Profile feedback always failed for me with -jN. The problem
was that there was no implicit ordering between the profile generate
stage and the profile use stage. So some objects in the later stage
would be linked with profile generate objects, and fail due
to the missing -lgcov.
This adds a new profile target that implicitely enforces the
correct ordering by using submakes. Plus a profile-install target
to also install. This is also nicer to type that PROFILE=...
Plus I always run the performance test suite now for the full
profile run.
In addition I also added a profile-fast / profile-fast-install
target the only runs the performance test suite instead of the
whole test suite. This significantly speeds up the profile build,
which was totally dominated by test suite run time. However
it may have less coverage of course.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same way as there is for_each_ref() to iterate on refs,
for_each_mergetag() allows the caller to iterate on the mergetags of
a given commit. Use it to rewrite show_mergetag() used in "git log".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the whole directory of test files at once using git add instead of
calling git update-index on each of them and use git commit instead of
the plumbing commands write-tree, update-ref and commit-tree to build
the commit. This simplifies the code considerably.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Profile feedback sets -DNO_NORETURN, which causes the compat
header file to go into a default #else block. That #else
block defines away __attribute__(). Doing so causes all
kinds of problems with the Linux and gcc system headers:
in particular it makes the xmmintrin.h headers error out,
breaking the build.
Don't define away __attribute__ when __GNUC__ is set.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use BASIC_CFLAGS instead of CFLAGS to set up the profile feedback
option in the Makefile.
This allows still overriding CFLAGS on the make command line
without disabling profile feedback.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interning short strings with high probability of duplicates can reduce the
memory footprint and speed up comparisons.
Add strintern() and memintern() APIs that use a hashmap to manage the pool
of unique, interned strings.
Note: strintern(getenv()) could be used to sanitize git's use of getenv(),
in case we ever encounter a platform where a call to getenv() invalidates
previous getenv() results (which is allowed by POSIX).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hashmap entries are typically looked up by just a key. The hashmap_get()
API expects an initialized entry structure instead, to support compound
keys. This flexibility is currently only needed by find_dir_entry() in
name-hash.c (and compat/win32/fscache.c in the msysgit fork). All other
(currently five) call sites of hashmap_get() have to set up a near emtpy
entry structure, resulting in duplicate code like this:
struct hashmap_entry keyentry;
hashmap_entry_init(&keyentry, hash(key));
return hashmap_get(map, &keyentry, key);
Add a hashmap_get_from_hash() API that allows hashmap lookups by just
specifying the key and its hash code, i.e.:
return hashmap_get_from_hash(map, hash(key), key);
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Copying the first bytes of a SHA1 is duplicated in six places,
however, the implications (the actual value would depend on the
endianness of the platform) is documented only once.
Add a properly documented API for this.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git checkout' fails if a directory is longer than PATH_MAX, because the
lstat_cache in symlinks.c checks if the leading directory exists using
PATH_MAX-bounded string operations.
Remove the limitation by using strbuf instead.
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a ref crosses a memory page boundary, we restart the parsing
at the beginning with the bytewise code. Pass the original flags
to that code, rather than the current flags.
Reported-By: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: David Turner <dturner@twitter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git rebase --skip" did not work well when it stopped due to a
conflict twice in a row.
* bc/fix-rebase-merge-skip:
rebase--merge: fix --skip with two conflicts in a row
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
We create a directory that cannot be removed, confirm that
it cannot be removed, and then fix it like:
chmod 0 foo &&
test_must_fail git clean -d -f &&
chmod 755 foo
If the middle step fails but leaves the directory (e.g., the
bug is that clean does not notice the failure), this
pollutes the test repo with an unremovable directory. Not
only does this cause further tests to fail, but it means
that "rm -rf" fails on the whole trash directory, and the
user has to intervene manually to even re-run the test script.
We can bump the "chmod 755" recovery to a test_when_finished
block to be sure that it always runs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While checking if a new alternate object database is a duplicate make
sure that old and new base paths have the same length before comparing
them with memcmp. This avoids overrunning the buffer of the existing
entry if the new one is longer and it stops rejecting foobar/ after
foo/ was already added.
Signed-off-by: Rene Scharfe <ls.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When multiple parents of a merge commit get mapped to the same
commit, filter-branch used to pass all instances of the parent
commit to the parent and commit filters and to "git commit-tree" or
"git_commit_non_empty_tree".
