* rj/config-cygwin:
config.c: Make git_config() work correctly when called recursively
t1301-*.sh: Fix the 'forced modes' test on cygwin
help.c: Fix detection of custom merge strategy on cygwin
* fg/submodule-keep-updating:
git-submodule.sh: clarify the "should we die now" logic
submodule update: continue when a checkout fails
git-sh-setup: add die_with_status
Conflicts:
git-submodule.sh
* an/shallow-doc:
Document the underlying protocol used by shallow repositories and --depth commands.
Fix documentation of fetch-pack that implies that the client can disconnect after sending wants.
The documentation for logging updates in git-update-ref, doesn't make it
clear that only a specific subset of refs are honored by this variable.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
10c4c88 (Allow add_path() to add non-existent directories to the path,
2008-07-21) introduced get_pwd_cwd() function in order to favor $PWD when
getenv("PWD") and getcwd() refer to the same directory but are different
strings (e.g. the former gives a nicer looking name via a symbolic link to
an uglier looking automounted path). The function tried to determine if
two directories are the same by running stat(2) on both and comparing
ino/dev fields.
Unfortunately, stat() does not fill any ino or dev fields in msysgit. But
there is a telltale: both ino and dev are 0 when they are not filled
correctly, so let's be extra cautious.
This happens to fix a bug in "get-receive-pack working_directory/" when
the GIT_DIR would not be set correctly due to absolute_path(".")
returning the wrong value.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This optimizes the "recency order" (see pack-heuristics.txt in
Documentation/technical/ directory) used to order objects within a
packfile in three ways:
- Commits at the tip of tags are written together, in the hope that
revision traversal done in incremental fetch (which starts by
putting them in a revision queue marked as UNINTERESTING) will see a
better locality of these objects;
- In the original recency order, trees and blobs are intermixed. Write
trees together before blobs, in the hope that this will improve
locality when running pathspec-limited revision traversal, i.e.
"git log paths...";
- When writing blob objects out, write the whole family of blobs that use
the same delta base object together, by starting from the root of the
delta chain, and writing its immediate children in a width-first
manner, in the hope that this will again improve locality when reading
blobs that belong to the same path, which are likely to be deltified
against each other.
I tried various workloads in the Linux kernel repositories (HEAD at
v3.0-rc6-71-g4dd1b49) packed with v1.7.6 and with this patch, counting how
large seeks are needed between adjacent accesses to objects in the pack,
and the result looks promising. The history has 2072052 objects, weighing
some 490MiB.
* Simple commit-only log.
$ git log >/dev/null
There are 254656 commits in total.
v1.7.6 with patch
Total number of access : 258,031 258,032
0.0% percentile : 12 12
10.0% percentile : 259 259
20.0% percentile : 294 294
30.0% percentile : 326 326
40.0% percentile : 363 363
50.0% percentile : 415 415
60.0% percentile : 513 513
70.0% percentile : 857 858
80.0% percentile : 10,434 10,441
90.0% percentile : 91,985 91,996
95.0% percentile : 260,852 260,885
99.0% percentile : 1,150,680 1,152,811
99.9% percentile : 3,148,435 3,148,435
Less than 2MiB seek: 99.70% 99.69%
95% of the pack accesses look at data that is no further than 260kB
from the previous location we accessed. The patch does not change the
order of commit objects very much, and the result is very similar.
* Pathspec-limited log.
$ git log drivers/net >/dev/null
The path is touched by 26551 commits and merges (among 254656 total).
v1.7.6 with patch
Total number of access : 559,511 558,663
0.0% percentile : 0 0
10.0% percentile : 182 167
20.0% percentile : 259 233
30.0% percentile : 357 304
40.0% percentile : 714 485
50.0% percentile : 5,046 3,976
60.0% percentile : 688,671 443,578
70.0% percentile : 319,574,732 110,370,100
80.0% percentile : 361,647,599 123,707,229
90.0% percentile : 393,195,669 128,947,636
95.0% percentile : 405,496,875 131,609,321
99.0% percentile : 412,942,470 133,078,115
99.5% percentile : 413,172,266 133,163,349
99.9% percentile : 413,354,356 133,240,445
Less than 2MiB seek: 61.71% 62.87%
With the current pack heuristics, more than 30% of accesses have to
seek further than 300MB; the updated pack heuristics ensures that less
than 0.1% of accesses have to seek further than 135MB. This is largely
due to the fact that the updated heuristics does not mix blobs and
trees together.
