When the wiki uses e.g. LDAP for authentication, the web interface shows
a popup to allow the user to chose an authentication domain, and we need
to use lgdomain in the API at login time.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have a check that no new revisions are on the wiki at the
beginning of the push, but this didn't handle concurrent accesses to the
wiki.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a whitespace issue (no space before :) and remove unused %status in
mw_push.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the sample post-commit and post-receive hooks. The sample
post-commit doesn't contain any sample functionality and the comments do
not provide more information than already found in the documentation.
The sample post-receive hooks doesn't provide any sample functionality
either and refers in the comments to a contrib hook that might be
installed in different locations on different systems, which isn't that
helpful.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing the contrib hooks into /usr/share/doc/ wasn't a good idea in the
first place. According to the Debian policy they should be located in
/usr/share/git-core/, so let's put them there.
Thanks to Bill Allombert for reporting this through
http://bugs.debian.org/640949
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier code wanted to run merge_file and prompt_after_failed_merge
both of which wanted to read from the standard input of the entire
script inside a while loop, which read from a pipe, and in order to
do so, it redirected the original standard input to another file
descriptor. We no longer need to do so after the previous change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mergetool now treats its path arguments as a pathspec (like other git
subcommands), restricting action to the given files and directories.
Files matching the pathspec are filtered so mergetool only acts on
unmerged paths; previously it would assume each path argument was in an
unresolved state, and get confused when it couldn't check out their
other stages.
Running "git mergetool subdir" will prompt to resolve all conflicted
blobs under subdir.
Signed-off-by: Jonathon Mah <me@JonathonMah.com>
Acked-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix another instance of a recursive merge incorrectly paying attention to
the working tree file during a virtual ancestor merge, that resulted in
spurious and useless "addinfo_cache failed" error message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option causes check-attr to consider .gitattributes only from
the index, ignoring .gitattributes from the working tree. This allows
the command to be used in situations where a working tree does not exist.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff -p" piped to external diffstat and "git diff --stat" may see
different patch text (both are valid and describe the same change
correctly) when counting the number of added and deleted lines, arriving
at different results to confuse the users, as --stat/--numstat codepath
always uses the hardcoded -U0 as the context length.
Make --stat/--numstat codepath to honor the context length the same way
as the textual patch codepath does to avoid this problem.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_one_patchid() uses a rather dumb heuristic to determine if the
passed buffer is part of the next commit. Whenever the first 40 bytes
are a valid hexadecimal sha1 representation, get_one_patchid() returns
next_sha1.
Once the current line is longer than the fixed buffer, this will break
(provided the additional bytes make a valid hexadecimal sha1). As a result
patch-id returns incorrect results. Instead, use strbuf and read one line
at a time.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of .git/info/sparse-checkout and
skip-worktree is exactly the opposite of what is true, which is:
If a file matches a pattern in sparse-checkout, then (it is to be
checked out and therefore) skip-worktree is unset for that file;
otherwise, it is set (so that it is not checked out).
Currently, the opposite is documented, and (consistently) read-tree's
behavior with respect to bit flips is descibed incorrectly.
Fix it.
In hindsight, it would have been much better to have a "sparse-ignore"
or "sparse-skip" file so that an empty file would mean a full checkout,
and the file logic would be analogous to that of .gitignore, excludes
and skip-worktree.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a few missing articles and such, and mark-up 'commands' and `files`
appropriately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
display_error_msgs() prints all the errors to stderr already (if any),
followed by "Aborting" (if any) to stdout. Make the latter go to stderr
instead.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git term is 'working tree', so replace the most public references
to 'working copy'.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9159 relies on the command-line syntax of svn >= 1.5. Given the
declining install base of older svn versions, it is not worth our time to
support older svn syntax.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'ls-files' refers to 'update-index' to show how the 'assume unchanged'
bit can be seen. This makes the connection 'bi-directional'.
Signed-off-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly fixed already by 6b44577 (mergetool: check return value
from read, 2011-07-01). Catch two uses it missed.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The threading tests turn on format.thread, but never clean
up after themselves, meaning that later tests will also have
format.thread set.
