As of Mac OS X 10.7, Apple deprecated all OpenSSL functions due to
OpenSSL ABI instability, thus leading to build warnings. As a
replacement, Apple encourages developers to migrate to its own (stable)
CommonCrypto facility.
Introduce boilerplate which controls whether Apple's CommonCrypto
facility is employed (enabled by default). Also add a
NO_APPLE_COMMON_CRYPTO build flag with which the user can opt out to
use OpenSSL instead.
[es: extracted CommonCrypto-related Makefile boilerplate into separate
introductory patch]
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Due to a bug in the Darwin kernel, write(2) calls have a maximum size
of INT_MAX bytes.
Introduce a new compat function, clipped_write(), that only writes
at most INT_MAX bytes and returns the number of bytes written, as
a substitute for write(2), and allow platforms that need this to
enable it from the build mechanism with NEEDS_CLIPPED_WRITE.
Set it for Mac OS X by default. It may be necessary to include this
function on Windows, too.
Signed-off-by: Filipe Cabecinhas <filcab+git@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the 'coverage' target to build coverage-untested-functions by
default, so as to make it more discoverable.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user sets DEFAULT_TEST_TARGET=prove in his config.mak, that
carries over into the coverage tests. Which is really bad if he also
sets GIT_PROVE_OPTS=-j<..> as that completely breaks the coverage
runs.
Instead of attempting to mess with the GIT_PROVE_OPTS, just force the
test target to 'test' so that we run under make, like we intended all
along.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The coverage-compile target depends on coverage-clean, which is
supposed to remove the earlier build products that would get in the
way of the next coverage test run.
However, removing *.gcno is actively wrong. These are the files that
contain the compile-time coverage related data. They are only rebuilt
if the source is compiled. So if one ran 'make coverage' two times in
a row, the second run would remove *.gcno, but then fail to recreate
them because neither source files nor build flags have changed. (This
remained hidden for so long most likely because any other intervening
use of 'make' will change the build flags, causing a full rebuild.)
So we make an exception for *.gcno. The *.gcda are the coverage
results, written when the gcov-instrumented program is run. We still
remove those, so as to get a one-test-run view of the data; you could
probably argue the other way too.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Confusingly, the coverage-build target in fact builds with gcov
support _and runs tests_.
Split it into two targets that actually are named after what they do.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0070-fundamental.sh fails on Mac OS X 10.8:
$ uname -a
Darwin lustrous 12.2.0 Darwin Kernel Version 12.2.0:
Sat Aug 25 00:48:52 PDT 2012;
root:xnu-2050.18.24~1/RELEASE_X86_64 x86_64
$ ./t0070-fundamental.sh -v
fatal: regex bug confirmed: re-build git with NO_REGEX=1
Fix it by using Git's regex library.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 380a4d92 ("Update cygwin.c for new mingw-64 win32 api headers",
11-11-2012) solved an header include order problem on cygwin 1.7 when
using the new mingw-64 WIN32 API headers. The solution involved using
a new build variable (V15_MINGW_HEADERS) to conditionally compile the
cygwin.c source file to use an include order appropriate for the old
and new header files. (The build variable was later renamed in commit
9fca6cff to CYGWIN_V15_WIN32API).
The include order used for cygwin 1.7 includes the "win32.h" header
before "../git-compat-util.h". This order was problematic on cygwin
1.5, since it lead to the WIN32 symbol being defined along with the
inclusion of some WIN32 API headers (e.g. <winsock2.h>) which cause
compilation errors.
The header include order problem on cygwin 1.5 has since been fixed
(see commit "mingw: rename WIN32 cpp macro to GIT_WINDOWS_NATIVE"),
so we can now remove the conditional compilation along with the
associated CYGWIN_V15_WIN32API build variable.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
pack-refs.c doesn't contain much code, and the code it does contain is
closely related to reference handling. Moreover, there is some
duplication between pack_refs() and repack_without_ref(). Therefore,
merge pack-refs.c into refs.c and pack-refs.h into refs.h.
The code duplication will be addressed in future commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most test results go in $TEST_OUTPUT_DIRECTORY, but the output files for
tests run with --tee or --valgrind just use bare "test-results".