* Blame.
$ git blame drivers/net/ne.c >/dev/null
The path is touched by 34 commits and merges.
v1.7.6 with patch
Total number of access : 178,147 178,166
0.0% percentile : 0 0
10.0% percentile : 142 139
20.0% percentile : 222 194
30.0% percentile : 373 300
40.0% percentile : 1,168 837
50.0% percentile : 11,248 7,334
60.0% percentile : 305,121,284 106,850,130
70.0% percentile : 361,427,854 123,709,715
80.0% percentile : 388,127,343 128,171,047
90.0% percentile : 399,987,762 130,200,707
95.0% percentile : 408,230,673 132,174,308
99.0% percentile : 412,947,017 133,181,160
99.5% percentile : 413,312,798 133,220,425
99.9% percentile : 413,352,366 133,269,051
Less than 2MiB seek: 56.47% 56.83%
The result is very similar to the pathspec-limited log above, which
only looks at the tree objects.
* Packing recent history.
$ (git for-each-ref --format='^%(refname)' refs/tags; echo HEAD) |
git pack-objects --revs --stdout >/dev/null
This should pack data worth 71 commits.
v1.7.6 with patch
Total number of access : 11,511 11,514
0.0% percentile : 0 0
10.0% percentile : 48 47
20.0% percentile : 134 98
30.0% percentile : 332 178
40.0% percentile : 1,386 293
50.0% percentile : 8,030 478
60.0% percentile : 33,676 1,195
70.0% percentile : 147,268 26,216
80.0% percentile : 9,178,662 464,598
90.0% percentile : 67,922,665 965,782
95.0% percentile : 87,773,251 1,226,102
99.0% percentile : 98,011,763 1,932,377
99.5% percentile : 100,074,427 33,642,128
99.9% percentile : 105,336,398 275,772,650
Less than 2MiB seek: 77.09% 99.04%
The long-tail part of the result looks worse with the patch, but
the change helps majority of the access. 99.04% of the accesses
need less than 2MiB of seeking, compared to 77.09% with the current
packing heuristics.
* Index pack.
$ git index-pack -v .git/objects/pack/pack*.pack
v1.7.6 with patch
Total number of access : 2,791,228 2,788,802
0.0% percentile : 9 9
10.0% percentile : 140 89
20.0% percentile : 233 167
30.0% percentile : 322 235
40.0% percentile : 464 310
50.0% percentile : 862 423
60.0% percentile : 2,566 686
70.0% percentile : 25,827 1,498
80.0% percentile : 1,317,862 4,971
90.0% percentile : 11,926,385 119,398
95.0% percentile : 41,304,149 952,519
99.0% percentile : 227,613,070 6,709,650
99.5% percentile : 321,265,121 11,734,871
99.9% percentile : 382,919,785 33,155,191
Less than 2MiB seek: 81.73% 96.92%
As the index-pack command already walks objects in the delta chain
order, writing the blobs out in the delta chain order seems to
drastically improve the locality of access.
Note that a half-a-gigabyte packfile comfortably fits in the buffer cache,
and you would unlikely to see much performance difference on a modern and
reasonably beefy machine with enough memory and local disks. Benchmarking
with cold cache (or over NFS) would be interesting.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When executing an external shell script like `git foo` with a bad
shebang, e.g. "#!/usr/bin/not/existing", execvp returns 127 (ENOENT).
Since help_unknown_cmd proposes the use of all external commands similar
to the name of the "unknown" command, it suggests the just failed command
again. Stop it and give some advice to the user.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a workload other than "git log" (without pathspec nor any option that
causes us to inspect trees and blobs), the recency pack order is said to
cause the access jump around quite a bit. Add a hook to allow us observe
how bad it is.
"git config core.logpackaccess /var/tmp/pal.txt" will give you the log
in the specified file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* commit 'v1.7.6': (3211 commits)
Git 1.7.6
completion: replace core.abbrevguard to core.abbrev
Git 1.7.6-rc3
Documentation: git diff --check respects core.whitespace
gitweb: 'pickaxe' and 'grep' features requires 'search' to be enabled
t7810: avoid unportable use of "echo"
plug a few coverity-spotted leaks
builtin/gc.c: add missing newline in message
tests: link shell libraries into valgrind directory
t/Makefile: pass test opts to valgrind target properly
sh-i18n--envsubst.c: do not #include getopt.h
Fix typo: existant->existent
Git 1.7.6-rc2
gitweb: do not misparse nonnumeric content tag files that contain a digit
Git 1.7.6-rc1
fetch: do not leak a refspec
t3703: skip more tests using colons in file names on Windows
gitweb: Fix usability of $prevent_xss
gitweb: Move "Requirements" up in gitweb/INSTALL
gitweb: Describe CSSMIN and JSMIN in gitweb/INSTALL
...