This is more annoying than most leftover config, too,
because not only does it impact the results of other tests,
but it does so non-deterministically. Threading requires the
generation of message-ids, which incorporate the current
time, meaning a slow-running test script may generate
different results from run to run.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the usual "git" transport, a large-ish transfer with "git fetch" and
"git pull" give progress eye-candy to avoid boring users. However, not
when they are reading from a bundle. I.e.
$ git pull ../git-bundle.bndl master
This teaches bundle.c:unbundle() to give "-v" option to index-pack and
tell it to give progress bar when transport decides it is necessary.
The operation in the other direction, "git bundle create", could also
learn to honor --quiet but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1e5814f created t9160-git-svn-mergeinfo-push.sh on 11/9/7
40a1530 created t9160-git-svn-preserve-empty-dirs.sh on 11/7/20
The former test script is renumbered to t9161.
Signed-off-by: Frédéric Heitzmann <frederic.heitzmann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What should happen if you run this command?
$ git ls-remote -h
It does not give a short-help for the command. Instead because "-h" is a
synonym for "--heads", it runs "git ls-remote --heads", and because there
is no remote specified on the command line, we run it against the default
"origin" remote, hence end up doing the same as
$ git ls-remote --heads origin
Fix this counter-intuitive behaviour by special casing a lone "-h" that
does not have anything else on the command line and calling usage().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code, as is, passes control characters, such as form-feed
(^L) to highlight which then passes it through to the browser. User
agents (web browsers) that support 'application/xhtml+xml' usually
require that web pages declared as XHTML and with this mimetype are
well-formed XML. Unescaped control characters cannot appear within a
contents of a valid XML document.
This will cause the browser to display one of the following warnings:
* Safari v5.1 (6534.50) & Google Chrome v13.0.782.112:
This page contains the following errors:
error on line 657 at column 38: PCDATA invalid Char value 12
Below is a rendering of the page up to the first error.
* Mozilla Firefox 3.6.19 & Mozilla Firefox 5.0:
XML Parsing Error: not well-formed
Location:
http://path/to/git/repo/blah/blah
Both errors were generated by gitweb.perl v1.7.3.4 w/ highlight 2.7
using arch/ia64/kernel/unwind.c from the Linux kernel.
When syntax highlighter is not used, control characters are replaced
by esc_html(), but with syntax highlighter they were passed through to
browser (to_utf8() doesn't remove control characters).
Introduce sanitize() subroutine which strips forbidden characters, but
does not perform HTML escaping, and use it in git_blob() to sanitize
syntax highlighter output for XHTML.
Note that excluding "\t" (U+0009), "\n" (U+000A) and "\r" (U+000D) is
not strictly necessary, atleast for currently the only callsite: "\t"
tabs are replaced by spaces by untabify(), "\n" is stripped from each
line before processing it, and replacing "\r" could be considered
improvement.
Originally-by: Christopher M. Fuhrman <cfuhrman@panix.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older asciidoc (e.g. 8.2.5 on Centos 5.5) is unhappy if a manpage does not
have a SYNOPSIS section. Show a sample (and a possibly bogus) command line
of running two commands that pay attention to this environment variable
with a customized value.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jamey Sharp <jamey@minilop.net>
Filter-branch already requires that we have a clean work
tree before starting. However, it failed to refresh the
index before checking, which means it could be wrong in the
case of stat-dirtiness.
Instead of simply adding a call to refresh the index, let's
switch to using the require_clean_work_tree function
provided by git-sh-setup. It does exactly what we want, and
with fewer lines of code and more specific output messages.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It probably is not such a good idea to use ":/<pattern>" to specify which
commit to merge, as ":/<pattern>" can often hit unexpected commits, but
somebody tried it and got a nonsense error message:
fatal: ':/Foo bar' does not point to a commit
So here is a for-the-sake-of-consistency update that is fairly useless
that allows users to carefully try not shooting in the foot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The criss-cross tests kept failing for me because of collisions of 'a'
with 'A' etc. Prefix the lowercase refnames with an extra letter to
disambiguate.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was a pretty straightforward use, so it really doesn't
save that many lines. Still, perhaps it's a little bit more
readable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were using a similar ad-hoc rev_list_args structure, but
this saves some code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the argv_array API exists, we can save some lines
of code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