Changes these so that they do respect $TEST_OUTPUT_DIRECTORY.
As a result of this, the valgrind/analyze.sh script may no longer
inspect the correct files so it is also updated to respect
$TEST_OUTPUT_DIRECTORY by adding it to GIT-BUILD-OPTIONS. This may be a
regression for people who have TEST_OUTPUT_DIRECTORY in their config.mak
but want to override it in the environment, but this change merely
brings it into line with GIT_TEST_OPTS which already cannot be
overridden if it is specified in config.mak.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like all the other shell scripts, replace the shebang line to
make sure it runs under the shell the user specified.
As this no longer depends on bashisms, t5801 does not have to say
bash must be available somewhere on the system.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Sparse issues many "Using plain integer as NULL pointer" warnings
while checking nedmalloc.c (at least 98 such warnings before giving
up due to "too many warnings"). In addition, sparse issues some
"non-ANSI function declaration" type warnings for the symbols
'win32_getcurrentthreadid', 'malloc_stats' and 'malloc_footprint'.
In order to suppress the NULL pointer warnings, rather than replace
all uses of '0' as a null pointer representation with NULL, we add
-Wno-non-pointer-null to SPARSE_FLAGS while checking nedmalloc.c.
In order to suppress the "non-ANSI function declaration" warnings,
we simply include the missing 'empty parameter list' prototype (void)
in the function declarations.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the three variables safer to be exported to submakes by
ensuring that they are full paths so that they can be used as
installation location.
* jk/common-make-variables-export-safety:
Makefile: make mandir, htmldir and infodir absolute
This is a rewrite of much of Bo's work, mainly in an effort to split
it into smaller, easier to understand routines.
The algorithm is built around the struct range_set, which encodes a
series of line ranges as intervals [a,b). This is used in two
contexts:
* A set of lines we are tracking (which will change as we dig through
history).
* To encode diffs, as pairs of ranges.
The main routine is range_set_map_across_diff(). It processes the
diff between a commit C and some parent P. It determines which diff
hunks are relevant to the ranges tracked in C, and computes the new
ranges for P.
The algorithm is then simply to process history in topological order
from newest to oldest, computing ranges and (partial) diffs. At
branch points, we need to merge the ranges we are watching. We will
find that many commits do not affect the chosen ranges, and mark them
TREESAME (in addition to those already filtered by pathspec limiting).
Another pass of history simplification then gets rid of such commits.
This is wired as an extra filtering pass in the log machinery. This
currently only reduces code duplication, but should allow for other
simplifications and options to be used.
Finally, we hook a diff printer into the output chain. Ideally we
would wire directly into the diff logic, to optionally use features
like word diff. However, that will require some major reworking of
the diff chain, so we completely replace the output with our own diff
for now.
As this was a GSoC project, and has quite some history by now, many
people have helped. In no particular order, thanks go to
Jakub Narebski <jnareb@gmail.com>
Jens Lehmann <Jens.Lehmann@web.de>
Jonathan Nieder <jrnieder@gmail.com>
Junio C Hamano <gitster@pobox.com>
Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Will Palmer <wmpalmer@gmail.com>
Apologies to everyone I forgot.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to use the same style of -L n,m argument for 'git log -L' as
for git-blame. Refactor the argument parsing of the range arguments
from builtin/blame.c to the (new) file that will hold the 'git log -L'
logic.
To accommodate different data structures in blame and log -L, the file
contents are abstracted away; parse_range_arg takes a callback that it
uses to get the contents of a line of the (notional) file.
The new test is for a case that made me pause during debugging: the
'blame -L with invalid end' test was the only one that noticed an
outright failure to parse the end *at all*. So make a more explicit
test for that.
Signed-off-by: Bo Yang <struggleyb.nku@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rev-parse: clarify documentation of $name@{upstream} syntax
sha1_name: pass object name length to diagnose_invalid_sha1_path()
Makefile: keep LIB_H entries together and sorted
As a follow-up to 60d24dd25 (Makefile: fold XDIFF_H and VCSSVN_H into
LIB_H), let the unconditional additions to LIB_H form a single sorted
list. Also drop the duplicate entry for xdiff/xdiff.h, which was easy
to spot after sorting.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 78457bc0cc.
commit 28c5d9e ("vcs-svn: drop string_pool") previously removed
the only call-site for strtok_r. So let's get rid of the compat
implementation as well.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the use of the variables with the same names in autotools,
reducing the potential for user surprise.
