Subtle bugs remained on both Cygwin and Linux that caused the various
window panes to be restored in positions different than where the user
last placed them. Sergey Vlasov posed a pair of suggested fixes to this,
what is done here is slightly different. The basic fix here involves
a) explicitly remembering and restoring the sash positions for the upper
window, and b) using paneconfigure to redundantly set height and width of
other elements. This redundancy is needed as Cygwin Tcl has a nasty habit
of setting pane sizes to zero if their slaves are not configured with a
specific size, but Linux Tcl does not honor the specific size given.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
gitk was saving widget sizes and positions when the main window was
destroyed, which is after all child widgets are destroyed. The cure
is to trap the WM_DELETE_WINDOW event before the gui is torn down. Also,
the saved geometry was captured using "winfo geometry .", rather than
"wm geometry ." Under Linux, these two return different answers and the
latter one is correct.
[jc: credit goes to Brett Schwarz for suggesting the use of "wm protocol";
I also squashed the follow-up patch to remove extraneous -0
from expressions.]
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to be ls-remote on self was the only easy way to grab
the ref information. Now we have show-ref which does not
involve fork and IPC, so use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The gitk gui layout was completely broken on Cygwin. If gitk was started
without previous geometry in ~/.gitk, the user could drag the window sashes
to get a useable layout. However, if ~/.gitk existed, this was not possible
at all.
The fix was to rewrite makewindow, changing the toplevel containers and
the particular geometry information saved between sessions. Numerous bugs
in both the Cygwin and the Linux Tk versions make this a delicate
balancing act: the version here works in both but many subtle variants
are competely broken in one or the other environment.
Three user visible changes result:
1 - The viewer is fully functional under Cygwin.
2 - The search bar moves from the bottom to the top of the lower left
pane. This was necessary to get around a layout problem on Cygwin.
3 - The window size and position is saved and restored between sessions.
Again, this is necessary to get around a layout problem on Cygwin.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Make gitk use git-rev-parse --git-dir to find the repository.
Signed-off-by: Peter Baumann <siprbaum@stud.informatik.uni-erlangen.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This can help people keep track of which gitk is which, when they
have several on the screen.
Signed-off-by: Doug Maxey <dwm@enoyolf.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
It seems that under Mac OS X, the menus get some extra entries (or
possibly fewer entries), leading to references to entries by an
absolute number being off. This leads to an error when invoking
gitk --all under Mac OS X, because the "Edit view" and "Delete view"
entries aren't were gitk expects them, and so enabling them gives an
error.
This changes the code so it refers to menu entries by their content,
which should solve the problem.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The current nextfile() jumps to last hunk, but I think this is not
intention, probably, it's forgetting to add "break;". And this
patch also adds prevfile(), it jumps to previous hunk.
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When inserting the new commit row for the cherry-picked commit, we weren't
advancing the selected line (if there is one), and we weren't updating
commitlisted properly.
This restructures layoutmore so that it can take a time limit and do
limited amounts of graph layout and graph optimization, and return 1
if it exceeded the time limit before finishing everything it could do.
Also getcommitlines reads at most half a megabyte each time, to limit
the time it spends parsing the commits to about a tenth of a second.
Also got rid of the unused ncmupdate variable while I was at it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This does a git-cherry-pick -r to cherry-pick the commit that was
right-clicked on to the head of the current branch. This would work
better with some minor changes to the git-cherry-pick script.
Along the way, this changes desc_heads to record the names of the
descendent heads rather than their IDs.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes a silly typo (an extra a) and fixes the condition for
asking for confirmation of removing a branch.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This menu allows you to check out a branch and to delete a branch.
If you ask to delete a branch that has commits that aren't on any
other branch, gitk will prompt for confirmation before doing the
deletion.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We weren't updating the desc_heads, desc_tags and anc_tags arrays when
rereading the set of heads/tags/etc. The tricky thing to get right
here is restarting the computation correctly when we are only half-way
through it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes the colors for the diff old/new lines and hunk headers
configurable, as well as the background and foreground (text color)
of the various panes. There is now a GUI in the edit->preferences
window to set them.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The listrefs procedure was inadvertently removed during the course of
development, but there is still a user of it, so resurrect it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is a small extension to the code that reads the complete commit
graph, to make it compute descendent heads as well as descendent tags.
