Occasionally the target row stuff would scroll the display to some
uninteresting commit while reading. There were two problems: one
was that drawvisible would set targetrow even if there was no target
previously and no row selected, and the other was that it was possible
for the target row to get pushed down past numcommits, if drawvisible
was called after rows were added but before layoutmore got run.
The first problem is fixed by just not setting targetrow/id unless
there is a selected row or they were set previously.
The second problem is fixed by updating numcommits immediately new
rows are added. This leads to a simplification of layoutmore and
chewcommits but also means that some of the things that were done in
layoutmore now need to be done elsewhere, since layoutmore can no
longer use numcommits to know how much it has seen previously.
Hence the changes to getcommits, initlayout and setcanvscroll.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When updating the graph, gitk uses a git log command with commit
limiting in order to get just the new commits. When path limiting
is also in effect, git log rewrites the parents of the commits it
outputs in order to represent just the subgraph that modifies the
listed paths, but it doesn't rewrite the parents on the boundary
of the graph. The result is that when updating, git log does not
give gitk the information about where the new commits join in to
the existing graph.
This solves the problem by explicitly rewriting boundary parents
when updating. If we are updating and are doing path limiting,
then when gitk finds an unlisted commit (one where git log puts a
"-" in front of the commit ID to indicate that it isn't actually
part of the graph), then gitk will execute:
git rev-list --first-parent --max-count=1 $id -- paths...
which returns the first ancestor that affects the listed paths.
(Currently gitk executes this synchronously; it could do it
asynchronously, which would be more complex but would avoid the
possibility of the UI freezing up if git rev-list takes a long time.)
Then, if the result is a commit that we know about, we rewrite the
parents of the children of the original commit to point to the new
commit. That is mostly a matter of adjusting the parents and children
arrays and calling fix_reversal to fix up the graph.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Because we weren't fixing up vlastins when moving an arc from one
place to another, it was possible for us later to decide to move
an arc to the wrong place, and end up with an arc disconnected from
the rest of the graph. This fixes it by updating vlastins when
necessary.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes a bug in updating the graph after we have cherry-picked
a commit in gitk and then added some new stuff externally. First,
we weren't updating viewincl with the new head added by the cherry-
pick. Secondly, getcommitlines was doing bad things if it saw a
commit that was already in the graph (was already in an arc). This
fixes both things. If getcommitlines sees a commit that is already
in the graph, it ignores it unless it was not listed before and is
listed now. In that case it doesn't assign it a new arc now, and
doesn't re-add the commit to its arc.
Signed-off-by: Paul Mackerras <paulus@samba.org>
There is an edit box where the number of context lines can be chosen.
But it was only used when regular diffs were displayed, not for
merge commits. This fixes it.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
It's really not very easy to visualize the commit walker,
because - on purpose - it obvously doesn't show the
uninteresting commits!
We will soon add a "--show-all" flag to the revision walker,
which will make it show uninteresting commits too, and they'll
have a '^' in front of them.
This is to update 'gitk' to show those negative commits in gray
to futureproof it.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The insertrow/removerow functions were really only suitable for
inserting/removing a fake row such as the ones used for showing
the local changes. When used to insert a real new row from a
cherry-pick, they left things in an inconsistent state which then
caused various strange layout errors.
This renames insertrow/removerow to insertfakerow/removefakerow
and adds a new insertrow that does actually go to all the trouble
of creating a new arc and setting it up. This is more work but
keeps things consistent.
This also fixes a bug where cherrypick was not setting mainheadid,
and one where selectline wasn't always resulting in targetrow/id
being set to the selected row/id. Also insert/removefakerow now
adjust numcommits and call setcanvscroll.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When creating a tag through gitk, and the tag name includes a slash (or
slashes), gitk errors out in a popup window. This patch makes gitk use
'git tag' to create the tag instead of modifying files in refs/tags/,
which fixes the issue; if 'git tag' throws an error, gitk pops up with
the error message.
The problem was reported by Frédéric Brière through
http://bugs.debian.org/464104
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Ignoring space changes can be helpful. For example, a commit
claims to only reformat source code and you quickly want to
verify if this claim is true. Or a commit accidentally changes
code formatting and you want to focus on the real changes.
In such cases a button to toggle of whitespace changes would be
quite handy. You could quickly toggle between seeing and
ignoring whitespace changes.
This commit adds such a checkbutton right above the diff view.
However, in general it is a good thing to see whitespace changes
and therefore the state of the checkbutton is not saved. For
example, space changes might happen unintentionally. But they are
real changes yielding different sha1s for the blobs involved.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The "Key bindings" message under the "Help" menu was too long
and could not be parsed by the translation engine.
Fix both issues by translating one line at a time.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Some of the stuff that commit 31c0eaa8cc
added to drawvisible isn't appropriate to do when we have no commits,
and this was causing a Tcl error if gitk was invoked in such a fashion
that no commits were selected. This fixes it by bailing out of
drawvisible early if there are no commits displayed.
Bug reported by Johannes Sixt.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes a bug where changing the commit range or file list for an
existing view and then clicking OK would cause gitk to go into an
infinite loop. The problem was that newviewok was invoking reloadcommits
via "run reloadcommits", but reloadcommits wasn't explicitly returning
0, and whatever it was returning was causing dorunq to run it over
and over again. This fixes it by making reloadcommits return 0.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes gitk select the new commit when cherry-picking, and select
the new checked-out head when resetting or checking out a branch.
This feels more natural because the user is usually more interested
in that commit now than whatever was selected before.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Only Ctrl "=" was bound to increase the font size, probably because
English keyboards have the plus on the same key as the equal sign.
However, not the whole world is English, and at least with some
other keyboard layouts, Ctrl "+" did not work as documented.
Noticed by Stephan Hennig.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Instead of selecting the first commit that appears, this makes gitk
select the currently checked out head, if the user hasn't explicitly
selected some other commit by the time it appears. If the head hasn't
appeared by the time the graph is complete, then we select the first
real commit.
