On Windows, there are "UNC paths" to access network (AKA shared)
folders, of the form \\server\sharename\directory. This provides a
convenient way for Windows developers to share their Git repositories
without having to have a dedicated server.
Git for Windows v2.11.0 introduced a regression where pushing to said
UNC paths no longer works, although fetching and cloning still does, as
reported here: https://github.com/git-for-windows/git/issues/979
This regression was fixed in 7814fbe3f1 (normalize_path_copy(): fix
pushing to //server/share/dir on Windows, 2016-12-14).
Let's make sure that it does not regress again, by introducing a test
that uses so-called "administrative shares": disk volumes are
automatically shared under certain circumstances, e.g. the C: drive is
shared as \\localhost\c$. The test needs to be skipped if the current
directory is inaccessible via said administrative share, of course.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git index-pack --stdin" needs an access to an existing repository,
but "git index-pack file.pack" to generate an .idx file that
corresponds to a packfile does not.
* jk/index-pack-wo-repo-from-stdin:
index-pack: skip collision check when not in repository
t: use nongit() function where applicable
index-pack: complain when --stdin is used outside of a repo
t5000: extract nongit function to test-lib-functions.sh
A recent update to receive-pack to make it easier to drop garbage
objects made it clear that GIT_ALTERNATE_OBJECT_DIRECTORIES cannot
have a pathname with a colon in it (no surprise!), and this in turn
made it impossible to push into a repository at such a path. This
has been fixed by introducing a quoting mechanism used when
appending such a path to the colon-separated list.
* jk/quote-env-path-list-component:
t5615-alternate-env: double-quotes in file names do not work on Windows
t5547-push-quarantine: run the path separator test on Windows, too
tmp-objdir: quote paths we add to alternates
alternates: accept double-quoted paths
"git clone --reference $there --recurse-submodules $super" has been
taught to guess repositories usable as references for submodules of
$super that are embedded in $there while making a clone of the
superproject borrow objects from $there; extend the mechanism to
also allow submodules of these submodules to borrow repositories
embedded in these clones of the submodules embedded in the clone of
the superproject.
* vs/submodule-clone-nested-submodules-alternates:
submodule--helper: set alternateLocation for cloned submodules
Unlike "git am --abort", "git cherry-pick --abort" moved HEAD back
to where cherry-pick started while picking multiple changes, when
the cherry-pick stopped to ask for help from the user, and the user
did "git reset --hard" to a different commit in order to re-attempt
the operation.
* sb/sequencer-abort-safety:
Revert "sequencer: remove useless get_dir() function"
sequencer: remove useless get_dir() function
sequencer: make sequencer abort safer
t3510: test that cherry-pick --abort does not unsafely change HEAD
am: change safe_to_abort()'s not rewinding error into a warning
am: fix filename in safe_to_abort() error message
"git pull --rebase", when there is no new commits on our side since
we forked from the upstream, should be able to fast-forward without
invoking "git rebase", but it didn't.
* jc/pull-rebase-ff:
pull: fast-forward "pull --rebase=true"
"git p4" didn't interact with the internal of .git directory
correctly in the modern "git-worktree"-enabled world.
* ld/p4-worktree:
git-p4: support git worktrees
Git 2.11 had a minor regression in "merge --ff-only" that competed
with another process that simultanously attempted to update the
index. We used to explain what went wrong with an error message,
but the new code silently failed. The error message has been
resurrected.
* jc/lock-report-on-error:
lockfile: LOCK_REPORT_ON_ERROR
hold_locked_index(): align error handling with hold_lockfile_for_update()
wt-status: implement opportunisitc index update correctly
"git rebase" learned "--quit" option, which allows a user to
remove the metadata left by an earlier "git rebase" that was
manually aborted without using "git rebase --abort".
* nd/rebase-forget:
rebase: add --quit to cleanup rebase, leave everything else untouched
In addition to %(subject), %(body), "log --pretty=format:..."
learned a new placeholder %(trailers).