We don't exclude descendent heads that are descendents of other
descendent heads as we do for tags, since it is useful to know all the
branches that a commit is on.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds a feature to the diff display window where it will show
the tags that this commit follows (is a descendent of) and precedes
(is an ancestor of). Specifically, it will show the tags for all
tagged descendents that are not a descendent of another tagged
descendent of this commit, and the tags for all tagged ancestors
that are not ancestors of another tagged ancestor of this commit.
To do this, gitk reads the complete commit graph using git rev-list
and performs a couple of traversals of the tree. This is done in
the background, but since it can be time-consuming, there is an option
to turn it off in the `edit preferences' window.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is invoked by shift-down/shift-up. It relies on a patch to
git-diff-tree that has recently gone into the git repository, commit
ID e0c97ca6 (without this it may just sit there doing waiting for
git-diff-tree when looking for the next/previous highlight).
Signed-off-by: Paul Mackerras <paulus@samba.org>
This provides a way to highlight commits that are, or are not,
descendents or ancestors of the currently selected commit. It's
still rough around the edges but seems to be useful even so.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Bug noted by Junio C Hamano: show_error can be passed "." (root
window) as its $w argument, but appending ".m" and ".ok" results in
creating "..m" and "..ok" as window paths, which were invalid.
This fixes it in a slightly different way from Junio's patch, though.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The code to extract a message part from the error message was
not passing the error message to [string range], and resulted
in the show_error not getting called.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This removes the "Files" and "Pickaxe" parts of the "Find" function,
so Find is now just about searching the commit data. We now highlight
the commits that match the Find string (without having to press Find),
and have a drop-down menu for selecting whether the git-diff-tree based
highlighting is done on paths or on adding/removing a given string.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes it work a bit more smoothly, and adds a reverse-search
function, for which I stole the ^R binding from the find function.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This does incremental highlighting of matches to the search string
but doesn't do true incremental search a la emacs.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This applies a bold highlight to entries in the file list pane in the
bottom right corner when it is displaying the list of changed files.
This doesn't yet highlight file list entries when it is in tree view
mode.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Some people put very long strings into commit messages, which then
become invisible in gitk (word wrapping in the commit details window is
turned off, and there is no horizontal scroll bar). Enabling word wrap
for just the commit message looks much better.
Wrapping is controlled by the "wrapcomment" option in ~/.gitk. By
default this option is set to "none", which disables wrapping; setting
it to "word" enables word wrap for commit messages.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the user pressed page up or page down and the new page wasn't
already drawn, we failed to select the line we wanted in the new
page. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Now there is a bar across the middle (just below the bar containing
the sha1 ID, find string etc.) which controls highlighting. There are
three ways to highlight: the user can highlight commits affecting
a list of paths, commits in a view, or commits where the author or
committer matches any of a list of strings (case-insensitive). The
elements of the list of paths and list of names are delimited by
whitespace with shell quoting rules.
Signed-off-by: Paul Mackerras <paulus@samba.org>
In the commit details window, we were displaying "(...)" for the
headlines of parents and children that haven't been drawn, without
making any attempt to get those headlines. This adds a call to
getcommit to commit_descriptor so we get those headlines.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The list of arguments to git-rev-list, including arguments that
select the range of commits, is now a part of the view specification.
If any arguments are given to gitk, they become part of the
"Command line" view, and the non-file arguments become the default
for any new views created.
Getting an error from git-rev-list is no longer fatal; instead the
error window pops up, and when you press OK, the main window just
shows "No commits selected".
The git-rev-list arguments are entered in an entry widget in the
view editor window using shell quoting conventions, not Tcl quoting
conventions.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The conversion of the file list to use a text widget assumed incorrectly
that the list of files from git-diff-tree -r would correspond 1-1 with
the diff sections in the output of git-diff-tree -r -p -C, which is
not true when renames are detected. This fixes it by keeping the
elements in the difffilestart list in the order they appear in the
file list window.
Since this means that the elements of difffilestart are no longer
necessarily in ascending order, it's somewhat hard to do the dynamic
highlighting in the file list as the diff window is scrolled, so I
have taken that out for now.
Signed-off-by: Paul Mackerras <paulus@samba.org>
With this, one view can be used as a highlight for another, so that
the commits that are in the highlight view are displayed in bold.
This required some fairly major changes to how the list of ids,
parents, children, and id to row mapping were stored for each view.