This applies both for graph updates and when the graph is being read
in initially.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The make_disporder function has an optimization where it assumed that
if displayorder was already long enough and the first entry in it for
a particular arc was non-null, then the whole arc was present. This
turns out not to be true in some circumstances, since we can add a
commit to an arc (which truncates displayorder to the previous end of
that arc), then call make_disporder for later arcs (which will pad
displayorder with null elements), then call make_disporder for the
first arc - which won't update the null elements.
This fixes it by changing the optimization to check the last element
for the arc instead of the first.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Despite the name, the --revs-only flag to git rev-parse doesn't make
it output only revision IDs. It makes it output only arguments that
are suitable for giving to git rev-list. So make start_rev_list and
updatecommits cope with arguments output by git rev-parse that aren't
revision IDs. This way we won't get an error when an argument such as
"-300" has been given to gitk and the view is updated.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Have the text fields in the view definition dialog (View->New view...)
use the background color as configured through the preferences, instead
of hard-coded 'white'.
This was suggested by Paul Wise through http://bugs.debian.org/457124
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This means that we don't have to keep clearing them out whenever we
change the row numbers for some commits.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The default options for panedwindows in Tk 8.5 make the sash
virtually invisible -- the handle is not shown and the relief is
flat. This puts the defaults back to showing the handle and a
raised relief on the sash, as in Tk 8.4.
This uses the option command to do this, and also uses the option
command to set the default font for various UI elements to the
UI font ("uifont").
Signed-off-by: Paul Mackerras <paulus@samba.org>
When a fake row is added, we add its (fake) ID to the children list
for its (fake) parent. If renumbervarc were to then renumber the
parent it would incorrectly use the fake child. This avoids the
problem by adding a last_real_child procedure which won't return
a fake ID, and using it in renumbervarc. For symmetry this also adds
a first_real_child procedure and uses it in ordertoken.
Signed-off-by: Paul Mackerras <paulus@samba.org>
First, findmore would sometimes get a Tcl error due to relying on
varcorder and vrownum having valid values for the rows being searched,
but they may not be valid unless update_arcrows is called, so this
makes findmore call update_arcrows if necessary.
Secondly, in the "touching paths" and "adding/removing string" modes,
findmore was treating fhighlights($row) == -1 as meaning the row
matches, whereas it only means that we haven't received an answer from
the external git diff-tree process about it yet. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
* Make sure targetrow is never >= numcommits
* Don't try to do anything about the target row if the targetid is
no longer in the view; it'll just cause Tcl errors
* In insertrow, increment targetrow if we are inserting the fake
commit at or before the target row
* In removerow, if we are removing the target row, make it the next
one instead.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Since commits come in out of order and get sorted as we see them,
we can have commits coming in and being placed before the commits
that are visible in the graph display pane. Previously we just
displayed a certain range of row numbers, meaning that when
incoming commits were placed before the displayed range, the
displayed commits were displaced downwards. This makes it so
that we keep the same set of commits displayed, unless the user
explicitly scrolls the pane, in which case it scrolls as expected.
We do this by having a "target" commit which we try to keep in the
same visible position. If commits have come in before it we scroll
the canvases by the number of rows that it has moved in the display
order.
This also fixes a bug in rowofcommit where it would test
cached_commitrow before possibly calling update_arcrows, which is
where cached_commitrow gets invalidated if things have changed.
Now we call update_arcrows if necessary first.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When updating the display, if the checked-out head has moved on and
isn't currently shown, and there are local changes, we could try to
insert a fake row with a parent that isn't displayed, leading to a
Tcl error. This is because we check whether the checked-out head
is displayed before rereading the references (which is when we discover
that the head has moved). This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
* Fixed a bug that occasionally resulted in Tcl "can't use empty string
as argument to incr" errors - rowofcommit was sometimes not calling
update_arcrows when it needed to.
* Fixed a "no such element in array" error when removing a fake row,
by unsetting currentid and selectedline in removerow if the row we
are removing is the currently selected row.
* Made the "update commits" function always do "reread references".
* Made dodiffindex et al. remove the fake row(s) if necessary.
* Fixed a bug where clicking on a row in the graph display pane didn't
account for horizontal scrolling of the pane.
* Started changing things that cached information based on row numbers
to use commit IDs instead -- this converts the "select line" items
that are put into the history list to use "select by ID" instead.
* Simplified redrawtags a bit, and fixed a bug where it would use the
mainfont for working out how far it extends to the right in the graph
display pane rather than the actual font (which might be bold).
* Fixed a bug where "reread references" wouldn't notice if the currently
checked-out head had changed.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When using translations, the target language must be encoded in utf-8
because almost all target languages will contain non-ascii characters.
For that reason, the non-translated strings should be in utf-8 as well
so that there isn't any encoding mixup inside the program.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This just marks up plain strings, that aren't used in any unusual way.
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
By setting the environment variable GITK_MSGSDIR, one can manually set
the directory where the .msg files are located. This is quite handy
during development with GITK_MSGSDIR=po.
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This restores date mode, which lists commits by date, as far as possible
given the constraint that parents come after all their children. To
implement this in the new framework, we (1) only join a new commit onto
an existing arc if the arc is the last arc created, (2) treat arcs as
seeds unless they have a child arc that comes later, and (3) never
decrease the token value for an arc.
This means we get lots of "seeds", which exposed some quadratic behaviour
in adding and removing seeds. To fix this, we add a vbackptr array, which
points to the arc whose vleftptr entry points to us, and a vlastins array,
which shows where in an arc's vdownptr/vleftptr list we last inserted a
parent, which acts as a hint of a good place to start looking for where to
insert a new child.
This also ensures the children array elements stay in sorted order at all
times. We weren't resorting the children lists when reassigning tokens
in renumbervarc. Since the children lists are now always sorted, we don't
have to search through all elements to find the one with the highest token;
we can just use the last element.
Signed-off-by: Paul Mackerras <paulus@samba.org>
* Add/remove fake commits (for local changes) when updating the view
even if nothing else has changed.
