we have to
do, which is probably what the user wanted by asking for
`-n`. But now it makes the output quite confusing. You might
get many values:
- your `-n` value, if we walked back and never found a
bitmap (or fewer if there weren't that many commits)
- the actual full count, if we found a bitmap root for
every path of our traversal with in the `-n` limit
- any number in between! We might have walked back and
found _some_ bitmaps, but then cut off the traversal
early with some commits not accounted for in the result.
So you cannot even see a value higher than your `-n` and say
"OK, bitmaps kicked in, this must be the real full count".
The only sane thing is for git to just clamp the value to a
maximum of the `-n` value, which means we should output the
exact same results whether bitmaps are in use or not.
The test in t5310 demonstrates this by using `-n 1`.
Without this patch we fail in the full-bitmap case (where we
do not have to traverse at all) but _not_ in the
partial-bitmap case (where we have to walk down to find an
actual bitmap). With this patch, both cases just work.
I didn't implement the crazy in-between case, just because
it's complicated to set up, and is really a subset of the
full-count case, which we do cover.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find a blob at "a/b/c", we currently pass this to
our show_object_fn callbacks as two components: "a/b/" and
"c". Callbacks which want the full value then call
path_name(), which concatenates the two. But this is an
inefficient interface; the path is a strbuf, and we could
simply append "c" to it temporarily, then roll back the
length, without creating a new copy.
So we could improve this by teaching the callsites of
path_name() this trick (and there are only 3). But we can
also notice that no callback actually cares about the
broken-down representation, and simply pass each callback
the full path "a/b/c" as a string. The callback code becomes
even simpler, then, as we do not have to worry about freeing
an allocated buffer, nor rolling back our modification to
the strbuf.
This is theoretically less efficient, as some callbacks
would not bother to format the final path component. But in
practice this is not measurable. Since we use the same
strbuf over and over, our work to grow it is amortized, and
we really only pay to memcpy a few bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we left name_path as a thin wrapper
around a strbuf. This patch drops it entirely. As a result,
every show_object_fn callback needs to be adjusted. However,
none of their code needs to be changed at all, because the
only use was to pass it to path_name(), which now handles
the bare strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we find a blob at "a/b/c", we currently pass this to
our show_object_fn callbacks as two components: "a/b/" and
"c". Callbacks which want the full value then call
path_name(), which concatenates the two. But this is an
inefficient interface; the path is a strbuf, and we could
simply append "c" to it temporarily, then roll back the
length, without creating a new copy.
So we could improve this by teaching the callsites of
path_name() this trick (and there are only 3). But we can
also notice that no callback actually cares about the
broken-down representation, and simply pass each callback
the full path "a/b/c" as a string. The callback code becomes
even simpler, then, as we do not have to worry about freeing
an allocated buffer, nor rolling back our modification to
the strbuf.
This is theoretically less efficient, as some callbacks
would not bother to format the final path component. But in
practice this is not measurable. Since we use the same
strbuf over and over, our work to grow it is amortized, and
we really only pay to memcpy a few bytes.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the previous commit, we left name_path as a thin wrapper
around a strbuf. This patch drops it entirely. As a result,
every show_object_fn callback needs to be adjusted. However,
none of their code needs to be changed at all, because the
only use was to pass it to path_name(), which now handles
the bare strbuf.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert all instances of get_object_hash to use an appropriate reference
to the hash member of the oid member of struct object. This provides no
functional change, as it is essentially a macro substitution.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
struct object is one of the major data structures dealing with object
IDs. Convert it to use struct object_id instead of an unsigned char
array. Convert get_object_hash to refer to the new member as well.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Convert most instances where the sha1 member of struct object is
dereferenced to use get_object_hash. Most instances that are passed to
functions that have versions taking struct object_id, such as
get_sha1_hex/get_oid_hex, or instances that can be trivially converted
to use struct object_id instead, are not converted.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Jeff King <peff@peff.net>
Before sha1_to_hex_r() existed, a simple way to get hex
sha1 into a buffer was with:
strcpy(buf, sha1_to_hex(sha1));
This isn't wrong (assuming the buf is 41 characters), but it
makes auditing the code base for bad strcpy() calls harder,
as these become false positives.