* commit 'v1.7.0': (4188 commits)
Git 1.7.0
Fix typo in 1.6.6.2 release notes
Re-fix check-ref-format documentation mark-up
archive documentation: attributes are taken from the tree by default
Documentation: minor fixes to RelNotes-1.7.0
bash: support 'git am's new '--continue' option
filter-branch: Fix error message for --prune-empty --commit-filter
am: switch --resolved to --continue
Update draft release notes to 1.7.0 one more time
Git 1.6.6.2
t8003: check exit code of command and error message separately
check-ref-format documentation: fix enumeration mark-up
Documentation: quote braces in {upstream} notation
t3902: Protect against OS X normalization
blame: prevent a segv when -L given start > EOF
git-push: document all the status flags used in the output
Fix parsing of imap.preformattedHTML and imap.sslverify
git-add documentation: Fix shell quoting example
Revert "pack-objects: fix pack generation when using pack_size_limit"
archive: simplify archive format guessing
...
* commit 'v1.6.0': (2063 commits)
GIT 1.6.0
git-p4: chdir now properly sets PWD environment variable in msysGit
Improve error output of git-rebase
t9300: replace '!' with test_must_fail
Git.pm: Make File::Spec and File::Temp requirement lazy
Documentation: document the pager.* configuration setting
git-stash: improve synopsis in help and manual page
Makefile: building git in cygwin 1.7.0
git-am: ignore --binary option
bash-completion: Add non-command git help files to bash-completion
Fix t3700 on filesystems which do not support question marks in names
Utilise our new p4_read_pipe and p4_write_pipe wrappers
Add p4 read_pipe and write_pipe wrappers
bash completion: Add '--merge' long option for 'git log'
bash completion: Add completion for 'git mergetool'
git format-patch documentation: clarify what --cover-letter does
bash completion: 'git apply' should use 'fix' not 'strip'
t5304-prune: adjust file mtime based on system time rather than file mtime
test-parse-options: use appropriate cast in length_callback
Fix escaping of glob special characters in pathspecs
...
Conflicts:
builtin-checkout.c
As resolve_ref() returns a static buffer that is local to the function,
the caller needs to be sure that it will not have any other calls to the
function before it uses the returned value, or store it away with a
strdup(). The code used old.path to record which branch it used to be on,
so that it can say between which branches the switch took place in the
reflog, but sometimes it failed to do so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been there since textconv existed, but was never
documented. There is some overlap with what's in
gitattributes(5), but it's important to warn in both places
that textconv diffs probably can't be applied.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The process may not even have the standard input open in which case it
will get stuck in an infinite loop to prompt and read nothing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
> As you probably guessed from the specificity of the number, I wrote a
> short program to actually traverse and find the worst skew. It takes
> about 5 seconds to run (unsurprisingly, since it is doing the same full
> traversal that we end up doing in the above numbers). So we could
> "autoskew" by setting up the configuration on clone, and then
> periodically updating it as part of "git gc".
This patch doesn't implement auto-detection of skew, but is the program
I used to calculate, and would provide the basis for such
auto-detection. It would be interesting to see average skew numbers for
popular repositories. You can run it as "git skew --all".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance usability of 'blob_plain' view protection against XSS attacks
(enabled by setting $prevent_xss to true) by serving contents inline
as safe 'text/plain' mimetype where possible, instead of serving with
"Content-Disposition: attachment" to make sure they don't run in
gitweb's security domain.
This patch broadens downgrading to 'text/plain' further, to any
*/*+xml mimetype. This includes:
application/xhtml+xml (*.xhtml, *.xht)
application/atom+xml (*.atom)
application/rss+xml (*.rss)
application/mathml+xm (*.mathml)
application/docbook+xml (*.docbook)
image/svg+xml (*.svg, *.svgz)
Probably most useful is serving XHTML files as text/plain in
'blob_plain' view, directly viewable.