* Get rid of unused getdbg variable.
* Get rid of vseeds and uat.
* Fix bug where removerow would throw a "no such element in array" error.
* Clear out cached highlights when line numbers change.
* Make dodiffindex remove the fake commit rows if they currently exist
but there are now no local changes.
Signed-off-by: Paul Mackerras <paulus@samba.org>
First, update_arcrows was being overly aggressive in trimming
displayorder, resulting in calls to rowofcommit sometimes trimming off
commits that layoutrows had asked for in make_disporder and was relying
on having present. This adds a vrowmod($view) variable that lets
update_arcrows be more precise in trimming off the invalid bits of
displayorder (and it also simplifies the check in make_disporder).
This modifies modify_arc and its callers so that vrowmod($view) is
updated appropriately.
Secondly, we were sometimes calling idcol with $i==-1, which resulted
in a call to ordertoken with the null string. This fixes it by
forcing $i to 0 if it is less than zero.
This also fixes a possible infinite recursion with rowofcommit and
update_arcrows calling each other ad infinitum.
Signed-off-by: Paul Mackerras <paulus@samba.org>
First, if we invalidate the layout for all rows (i.e. from row 0 on),
we were calling undolayout with an empty string as the argument.
Second, the comparison in make_disporder that tests if we need to
call update_arcrows was the wrong way around.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Instead of computing ordertok values and arc row numbers in
getcommitlines, this defers computing them until they are needed.
So getcommitlines no longer calls update_arcrows; instead it gets
called from rowofcommit and make_disporder. Things that modify arcs
now call modify_arc instead of setting vtokmod/varcmod directly,
and modify_arc does the undolayout that used to be in update_arcrows.
Also, idcol and make_idlist now use a new ordertoken function instead
of the ordertok variable. ordertoken uses ordertok as a cache, but
can itself compute the ordering tokens from scratch. This means that
the ordering tokens (and hence the layout of the graph) is once again
determined by the topological ordering we put on the graph, not on the
order in which we see the commits from git log, which improves the
appearance of the graph.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the user specified multiple revisions arguments on the command
line or for a view, we were passing the whole list of arguments to
git rev-parse as a single argument, and thus git rev-parse didn't
interpret it as revisions. This fixes it by adding an eval so the
arguments get passed to git rev-parse as separate arguments.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We weren't setting vtokmod and varcmod in renumbervarc, so after a
call to renumbervarc we sometimes weren't reassigning row numbers to
all the arcs whose row numbers had changed. This fixes it.
This also collapses layoutmore and showstuff into one procedure and
gets rid of the phase variable.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This very large patch implements code to organize the commits from
git log into "arcs" (sequences of commits where each pair of adjacent
commits are the only parent and child of each other), and orders the
arcs so as to get a topological ordering of the commits. This means
we can use git log without --topo-order and display the commits as we
get them, incrementally, which makes the cold-cache start up time much
faster, particularly on unpacked repos.
One beneficial effect of this is that the File->Update menu item now
just adds any new commits to the existing graph instead of rereading
the whole thing from scratch, which is much faster. (If you do want
to reread the whole graph from scratch you can use File->Reload.)
At an implementation level, this means that the displayorder and
parentlist lists are no longer fully valid at all times, and the
commitrow array has gone. New procedures commitinview and commitonrow
replace the commitrow array, and make_disporder ensures that
displayorder and parentlist are valid for a range of rows.
The overall time to load the kernel repository has gone up a bit, from
~9 seconds to ~11 seconds on my G5, but I think that is worth it given
that the time to get a window up with commits displayed in it has gone
from ~3 seconds to under 1 second.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes the radio buttons for selecting whether to see the full diff,
the old version or the new version use the same font as the other user
interface elements.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This unifies findmore and findmorerev, and adds the ability to do
a search with or without wrap around from the end of the list of
commits to the beginning (or vice versa for reverse searches).
findnext and findprev are gone, and the buttons and keys for searching
all call dofind now. dofind doesn't unmark the matches to start with.
Shift-up and shift-down are back by popular request, and the searches
they do don't wrap around. The other keys that do searches (/, ?,
return, M-f) do wrapping searches except for M-g.
Signed-off-by: Paul Mackerras <paulus@samba.org>
First, paths ending in a slash were not matching anything. This fixes
path_filter to handle paths ending in a slash (such entries have to
match a directory, and can't match a file, e.g., foo/bar/ can't match
a plain file called foo/bar).
Secondly, clicking in the file list pane (bottom right) was broken
because $treediffs($ids) contained all the files modified by the
commit, not just those within the file list. This fixes that too.
Signed-off-by: Paul Mackerras <paulus@samba.org>
First, we weren't putting "--" between the ids and the paths in the
git diff-tree/diff-index/diff-files command, so if there was a tag
and a file with the same name, we could get an ambiguity in the
command. This puts the "--" in to make it clear that the paths are
paths.
Secondly, this implements the path limiting for merge diffs as well
as the normal 2-way diffs.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This sets the status window when reading commits, searching through
commits, cherry-picking or checking out a head.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes the reset function use a progress bar in the same location
as the progress bars for reading in commits and for finding commits,
instead of a progress bar in a separate detached window. The progress
bar for resetting is red.
This also puts "Resetting" in the status window while the reset is in
progress. The setting of the status window is done through an
extension of the interface used for setting the watch cursor.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We weren't restoring the tabstop setting if the user pressed the
Cancel button in the Edit/Preferences window. Also improved the
label for the checkbox (made it "Tab spacing" rather than the laconic
"tabstop") and moved it above the "Display nearby tags" checkbox.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When the user has specified a list of paths, either on the command line
or when creating a view, gitk currently displays the diffs for all files
that a commit has modified, not just the ones that match the path list.
This is different from other git commands such as git log. This change
makes gitk behave the same as these other git commands by default, that
is, gitk only displays the diffs for files that match the path list.
There is now a checkbox labelled "Limit diffs to listed paths" in the
Edit/Preferences pane. If that is unchecked, gitk will display the
diffs for all files as before.
