Translate 29 new messages came from git.pot update
in 11b9017 (l10n: Update git.pot (29 new messages)).
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Mediafiles can live in namespaces with names different from Image
and File. While at it, rework the code to make it simpler and easier
to read.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone --single-branch" to clone a single branch did not limit
the cloning to the specified branch.
* nd/clone-single-fix:
clone: fix ref selection in --single-branch --branch=xxx
"git diff --no-index" did not correctly handle relative paths and
did not give correct exit codes when run under "--quiet" option.
* th/diff-no-index-fixes:
diff-no-index: exit(1) if 'diff --quiet <repo file> <external file>' finds changes
diff: handle relative paths in no-index
When we get disconnected while expecting a response from the remote
side because authentication failed, we issued an error message "The
remote side hung up unexpectedly."
Give hint that it may be a permission problem in the message when we
can reasonably suspect it.
* hv/remote-end-hung-up:
remove the impression of unexpectedness when access is denied
When we try to push a ref and the right-hand side of the
refspec does not find a match, we try to create it. If it is
not fully qualified, we try to guess where it would go in
the refs hierarchy based on the left-hand source side. If
the source side is not a ref, then we give up and give a
long explanatory message.
For deletions, however, this doesn't make any sense. We
would never want to create on the remote side, and if an
unqualified ref can't be matched, it is simply an error. The
current code handles this already because the left-hand side
is empty, and therefore does not give us a hint as to where
the right-hand side should go, and we properly error out.
Unfortunately, the error message is the long "we tried to
qualify this, but the source side didn't let us guess"
message, which is quite confusing.
Instead, we can just be more succinct and say "we can't
delete this because we couldn't find it". So before:
$ git push origin :bogus
error: unable to push to unqualified destination: bogus
The destination refspec neither matches an existing ref on the remote nor
begins with refs/, and we are unable to guess a prefix based on the source ref.
error: failed to push some refs to '$URL'
and now:
$ git push origin :bogus
error: unable to delete 'bogus': remote ref does not exist
error: failed to push some refs to '$URL'
It is tempting to also catch a fully-qualified ref like
"refs/heads/bogus" and generate the same error message.
However, that currently does not error out at all, and
instead gets sent to the remote side, which typically
generates a warning:
$ git push origin:refs/heads/bogus
remote: warning: Deleting a non-existent ref.
To $URL
- [deleted] bogus
While it would be nice to catch this error early, a
client-side error would mean aborting the push entirely and
changing push's exit code. For example, right now you can
do:
$ git push origin refs/heads/foo refs/heads/bar
and end up in a state where "foo" and "bar" are deleted,
whether both of them currently exist or not (and see an
error only if we actually failed to contact the server).
Generating an error would cause a regression for this use
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes two formatting bugs in the git-config documentation:
- in the column.ui entry don't indent the last paragraph so that it isn't
formatted as a literal paragraph
- in the push.default entry separate the last paragraph from the
nested list.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the caller knows that the parameter is meant to name a commit,
e.g. "56789a" in describe name "v1.2.3-4-g56789a", pass that as a
hint so that lower level can use it to disambiguate objects when
there is only one commit whose name begins with 56789a even if there
are objects of other types whose names share the same prefix.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of a separate "int quietly" argument, make it take "unsigned
flags" so that we can pass other options to it.
The bit assignment of this flag word is exposed in cache.h because
the mechanism will be exposed to callers of the higher layer in
later commits in this series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In finish_object_disambiguation(), if the candidate hasn't been
checked, there are two cases:
- It is the first and only object that match the prefix; or
- It replaced another object that matched the prefix but that
object did not satisfy ds->fn() callback.
And the former case we set ds->candidate_ok to true without doing
anything else, while for the latter we check the candidate, which
may set ds->candidate_ok to false.
At this point in the code, ds->candidate_ok can be false only if
this last-round check found that the candidate does not pass the
check, because the state after update_candidates() returns cannot
satisfy
!ds->ambiguous && ds->candidate_exists && ds->candidate_checked
and !ds->canidate_ok at the same time.
Hence, when we execute this "return", we know we have seen more than
one object that match the prefix (and none of them satisfied ds->fn),
meaning that we should say "the short name is ambiguous", not "there
is no object that matches the prefix".
Noticed by Jeff King.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We try to find zero, one or more matches from loose objects and
packed objects independently and then decide if the given short
object name is unique across them.
Instead, introduce a "struct disambiguate_state" that keeps track of
what we have found so far, that can be one of:
- We have seen one object that _could_ be what we are looking for;
- We have also checked that object for additional constraints (if any),
and found that the object satisfies it;
- We have also checked that object for additional constraints (if any),
and found that the object does not satisfy it; or
- We have seen more than one objects that satisfy the constraints.
and pass it to the enumeration functions for loose and packed
objects. The disambiguation state can optionally take a callback
function that takes a candidate object name and reports if the
object satisifies additional criteria (e.g. when the caller knows
that the short name must refer to a commit, this mechanism can be
used to check the type of the given object).