Because file with 'image/svg+xml' mimetype can be compressed SVGZ
file, we have to check if */*+xml really is text file, via '-T $fd'.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of mechanism enabled by setting $prevent_xss to true is 'blob_plain'
view protection. With XSS prevention on, blobs of all types except a
few known safe ones are served with "Content-Disposition: attachment" to
make sure they don't run in our security domain.
Instead of serving text/* type files, except text/plain (and including
text/html), as attachements, downgrade it to text/plain. This way HTML
pages in 'blob_plain' (raw) view would be displayed in browser, but
safely as a source, and not asked to be saved.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. The user-supplied
command supplied to 'submodule foreach' is spawned within a while loop
which is being piped into. Due to the way shells implement piping output
to a while loop, a subshell is created with its standard input attached to
the output of the pipe. This results in all of the commands executed
within the while loop to have their stdins modified in the same way,
including the user-supplied command.
This can cause a problem if the command requires reading from stdin or if
it changes its behavior based on whether stdin is a tty or not. For
example, this problem was noticed when trying to execute the following:
git submodule foreach git shortlog --since=two.weeks.ago
which printed a message about entering the first submodule and produced no
further output and exited with a status of zero. In this case, shortlog
detected that it was not connected to a tty, and since no revision was
supplied as an argument, it attempted to read the list of revisions from
standard input. Instead, it slurped up the list of submodules that was
being piped to the enclosing while loop and caused that loop to end early
without processing the remaining submodules.
Work around this behavior by saving the original standard input file
descriptor before the while loop, and restoring it when spawning the
user-supplied command.
This fixes the tests in t7407.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user-supplied command spawned by 'submodule foreach' loses its
connection to the original standard input. Instead, it is connected to the
output of a pipe within the git-submodule script. This can cause a problem
if the command requires reading from stdin or if it changes its behavior
based on whether stdin is a tty or not (e.g. git shortlog). Demonstrate
this flaw.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/streaming-filter:
t0021: test application of both crlf and ident
t0021-conversion.sh: fix NoTerminatingSymbolAtEOF test
streaming: filter cascading
streaming filter: ident filter
Add LF-to-CRLF streaming conversion
stream filter: add "no more input" to the filters
Add streaming filter API
convert.h: move declarations for conversion from cache.h
* jn/gitweb-js-blame:
gitweb.js: use setTimeout rather than setInterval in blame_incremental.js
gitweb.js: No need for loop in blame_incremental's handleResponse()
gitweb.js: No need for inProgress in blame_incremental.js
* da/git-prefix-everywhere:
t/t7503-pre-commit-hook.sh: Add GIT_PREFIX tests
git-mergetool--lib: Make vimdiff retain the current directory
git: Remove handling for GIT_PREFIX
setup: Provide GIT_PREFIX to built-ins
* jc/streaming:
sha1_file: use the correct type (ssize_t, not size_t) for read-style function
streaming: read loose objects incrementally
sha1_file.c: expose helpers to read loose objects
streaming: read non-delta incrementally from a pack
streaming_write_entry(): support files with holes
convert: CRLF_INPUT is a no-op in the output codepath
streaming_write_entry(): use streaming API in write_entry()
streaming: a new API to read from the object store
write_entry(): separate two helper functions out
unpack_object_header(): make it public
sha1_object_info_extended(): hint about objects in delta-base cache
sha1_object_info_extended(): expose a bit more info
packed_object_info_detail(): do not return a string
* ef/maint-win-verify-path:
verify_dotfile(): do not assume '/' is the path seperator
verify_path(): simplify check at the directory boundary
verify_path: consider dos drive prefix
real_path: do not assume '/' is the path seperator
A Windows path starting with a backslash is absolute
* js/i18n-windows:
Windows: teach getenv to do a case-sensitive search
mingw.c: move definition of mingw_getenv down
sh-i18n--envsubst: do not crash when no arguments are given
* jk/combine-diff-binary-etc:
combine-diff: respect textconv attributes
refactor get_textconv to not require diff_filespec
combine-diff: handle binary files as binary
combine-diff: calculate mode_differs earlier
combine-diff: split header printing into its own function
* 'instaweb' of git://bogomips.org/git-svn:
git-instaweb: Check that correct config file exists for (re)start
git-instaweb: Move all actions at the end of script
git-instaweb: Use $conf, not $fqgitdir/gitweb/httpd.conf
git-instaweb: Extract configuring web server into configure_httpd
Some tests try to be too careful about cleaning themselves up and
do
test_expect_success description '
set-up some test refs and/or configuration &&
test_when_finished "revert the above changes" &&
the real test
'
Which is nice to make sure that a potential failure would not have
unexpected interaction with the next test. This however interferes when
"the real test" fails and we want to see what is going on, by running the
test with --immediate mode and descending into its trash directory after
the test stops. The precondition to run the real test and cause it to fail
is all gone after the clean-up procedure defined by test_when_finished is
done.