Let's convert them to sha1_to_hex_r(), and likewise for
some calls to find_unique_abbrev(). While we're here, we'll
double-check that all of the buffers are correctly sized,
and use the more obvious GIT_SHA1_HEXSZ constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rev-list command does not have the internal
infrastructure to display notes. Running:
git rev-list --notes HEAD
will silently ignore the "--notes" option. Running:
git rev-list --notes --grep=. HEAD
will crash on an assert. Running:
git rev-list --format=%N HEAD
will place a literal "%N" in the output (it does not even
expand to an empty string).
Let's have rev-list tell the user that it cannot fill the
user's request, rather than silently producing wrong data.
Likewise, let's remove mention of the notes options from the
rev-list documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reachability bitmaps do not have enough information to
tell us which commits might have changed path "foo", so the
current code produces wrong answers for:
git rev-list --use-bitmap-index --count HEAD -- foo
(it silently ignores the "foo" limiter). Instead, we should
fall back to doing a normal traversal (it is OK to fall
back rather than complain, because --use-bitmap-index is a
pure optimization, and might not kick in for other reasons,
such as there being no bitmaps in the repository).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--count should be mentioned in the usage guide, this updates code and
documentation.
Signed-off-by: Lawrence Siebert <lawrencesiebert@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most callsites which use the commit buffer try to use the
cached version attached to the commit, rather than
re-reading from disk. Unfortunately, that interface provides
only a pointer to the NUL-terminated buffer, with no
indication of the original length.
For the most part, this doesn't matter. People do not put
NULs in their commit messages, and the log code is happy to
treat it all as a NUL-terminated string. However, some code
paths do care. For example, when checking signatures, we
want to be very careful that we verify all the bytes to
avoid malicious trickery.
This patch just adds an optional "size" out-pointer to
get_commit_buffer and friends. The existing callers all pass
NULL (there did not seem to be any obvious sites where we
could avoid an immediate strlen() call, though perhaps with
some further refactoring we could).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some call sites check commit->buffer to see whether we have
a cached buffer, and if so, do some work with it. In the
long run we may want to switch these code paths to make
their decision on a different boolean flag (because checking
the cache may get a little more expensive in the future).
But for now, we can easily support them by converting the
calls to use get_cached_commit_buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This converts two lines into one at each caller. But more
importantly, it abstracts the concept of freeing the buffer,
which will make it easier to change later.
Note that we also need to provide a "detach" mechanism for a
tricky case in index-pack. We are passed a buffer for the
object generated by processing the incoming pack. If we are
not using --strict, we just calculate the sha1 on that
buffer and return, leaving the caller to free it. But if we
are using --strict, we actually attach that buffer to an
object, pass the object to the fsck functions, and then
detach the buffer from the object again (so that the caller
can free it as usual). In this case, we don't want to free
the buffer ourselves, but just make sure it is no longer
associated with the commit.
Note that we are making the assumption here that the
attach/detach process does not impact the buffer at all
(e.g., it is never reallocated or modified). That holds true
now, and we have no plans to change that. However, as we
abstract the commit_buffer code, this dependency becomes
less obvious. So when we detach, let's also make sure that
we get back the same buffer that we gave to the
commit_buffer code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Borrow the bitmap index into packfiles from JGit to speed up
enumeration of objects involved in a commit range without having to
fully traverse the history.