We can now be reading in several views at once; for all except the
current view, we just update the displayorder and the lists of parents
and children for the view.
This also creates a little bit of infrastructure for handling the
watch cursor.
Signed-off-by: Paul Mackerras <paulus@samba.org>
You can now select whether you want to see the patch for a commit
or the whole tree. If you select the tree, gitk will now display
the commit message plus the contents of one file in the bottom-left
pane, when you click on the name of the file in the bottom-right pane.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This lets us do things like highlighting all the entries for which
the corresponding part of the diff is at least partly visible in the
commit/patch display window, and in future it will let us display
the file list in a hierarchical form rather than as a flat file list.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch partly changes the background color for remote refs.
It makes it easy to quickly distinguish remote refs from local
developer branches.
I ignore remote HEADs, as these really should be drawn as
aliases to other heads. But there is no simple way to
detect that HEADs really are aliases for other refs via
"git-ls-remote".
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This allows the user to change the name of the view, whether it is
permanent, and the list of files/directories for the view.
Signed-off-by: Paul Mackerras <paulus@samba.org>
With this the user can now mark a view as "permanent" and it will
appear in the list every time gitk is started (until it is deleted).
Also tidied up the view definition window, and changed the view
menu to use radiobuttons for the view selections so there is some
feedback as to which is the current view.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This uses git-rev-parse --no-revs --no-flags to give us just the
file and directory names on the command line, so that we can create
the "Command line" view if any were specified. All other arguments
just get passed to git-rev-list (without a pass through git-rev-parse).
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is a fix for a problem reported by Jim Radford where an argument
list somewhere overflows on repositories with lots of tags. In fact
it's now unnecessary to use git-rev-parse since git-rev-list can take
all the arguments that git-rev-parse can. This is inspired by but not
the same as the solutions suggested by Jim Radford and Linus Torvalds.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When moving backwards or forwards through the history list, this
automatically switches the view so that each point that we jump to
is shown in the same view that it was originally displayed in.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This bug was reported by Yann Dirson, and results in an 'Error:
expected boolean value but got ""' dialog when scrolling to the bottom
of the graph under some circumstances. The issue is that git-rev-list
isn't outputting all the boundary commits when it is asked for commits
affecting only certain files. We already cope with that by adding the
missing boundary commits in addextraid, but there we weren't adding a
0 to the end of the commitlisted list when we added the extra id to
the end of the displayorder list.
This fixes it by appending 0 to commitlisted in addextraid, thus keeping
commitlisted and displayorder in sync.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Previously, if we switched away from a view before we had finished
reading the git-rev-list output for it and laying out the graph, we
would discard the partially-laid-out graph and reread it from
scratch if we switched back to the view. With this, we preserve the
state of the partially-laid-out graph in viewdata($view) and restore
it if we switch back. The pipe to git-rev-list remains open but we
just don't read from it any more until we switch back to that view.
This also makes linesegends a list rather than an array, which turns
out to be slightly faster, as well as being easier to save and restore.
The `update' menu item now kills the git-rev-list process if there is
one still running when we do the update.
Signed-off-by: Paul Mackerras <paulus@samba.org>
- don't re-read refs when switching views, it's too slow; just do
it if the user did File->Update
- make the view menu use the uifont
- if we have a graph line selected, unselect it before changing the view
- if a row is selected and appears in the new view, but we have to
read in the new view, select that row when we come across it
- if no row was previously selected, or if we don't find the previously
selected row in the new view, select the first row
Signed-off-by: Paul Mackerras <paulus@samba.org>
If a view is selected it will now just update that view.
Also fixed a few other things - if you switch away from a view while
gitk is still reading it in, then switch back, gitk will re-read it
from scratch. We now re-read the references when switching views.
If something was selected before a view change, and we need to read
in the new view, we now select the previously-selected commit when
we come across it.
Fixed a bug in setting of rowrangelist plus a couple of other minor
things.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes the font used in the UI elements of gitk configurable in the
same way the other fonts are. The default fonts used in the Xft build of
tk8.5 are particularily horrific, making this change more important
there.
Signed-off-by: Keith Packard <keithp@neko.keithp.com>
Acked-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
For some reason, the Cygwin Tcl's `exec' command has trouble running
scripts. Fix this by using the C `git' wrapper. Other GIT programs run
by gitk are written in C already, so we don't need to incur a
performance hit of going via the wrapper (which I'll bet isn't pretty
under Cygwin).
