* lh/submodule:
gitmodules(5): remove leading period from synopsis
Add gitmodules(5)
git-submodule: give submodules proper names
Rename sections from "module" to "submodule" in .gitmodules
git-submodule: remember to checkout after clone
t7400: barf if git-submodule removes or replaces a file
It turns out that the attribute definition we have had for a
long time to hide "^" character from AsciiDoc 7 was not honored
by AsciiDoc 8 even under "-a asciidoc7compatible" mode. There is
a similar breakage with the "compatible" mode with + characters.
The double colon at the end of definition list term needs
to be attached to the term, without a whitespace. After this
minimum fixups, AsciiDoc 8 (I used 8.2.1 on Debian) with
compatibility mode seems to produce reasonably good results.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of using sed on the resulting file, we now have a
git_version asciidoc attribute. This means that we don't
pipe the output of asciidoc, which means we can detect build
failures.
Problem reported by Scott Lamb, solution suggested by Jonas Fonseca.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Documentation: tighten dependency for git.{html,txt}
Makefile: iconv() on Darwin has the old interface
t5300-pack-object.sh: portability issue using /usr/bin/stat
t3200-branch.sh: small language nit
usermanual.txt: some capitalization nits
Make builtin-branch.c handle the git config file
rename_ref(): only print a warning when config-file update fails
Distinguish branches by more than case in tests.
Avoid composing too long "References" header.
cvsimport: Improve formating consistency
cvsimport: Reorder options in documentation for better understanding
cvsimport: Improve usage error reporting
cvsimport: Improve documentation of CVSROOT and CVS module determination
cvsimport: sync usage lines with existing options
Conflicts:
Documentation/Makefile
Every time _any_ documentation page changed, cmds-*.txt files
were regenerated, which caused git.{html,txt} to be remade. Try
not to update cmds-*.txt files if their new contents match the
old ones.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Include GIT-VERSION-FILE and replace @@GIT_VERSION@@ in
the HTML and XML asciidoc output. The documentation
doesn't depend on GIT-VERSION-FILE so it will not be
automatically rebuild if nothing else changed.
[jc: fixing the case for interrupted build]
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The sort_glossary.pl script sorts the glossary, checks for duplicates,
and automatically adds cross-references.
But it's not so hard to do all that by hand, and sometimes the automatic
cross-references are a little wrong; so let's run the script one last
time and check in its output.
Note: to make the output fit better into the user manual I also deleted
the acknowledgements at the end, which was maybe a little rude; feel
free to object and I can find a different solution.
Cc: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The --nonet option prevents xsltproc from going to the network to find
anything. But it always tries to find them locally first, so for a
user with the necessary docbook stylesheets installed the build will
work just fine without xsltproc attempting to use the network; all
--nonet does is make it fail rather than falling back on that. That
doesn't seem particularly helpful.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
The generated user manual is rather hard to read thanks to the lack of
the css that's supposed to be included from docbook-xsl.css.
I'm totally ignorant of the toolchain; grubbing through xmlto and
related scripts, the easiest way I could find to ensure that the
generated html links to the stylesheet is by calling xsltproc directly.
Maybe there's some better way.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
config.mak.autogen is already there. Without this change it is not
possible to override mandir in config.mak.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds a hook in the Makefile I can use to automatically
include pointers to documentation for older releases when updating
the pages at http://kernel.org/pub/software/scm/git/docs/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow setting the path of asciidoc in only one place when creating
the documentation.
Signed-off-by: Dotan Barak <dotanb@dev.mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It does not seem to need it either and gives an error on FC5 I use
at kernel.org to cut documentation tarballs, so remove it in the
meantime.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is in the hope of giving JBF's user-manual wider exposure.
I am not very happy with trailing whitespaces in the new
document, but let's not worry too much about the formatting
issues for now, but concentrate more on the structure and the
contents.
This adds two new classes (pure-helpers and "Interacting with
Others") to the command list in the main manual page. The
latter class is primarily about foreign SCM interface and is
placed before low-level (plumbing) commands.
Also it promotes a handful commands to mainporcelain category
while demoting some others.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the source of the list of commands and categorization
to the end of Documentation/cmd-list.perl, so that re-categorization
and re-ordering would become easier to manage.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Current README content is way too esoteric for someone looking at GIT
for the first time. Instead it should provide a quick summary of what
GIT is with a few pointers to other resources.