* jk/pack-bitmap: (26 commits)
ewah: unconditionally ntohll ewah data
ewah: support platforms that require aligned reads
read-cache: use get_be32 instead of hand-rolled ntoh_l
block-sha1: factor out get_be and put_be wrappers
do not discard revindex when re-preparing packfiles
pack-bitmap: implement optional name_hash cache
t/perf: add tests for pack bitmaps
t: add basic bitmap functionality tests
count-objects: recognize .bitmap in garbage-checking
repack: consider bitmaps when performing repacks
repack: handle optional files created by pack-objects
repack: turn exts array into array-of-struct
repack: stop using magic number for ARRAY_SIZE(exts)
pack-objects: implement bitmap writing
rev-list: add bitmap mode to speed up object lists
pack-objects: use bitmaps when packing objects
pack-objects: split add_object_entry
pack-bitmap: add support for bitmap indexes
documentation: add documentation for the bitmap format
ewah: compressed bitmap implementation
...
The bitmap reachability index used to speed up the counting objects
phase during `pack-objects` can also be used to optimize a normal
rev-list if the only thing required are the SHA1s of the objects during
the list (i.e., not the path names at which trees and blobs were found).
Calling `git rev-list --objects --use-bitmap-index [committish]` will
perform an object iteration based on a bitmap result instead of actually
walking the object graph.
These are some example timings for `torvalds/linux` (warm cache,
best-of-five):
$ time git rev-list --objects master > /dev/null
real 0m34.191s
user 0m33.904s
sys 0m0.268s
$ time git rev-list --objects --use-bitmap-index master > /dev/null
real 0m1.041s
user 0m0.976s
sys 0m0.064s
Likewise, using `git rev-list --count --use-bitmap-index` will speed up
the counting operation by building the resulting bitmap and performing a
fast popcount (number of bits set on the bitmap) on the result.
Here are some sample timings of different ways to count commits in
`torvalds/linux`:
$ time git rev-list master | wc -l
399882
real 0m6.524s
user 0m6.060s
sys 0m3.284s
$ time git rev-list --count master
399882
real 0m4.318s
user 0m4.236s
sys 0m0.076s
$ time git rev-list --use-bitmap-index --count master
399882
real 0m0.217s
user 0m0.176s
sys 0m0.040s
This also respects negative refs, so you can use it to count
a slice of history:
$ time git rev-list --count v3.0..master
144843
real 0m1.971s
user 0m1.932s
sys 0m0.036s
$ time git rev-list --use-bitmap-index --count v3.0..master
real 0m0.280s
user 0m0.220s
sys 0m0.056s
Though note that the closer the endpoints, the less it helps. In the
traversal case, we have fewer commits to cross, so we take less time.
But the bitmap time is dominated by generating the pack revindex, which
is constant with respect to the refs given.
Note that you cannot yet get a fast --left-right count of a symmetric
difference (e.g., "--count --left-right master...topic"). The slow part
of that walk actually happens during the merge-base determination when
we parse "master...topic". Even though a count does not actually need to
know the real merge base (it only needs to take the symmetric difference
of the bitmaps), the revision code would require some refactoring to
handle this case.
Additionally, a `--test-bitmap` flag has been added that will perform
the same rev-list manually (i.e. using a normal revwalk) and using
bitmaps, and verify that the results are the same. This can be used to
exercise the bitmap code, and also to verify that the contents of the
.bitmap file are sane.
Signed-off-by: Vicent Marti <tanoku@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Correct all hits from
git grep -e '\(&&\|||\)[^ ]' -e '[^ ]\(&&\|||\)' -- '*.c'
i.e. && or || operators that are followed by anything but a SP,
or that follow something other than a SP or a HT, so that these
operators have a SP around it when necessary.
We usually refrain from making this kind of a tree-wide change in
order to avoid unnecessary conflicts with other "real work" patches,
but in this case, the end result does not have a potentially
cumbersome tree-wide impact, while this is a tree-wide cleanup.
Fixes to compat/regex/regcomp.c and xdiff/xemit.c are to replace a
HT immediately after && with a SP.