This can often happen when extracting a small project from a large
repository; merges can join history with no commits on any branch
which affect the paths being retained. Once the intermediate
commits have been filtered out, all the immediate parents of the
merge commit can end up being mapped to the same commit - either the
original merge-base or an ancestor of it.
"git commit-tree" would display an error but write the commit with
the normalized parents in any case. "git_commit_non_empty_tree"
would fail to notice that the commit being made was in fact a
non-merge commit and would retain it even if a further pass with
"--prune-empty" would discard the commit as empty.
Ensure that duplicate parents are pruned before the parent filter to
make "--prune-empty" idempotent, removing all empty non-merge
commits in a singe pass.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If 'current-file' does not contain LF at EOF, and change between
'base-file' and 'other-file' does not change any line close to EOF, the
3-way merge should not add LF to EOF. This is what 'diff3 -m' does, and
seems to be a reasonable expectation.
The change which introduced the behavior is cd1d61c44f. It always calls
function xdl_recs_copy() for sides with add_nl == 1. In fact, it looks
like the only case when this is needed is when 2 files are being
union-merged, and they do not have LF at EOF (strictly speaking, the
first of them).
Add tests:
* "merge without conflict (missing LF at EOF, away from change in the
other file)" and "merge does not add LF away of change", to demonstrate
the changed behavior.
* "conflict at EOF without LF resolved by --union", to verify that the
union-merge at the end inerts newline between versions.
* some more tests which I felt like not covering the functionality well
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tests "merge without conflict (missing LF at EOF" and "merge result
added missing LF" are meaningless - the first one is identical to
"merge without conflict" and the second compares results of those
identical tests, which are always same.
This has been so since their addition in ba1f5f3537. Probably "new4.txt"
was meant to be used instead of "new2.txt". Unfortunately, the current
merge-file breaks with new4 - conflict is reported. They also fail at
that revision if fixed.
Fix the file reference to "new4.txt" and mark the tests as failing -
they look like legitimate expectations, just not satisfied at time
being.
Signed-off-by: Max Kirillov <max@max630.net>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are reloading the list of packs, we check whether a
particular pack has been loaded. This is slightly tricky,
because we load packs based on the presence of their ".idx"
files, but record the name of the matching ".pack" file.
Therefore we want to compare their bases.
The existing code stripped off ".idx" from a file we found,
then compared that whole base length to strings containing
the ".pack" version. This meant we could end up comparing
bytes past what the ".pack" string contained, if the ".idx"
file name was much longer.
In practice, it worked OK because memcmp would end up seeing
a difference in the two strings and would return early
before hitting the full length. However, memcmp may
sometimes read extra bytes past a difference (e.g., because
it is comparing 64-bit words), or is even free to compare in
reverse order.
Furthermore, our memcmp made no guarantees that we matched
the whole pack name, up to ".pack". So "foo.idx" would match
"foo-bar.pack", which is wrong (but does not typically
happen, because our pack names have a fixed size).
We can fix both issues, avoid magic numbers, and document
that we expect to compare against a string with ".pack" by
using strip_suffix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In this code, we try to convert both "foo.idx" and "foo"
into "foo.pack". By stripping the suffix, we can avoid a
confusing use of strbuf_splice, and make it clear that both
cases are adding ".pack" to the end.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can almost get away with just calling "strip_suffix_mem"
on a strbuf's buf and len fields. But we also need to move
the NUL-terminator to satisfy strbuf's invariants. Let's
provide a convenience wrapper that handles this.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We also switch to using strbufs, which lets us avoid the
potentially dangerous combination of a manual malloc
followed by a strcpy.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stripping a suffix like:
if (ends_with(str, "foo"))
buf = xmemdupz(str, strlen(str) - 3);
we can instead use strip_suffix to avoid the constant 3,
which must match the literal "foo" (we sometimes use
strlen("foo") instead, but that means we are repeating
ourselves). The example above becomes:
if (strip_suffix(str, "foo", &len))
buf = xmemdupz(str, len);
This also saves a strlen(), since we calculate the string
length when detecting the suffix.
Note that in some cases we also switch from xstrndup to
xmemdupz, which saves a further strlen call.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two are almost the same function, with the exception
that has_extension only matches if there is content before
the suffix. So ends_with(".exe", ".exe") is true, but
has_extension would not be.
This distinction does not matter to any of the callers,
though, and we can just replace uses of has_extension with
ends_with. We prefer the "ends_with" name because it is more
generic, and there is nothing about the function that
requires it to be used for file extensions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ends_with function is essentially a simplified version
of strip_suffix, in which we throw away the stripped length.