The bulk of the previous README content is moved to
Documentation/core-intro.txt.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The goals are:
- Readable from beginning to end in order without having read
any other git documentation beforehand.
- Helpful section names and cross-references, so it's not too
hard to skip around some if you need to.
- Organized to allow it to grow much larger (unlike the
tutorials)
It's more liesurely than tutorial.txt, but tries to stay focused on
practical how-to stuff. It adds a discussion of how to resolve merge
conflicts, and partial instructions on setting up and dealing with a
public repository.
I've lifted a little bit from "branching and merging" (e.g., some of the
discussion of history diagrams), and could probably steal more if that's
OK. (Similarly anyone should of course feel free to reuse bits of this
if any parts seem more useful than the whole.)
There's a lot of detail on managing branches and using git-fetch, just
because those are essential even to people needing read-only access
(e.g., kernel testers). I think those sections will be much shorter
once the new "git remote" command and the disconnected checkouts are
taken into account.
I do feel bad about adding yet another piece of documentation, but I we
need something that goes through all the basics in a logical order, and
I wasn't seeing how to grow the tutorials into that.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
This adds and uses the install-doc-quick.sh file to
Documentation/, which is usable for people who track either the
'html' or 'man' heads in Junio's repository (prefixed with
'origin/' if cloned locally). You may override this by
specifying DOC_REF in the make environment or in config.mak.
GZ may also be set in the environment (or config.mak) if you
wish to gzip the documentation after installing it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
No need to install manpages as executable. Noticed by Ville Skytt,Ad(B.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The rule for howto/*.html used "$?", which expands to the list of all
newer prerequisites, including asciidoc.conf added by another rule.
"$<" should be used instead.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... to install documentation relative to the path set with configure's
--prefix option.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames man1 and man7 variables to man1dir and man7dir,
according to "Makefile Conventions: Variables for Installation
Directories" in make.info of GNU Make.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Makefiles in subdirectories now use existing value of INSTALL, bindir,
mandir if it is set, allowing those to be set in main Makefile or in
included config.mak. Main Makefile exports variables which it sets.
Accidentally it renames bin to bindir in Documentation/Makefile
(should be bindir from start, but is unused, perhaps to be removed).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As both DESTDIR and the prefix are supposed to be absolute pathnames
they can simply be concatenated without an extra / (like in the main Makefile).
The extra slash may even break installation on Windows.
[jc: adjusted an earlier workaround for this problem in the dist-doc
target in the main Makefile as well. ]
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a sequel to tutorial.txt which discusses the index file and
the object database.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Adds an xsl fragment to render docbook callouts when
converting to man page format. Update the Makefile
to have "xmlto" use it when generating man pages.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
In particular, git-tools.txt isn't a manpage, and my Asciidoc gets upset
by it. The simplest fix is to Remove articles from the list of manpages
the Makefile.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
asciidoc 7.0.4 and newer considers such includes from parent directory
unsafe.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We forgot to update the primary link from git.html leading to
the tutorial, and also forgot to build and install the renamed
core-tutorial document.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/Makefile spent a lot of time to generate include
dependencies, which was quite noticeable especially during "make clean".
Rewrite it to generate just a single dependency file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Refactored fetch options into separate fetch-options.txt.
Made git-merge use merge-options.
Made git-fetch use fetch-options.
Made git-pull use merge-options and fetch-options.
Added --help option to git-pull and git-format-patch scripts.
Rewrote Documentation/Makefile to dynamically determine
include dependencies.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
exports $prefix and makes Documentation/Makefile following it also.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Randal L. Schwartz noticed that 'make install' does not rebuild what
is installed. Make the 'install' rule depend on 'man'.
I noticed also 'touch' of the source files were used to express include
dependencies, which is a no-no. Rewrite it to do dependencies properly,
and add missing include dependencies while we are at it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduce an asciidoc.conf file with the purpose of adding a gitlink:
macro which will improve the manpage output.
Original cogito patch by Jonas Fonseca <fonseca@diku.dk>;
asciidoc.conf from that patch was further enhanced to use the proper
DocBook tag <citerefentry> for references to man pages.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... in order to please Solaris 'install'. GNU install is not harmed
with this.
[jc: Documentation/Makefile also fixed.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
