The FETCH_HEAD refname is supposed to refer to the ref that was fetched
and should be merged. However all fetched refs are written to
.git/FETCH_HEAD in an arbitrary order, and resolve_ref_unsafe simply
takes the first ref as the FETCH_HEAD, which is often the wrong one,
when other branches were also fetched.
The solution is to write the for-merge ref(s) to FETCH_HEAD first.
Then, unless --append is used, the FETCH_HEAD refname behaves as intended.
If the user uses --append, they presumably are doing so in order to
preserve the old FETCH_HEAD.
While we are at it, update an old example in the read-tree documentation
that implied that each entry in FETCH_HEAD only has the object name, which
is not true for quite a while.
[jc: adjusted tests]
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 34110cd4 (Make 'unpack_trees()' have a separate source and
destination index) it is no longer true that a subdirectory with
the same prefix must not exist.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-doc-sparse-checkout:
git-read-tree.txt: correct sparse-checkout and skip-worktree description
git-read-tree.txt: language and typography fixes
unpack-trees: print "Aborting" to stderr
* mg/maint-doc-sparse-checkout:
git-read-tree.txt: correct sparse-checkout and skip-worktree description
git-read-tree.txt: language and typography fixes
unpack-trees: print "Aborting" to stderr
The negation example uses '*' to match everything. This used to work
before 9037026 (unpack-trees: fix sparse checkout's "unable to match
directories") because back then, the list of paths is used to match
sparse patterns, so with the patterns
*
!subdir/
subdir/ always matches any path that start with subdir/ and "*" has no
chance to get tested. The result is subdir is excluded.
After the said commit, a tree structure is dynamically created and
sparse pattern matching now follows closely how read_directory()
applies .gitignore. This solves one problem, but reveals another one.
With this new strategy, "!subdir/" rule will be only tested once when
"subdir" directory is examined. Entries inside subdir, when examined,
will match "*" and are (correctly) re-added again because any rules
without a slash will match at every directory level. In the end, "*"
can revert every negation rules.
In order to correctly exclude subdir, we must use
/*
!subdir
to limit "match all" rule at top level only.
"*" rule has no actual use in sparse checkout and can be confusing to
users. While we can automatically turn "*" to "/*", this violates
.gitignore definition. Instead, discourage "*" in favor of "/*" (in
the second example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of .git/info/sparse-checkout and
skip-worktree is exactly the opposite of what is true, which is:
If a file matches a pattern in sparse-checkout, then (it is to be
checked out and therefore) skip-worktree is unset for that file;
otherwise, it is set (so that it is not checked out).
Currently, the opposite is documented, and (consistently) read-tree's
behavior with respect to bit flips is descibed incorrectly.
Fix it.
In hindsight, it would have been much better to have a "sparse-ignore"
or "sparse-skip" file so that an empty file would mean a full checkout,
and the file logic would be analogous to that of .gitignore, excludes
and skip-worktree.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a few missing articles and such, and mark-up 'commands' and `files`
appropriately.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option can be used to check if read-tree with the same set of other
options like "-m" and "-u" would succeed without actually changing either
the index or the working tree.
The relevant tests in the t10?? range were extended to do a read-tree -n
before the real read-tree to make sure neither the index nor any local
files were changed with -n and the same exit code as without -n is
returned. The helper functions added for that purpose reside in the new
t/lib-read-tree.sh file.
The only exception is #13 in t1004 ("unlinking an un-unlink-able
symlink"). As this is an issue of wrong directory permissions it is not
detected with -n.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
* nd/maint-fix-add-typo-detection:
Revert "excluded_1(): support exclude files in index"
unpack-trees: fix sparse checkout's "unable to match directories"
unpack-trees: move all skip-worktree checks back to unpack_trees()
dir.c: add free_excludes()
cache.h: realign and use (1 << x) form for CE_* constants
Matching index entries against an excludes file currently has two
problems.
First, there's no function to do it. Code paths (like sparse
checkout) that wanted to try it would iterate over index entries and
for each index entry pass that path to excluded_from_list(). But that
is not how excluded_from_list() works; one is supposed to feed in each
ancester of a path before a given path to find out if it was excluded
because of some parent or grandparent matching a
bigsubdirectory/
pattern despite the path not matching any .gitignore pattern directly.
Second, it's inefficient. The excludes mechanism is supposed to let
us block off vast swaths of the filesystem as uninteresting; separately
checking every index entry doesn't fit that model.
Introduce a new function to take care of both these problems. This
traverses the index in depth-first order (well, that's what order the
index is in) to mark un-excluded entries.
