Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to c6dfb39 (remote-curl: add missing initialization of
argv0_path, 2009-10-13), stand-alone programs (non-builtins)
must call git_extract_argv0_path(argv[0]) in order to help builds
that derive the installation prefix at runtime. Without this call,
the program segfaults (or raises an assertion failure).
Signed-off-by: Dima Sharov <git.avalakvista@gmail.com>
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interface for split_cmdline has changed such that the caller holds
responsibility for printing any error messages. This patch changes
the git shell to print these error messages as appropriate.
Signed-off-by: Greg Brockman <gdb@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation of 'git shell' to mention the interactive
mode and COMMAND_DIR. Also provide a hint when interactive mode is not
available in the shell.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Greg Brockman <gdb@MIT.EDU>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a mechanism for the server to expose custom
functionality to clients. My particular use case is that I would like
a way of discovering all repositories available for cloning. A
client that clones via
git clone user@example.com
can invoke a command by
ssh user@example.com $command
Signed-off-by: Greg Brockman <gdb@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change calls to die(..., strerror(errno)) to use the new die_errno().
In the process, also make slight style adjustments: at least state
_something_ about the function that failed (instead of just printing
the pathname), and put paths in single quotes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows for example gitosis to allow use of 'git archive --remote' in a
controlled environment.
Signed-off-by: Erik Broes <erikbroes@ripe.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tutorial: gentler illustration of Alice/Bob workflow using gitk
pretty=format: respect date format options
make git-shell paranoid about closed stdin/stdout/stderr
Document gitk --argscmd flag.
Fix '--dirstat' with cross-directory renaming
for-each-ref: Allow a trailing slash in the patterns
It is in general unsafe to start a program with one or more of file
descriptors 0/1/2 closed. Karl Chen for example noticed that stat_command
does this in order to rename a pipe file descriptor to 0:
dup2(from, 0);
close(from);
... but if stdin was closed (for example) from == 0, so that
dup2(0, 0);
close(0);
just ends up closing the pipe. Another extremely rare but nasty problem
would occur if an "important" file ends up in file descriptor 2, and is
corrupted by a call to die().
Fixing this in git was considered to be overkill, so this patch works
around it only for git-shell. The fix is simply to open all the "low"
descriptors to /dev/null in main.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Acked-by: Stephen R. van den Berg <srb@cuci.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit daa0cc9a92.
It was a stupid idea to do this; when run as a log-in shell,
it is spawned with argv[0] set to "-git-shell", so the usual
name-based dispatch would not work to begin with.
This trivially makes "git-shell" a built-in. It makes the executable even
fatter, though.
And MinGW removed git-shell only because of the funny dependencies; there
is no reason to do so anymore.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-on-MinGW-by: Johannes Sixt <johannes.sixt@telecom.at>
Playing with linker games to shrink git-shell did not go well with various
other platforms and compilers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will need the command invocation path in system_path(). This path was
passed to setup_path(), but system_path() can be called earlier, for
example via:
main
commit_pager_choice
setup_pager
git_config
git_etc_gitconfig
system_path
Therefore, we introduce git_set_argv0_path() and call it as soon as
possible.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of modules that have nothing to do with git-shell functionality
were linked in, bloating git-shell more than 8 times.
This patch cuts off redundant dependencies by:
1. providing stubs for three functions that make no sense for git-shell;
2. moving quote_path_fully from environment.c to quote.c to make the
later self sufficient;
3. moving make_absolute_path into a new separate file.
The following numbers have been received with the default optimization
settings on master using GCC 4.1.2:
Before:
text data bss dec hex filename
143915 1348 93168 238431 3a35f git-shell
After:
text data bss dec hex filename
17670 788 8232 26690 6842 git-shell
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a backport of 0a47dc110e
to 'maint' to be included in 1.5.6.2 so that older server side
can accept dashless form of request when clients are updated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shell currently does its own manual thing for setting up the $PATH;
it can now call setup_path().
Signed-off-by: Scott R Parish <srp@srparish.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds cvs support to the git-shell; You can now give new users
a restricted git-shell and they still can commit via git's cvs
emulator.
Note that either the gecos information must be accurate, or you must
provide a $HOME/.gitconfig with the appropriate user credentials.
Since the git-shell is too restricted to allow the user to do it
(on purpose!), it is up to the administrator to take care of that.
Based on an idea by Jan Wielemaker.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
Mark Wooding noticed there was a type mismatch warning in git.c; this
patch does things slightly differently (mostly tightening const) and
was what I was holding onto, waiting for the setup-revisions change
to be merged into the master branch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git suite may not be in PATH (and thus programs such as
git-send-pack could not exec git-rev-list). Thus there is a need for
logic that will locate these programs. Modifying PATH is not
desirable as it result in behavior differing from the user's
intentions, as we may end up prepending "/usr/bin" to PATH.
- git C programs will use exec*_git_cmd() APIs to exec sub-commands.
- exec*_git_cmd() will execute a git program by searching for it in
the following directories:
1. --exec-path (as used by "git")
2. The GIT_EXEC_PATH environment variable.
3. $(gitexecdir) as set in Makefile (default value $(bindir)).
- git wrapper will modify PATH as before to enable shell scripts to
invoke "git-foo" commands.
Ideally, shell scripts should use the git wrapper to become independent
of PATH, and then modifying PATH will not be necessary.
[jc: with minor updates after a brief review.]
Signed-off-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a very git specific restricted shell, that can be
added to /etc/shells and set to the pw_shell in the /etc/passwd
file, to give users ability to push into repositories over ssh
without giving them full interactive shell acount.
[jc: I updated Linus' patch to match what the current sq_quote()
does.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