* jk/trailers-placeholder-in-pretty:
ref-filter: add support to display trailers as part of contents
pretty: add %(trailers) format for displaying trailers of a commit message
"git commit --allow-empty --only" (no pathspec) with dirty index
ought to be an acceptable way to create a new commit that does not
change any paths, but it was forbidden, perhaps because nobody
needed it so far.
* ak/commit-only-allow-empty:
commit: remove 'Clever' message for --only --amend
commit: make --only --allow-empty work without paths
"git difftool --dir-diff" had a minor regression when started from
a subdirectory, which has been fixed.
* da/difftool-dir-diff-fix:
difftool: fix dir-diff index creation when in a subdirectory
When diff.renames configuration is on (and with Git 2.9 and later,
it is enabled by default, which made it worse), "git stash"
misbehaved if a file is removed and another file with a very
similar content is added.
* jk/stash-disable-renames-internally:
stash: prefer plumbing over git-diff
Transport with dumb http can be fooled into following foreign URLs
that the end user does not intend to, especially with the server
side redirects and http-alternates mechanism, which can lead to
security issues. Tighten the redirection and make it more obvious
to the end user when it happens.
* jk/http-walker-limit-redirect-2.9:
http: treat http-alternates like redirects
http: make redirects more obvious
remote-curl: rename shadowed options variable
http: always update the base URL for redirects
http: simplify update_url_from_redirect
"git branch --list" and friends learned "--ignore-case" option to
optionally sort branches and tags case insensitively.
* nd/for-each-ref-ignore-case:
tag, branch, for-each-ref: add --ignore-case for sorting and filtering
Fix a corner case in merge-recursive regression that crept in
during 2.10 development cycle.
* jc/renormalize-merge-kill-safer-crlf:
convert: git cherry-pick -Xrenormalize did not work
merge-recursive: handle NULL in add_cacheinfo() correctly
cherry-pick: demonstrate a segmentation fault
Commands that operate on a log message and add lines to the trailer
blocks, such as "format-patch -s", "cherry-pick (-x|-s)", and
"commit -s", have been taught to use the logic of and share the
code with "git interpret-trailer".
* jt/use-trailer-api-in-commands:
sequencer: use trailer's trailer layout
trailer: have function to describe trailer layout
trailer: avoid unnecessary splitting on lines
commit: make ignore_non_trailer take buf/len
trailer: be stricter in parsing separators
"git p4" LFS support was broken when LFS stores an empty blob.
* ls/p4-empty-file-on-lfs:
git-p4: fix empty file processing for large file system backend GitLFS
The output from "git worktree list" was made in readdir() order,
and was unstable.
* nd/worktree-list-fixup:
worktree list: keep the list sorted
worktree.c: get_worktrees() takes a new flag argument
get_worktrees() must return main worktree as first item even on error
worktree: reorder an if statement
worktree.c: zero new 'struct worktree' on allocation
"git push --dry-run --recurse-submodule=on-demand" wasn't
"--dry-run" in the submodules.
* bw/push-dry-run:
push: fix --dry-run to not push submodules
push: --dry-run updates submodules when --recurse-submodules=on-demand
An empty directory in a working tree that can simply be nuked used
to interfere while merging or cherry-picking a change to create a
submodule directory there, which has been fixed..
* dt/empty-submodule-in-merge:
submodules: allow empty working-tree dirs in merge/cherry-pick
"git rev-parse --symbolic" failed with a more recent notation like
"HEAD^-1" and "HEAD^!".
* jk/rev-parse-symbolic-parents-fix:
rev-parse: fix parent shorthands with --symbolic
Many tests want to run a command outside of any git repo;
with the nongit() function this is now a one-liner. It saves
a few lines, but more importantly, it's immediately obvious
what the code is trying to accomplish.
This doesn't convert every such case in the test suite; it
just covers those that want to do a one-off command. Other
cases, such as the ones in t4035, are part of a larger
scheme of outside-repo files, and it's less confusing for
them to stay consistent with the surrounding tests.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The index-pack builtin is marked as RUN_SETUP_GENTLY,
because it's perfectly fine to index a pack in the
filesystem outside of any repository. However, --stdin mode
will write the result to the object database, which does not
make sense outside of a repository. Doing so creates a bogus
".git" directory with nothing in it except the newly-created
pack and its index.