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Acked-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
For a keyboard addict like me some keys are still missing from
gitk. Especially a key to select a commit when no commit is selected,
like just after startup. While we're at it, complete the bindings for
moving the view seperately from the selected line. Currently, the up
and down keys act on the selected line while pageup and pagedown act
on the commits viewed.
The idea is to have to normal keys change the selected line:
- Home selects first commit
- End selects last commit
- Up selects previous commit
- Down selects next commit
- PageUp moves selected line one page up
- PageDown moves selected line one page down
...and together with the Control key, it moves the commits view:
- Control-Home views first page of commits
- Control-End views last page of commits
- Control-Up moves commit view one line up
- Control-Down moves commit view one line down
- Control-PageUp moves commit view one page up
- Control-PageDown moves commit view one page down
Signed-off-By: Rutger Nijlunsing <gitk@tux.tmfweb.nl>
and with some cleanups and simplifications...
Signed-off-by: Paul Mackerras <paulus@samba.org>
Suggested by Paul Schulz. I made it a separate entry under the Help
menu rather than putting it in the About box, though.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This patch allows you to enter a head name in the SHA1 id: field.
It also removes some unnecessary global declarations.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
With this, gitk can know about the graphs for multiple sets of files
and directories of interest. Each set of files/dirs and its graph is
called a "view". There is always the "All files" view, which is the
complete graph showing all commits. If files or dirs are specified
on the command line, a "Command line" view is automatically created.
Users can create new views and switch between them, and can delete
any view except the "All files" view.
This required a bit of reengineering. In particular, some more things
that were arrays have now become lists. The idrowranges array is still
used while the graph is being laid out, but for rows that have been laid
out we use the rowrangelist list instead. The cornercrossings and
crossings arrays no longer exist, and instead we compute the crossings
when needed (in assigncolor).
Still to be done: make the back/forward buttons switch views as necessary;
make the updatecommits function work right; preserve the selection if
possible when the new view has to be read in; fix the case when the user
switches away from the current view while we are still reading it in
and laying it out; further optimizations.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This will make it easier to switch between views efficiently, and
turns out to be slightly faster as well.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Instead of adding extra padding to create a vertical line segment at
the lower end of a line that has an arrow, this now just draws a very
short vertical line segment at the lower end. This alternative
workaround for the Tk8.4 behaviour (not drawing arrows on diagonal
line segments) doesn't have the problem of making the graph very wide
when people do a lot of merges in a row (hi Junio :).
Signed-off-by: Paul Mackerras <paulus@samba.org>
When I made drawlineseg responsible for drawing the link to the first
child rather than drawparentlinks, that meant that the right-most X
value computed by drawparentlinks didn't include those first-child
links, and thus the first-child link could go over the top of the
commit headline. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
With this we run git-diff-tree on a commit even if we think it has
no parents, either because it really has no parents or because it
is a boundary commit. This means that gitk shows the diff for a
boundary commit when it is selected.
Signed-off-by: Paul Mackerras <paulus@samba.org>
With this, we can show the boundary (open-circle) commits immediately
after their last child, which looks much better than putting all the
boundary commits at the bottom of the graph.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The first was a simple typo where I put $yc instead of [yc $row].
The second was that I broke the logic for keeping up with fast
movement through the commits, e.g. when you select a commit and then
press down-arrow and let it autorepeat. That got broken when I
changed the merge diff display to use git-diff-tree --cc.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The point where the line for a parent joins to the first child
shown is visually different from the lines to the other children,
because the line doesn't branch, but terminates at the child.
Because of this, we now treat the first child a little differently
in the optimizer, and we draw its link in drawlineseg rather
than drawparentlinks. This improves the appearance of the graph.
Signed-off-by: Paul Mackerras <paulus@samba.org>
It seems Tk 8.4 can't draw arrows on diagonal line segments. This
adds code to the optimizer to make the last bit of a line go vertically
before being terminated with an arrow pointing downwards, so that
it will be drawn correctly by Tk 8.4.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If the user is doing a find in files or patches, which changed the
cursor to a watch, don't change it back to a pointer when we reach
the end of laying out the graph.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This turns out to be slightly simpler and faster, and will make
things a little easier when we do multiple view support.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Lines in a diff beginning with --- or +++ were not being displayed
at all. Thanks to Robert Fitzsimons for pointing out the obvious
fix, that lines beginning with --- or +++ are only to be suppressed
in the diff header. I also took the opportunity to replace a regexp
call with a couple of string compare calls, which should be faster.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The error popup window can be now closed not only by clicking
the button, but also by pressing Return.