When gitk is run with the --merge flag, it will get the list of unmerged
files at startup, intersect that with the paths listed on the command line
(if any), and use that as the list of paths.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes the error reported by Michele Ballabio, where gitk will
throw a Tcl error "can't unset prevlines(...)" when displaying a
commit that has a parent commit listed more than once, and the commit
is the first child of that parent.
The problem was basically that we had two variables, prevlines and
lineends, and were relying on the invariant that prevlines($id) was
set iff $id was in the lineends($r) list for some $r. But having
a duplicate parent breaks that invariant since we end up with the
parent listed twice in lineends.
This fixes it by simplifying the logic to use only a single variable,
lineend. It also rearranges things a little so that we don't try to
draw the line for the duplicated parent twice.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes an error reported by Adam Piątyszek: if the current HEAD
is not in the graph that gitk knows about when we do a cherry-pick
using gitk, then gitk hits an error when trying to update its
internal representation of the topology. This avoids the error by
not doing that update if the HEAD before the cherry-pick was a
commit that gitk doesn't know about.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This checks that we have Tcl/Tk 8.4 or later, and puts up an error
message in a window and quits if not.
This was prompted by a patch submitted by Steffen Prohaska, but is
done a bit differently (this uses package require rather than
looking at [info tclversion], and uses show_error to display the
error rather than printing it to stderr).
Signed-off-by: Paul Mackerras <paulus@samba.org>
A file copy would be detected only if the original file was modified in the
same commit. This implies that there will be a patch listed under the
original file name, and we would expect that clicking the original file
name in the file list warps the patch window to that file's patch. (If the
original file was not modified, the copy would not be detected in the first
place, the copied file would be listed as "new file", and this whole matter
would not apply.)
However, if the name of the copy is sorted after the original file's patch,
then the logic introduced by commit d1cb298b0b (which picks up the link
information from the "copy from" line) would overwrite the link
information that is already present for the original file name, which was
parsed earlier. Hence, this patch reverts part of said commit.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
(Väinö Järvelä supplied this patch a while ago for 1.5.2. It no longer
applied cleanly, so I'm reposting it.)
MacBook doesn't seem to recognize MouseRelease-4 and -5 events, at all.
So i added a support for the MouseWheel event, which i limited to Tcl/tk
aqua, as i couldn't test it neither on Linux or Windows. Tcl/tk needs to
be updated from the version that is shipped with OS X 10.4 Tiger, for
this patch to work.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The logic in stopfinding assumes that findcurline will be set if
find_dirn is, but findnext and findprev can set find_dirn without
setting findcurline. This makes sure we only set find_dirn in those
places if findcurline is already set.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the user specifies 'diff.color = 1' in their configuration file,
then gitk will not start. Disable colours when calling git log.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The only thing that could be specified with diffopts was the number
of lines of context, but there is already a spinbox for that. So
this gets rid of it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We weren't calling showstuff for the last few commits under some
circumstances, causing the scrolling region not to be extended right
to the end of the graph. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds buttons to the edit preferences window to allow the user to
choose the main font, the text font (used for the diff display window)
and the UI font. Pressing those buttons pops up a font chooser window
that lets the user pick the font family, size, weight (bold/normal)
and slant (roman/italic).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Unfortunately there seems to be a bug in Tk8.5 where font actual -size
sometimes gives the wrong answer (e.g. 12 for Bitstream Vera Sans 9),
even though the font is actually displayed at the right size. This
works around it by parsing and storing the family, size, weight and
slant of the mainfont, textfont and uifont explicitly.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This replaces the use of $mainfont, $textfont and $uifont with named
fonts called mainfont, textfont and uifont. We also have variants
called mainfontbold and textfontbold. This makes it much easier to
make sure font size changes are reflected everywhere they should be,
since configuring a named font automatically changes all the widgets
that are using that font.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When changing the selector for Exact/IgnCase/Regexp, we were getting
a Tcl error. This fixes it.
It also adds a workaround for a bug in alpha versions of Tk8.5 where
wordprocessor-style tabs don't seem to work properly around column 1.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes the bug where we were using the wrong font to calculate
the width of the tab stops in the diff display window.
If we're running on Tk 8.5 we also use the new -tabstyle wordprocessor
option that makes tabs work as expected, i.e. a tab moves the cursor
to the right until the next tab stop is reached. On Tk 8.5 we also
get fancy and set the first tab stop at column 1 for a normal diff
or column N for a merge diff with N parents.
On Tk8.4 we can't do that because the tabs work in the "tabular"
style, i.e. the nth tab character moves to the location of the nth
tab position, *unless* you ask for the default tab setting, which
gives 8-column tabs that work in the "wordprocessor" mode. So on
Tk8.4 if the tab setting is 8 we ask for default tabs. This means
that a tab setting of 7 or 9 can look quite different to 8 in some
cases.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This uses the space formerly occupied by the find string entry field
to make a status label (unused for now) and a canvas to display a
couple of progress bars. The bar for reading in commits is a short
green bar that oscillates back and forth as commits come in. The
bar for showing the progress of a Find operation is yellow and advances
from left to right.
This also arranges to stop a Find operation if the user selects another
commit or pops up a context menu, and fixes the "highlight this" popup
menu items in the file list window.
Signed-off-by: Paul Mackerras <paulus@samba.org>
insertrow and removerow were trying to adjust rowidlist, rowisopt
and rowfinal even if the row where we're inserting/deleting stuff
hasn't been laid out yet, which resulted in Tcl errors. This fixes
that.
Also we weren't deleting the link$linknum tag in appendwithlinks,
which resulted in SHA1 IDs in the body of a commit message sometimes
getting shown in blue with underlining when they shouldn't.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This effectively coaelesces the highlighting function and the search
function. Instead of separate highlight and find controls, there is
now one set of interface elements that controls both. The main
selector is a drop-down menu that controls whether commits are
highlighted and searched for on the basis of text in the commit
(i.e. the commit object), files affected by the commit or strings
added/removed by the commit.