Instead, let's flag this as an error and abort.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function abstracts the idea of running a command
outside of any repository (which is slightly awkward to do
because even if you make a non-repo directory, git may keep
walking up outside of the trash directory). There are
several scripts that use the same technique, so let's make
the function available for everyone.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-p4 would attempt to find the git directory using
its own specific code, which did not know about git
worktrees.
Rework it to use "git rev-parse --git-dir" instead.
Add test cases for worktree usage and specifying
git directory via --git-dir and $GIT_DIR.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To perform the test case on Windows in a way that corresponds to the
POSIX version, inject the semicolon in a directory name.
Typically, an absolute POSIX style path, such as the one in $PWD, is
translated into a Windows style path by bash when it invokes git.exe.
However, the presence of the semicolon suppresses this translation;
but the untranslated POSIX style path is useless for git.exe.
Therefore, instead of $PWD pass the Windows style path that $(pwd)
produces.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the space between redirection and file name.
Also remove unnecessary invocations of subshells, such as
(cd submod &&
echo X >untracked
) &&
as there is no point of having the shell for functional purposes.
In case of a single Git command use the `-C` option to let Git cd into
the directory.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03) regressed pushes to
repositories with colon (or semi-colon in Windows in them)
because it adds the repository's main object directory to
GIT_ALTERNATE_OBJECT_DIRECTORIES. The receiver interprets
the colon as a delimiter, not as part of the path, and
index-pack is unable to find objects which it needs to
resolve deltas.
The previous commit introduced a quoting mechanism for the
alternates list; let's use it here to cover this case. We'll
avoid quoting when we can, though. This alternate setup is
also used when calling hooks, so it's possible that the user
may call older git implementations which don't understand
the quoting mechanism. By quoting only when necessary, this
setup will continue to work unless the user _also_ has a
repository whose path contains the delimiter.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We read lists of alternates from objects/info/alternates
files (delimited by newline), as well as from the
GIT_ALTERNATE_OBJECT_DIRECTORIES environment variable
(delimited by colon or semi-colon, depending on the
platform).
There's no mechanism for quoting the delimiters, so it's
impossible to specify an alternate path that contains a
colon in the environment, or one that contains a newline in
a file. We've lived with that restriction for ages because
both alternates and filenames with colons are relatively
rare, and it's only a problem when the two meet. But since
722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03), which builds on the
alternates system, every push causes the receiver to set
GIT_ALTERNATE_OBJECT_DIRECTORIES internally.
It would be convenient to have some way to quote the
delimiter so that we can represent arbitrary paths.
The simplest thing would be an escape character before a
quoted delimiter (e.g., "\:" as a literal colon). But that
creates a backwards compatibility problem: any path which
uses that escape character is now broken, and we've just
shifted the problem. We could choose an unlikely escape
character (e.g., something from the non-printable ASCII
range), but that's awkward to use.
Instead, let's treat names as unquoted unless they begin
with a double-quote, in which case they are interpreted via
our usual C-stylke quoting rules. This also breaks
backwards-compatibility, but in a smaller way: it only
matters if your file has a double-quote as the very _first_
character in the path (whereas an escape character is a
problem anywhere in the path). It's also consistent with
many other parts of git, which accept either a bare pathname
or a double-quoted one, and the sender can choose to quote
or not as required.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 31224cbdc7 (clone: recursive and reference option triggers
submodule alternates, 2016-08-17) a mechanism was added to
have submodules referenced. It did not address _nested_
submodules, however.
This patch makes all not just the root repository, but also
all submodules (recursively) have submodule.alternateLocation
and submodule.alternateErrorStrategy configured, making Git
search for possible alternates for nested submodules as well.
As submodule's alternate target does not end in .git/objects
(rather .git/modules/qqqqqq/objects), this alternate target
path restriction for in add_possible_reference_from_superproject
relates from "*.git/objects" to just */objects".
New tests have been added to t7408-submodule-reference.