This is based on Felipe's patch to bultin/symbolic-ref.c; I did all
the finding out what other files in the whole tree need to be fixed
and did the fix and also the log message while reviewing that single
liner, so any screw-ups in this version are mine.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
mark_edges_uninteresting() is always called with this form
mark_edges_uninteresting(revs->commits, revs, ...);
Remove the first argument and let mark_edges_uninteresting figure that
out by itself. It helps answer the question "are this commit list and
revs related in any way?" when looking at mark_edges_uninteresting
implementation.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One can set an alias
$ git config [--global] alias.lg "log --graph --pretty=format:'%Cred%h%Creset
-%C(yellow)%d%Creset %s %Cgreen(%cd) %C(bold blue)<%an>%Creset'
--abbrev-commit --date=local"
to see the log as a pretty tree (like *gitk* but in a terminal).
However, log messages written in an encoding i18n.commitEncoding which differs
from terminal encoding are shown corrupted even when i18n.logOutputEncoding
and terminal encoding are the same (e.g. log messages committed on a Cygwin box
with Windows-1251 encoding seen on a Linux box with a UTF-8 encoding and vice versa).
To simplify an example we can say the following two commands are expected
to give the same output to a terminal:
$ git log --oneline --no-color
$ git log --pretty=format:'%h %s'
However, the former pays attention to i18n.logOutputEncoding
configuration, while the latter does not when it formats "%s".
The same corruption is true for
$ git diff --submodule=log
and
$ git rev-list --pretty=format:%s HEAD
and
$ git reset --hard
This patch makes pretty --format honor logOutputEncoding when it formats
log message.
Signed-off-by: Alexey Shumkin <Alex.Crezoff@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is used by bisect.c, part of libgit.a while it stays in
builtin/rev-list.c. Move it to commit.c so that we won't get undefined
reference if a program that uses libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This function is used by bisect.c, part of libgit.a while
estimate_bisect_steps stays in builtin/rev-list.c. Move it to bisect.a
so we won't have undefine reference if a standalone program that uses
libgit.a happens to pull it in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Gives a better DWIM behaviour for --pretty=format:%gd, "stash list", and
"log -g", depending on how the starting point ("master" vs "master@{0}" vs
"master@{now}") and date formatting options (e.g. "--date=iso") are given
on the command line.
By Jeff King (4) and Junio C Hamano (1)
* jk/maint-reflog-walk-count-vs-time:
reflog-walk: tell explicit --date=default from not having --date at all
reflog-walk: always make HEAD@{0} show indexed selectors
reflog-walk: clean up "flag" field of commit_reflog struct
log: respect date_mode_explicit with --format:%gd
t1411: add more selector index/date tests
When we show a reflog selector (e.g., via "git log -g"), we
perform some DWIM magic: while we normally show the entry's
index (e.g., HEAD@{1}), if the user has given us a date
with "--date", then we show a date-based select (e.g.,
HEAD@{yesterday}).
However, we don't want to trigger this magic if the
alternate date format we got was from the "log.date"
configuration; that is not sufficiently strong context for
us to invoke this particular magic. To fix this, commit
f4ea32f (improve reflog date/number heuristic, 2009-09-24)
introduced a "date_mode_explicit" flag in rev_info. This
flag is set only when we see a "--date" option on the
command line, and we a vanilla date to the reflog code if
the date was not explicit.
Later, commit 8f8f547 (Introduce new pretty formats %g[sdD]
for reflog information, 2009-10-19) added another way to
show selectors, and it did not respect the date_mode_explicit
flag from f4ea32f.
This patch propagates the date_mode_explicit flag to the
pretty-print code, which can then use it to pass the
appropriate date field to the reflog code. This brings the
behavior of "%gd" in line with the other formats, and means
that its output is independent of any user configuration.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --quiet is specified, finish_object() is called instead of
show_object(). The latter is in charge of --verify-objects and
will be skipped if --quiet is specified.
Move the code up to finish_object(). Also pass the quiet flag along
and make it always call show_* functions to avoid similar problems in
future.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