Update test_run_ which is the workhorse of running a test script
called from test_expect_success and test_expect_failure, so that we do not
run clean-up script defined with test_when_finished when a test that is
expected to succeed fails under the --immediate mode.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Jeff King <peff@peff.net>
Since 03feddd (git-check-ref-format: reject funny ref names, 2005-10-13),
"git branch -d" can take more than one branch names to remove.
The documentation was correct, but the usage string was not.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a non-existent branch was specified to be rebased, the complete
usage information is printed after the error message that carries the
relevant piece of information:
$ git rebase master topci
fatal: no such branch: topci
usage: git rebase [-i] [options] [--onto <newbase>] [<upstream>] [<branch>]
or: git rebase [-i] [options] --onto <newbase> --root [<branch>]
or: git-rebase [-i] --continue | --abort | --skip
Available options are
[30 lines of usage stripped]
The error message was introduced recently by 4ac5356c (rebase: give a
better error message for bogus branch, 2011-01-27), and the result was
acceptable because the usage text was just two lines. But 45e2acf3
(rebase: define options in OPTIONS_SPEC, 2011-02-28) made things worse
because the usage text is now 35 lines.
Just drop the usage information because it does not add value to the
error message.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As explained in v1.7.3-rc0~13^2 (Work around em-dash handling in newer
AsciiDoc, 2010-08-23), if double dashes in names of commands are not
escaped, AsciiDoc renders them as em dashes.
While fixing that, spell the command name as "git sh-i18n--envsubst"
(2 words) instead of emphasizing the name of the binary (one
hyphenated name) and format it in italics.
The double-dash in the title should be escaped, too, to avoid spurious
em dashes in the header:
.TH "GIT\-SH\-I18N\(emENVSUB" "1" "06/26/2011" "Git 1\&.7\&.6" "Git Manual"
AsciiDoc 8.6.4 with DocBook XSL 1.76.0-RC1 copes fine and writes
"GIT\-SH\-I18N\-\-ENVSUB" even without this change, which is why it
was missed before.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
AsciiDoc versions since 5.0.6 treat a double-dash surrounded by spaces
(outside of verbatim environments) as a request to insert an em dash.
Such versions also treat the three-character sequence "\--", when not
followed by another dash, as a request to insert two literal minus
signs. Thus from time to time there have been patches to add
backslashes to AsciiDoc markup to escape double-dashes that are meant
to be represent '--' characters used literally on the command line;
see v1.4.0-rc1~174, Fix up docs where "--" isn't displayed correctly,
2006-05-05, for example.
AsciiDoc 6.0.3 (2005-04-20) made life harder by also treating
double-dashes without surrounding whitespace as markup for an em dash,
though only when formatting for backends other than the manpages
(e.g., HTML). Many pages needed to be changed to use a backslash
before the "--" in names of command-line flags like "--add" (see
v0.99.6~37, Update tutorial, 2005-08-30).
AsciiDoc 8.3.0 (2008-11-29) refined the em-dash rule to avoid that
requirement. Double-dashes without surrounding spaces are not
rendered as em dashes any more unless bordered on both sides by
alphanumeric characters. The unescaped markup for option names (e.g.,
"--add") works fine, and many instances of this style have leaked into
Documentation/; git's HTML documentation contains many spurious em
dashes when formatted by an older toolchain. (This patch will not
change that.)
The upshot: "--" as an isolated word and in phrases like "git
web--browse" must be escaped if it is not to be rendered as an em dash
by current asciidoc. Use "\--" to avoid such misformatting in
sentences in which "--" represents a literal double-minus command line
argument that separates options and revs from pathspecs, and use
"{litdd}" in cases where the double-dash is embedded in the command
name. The latter is just for consistency with v1.7.3-rc0~13^2 (Work
around em-dash handling in newer AsciiDoc, 2010-08-23).
List of lines to fix found by grepping manpages for "(em".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