Using relative paths in these variables also causes issues if they are
exported from the Makefile, as discussed in commit c09d62f (Makefile: do
not export mandir/htmldir/infodir, 2013-02-12).
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A change made on v1.8.1.x maintenance track had a nasty regression
to break the build when autoconf is used.
* jn/less-reconfigure:
Makefile: avoid infinite loop on configure.ac change
If you are using autoconf and change the configure.ac, the
Makefile will notice that config.status is older than
configure.ac, and will attempt to rebuild and re-run the
configure script to pick up your changes. The first step in
doing so is to run "make configure". Unfortunately, this
tries to include config.mak.autogen, which depends on
config.status, which depends on configure.ac; so we must
rebuild config.status. Which leads to us running "make
configure", and so on.
It's easy to demonstrate with:
make configure
./configure
touch configure.ac
make
We can break this cycle by not re-invoking make to build
"configure", and instead just putting its rules inline into
our config.status rebuild procedure. We can avoid a copy by
factoring the rules into a make variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"make COMPUTE_HEADER_DEPENDENCIES=no clean" would try to run "rm
-rf $(dep_dirs)" with an empty dep_dir, but some implementations of
"rm -rf" barf on an empty argument list.
* mk/make-rm-depdirs-could-be-empty:
Makefile: don't run "rm" without any files
When COMPUTE_HEADER_DEPENDENCIES is set to "auto" and the compiler
does not support it, $(dep_dirs) becomes empty. "make clean" runs
"rm -rf $(dep_dirs)", which can fail in such a case.
Signed-off-by: Matt Kraai <matt.kraai@amo.abbott.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expat 1.1 and 1.2 provide xmlparse.h instead of expat.h. Include the
former on systems that define the EXPAT_NEEDS_XMLPARSE_H variable and
define that variable on QNX systems, which ship with expat 1.1.
Signed-off-by: Matt Kraai <matt.kraai@amo.abbott.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git's Makefile provides a few nice features for script build and
installation (substitute the first line with the right path, hardcode the
path to Git library, ...).
The Makefile already knows how to process files outside the toplevel
directory with e.g.
make SCRIPT_PERL=path/to/file.perl path/to/file
but we can make it simpler for callers by exposing build, install and
clean rules as .PHONY targets.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Buggy versions of ccache broke the auto-generation of dependencies.
* jn/auto-depend-workaround-buggy-ccache:
Makefile: explicitly set target name for autogenerated dependencies
An age-old workaround to prevent buggy versions of ccache from
breaking the auto-generation of dependencies, which unfortunately
is still relevant because some people use ancient distros.
* jn/auto-depend-workaround-buggy-ccache:
Makefile: explicitly set target name for autogenerated dependencies
* jc/merge-blobs:
Makefile: Replace merge-file.h with merge-blobs.h in LIB_H
merge-tree: fix d/f conflicts
merge-tree: add comments to clarify what these functions are doing
merge-tree: lose unused "resolve_directories"
merge-tree: lose unused "flags" from merge_list
Which merge_file() function do you mean?
"gcc -MF depfile -MMD -MP -c -o path/to/file.o" produces a makefile
snippet named "depfile" describing what files are needed to build the
target given by "-o". When ccache versions before v3.0pre0~187 (Fix
handling of the -MD and -MDD options, 2009-11-01) run, they execute
gcc -MF depfile -MMD -MP -E
instead to get the final content for hashing. Notice that the "-c -o"
combination is replaced by "-E". The result is a target name without
a leading path.
Thus when building git with such versions of ccache with
COMPUTE_HEADER_DEPENDENCIES enabled, the generated makefile snippets
define dependencies for the wrong target:
$ make builtin/add.o
GIT_VERSION = 1.7.8.rc3
* new build flags or prefix
CC builtin/add.o
$ head -1 builtin/.depend/add.o.d
add.o: builtin/add.c cache.h git-compat-util.h compat/bswap.h strbuf.h \
After a change in a header file, object files in a subdirectory are
not automatically rebuilt by "make":
$ touch cache.h
$ make builtin/add.o
$
Luckily we can prevent trouble by explicitly supplying the name of the
target to ccache and gcc, using the -MQ option. Do so.