Signed-Off-By: Martin Mares <mj@ucw.cz>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If you clicked on a line, so that it was drawn double-thickness,
and then scrolled to bring on-screen a child that hadn't previously
been drawn, the lines from it to the selected line were drawn
single-thickness. This fixes it so they are drawn double-thickness.
This also removes an unnecessary setting of phase in drawrest.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Now we don't parse the commits as we are reading them, we just put
commit data on a list as a blob, and instead parse the commit when
we need the various parts of it, such as when a commit is drawn on
the canvas. This makes searching a bit more interesting: now we
scan through the commit blobs doing a string or regexp match to find
commits that might match, then for those that might match, we parse
the commit info (if it isn't already parsed) and do the matching
for the various fields as before.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This rearranges the code a little to eliminate some procedure calls
and reduce the number of globals accessed. It makes rowidlist and
rowoffsets lists rather than arrays, and removes the lineid array,
since $lineid($l) was the same as [lindex $displayorder $l], and the
latter is a little faster.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This just does the simple thing of resetting everything, reading all
the commits, and redoing the whole layout from scratch. Hopefully
things are now fast enough that this simple approach is acceptable.
Also, this fits in better with future plans for adding the ability
to restrict the tree to just a few files and then expand back to
the whole tree.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is a new version of gitk which is much faster and has much better
graph layout. It achieves the speed by only drawing the parts of the
canvases that are actually visible. It also draws the commits in the
order that git-rev-list produces them, so if you use -d, you need to
have a recent enough git-rev-list that understands the --date-order
flag.
Signed-off-by: Paul Mackerras <paulus@samba.org>
It was broken by the change to supply just the child id to
git-diff-tree rather than both child and parent.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This replaces a lot of code that used the result from several 2-way
diffs to generate a combined diff for a merge. Now we just use
git-diff-tree --cc and colorize the output a bit, which is a lot
simpler, and has the enormous advantage that if the diff doesn't
show quite what someone thinks it should show, I can deflect the
blame to someone else. :)
Signed-off-by: Paul Mackerras <paulus@samba.org>
Apparently this simplifies things for the parser/compiler and makes
it go slightly faster (since without the braces, it potentially has
to do two levels of substitutions rather than one).
Signed-off-by: Paul Mackerras <paulus@samba.org>
This uses a table of encoding names and aliases distilled from
http://www.iana.org/assignments/character-sets plus some heuristics
to convert standard encoding names to ones that Tcl recognizes.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This should be more robust in the case that some does "Update" before
the initial drawing is finished. It also avoids having to reset the
list of children for each commit and reconstruct it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Update will redraw the commits if any commits have been added to any
of the selected heads. The new commits appear on the top.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
There is a lot more that could be put in, such as a selector for
the font family etc., but this is a start.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Hardcoding "utf-8" in the script breaks projects that use local
encoding, so allow setting i18n.commitEncoding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The change in 8b7e5d76e8, which makes
a couple of git-diff-tree calls supply only one id rather than two,
fixes the display when showing what a single commit did with dense
revlists, but broke the diff this->selected and diff selected->this
right-click menu functions.
Yann Dirson pointed this out and had a patch that fixed the diff
menu functions by passing a "singlecommit" flag around. This fixes
it a bit differently, by making the ids and diffids variables be
either a single id, in the case of showing what a commit did, or
{oldid newid}, in the case of the diff menu functions. That way
we can just pass $ids to git-diff-tree as is. Most of the changes
in fact are just reversing the order of ids in $ids and $diffids,
because they used to be {child parent}, but git-diff-tree requires
old id before new id.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Add gitencoding variable and set it to "utf-8". Use it for converting
git-rev-list output.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
It has a fatal flaw in that it only handles timezones that are a
multiple of an hour. It's really only needed with Tk8.5, where
the clock format command has been reimplemented in Tcl and is much
slower than in Tk8.4.
Signed-off-by: Paul Mackerras <paulus@samba.org>