The functions to highlight by membership of a view or by ancestor/
descendent relation to the selected commit are gone, as is the
move to next/previous highlighted commit (shift-up/down) function.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Commit 8f48936391 changed mkpatchgo
to use diffcmd rather than constructing the diff command itself.
Unfortunately diffcmd returns the command with a "|" as the first
element (ready for use with open), but exec won't accept the "|".
Thus we need to remove the "|".
Signed-off-by: Paul Mackerras <paulus@samba.org>
Now that we have a general-purpose way of taking some action when a
commit ID of interest is encountered, use that for triggering the
git diff-index process when we find the currently checked-out head,
rather than the special-purpose lookingforhead variable.
Also do the commitinterest processing in getcommitlines rather than
in showstuff.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We weren't updating the rowfinal list in insertrow and removerow, so
it was getting out of sync with rowidlist, which resulted in Tcl errors.
This also optimizes the setting of rowfinal in layoutrows a bit.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This arranges things so that we can do the layout all the way up to
the last commit that we have received from git log. If we get more
commits we re-lay and redisplay (if necessary) the visible rows.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds code to write out the topology information used to determine
precedes/follows and branch information into a cache file (~3.5MB for
the kernel tree). At startup we read the cache file and then do a
git rev-list to update it, which is fast because we exclude all commits
in the cache that have no children and commits reachable from them
(which amounts to everything in the cache). If one of those commits
without children no longer exists, then git rev-list will give an error,
whereupon we throw away the cache and read in the whole tree again.
This gives a significant speedup in the startup time for gitk.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When "Show nearby tags" is turned off and the user did a cherry-pick,
we were trying to access variables relating to the descendent/ancestor
tag & head computations in addnewchild though they hadn't been set.
This makes sure we don't do that. Reported by Johannes Sixt.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When "Show nearby tags" is turned off and the user did a cherry-pick,
we were trying to access variables relating to the descendent/ancestor
tag & head computations in addnewchild though they hadn't been set.
This makes sure we don't do that. Reported by Johannes Sixt.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the view we're switching to hadn't been read in, we hit an early
return in showview which meant we didn't update the ref list window.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This changes layoutrows and optimize_rows to make it possible to lay
out only a little bit more of the graph than is visible, rather than
having to lay out the whole graph from top to bottom. To lay out
some of the graph without starting at the top, we use the new make_idlist
procedure for the first row, then lay it out proceeding downwards
as before. Empty list elements in rowidlist are used to denote rows
that haven't been laid out yet.
Optimizing happens much as before except that we don't try to optimize
unless we have three consecutive rows laid out (or the top 2 rows).
We have a new list, rowisopt, to record which rows have been optimized.
If we change a row that has already been drawn, we set a flag which
causes drawcommits to throw away everything drawn on the canvas and redraw
the visible rows.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Instead, when looking for lines that should be terminated with a down
arrow, we look at the parents of the commit $downarrowlen + 1 rows
before. This gets rid of one more place where we are assuming that
all the rows are laid out in order from top to bottom.
Signed-off-by: Paul Mackerras <paulus@samba.org>
First, this fixes the problem where a SHA1 id wouldn't be displayed
as a link if it wasn't in the part of the graph that had been laid
out at the time the details pane was filled in, even if that commit
later became part of the graph. This arranges for us to turn the
SHA1 id into a link when we get to that id in laying out the graph.
Secondly, there was a problem where the cursor wouldn't always turn
to a hand when over a link, because the areas for two links could
overlap slightly. This fixes that by using a counter rather than
always reverting to a counter when we leave the region of a link
(which can happen just after we've entered a different link).
Signed-off-by: Paul Mackerras <paulus@samba.org>
This changes layoutrows to use information from rowidlist and children
to work out which parent ids are appearing for the first time or need
an up arrow, instead of using idinlist. To detect the situation where
git log doesn't give us all the commits it references, this adds an
idpending array that is updated and used by getcommitlines.
This also fixes a bug where we weren't resetting the ordertok array when
updating the list of commits; this fixes that too, and a bug where we
could try to access an undefined element of commitrow if the user did
an update before gitk had finished reading in the graph.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Instead make the rowranges procedure compute its result by looking
in the rowidlist entries for the rows around the children of the id
and the id itself. This turns out not to take too long, and not having
to maintain idrowranges and rowrangelist speeds up the layout.
This also makes optimize_rows not use rowranges, since all it really
needed was a way to work out if one id is the first child of another,
so it can just look at the children list.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds an entry to the File menu labelled "List references" which
pops up a window showing a sorted list of branches, tags, and other
references, with a little icon beside each to indicate what sort it
is. The list only shows refs that point to a commit that is included
in the graph, and if you click on a ref, the corresponding commit
is selected in the main window. The list of refs gets updated
dynamically.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If a commit contained a copy operation, the file name was not correctly
determined, and the corresponding part of the patch could not be
navigated to from the list of files.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
My fix in commit b1054ac985 was only
half-right, since it ignored the case where the descendent heads of
the head being removed correspond to two or more different commits.
This fixes it. Reported by Mark Levedahl.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The new 'datetimeformat' configuration variable in ~/.gitk can be set
to a Tcl 'clock format' format string to modify the display of dates
and times.
http://www.tcl.tk/man/tcl8.4/TclCmd/clock.htm has a list of allowed
fields.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
More lines of context sometimes help to better understand a diff.
This patch introduces a text field above the box displaying the
blobdiffs. You can type in the number of lines of context that
you wish to view. The number of lines of context is saved to
~/.gitk.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we had two heads on the same commit, and the user tried to remove
one of them, gitk was sometimes incorrectly saying that the commits
on that branch weren't on any other branch. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If "Show nearby tags" is turned off, selecting "Update" from the File
menu will cause a Tcl error. This fixes it. The problem was that
we were calling regetallcommits unconditionally, but it assumed that
getallcommits had been called previously. This also restructures
{re,}getallcommits to be a bit simpler.