Reported-and-tested-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Reported-by: : 허종만 <jongman.heo@samsung.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace our use of fnmatch(3) with a more feature-rich wildmatch.
A handful patches at the bottom have been moved to nd/wildmatch to
graduate as part of that branch, before this series solidifies.
We may want to mark USE_WILDMATCH as an experimental curiosity a
bit more clearly (i.e. should not be enabled in production
environment, because it will make the behaviour between builds
unpredictable).
* nd/retire-fnmatch:
Makefile: add USE_WILDMATCH to use wildmatch as fnmatch
wildmatch: advance faster in <asterisk> + <literal> patterns
wildmatch: make a special case for "*/" with FNM_PATHNAME
test-wildmatch: add "perf" command to compare wildmatch and fnmatch
wildmatch: support "no FNM_PATHNAME" mode
wildmatch: make dowild() take arbitrary flags
wildmatch: rename constants and update prototype
Add a new command "git check-ignore" for debugging .gitignore
files.
The variable names may want to get cleaned up but that can be done
in-tree.
* as/check-ignore:
clean.c, ls-files.c: respect encapsulation of exclude_list_groups
t0008: avoid brace expansion
add git-check-ignore sub-command
setup.c: document get_pathspec()
add.c: extract new die_if_path_beyond_symlink() for reuse
add.c: extract check_path_for_gitlink() from treat_gitlinks() for reuse
pathspec.c: rename newly public functions for clarity
add.c: move pathspec matchers into new pathspec.c for reuse
add.c: remove unused argument from validate_pathspec()
dir.c: improve docs for match_pathspec() and match_pathspec_depth()
dir.c: provide clear_directory() for reclaiming dir_struct memory
dir.c: keep track of where patterns came from
dir.c: use a single struct exclude_list per source of excludes
Conflicts:
builtin/ls-files.c
dir.c
Commit fa2364ec ("Which merge_file() function do you mean?", 06-12-2012)
renamed the files merge-file.[ch] to merge-blobs.[ch], but forgot to
rename the header file in the definition of the LIB_H macro.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the disused merge-tree proof-of-concept code.
* jc/merge-blobs:
merge-tree: fix d/f conflicts
merge-tree: add comments to clarify what these functions are doing
merge-tree: lose unused "resolve_directories"
merge-tree: lose unused "flags" from merge_list
Which merge_file() function do you mean?
When autoconf is used, any build on a different commit always ran
"config.status --recheck" even when unnecessary.
* jn/less-reconfigure:
build: do not automatically reconfigure unless configure.ac changed
When make is run, the python scripts are created from *.py files that
are changed to use the python given by PYTHON_PATH. And PYTHON_PATH
is set by default to /usr/bin/python on Linux.
However, next time make is run with a different value in PYTHON_PATH,
we failed to regenerate these scripts.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the bits to set fallback default based on the platform from
the main Makefile to a separate file, so that it can be included in
Makefiles in subdirectories.
* jk/config-uname:
Makefile: hoist uname autodetection to config.mak.uname
Allows pathname patterns in .gitignore and .gitattributes files
with double-asterisks "foo/**/bar" to match any number of directory
hierarchies.
* nd/wildmatch:
wildmatch: replace variable 'special' with better named ones
compat/fnmatch: respect NO_FNMATCH* even on glibc
wildmatch: fix "**" special case
t3070: Disable some failing fnmatch tests
test-wildmatch: avoid Windows path mangling
Support "**" wildcard in .gitignore and .gitattributes
wildmatch: make /**/ match zero or more directories
wildmatch: adjust "**" behavior
wildmatch: fix case-insensitive matching
wildmatch: remove static variable force_lower_case
wildmatch: make wildmatch's return value compatible with fnmatch
t3070: disable unreliable fnmatch tests
Integrate wildmatch to git
wildmatch: follow Git's coding convention
wildmatch: remove unnecessary functions
Import wildmatch from rsync
ctype: support iscntrl, ispunct, isxdigit and isprint
ctype: make sane_ctype[] const array
Conflicts:
Makefile
When autoconf is used, any build on a different commit always ran
"config.status --recheck" even when unnecessary.