Implementing it as an inline on top of strip_suffix has two
advantages:
1. We save a bit of duplicated code.
2. The suffix is typically a string literal, and we call
strlen on it. By making the function inline, many
compilers can replace the strlen call with a constant.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many callers of ends_with want to not only find out whether
a string has a suffix, but want to also strip it off. Doing
that separately has two minor problems:
1. We often run over the string twice (once to find
the suffix, and then once more to find its length to
subtract the suffix length).
2. We have to specify the suffix length again, which means
either a magic number, or repeating ourselves with
strlen("suffix").
Just as we have skip_prefix to avoid these cases with
starts_with, we can add a strip_suffix to avoid them with
ends_with.
Note that we add two forms of strip_suffix here: one that
takes a string, with the resulting length as an
out-parameter; and one that takes a pointer/length pair, and
reuses the length as an out-parameter. The latter is more
efficient when the caller already has the length (e.g., when
using strbufs), but it can be easy to confuse the two, as
they take the same number and types of parameters.
For that reason, the "mem" form puts its length parameter
next to the buffer (since they are a pair), and the string
form puts it at the end (since it is an out-parameter). The
compiler can notice when you get the order wrong, which
should help prevent writing one when you meant the other.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using strbuf to create a message string in case a path is
too long for our fixed-size buffer, replace that buffer with a strbuf
and thus get rid of the limitation.
Helped-by: Duy Nguyen <pclouds@gmail.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the ARRAY_SIZE macro to get the number
of elements in an array.
Signed-off-by: Elia Pinto <gitter.spiros@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use argv_array_pushf for building the number string for the option
--summary-limit directly instead of using an intermediate buffer.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using a PATH_MAX buffer, use argv_array for constructing the
environment for git submodule summary. This simplifies the code a bit
and removes the arbitrary length limit.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When many branches contain a commit, the branches used to be shown in
the form "A, B and many more", where A, B can be master of current
HEAD. But there are more which might be interesting to always know about.
For example, "origin/master".
The new option, visiblerefs, is stored in ~/.gitk. It contains a list
of references which are always shown before "and many more" if they
contain the commit. By default it is `{"master"}', which is compatible
with previous behavior.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
105b5d3f ("gitk: Use mktemp -d to avoid predictable temporary
directories") introduced a dependency on mkdtemp, which is not
available on Windows.
Use the original temporary directory behavior when mkdtemp fails.
This makes the code use mkdtemp when available and gracefully
fallback to the existing behavior when it is not available.
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
* master~2:
gitk: Show staged submodules regardless of ignore config
gitk: Allow displaying time zones from author and commit dates timestamps
gitk: Switch to patch mode when searching for line origin
gitk: Replace SHA1 entry field on keyboard paste
l10n: Init Vietnamese translation
* git://repo.or.cz/git-gui:
git-gui: tolerate major version changes when comparing the git version
git-gui: show staged submodules regardless of ignore config
One of the purposes of "git replace --edit" is to help a
user repair objects which are malformed or corrupted.
Usually we pretty-print trees with "ls-tree", which is much
easier to work with than the raw binary data. However, some
forms of corruption break the tree-walker, in which case our
pretty-printing fails, rendering "--edit" useless for the
user.
This patch introduces a "--raw" option, which lets you edit
the binary data in these instances.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a little more verbose, but will make it easier to
make parts of our command-line conditional (without
resorting to magic numbers or lots of NULLs to get an
appropriately sized argv array).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a file descriptor is given to run_command via the
"in", "out", or "err" parameters, run_command takes
ownership. The descriptor will be closed in the parent
process whether the process is spawned successfully or not,
and closing it again is wrong.
In practice this has not caused problems, because we usually
close() right after start_command returns, meaning no other
code has opened a descriptor in the meantime. So we just get
EBADF and ignore it (rather than accidentally closing
somebody else's descriptor!).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The final test in t7510 checks that "--format" placeholders
that look similar to GPG placeholders (but that we don't
actually understand) are passed through. That test was
placed in t7510, since the other GPG placeholder tests are
there. However, it does not have a GPG prerequisite, because
it is not actually checking any signed commits.
This causes the test to erroneously fail when gpg is not
installed on a system, however. Not because we need signed
commits, but because we need _any_ commit to run "git log".
If we don't have gpg installed, t7510 doesn't create any
commits at all.
We can fix this by moving the test into t6006. This is
arguably a better place anyway, because it is where we test
most of the other placeholders (we do not test GPG
placeholders there because of the infrastructure needed to
make signed commits).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