Signed-off-by: Paul Mackerras <paulus@samba.org>
In fixing the "can't unset idinlist" error, I moved the setting of
idinlist into the loop that splits the parents into "new" parents
(i.e. those of which this is the first child) and "old" parents.
Unfortunately this is incorrect in the case where we hit the break
statement a few lines further down, since when we come back in,
we'll see idinlist($p) set for some parents that aren't in the list.
This fixes it by moving the loop that sets up newolds and oldolds
further down.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is to help people starting gitk from graphical file managers where
the stderr output is hidden.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If there is no commit made yet, gitk just dumps a Tcl error on stderr,
which sometimes is hard to see. Noticed when gitk was run from Xfce
file manager (thunar's custom action).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Windows, unlike X-Windows, sends mousewheel events by default to the
window that has keyboard focus and uses the MouseWheel event to do so.
The window to be scrolled must be able to take focus, but gitk's panels
are disabled so cannot take focus. For all these reasons, a different
design is needed to use the mousewheel on Windows. The approach here is
to bind the mousewheel events to the top level window and redirect them
based upon the current mouse position.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
On windows, mouse input follows the keyboard focus, so to allow selecting
text from the patch canvas we must not shift focus back to the top level.
This change has no negative impact on X, so we don't explicitly test
for Win32 on this change. This provides similar selection capability
as already available using X-Windows.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Under some circumstances, having duplicate parents in a commit could
trigger a "can't unset idinlist" Tcl error. This fixes the cause
(the logic in layoutrows could end up putting the same commit into
rowidlist twice) and also puts a catch around the unset to ignore
the error.
Thanks to Jeff King for coming up with a test script to generate a
repo that shows the problem.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This changes the optimizer to insert pads to straighten downward
pointing arrows so they point straight down. When drawing the parent
link to the first child in drawlineseg, this draws it with 3 segments
like other parent links if it is only one row high with an arrow.
These two things mean we can dispense with the workarounds for arrows
on diagonal segments. This also fixes a couple of other minor bugs.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The way gitk used to draw the lines joining a commit to the lines
representing its parents was sometimes visually ambiguous, especially
when the line to the parent had a corner that coincided with a corner
on another line.
This improves things by using a smaller slanting section on the line
joining a commit to a parent line if the parent line is vertical where
it joins on. It also optimizes the drawing a little in the case where
the parent line slants towards this commit already.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This creates an "ordering token" for each commit which establishes
a total ordering for commits and is used to order the commits from
left to right on a row. The ordering token is assigned when a commit
is first encountered or when it is first listed as a parent of some
other commit, whichever comes first. The ordering token is a string
of variable length. Parents that don't already have an ordering
token are assigned one by appending to the child's token; the first
parent gets a "0" on the end, the second "1" and so on. As an
optimization, the "0" isn't appended if the child only has one parent.
When inserting a new commit into an element of rowidlist, it is
inserted in the position which makes the ordering tokens increase
from left to right.
This also simplifies the layout code by getting rid of the rowoffsets
variable, and terminates lines with an arrow after 5 rows if the line
would be longer than about 110 rows (rather than letting them go on
and terminating them later with an arrow if the graph gets too wide).
The effect of having the total ordering, and terminating the lines
early, is that it will be possible to lay out only a part of the graph
rather than having to do the whole thing top to bottom.
Signed-off-by: Paul Mackerras <paulus@samba.org>
At the moment this just has two entries, which allow you to add the file
that you clicked on to the list of filenames to highlight, or replace
the list with the file.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes the problem reported by Brian Downing where searching for
a string that doesn't exist would give a Tcl error. The basic problem
was that we weren't reading the data for the last commit since it
wasn't terminated with a null. This effectively adds a null on the end
(if there isn't one already) to make sure we process the last commit.
This also makes the yellow background behind instances of the search
string appear more consistently, and fixes a bug where the "/" key
would just find the same commit again and again instead of advancing.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When the git log process returned an error immediately, we were
sometimes getting no main window and no error window displayed,
with the gitk process just hanging waiting for something. It appears
that the tkwait in show_error, which waits for the error window to
be destroyed, wasn't sufficient to allow the main window or the error
window to be mapped.
This adds a wait in the main startup code after the main window
has been created to wait until it is visible. This seems to fix the
problem.
Signed-off-by: Paul Mackerras <paulus@samba.org>
git-gui already uses the command key for accelerators, but gitk has
never done so. I'm actually finding it very hard to move back and
forth between the two applications as git-gui is following the Mac
OS X conventions and gitk is not.
This trick is the same one that git-gui uses to determine which
key to bind actions to.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cygwin's Tcl is configured to honor any occurence of ctrl-z as an
end-of-file marker, while some commits in the git repository and possibly
elsewhere include that character in the commit comment. This causes gitk
ignore commit history following such a comment and incorrect graphs. This
change affects only Windows as Tcl on other platforms already has
eofchar == {}. This fixes problems noted by me and by Ray Lehtiniemi, and
the fix was suggested by Shawn Pierce.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The magenta was a bit close in color to the normal blue commits. This
makes them green instead as suggested by Linus.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes gitk show up to two fake commits when there are local changes
in the repository; one to represent the state of the index and one to
represent the state of the working directory. The commit representing
the working directory is colored red as before; the commit representing
the index state is colored magenta (as being between red and blue in
some sense).
Signed-off-by: Paul Mackerras <paulus@samba.org>
When I added the "--" case to the code scanning the arguments, I missed
the fact that since the switch statement uses -regexp, the "--" case
will match any argument containing "--", e.g. "--all". This fixes it
by taking out the -regexp (since we don't actually need regular
expression matching) and adjusting the match strings.
A side effect of this is that previously any argument starting with
"-d" would be taken to indicate date mode; now the argument has to be
exactly "-d" if you want date mode.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes gitk more consistent with git rev-list and git log in its
handling of arguments that could be either a revision or a filename;
now gitk displays an error message and quits, rather than treating it
as a revision and getting an error in the underlying git log. Now
gitk always passes "--" to git log even if no filenames are being
specified.