* jn/less-reconfigure:
build: do not automatically reconfigure unless configure.ac changed
Remove leftover bits from an earlier change to move gitk in its own
subdirectory. Reimplementing the dependency tracking rules needs
to be done in gitk history separately.
* cc/no-gitk-build-dependency:
Makefile: replace "echo 1>..." with "echo >..."
Makefile: detect when PYTHON_PATH changes
Makefile: remove tracking of TCLTK_PATH
Extract the following functions from builtin/add.c to pathspec.c, in
preparation for reuse by a new git check-ignore command:
- fill_pathspec_matches()
- find_used_pathspec()
The functions being extracted are not changed in any way, except
removal of the 'static' qualifier.
Also add comments documenting these newly public functions,
including clarifications that they operate on the index.
Signed-off-by: Adam Spiers <git@adamspiers.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no documented, reliable, and future-proof method to
determine the installed w32api version on Cygwin. There are many
things that can be done that will work frequently, except when they
won't.
The only sane thing is to follow the guidance of the Cygwin
developers: the only supported configuration is that which the
current setup.exe produces, and in the case of problems, if the
installation is not up to date then updating is the first required
action.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Various updates to fast-export used in the context of the remote
helper interface.
* fc/fast-export-fixes:
fast-export: make sure updated refs get updated
fast-export: don't handle uninteresting refs
fast-export: fix comparison in tests
fast-export: trivial cleanup
remote-testgit: implement the "done" feature manually
remote-testgit: report success after an import
remote-testgit: exercise more features
remote-testgit: cleanup tests
remote-testgit: remove irrelevant test
remote-testgit: remove non-local functionality
Add new simplified git-remote-testgit
Rename git-remote-testgit to git-remote-testpy
remote-helpers: fix failure message
remote-testgit: fix direction of marks
fast-export: avoid importing blob marks
Our Makefile first sets up some sane per-platform defaults
by looking at "uname", then modifies that according to the
results of autoconf (if any), then modifies that according
to the user's wishes in config.mak.
For sub-Makefiles like Documentation/Makefile, the latter
two are available, but the uname defaults are available only
to the main Makefile. This hasn't been a problem so far,
because the sub-Makefiles do not rely on any of those
automatic settings to do their work.
This patch puts the uname magic into its own file so it can
be reused in other Makefiles, opening up the possibility of
new knobs.
Note that we leave one reference to uname in the top-level
Makefile: if we are on Darwin, we must check the NO_FINK and
NO_DARWIN_PORTS settings. But because we are combining uname
settings with user-options, we must do so after all of the
config is loaded. This is acceptable, as the resulting
conditionals are about setting variables specific to the
top-level Makefile (and if that ever changes, we can hoist
them into a separate post-config include, too).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few more knobs for new platform ports can tweak.
* dm/port:
git-compat-util.h: do not #include <sys/param.h> by default
Generalize the inclusion of strings.h
Detect when the passwd struct is missing pw_gecos
Support builds when sys/param.h is missing
Starting with v1.7.12-rc0~4^2 (build: reconfigure automatically if
configure.ac changes, 2012-07-19), "config.status --recheck" is
automatically run every time the "configure" script changes. In
particular, that means the configuration procedure repeats whenever
the version number changes (since the configure script changes to
support "./configure --version" and "./configure --help"), making
bisecting painfully slow.
The intent was to make the reconfiguration process only trigger for
changes to configure.ac's logic. Tweak the Makefile rule to match
that intent by depending on configure.ac instead of configure.