Signed-off-by: Vitaly _Vi Shukela <vi0oss@gmail.com>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add %(trailers) and %(contents:trailers) to display the trailers as
interpreted by trailer_info_get. Update documentation and add a test for
the new feature.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent patches have expanded on the trailers.c code and we have the
builtin commant git-interpret-trailers which can be used to add or
modify trailer lines. However, there is no easy way to simply display
the trailers of a commit message.
Add support for %(trailers) format modifier which will use the
trailer_info_get() calls to read trailers in an identical way as git
interpret-trailers does. Use a long format option instead of a short
name so that future work can more easily unify ref-filter and pretty
formats.
Add documentation and tests for the same.
Signed-off-by: Jacob Keller <jacob.keller@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are occasions when you decide to abort an in-progress rebase and
move on to do something else but you forget to do "git rebase --abort"
first. Or the rebase has been in progress for so long you forgot about
it. By the time you realize that (e.g. by starting another rebase)
it's already too late to retrace your steps. The solution is normally
rm -r .git/<some rebase dir>
and continue with your life. But there could be two different
directories for <some rebase dir> (and it obviously requires some
knowledge of how rebase works), and the ".git" part could be much
longer if you are not at top-dir, or in a linked worktree. And
"rm -r" is very dangerous to do in .git, a mistake in there could
destroy object database or other important data.
Provide "git rebase --quit" for this use case, mimicking a precedent
that is "git cherry-pick --quit".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In contrast to "git am --abort", a sequencer abort did not check
whether the current HEAD is the one that is expected. This can lead
to loss of work (when not spotted and resolved using reflog before
the garbage collector chimes in).
This behavior is now changed by mimicking "git am --abort". The
abortion is done but HEAD is not changed when the current HEAD is
not the expected HEAD.
A new file "sequencer/abort-safety" is added to save the expected
HEAD.
The new behavior is only active when --abort is invoked on multiple
picks. The problem does not occur for the single-pick case because
it is handled differently.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different places where the --no-abbrev option is parsed,
and two different places where SHA-1s are abbreviated. We normally parse
--no-abbrev with setup_revisions(), but in the no-index case, "git diff"
calls diff_opt_parse() directly, and diff_opt_parse() didn't handle
--no-abbrev until now. (It did handle --abbrev, however.) We normally
abbreviate SHA-1s with find_unique_abbrev(), but commit 4f03666 ("diff:
handle sha1 abbreviations outside of repository, 2016-10-20) recently
introduced a special case when you run "git diff" outside of a
repository.
setup_revisions() does also call diff_opt_parse(), but not for --abbrev
or --no-abbrev, which it handles itself. setup_revisions() sets
rev_info->abbrev, and later copies that to diff_options->abbrev. It
handles --no-abbrev by setting abbrev to zero. (This change doesn't
touch that.)
Setting abbrev to zero was broken in the outside-of-a-repository special
case, which until now resulted in a truly zero-length SHA-1, rather than
taking zero to mean do not abbreviate. The only way to trigger this bug,
however, was by running "git diff --raw" without either the --abbrev or
--no-abbrev options, because 1) without --raw it doesn't respect abbrev
(which is bizarre, but has been that way forever), 2) we silently clamp
--abbrev=0 to MINIMUM_ABBREV, and 3) --no-abbrev wasn't handled until
now.
The outside-of-a-repository case is one of three no-index cases. The
other two are when one of the files you're comparing is outside of the
repository you're in, and the --no-index option.
Signed-off-by: Jack Bates <jack@nottheoilrig.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9ec26e7977 (difftool: fix argument handling in subdirs, 2016-07-18)
corrected how path arguments are handled in a subdirectory, but
it introduced a regression in how entries outside of the
subdirectory are handled by dir-diff.
When preparing the right-side of the diff we only include the
changed paths in the temporary area.
The left side of the diff is constructed from a temporary
index that is built from the same set of changed files, but it
was being constructed from within the subdirectory. This is a
problem because the indexed paths are toplevel-relative, and
thus they were not getting added to the index.
Teach difftool to chdir to the toplevel of the repository before
preparing its temporary indexes. This ensures that all of the
toplevel-relative paths are valid.