Maybe some day the in-core index format will be restructured to make
this sort of operation easier. Or maybe we will want to try some
binary search based thing. The interface is simple enough to allow
all those things. Example:
clear_ce_flags(the_index.cache, the_index.cache_nr,
CE_CANDIDATE, CE_CLEARME, exclude_list);
would clear the CE_CLEARME flag on all index entries with
CE_CANDIDATE flag and not matched by exclude_list.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, read-tree can be run without tree-ish arguments, in which
case it will empty the index. Since this behavior is undocumented and
perhaps a bit too invasive to be the "default" action for read-tree,
deprecate it in favor of a new --empty option that does the same thing.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify the description of the 2-tree merge by defining the terms
which are used in the table, and by applying some small linguistic
changes.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc takes the first non-space character in the first line of the
paragraph as a reference point for preformatted layout, so adjust to
that to make the table align.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
* nd/sparse: (25 commits)
t7002: test for not using external grep on skip-worktree paths
t7002: set test prerequisite "external-grep" if supported
grep: do not do external grep on skip-worktree entries
commit: correctly respect skip-worktree bit
ie_match_stat(): do not ignore skip-worktree bit with CE_MATCH_IGNORE_VALID
tests: rename duplicate t1009
sparse checkout: inhibit empty worktree
Add tests for sparse checkout
read-tree: add --no-sparse-checkout to disable sparse checkout support
unpack-trees(): ignore worktree check outside checkout area
unpack_trees(): apply $GIT_DIR/info/sparse-checkout to the final index
unpack-trees(): "enable" sparse checkout and load $GIT_DIR/info/sparse-checkout
unpack-trees.c: generalize verify_* functions
unpack-trees(): add CE_WT_REMOVE to remove on worktree alone
Introduce "sparse checkout"
dir.c: export excluded_1() and add_excludes_from_file_1()
excluded_1(): support exclude files in index
unpack-trees(): carry skip-worktree bit over in merged_entry()
Read .gitignore from index if it is skip-worktree
Avoid writing to buffer in add_excludes_from_file_1()
...
Conflicts:
.gitignore
Documentation/config.txt
Documentation/git-update-index.txt
Makefile
entry.c
t/t7002-grep.sh
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
This patch introduces core.sparseCheckout, which will control whether
sparse checkout support is enabled in unpack_trees()
It also loads sparse-checkout file that will be used in the next patch.
I split it out so the next patch will be shorter, easier to read.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With skip-worktree bit, you can manually set it to unwanted files,
then remove them: you would have the so-called sparse checkout. The
disadvantages are:
- Porcelain tools are not aware of this. Everytime you do an
operation that may update working directory, skip-worktree may be
cleared out. You have to set them again.
- You still have to remove skip-worktree'd files manually, which is
boring and ineffective.
These will be addressed in the following patches. This patch gives an
idea what is "sparse checkout" in Documentation/git-read-tree.txt.
This file is chosen instead of git-checkout.txt because it is quite
technical and user-unfriendly. I'd expect git-checkout.txt to have
something when Porcelain support is done.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleanup the documentation to explicitly state that --exclude-directory
is only meaningful when used with -u. Also make the documentation more
consistent with the usage message printed with read-tree --help-all.
The -m, --prefix, --reset options are performing similar actions
(setting some flags, read_cache_unmerged(), checking for illegal option
combinations). Instead of performing these actions when the options are
parsed, we delay performing them until after parse-opts has finished.
The bit fields in struct unpack_trees_options have been promoted to full
unsigned ints. This is necessary to avoid "foo ? 1 : 0" constructs to
set these fields.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to checkout a different commit implements the safety to never
lose user's local changes. For example, switching from a commit to
another commit, when you have changed a path that is different between
them, need to merge your changes to the version from the switched-to
commit, which you may not necessarily be able to resolve easily. By
default, "git checkout" refused to switch branches, to give you a chance
to stash your local changes (or use "-m" to merge, accepting the risks of
getting conflicts).
This safety, however, had one deliberate hole since early June 2005. When
your local change was to remove a path (and optionally to stage that
removal), the command checked out the path from the switched-to commit
nevertheless.
This was to allow an initial checkout to happen smoothly (e.g. an initial
checkout is done by starting with an empty index and switching from the
commit at the HEAD to the same commit). We can tighten the rule slightly
to allow this special case to pass, without losing sight of removal
explicitly done by the user, by noticing if the index is truly empty when
the operation begins.
For historical background, see:
http://thread.gmane.org/gmane.comp.version-control.git/4641/focus=4646
This case is marked as *0* in the message, which both Linus and I said "it
feels somewhat wrong but otherwise we cannot start from an empty index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This corrects the interface mistake of the previous one, and
gives a command line parameter to the only plumbing command that
currently needs it: "git-read-tree".
We can add the calls to set_alternate_index_output() to other
plumbing commands that update the index if/when needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
Documentation: git aliases
git-cvsserver asciidoc formatting tweaks
config.txt grammar, typo, and asciidoc fixes
Documentation: git-ls-tree (typofix)
Document git-ls-tree --fullname
Document git aliases support
make clean: remove dist-doc targets.
Misc doc improvements
Documentation: add missing docs make check-docs found.
Some doc typo fixes
Off-by-one error in get_path_prefix(), found by Valgrind
gitk: Re-read the descendent/ancestor tag & head info on update
All should be clear enough, except perhaps committish / commitish.
I just kept the more-used one within the current docs.
[jc: with rephrasing of check-ref-format description later discussed
on the list]
Signed-off-by: Francis Daly <francis@daoine.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* vb/sendemail:
Cleanup git-send-email.perl:extract_valid_email
read-tree --reset: update working tree file for conflicted paths.
Documentation: Spelling fixes
Builtin git-rev-parse.
fetch: do not report "same" unless -verbose.
With "--prefix=<path>/" option, read-tree keeps the current
index contents, and reads the contents of named tree-ish under
directory at `<prefix>`. The original index file cannot have
anything at the path `<prefix>` itself, and have nothing in
`<prefix>/` directory. This can be used to graft an
independent tree into a subdirectory of the current index.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The merge-one-file used to leave the working tree intact, but
it has long been changed to leave the merge result there since
2a68a8659f commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