Reported-by: Martin von Zweigbergk <martinvonz@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is similar to NO_FNMATCH but it uses wildmatch instead of
compat/fnmatch. This is an intermediate step to let wildmatch be used
as fnmatch replacement for wider audience before it replaces fnmatch
completely and compat/fnmatch is removed.
fnmatch in test-wildmatch is not impacted by this and is the only
place that NO_FNMATCH or NO_FNMATCH_CASEFOLD remain active when
USE_WILDMATCH is set.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we allowed platforms that lack <sys/param.h> not to include
the header file from git-compat-util.h; we have included this header
file since the early days back when we used MAXPATHLEN (which we no
longer use) and also depended on it slurping ULONG_MAX (which we get
by including stdint.h or inttypes.h these days).
It turns out that we can compile our modern codebase just file
without including it on many platforms (so far, Fedora, Debian,
Ubuntu, MinGW, Mac OS X, Cygwin, HP-Nonstop, QNX and z/OS are
reported to be OK).
Let's stop including it by default, and on platforms that need it to
be included, leave "make NEEDS_SYS_PARAM_H=YesPlease" as an escape
hatch and ask them to report to us, so that we can find out about
the real dependency and fix it in a more platform agnostic way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When make is run, the python scripts are created from *.py files that
are changed to use the python given by PYTHON_PATH. And PYTHON_PATH
is set by default to /usr/bin/python on Linux.
This is nice except when you run make another time setting a
different PYTHON_PATH, because, as the python scripts have already
been created, make finds nothing to do.
The goal of this patch is to detect when the PYTHON_PATH changes and
to create the python scripts again when this happens. To do that we
use the same trick that is done to track other variables like prefix,
flags, tcl/tk path and shell path. We update a GIT-PYTHON-VARS file
with the PYTHON_PATH and check if it changed.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It looks like we are tracking the value of TCLTK_PATH in the main
Makefile for no good reason.
This patch removes the useless code used to do this tracking.
Maybe this code should have been moved to gitk-git/Makefile by
62ba514 (Move gitk to its own subdirectory, 2007-11-17).
A patch to do that has just been sent to Paul Mackerras, the gitk
maintainer.
While at it, this patch removes /gitk-git/gitk-wish from
.gitignore as it should be in /gitk-git/.gitignore and the patch
sent to Paul put it there.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The header strings.h was formerly only included for HP NonStop (aka
Tandem) to define strcasecmp, but another platform requiring this
inclusion has been found. The build system will now include the
file based on its presence determined by configure.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
NO_GECOS_IN_PWENT was documented with other Makefile variables but was only
enforced by manually defining it to the C preprocessor. This adds support
for detecting the condition with configure and defining the make variable.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An option is added to the Makefile to skip the inclusion of sys/param.h.
The only known platform with this condition thus far is the z/OS UNIX System
Services environment.
Signed-off-by: David Michael <fedora.dm0@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently use a single space before and after the "=" (or ":=", "+=",
etc.) in assignments to make macros. Granted, this was not a big deal,
but I did find the needless inconsistency quite distracting.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two different static functions and one global function,
all of them called "merge_file()", with different signatures and
purposes. Rename them all to reduce confusion in "git grep" output:
* Rename the static one in merge-index to "merge_one_path(const char
*path)" as that function is about asking an external command to
resolve conflicts in one path.
* Rename the global one in merge-file.c that is only used by
merge-tree to "merge_blobs()", as the function takes three blobs and
returns the merged result only in-core, without doing anything to
the filesystem.
* Rename the one in merge-recursive to "merge_one_file()", just to be
fair.
Also rename merge-file.[ch] to merge-blobs.[ch].
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script is not really exercising the remote-helper functionality,
but more the python framework for remote helpers that live in
git_remote_helpers.
It's also not a good example of how to write remote-helpers, unless you
are planning to use python, and even then you might not want to use this
framework.
So let's use a more appropriate name: git-remote-testpy.
A patch that replaces git-remote-testgit with a simpler version is on
the way.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You will get
$ make distclean 2>&1 | grep curl
/bin/sh: curl-config: not found
/bin/sh: curl-config: not found
/bin/sh: curl-config: not found
/bin/sh: curl-config: not found
/bin/sh: curl-config: not found
$
if you don't have a curl development package installed.
The intent is not to alarm the user, but just to test if there is
a new enough curl installed. However, if you look at search engine
suggested completions, the above "error" messages are confusing
people into thinking curl is a hard requirement.
Redirect this error output to /dev/null as it is not necessary to be
shown to the end users.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git compile on cygwin with newer header files.