It also makes gitk display errors in invoking git log in a window
rather than on stderr, and makes gitk stop looking for a -d flag
when it sees a "--" argument.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is based on patches from Linus Torvalds and Junio Hamano, so the
ideas here are theirs.
This makes gitk use "git log -z --pretty=raw" instead of "git rev-list"
to generate the list of commits, and also makes it grok the "<" and ">"
markers that git log (and git rev-list) output with the --left-right
flag to indicate which side of a symmetric diff a commit is reachable
from. Left-side commits are drawn with a triangle pointing leftwards
instead of a circle, and right-side commits are drawn with a triangle
pointing rightwards. The commitlisted list is used to store the
left/right information as well as the information about whether each
commit is on the boundary.
Signed-off-by: Paul Mackerras <paulus@samba.org>
In commit 66e46f37de I changed gitk to
store ids in rowrangelist and idrowranges rather than row numbers,
but I missed two places in the layouttail procedure. This resulted
in occasional errors such as the "can't read "commitrow(0,8572)":
no such element in array" error reported by Mark Levedahl. This fixes
it by using the id rather than the row number.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Unroll the prefix stack when assigning treeheights when leaving
proc treeview. Previously, when the ls-tree output ended in
multiple nested directories (for instance in a repository with a
single file "foo/bar/baz"), $treeheight("foo/bar/") was assigned
twice, and $treeheight("foo/") was never assigned. This led to
an error when expanding the "foo" directory in the gitk treeview.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This was a hangover from before the "Files" and "Pickaxe" parts of
the Find function were moved to the highlight facility in commit
60f7a7dc49. It serves no useful
purpose any more, so this removes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
I missed the case where both nodes have no children and therefore
have no incoming arcs. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This reworks the way that the "Find" button (and the /, ?, ^F, and ^G
keys) works. Previously, pressing the "Find" button would cause gitk
to go off and scan through every commit to see which commits matched,
and the user interface was completely unreponsive during that time.
Now the searching is done in chunks using the scheduler, so the UI
still responds, and the search stops as soon as a matching commit is
found.
The highlighting of matches using a yellow background is now done in
the commit-drawing code and the highlighting code. This ensures that
all the commits that are visible that match are highlighted without
the search code having to find them all.
This also fixes a bug where previously-drawn commits that need to be
highlighted were not being highlighted.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The callback function was incorrectly set to update the background
colorbar when updated the selection background. This did not affect the
colors chosen or their use, just their presentation in the preferences
dialog box.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
The tabstop must be a smallish positive integer, and a spinbox is the
accepted UI control to accomplish this limiting rather than the text
entry box previously used.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Since git reset now gets chatty while resetting, we were getting errors
reported when a reset was done using the "reset branch to here" menu
item. With this we now read the progress messages from git reset and
update a progress bar. Because git reset outputs the progress messages
to standard error, and Tcl treats messages to standard error as error
messages, we have to invoke git reset via a shell and redirect standard
error into standard output.
This also fixes a bug in computing descendent heads when head ids
are changed via a reset.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The main thing here is better parsing of the diff --git lines in the
output of git diff-tree -p. We now cope with filenames in quotes with
special chars escaped. If the filenames contain spaces they aren't
quoted, however, which can create difficulties in parsing. We get
around the difficulties by detecting the case when the filename hasn't
changed (chop the part after "diff --git " in two and see if the halves
match apart from a/ in one and b/ in the other), and if it hasn't
changed, we just use one half. If the filename has changed we wait
for the "rename from" and "rename to" lines, which give the old and
new filenames unambiguously.
This also improves the parsing of the output of git diff-tree.
Instead of using lindex to extract the filename, we take the part from
the first tab on, and if it starts with a quote, we use [lindex $str 0]
to remove the quotes and convert the escapes.
This also gets rid of some unused tagging of the diff text, uses
[string compare] instead of [regexp] in some places, and fixes the
regexp for detecting the @@ hunk-separator lines (the regexp wasn't
accepting a single number, as in "-0,0 +1" for example).
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we compute descendent heads and descendent/ancestor tags, we
cache the results. We need to be careful to invalidate the cache
when we add stuff to the graph. Also make sure that when we cache
descendent heads for a node we only cache the heads that are actually
descendents of that node.
Signed-off-by: Paul Mackerras <paulus@samba.org>
For some unknown reason, changing the scrolling region on the canvases
provokes multiple milliseconds worth of computation in the X server,
and this can end up slowing gitk down significantly. This works around
the problem by limiting the rate at which we update the scrolling region
after the first 100 rows to at most 2 per second.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds an entry to the menu that comes up when the user does a
right-click on a row. The new entry allows the user to reset the
currently checked-out head to the commit for the row that they did
the right-click on. The user has to select what type of reset to
do, and confirm the reset, via a dialog box that pops up.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The information in childlist is a duplicate of what's in the children
array, and it wasn't being accessed often enough to be really worth
keeping the list around as well.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We were doing two execs for each tag - one to map the tag ID to a
commit ID and one to read the contents of the tag for later display.
This speeds up the process by not reading the contents of the tag
(instead it is read later if needed), and by using the -d flag to
git show-ref, which gives us refs/tags/foo^{} lines which give us
the commit ID. Also this uses string operations instead of regexps.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If there are local changes in the repository, i.e., git-diff-index HEAD
produces some output, then this optionally displays an extra row in
the graph as a child of the HEAD commit (but with a red circle to
indicate that it's not a real commit). There is a checkbox in the
preferences window to control whether gitk does this or not.