Add test cases to more thoroughly exercise this scenario.
Reported-by: Frank Becker <fb@mooflu.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers of the hold_locked_index() function pass 0 when they want to
prepare to write a new version of the index file without wishing to
die or emit an error message when the request fails (e.g. somebody
else already held the lock), and pass 1 when they want the call to
die upon failure.
This option is called LOCK_DIE_ON_ERROR by the underlying lockfile
API, and the hold_locked_index() function translates the paramter to
LOCK_DIE_ON_ERROR when calling the hold_lock_file_for_update().
Replace these hardcoded '1' with LOCK_DIE_ON_ERROR and stop
translating. Callers other than the ones that are replaced with
this change pass '0' to the function; no behaviour change is
intended with this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
---
Among the callers of hold_locked_index() that passes 0:
- diff.c::refresh_index_quietly() at the end of "git diff" is an
opportunistic update; it leaks the lockfile structure but it is
just before the program exits and nobody should care.
- builtin/describe.c::cmd_describe(),
builtin/commit.c::cmd_status(),
sequencer.c::read_and_refresh_cache() are all opportunistic
updates and they are OK.
- builtin/update-index.c::cmd_update_index() takes a lock upfront
but we may end up not needing to update the index (i.e. the
entries may be fully up-to-date), in which case we do not need to
issue an error upon failure to acquire the lock. We do diagnose
and die if we indeed need to update, so it is OK.
- wt-status.c::require_clean_work_tree() IS BUGGY. It asks
silence, does not check the returned value. Compare with
callsites like cmd_describe() and cmd_status() to notice that it
is wrong to call update_index_if_able() unconditionally.
When creating a stash, we need to look at the diff between
the working tree and HEAD, and do so using the git-diff
porcelain. Because git-diff enables porcelain config like
renames by default, this causes at least one problem. The
--name-only format will not mention the source side of a
rename, meaning we will fail to stash a deletion that is
part of a rename.
We could fix that case by passing --no-renames, but this is
a symptom of a larger problem. We should be using the
diff-index plumbing here, which does not have renames
enabled by default, and also does not respect any
potentially confusing config options.
Reported-by: Matthew Patey <matthew.patey2167@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit made HTTP redirects more obvious and
tightened up the default behavior. However, there's another
way for a server to ask a git client to fetch arbitrary
content: by having an http-alternates file (or a regular
alternates file, which is used as a backup).
Similar to the HTTP redirect case, a malicious server can
claim to have refs pointing at object X, return a 404 when
the client asks for X, but point to some other URL via
http-alternates, which the client will transparently fetch.
The end result is that it looks from the user's perspective
like the objects came from the malicious server, as the
other URL is not mentioned at all.
Worse, because we feed the new URL to curl ourselves, the
usual protocol restrictions do not kick in (neither curl's
default of disallowing file://, nor the protocol
whitelisting in f4113cac0 (http: limit redirection to
protocol-whitelist, 2015-09-22).
Let's apply the same rules here as we do for HTTP redirects.
Namely:
- unless http.followRedirects is set to "always", we will
not follow remote redirects from http-alternates (or
alternates) at all
- set CURLOPT_PROTOCOLS alongside CURLOPT_REDIR_PROTOCOLS
restrict ourselves to a known-safe set and respect any
user-provided whitelist.
- mention alternate object stores on stderr so that the
user is aware another source of objects may be involved
The first item may prove to be too restrictive. The most
common use of alternates is to point to another path on the
same server. While it's possible for a single-server
redirect to be an attack, it takes a fairly obscure setup
(victim and evil repository on the same host, host speaks
dumb http, and evil repository has access to edit its own
http-alternates file).
So we could make the checks more specific, and only cover
cross-server redirects. But that means parsing the URLs
ourselves, rather than letting curl handle them. This patch
goes for the simpler approach. Given that they are only used
with dumb http, http-alternates are probably pretty rare.
And there's an escape hatch: the user can allow redirects on
a specific server by setting http.<url>.followRedirects to
"always".
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