Compared to the earlier attempt, this round avoids the optional
check if there is only one candidate that matches the short name in
the first place.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are hexadecimal and binary representation of the short object
name given to the callchain as its input. Rename them with _pfx
suffix to make it clear they are prefixes, and call them hex and bin
respectively.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the logic to find object(s) that match a given prefix inside
a single pack into a separate helper function, and give it a bit more
comment.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This variable points at the element we are currently looking at, and
does not have anything to do with the current time which the name
"now" implies.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are only two callers, and they will benefit from being able to
pass disambiguation hints to underlying get_sha1_with_context() API
once it happens.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only external caller is setup.c that tries to give a nicer error
message when an object name is misspelt (e.g. "HEAD:cashe.h").
Retire it and give the caller a dedicated and more intuitive API
function maybe_die_on_misspelt_object_name().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Julia Lawall noticed that in linux-next repository the commit object
60d5c9f5 (shown with the default abbreviation width baked into "git
blame") in output from
$ git blame -L 3675,3675 60d5c9f5b -- \
drivers/staging/brcm80211/brcmfmac/wl_iw.c
is no longer unique in the repository, which results in "short SHA1
60d5c9f5 is ambiguous".
Compute the minimum abbreviation width that ensures uniqueness when
the user did not specify the --abbrev option to avoid this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regardless of where in the directory hierarchy you are, "-" on the
command line means the standard input. The old code knew too much
about how the low level machinery uses paths to read from the
working tree and did not bother to have the same check for "-" when
the command is run from the top-level.
Unify the codepaths for subdirectory case and toplevel case into one
and make it clearer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" takes exactly two paths, not pathspecs, and
has its own way queue_diff() to populate the diff_queue. Do not
call diff_tree_setup_paths(), pretending as it takes pathspecs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split a rather heavy-ish "git completion" script out to create a
separate "git prompting" script, to help lazy-autoloading of the
completion part while making prompting part always available.
Teach "git submodule" deal with nested submodule structure where a
module is contained within a module whose origin is specified as a
relative URL to its superproject's origin.
When "--simplify-merges/by-decoration" is given together with
"--first-parent" to "git log", the combination of these options
makes the simplification logic to use in-core commit objects that
haven't been examined for relevance, either producing incorrect
result or taking too long to produce any output. Teach the
simplification logic to ignore commits that the first-parent
traversal logic ignored when both are in effect to work around the
issue.
"git add" allows adding a regular file to the path where a submodule
used to exist, but "git update-index" does not allow an equivalent
operation to Porcelain writers.
Attempt to optimize matching with an exclude pattern with a deep
directory hierarchy by taking the part that specifies leading path
without wildcard literally.
Setting this to a URL prefix instead of a path to a local directory allows
git-help --web to work even when HTML docs aren't locally installed, by
pointing the browser at a copy accessible on the web. For example,
[help]
format = html
htmlpath = http://git-scm.com/docs
will use the publicly available documentation on the git homepage.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If set in git-config, help.htmlpath overrides system_path(GIT_HTML_PATH)
which was compiled in. This allows users to repoint system-wide git at
their own copy of the documentation without recompiling.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct used to get the return code was flawed, in that
errors in the &&-chain before the semicolon were not caught. Use
the standard test_expect_code instead.
Set PATH in a subshell instead of relying on the bashism of
setting it just for a single command.
And fix the grep line so it doesn't worry about grep segfaults,
and doesn't fail for i18n issues.
Reported-by: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original t9800 test code has a mix of assorted topics, some
of which are big enough to deserve their own homes.
Interdependencies between the topics make it confusing when
trying to study one in isolation. And it takes so long to run
that debugging an individual test is difficult.
Split out three big chunks of tests into their own files:
t9812-git-p4-wildcards.sh gets the 8 p4 wildcard tests
t9813-git-p4-preserve-users.sh gets the 4 --preserve-user tests
t9814-git-p4-rename.sh gets the 2 copy and rename tests
Test 9800 execution time drops from 29 sec to 9 sec. The
sequential time to run all tests is a slower due to the three
extra p4d startup/shutdown sequences, but the overall parallel
execution time is about the same, at 52 sec.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For convenience, leave one in place at the end of each
test so that it is not necessary to build a new one. This
makes it consistent with $cli.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Msysgit testing showed that the source file found by copy
detection is indeterminate when there are multiple sources
to choose from. This appears to be valid. Adjust the test
so that it passes if it finds any of the potential copy sources.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