Clicking on the extra row shows the diffs between the working directory
and the HEAD (using git diff-index -p). The right-click menu on the
extra row allows the user to generate a patch containing the local diffs,
or to display the diffs between the working directory and any commit.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This only draws as much of the graph lines as is visible. This can
happen by adding coordinates on to an existing graph line or by
creating a new line. This means that we only need to have laid out
and optimized as much of the graph as is actually visible in order to
draw it, including the lines (previously we didn't draw a graph
line until we had laid out and optimized to the end of a segment of
the line, i.e. down to a down-arrow or to the row where the line's
commit is displayed). This also lets us get rid of the linesegends
list, and gives us an easy workaround for the X server bug that
causes long lines to be misdrawn. This also gets rid of the use
of rowoffsets in drawlineseg et al.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This removes the need for insertrow to go through rowrangelist and
idrowranges and adjust a lot of entries. The first entry for a given
id is now the row number of the first child, not that row number + 1,
and rowranges compensates for that so its callers didn't have to
change. This adds a ranges argument to drawlineseg so that we can
avoid calling rowranges a second time inside drawlineseg (all its
callers already called rowranges).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Neither the "check out this branch" nor the "remove this branch"
menu item can be used on the currently-checked out branch, so disable
them.
Signed-off-by: Paul Mackerras <paulus@samba.org>
In some repositories imported from other systems we can get carriage
return characters in the commit message, which leads to a multi-line
headline being displayed in the summary window, which looks bad.
Also some commit messages start with one or more blank lines, which
leads to an empty headline. This fixes these problems.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This allows us to do compute-intensive processing, such as laying out
the graph, relatively efficiently while also having the GUI be
reasonably responsive. The problem previously was that file events
were serviced before X events, so reading from another process which
supplies data quickly (hi git rev-list :) could mean that X events
didn't get processed for a long time.
With this, gitk finishes laying out the graph slightly sooner and
still responds to the GUI while doing so.
Signed-off-by: Paul Mackerras <paulus@samba.org>
It used to be that if you clicked on a line while gitk was still drawing
stuff, it would immediately re-select the first line of the display.
This fixes that.
Signed-off-by: Paul Mackerras <paulus@samba.org>
With some large repositories, a commit can end up on thousands of
branches, which results in an extremely long "Branches:" line in the
details window, and that results in the window being extremely slow
to scroll.
This fixes it by just showing "many (N)" after "Branches:", "Follows:"
or "Precedes:", where N is the number of heads or tags. The limit
is currently set at 20 but could be made configurable (and the "many"
could be a link to pop up a window listing them all in case anyone
really wants to know).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Instead of working out descendent heads and descendent & ancestor
branches in a two-pass algorithm, this reads and stores a simplified
version of the graph topology, and works out descendent/ancestor
tags and descendent heads on demand (with a bit of caching).
The advantages of this are, first, that we now don't have to use
--topo-order on the git rev-list process. Secondly, we don't have
to re-read the whole graph when tags or heads change or even when
the graph changes. Since we can cope with parents coming before
children, we can update the graph by running a git rev-list with
arguments that just give us the new commits, and merge the new
commits into the simplified graph.
The graph is simplified in the sense that commits with exactly one
parent and one child (which is >90% of them in most cases) are grouped
together into arcs joining nodes or 'branch/merge points', which are
the commits that don't have exactly 1 parent and 1 child. This reduces
the size of the graph substantially and decreases the time to traverse
it correspondingly.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Not all projects use the convention that one tabstop = 8 characters, and
a common convention is to use one tabstop = one level of indent. For such
projects, using 8 characters per tabstop often shows too much whitespace
per indent. This allows the user to configure the number of characters
to use per tabstop.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When adjusting fontsize (using ctrl+/-), all panes except the lower right
were updated. This fixes that.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cygwin's tk by default uses a very dark selection background color that
makes the currently selected text almost unreadable. On linux, the default
selection background is a light gray which is very usable. This makes the
default a light gray everywhere but allows the user to configure the
color as well.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds a set of radiobuttons that select between displaying the full
diff (both - and + lines), the old file (suppressing the + lines) and the
new file (suppressing the - lines) in the diff display window.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Made the default buttons on the dialog active and focused upon the
dialog appearence.
Bound 'Escape' and 'Return' keys to the dialog dismissal where it
was appropriate: mainly for dialogs with only one button and no
editable fields.
Unified the look of the "About gitk" and "Key bindings" dialogs.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Some parts of gitk were not respecting the default GUI font. Most
of them were catched and fixed.
Signed-off-by: Eygene Ryabinkin <rea-git@codelabs.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Preferring git _space_ COMMAND over git _dash_ COMMAND allows the
user to have only git and gitk in their path. e.g. when git and gitk
are symbolic links in a personal bin directory to the real git and gitk.
Signed-off-by: Paul Mackerras <paulus@samba.org>
I chose <F5> because it's also the key to reload the current
page in web browsers such as Konqueror and Firefox, so users
are more likely to be familiar with it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitk was saving widget sizes and positions when the main window was
destroyed, which is after all child widgets are destroyed. The cure
is to trap the WM_DELETE_WINDOW event before the gui is torn down. Also,
the saved geometry was captured using "winfo geometry .", rather than
"wm geometry ." Under Linux, these two return different answers and the
latter one is correct.
[jc: credit goes to Brett Schwarz for suggesting the use of "wm protocol";
I also squashed the follow-up patch to remove extraneous -0
from expressions.]
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to be ls-remote on self was the only easy way to grab
the ref information. Now we have show-ref which does not
involve fork and IPC, so use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The gitk gui layout was completely broken on Cygwin. If gitk was started
without previous geometry in ~/.gitk, the user could drag the window sashes
to get a useable layout. However, if ~/.gitk existed, this was not possible
at all.
The fix was to rewrite makewindow, changing the toplevel containers and
the particular geometry information saved between sessions. Numerous bugs
in both the Cygwin and the Linux Tk versions make this a delicate
balancing act: the version here works in both but many subtle variants
are competely broken in one or the other environment.
Three user visible changes result:
1 - The viewer is fully functional under Cygwin.
2 - The search bar moves from the bottom to the top of the lower left
pane. This was necessary to get around a layout problem on Cygwin.
3 - The window size and position is saved and restored between sessions.
Again, this is necessary to get around a layout problem on Cygwin.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