* ml/cygwin-mingw-headers:
USE CGYWIN_V15_WIN32API as macro to select api for cygwin
Update cygwin.c for new mingw-64 win32 api headers
The previous macro was confusing to some, and did not include "cygwin" in
its name. The updated name more clearly expresses a choice of the
win32api implementation that shipped with version 1.5 of cygwin.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The cygwin project recently switched to a new implementation of the
windows api, now using header files from the mingw-64 project. These
new header files are incompatible with the way cygwin.c included the
old headers: cygwin.c can be compiled using the new or the older (mingw)
headers, but different files must be included in different order for each
to work. The new headers are in use only for the current release series
(based upon the v1.7.x dll version). The previous release series using
the v1.5 dll is kept available but unmaintained for use on older versions
of Windows. So, patch cygwin.c to use the new include ordering only if
the dll version is 1.7 or higher.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
This fixes the vast majority of test failures on HP NonStop.
Some test don't work with /bin/diff, some fail with /bin/tar,
so let's put /usr/local/bin in PATH first.
Some tests fail with /bin/sh (link to /bin/ksh) so use bash instead
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Jeff King <peff@peff.net>
fetch_pack() is used by transport.c, part of libgit.a while it stays
in builtin/fetch-pack.c. Move it to fetch-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
send_pack() is used by transport.c, part of libgit.a while it stays in
builtin/send-pack.c. Move it to send-pack.c so that we won't get
undefined reference if a program that uses libgit.a happens to pull it
in.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
These functions are called in sequencer.c, which is part of
libgit.a. This makes libgit.a potentially require builtin/merge.c for
external git commands.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
A GSoC project.
* fa/remote-svn:
Add a test script for remote-svn
remote-svn: add marks-file regeneration
Add a svnrdump-simulator replaying a dump file for testing
remote-svn: add incremental import
remote-svn: Activate import/export-marks for fast-import
Create a note for every imported commit containing svn metadata
vcs-svn: add fast_export_note to create notes
Allow reading svn dumps from files via file:// urls
remote-svn, vcs-svn: Enable fetching to private refs
When debug==1, start fast-import with "--stats" instead of "--quiet"
Add documentation for the 'bidi-import' capability of remote-helpers
Connect fast-import to the remote-helper via pipe, adding 'bidi-import' capability
Add argv_array_detach and argv_array_free_detached
Add svndump_init_fd to allow reading dumps from arbitrary FDs
Add git-remote-testsvn to Makefile
Implement a remote helper for svn in C
The malloc checks can be disabled using the TEST_NO_MALLOC_CHECK
variable, either from the environment or command line of an
'make test' invocation. In order to allow the malloc checks to be
disabled from the 'config.mak' file, we add TEST_NO_MALLOC_CHECK
to the environment using an export directive.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The link-rule is a copy of the standard git$X rule but adds VCSSVN_LIB.
Add executable to .gitignore.
Signed-off-by: Florian Achleitner <florian.achleitner.2.6.31@gmail.com>
Acked-by: David Michael Barr <b@rr-dav.id.au>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/poll-emu:
make poll() work on platforms that can't recv() on a non-socket
poll() exits too early with EFAULT if 1st arg is NULL
fix some win32 specific dependencies in poll.c
make poll available for other platforms lacking it
Includes the addition of some new defines and their description for others to use.
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/string-list:
api-string-list.txt: initialize the string_list the easy way
string_list: add a function string_list_longest_prefix()
string_list: add a new function, string_list_remove_duplicates()
string_list: add a new function, filter_string_list()
string_list: add two new functions for splitting strings
string_list: add function string_list_append_nodup()
move poll.[ch] out of compat/win32/ into compat/poll/ and adjust
Makefile with the changed paths. Adding comments to Makefile about
how/when to enable it and add logic for this
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touches to recently added wrapper for mkdir() that do not
want to see trailing slashes.
* js/compat-mkdir:
Document MKDIR_WO_TRAILING_SLASH in Makefile
Add two new functions, string_list_split() and
string_list_split_in_place(). These split a string into a string_list
on a separator character. The first makes copies of the substrings
(leaving the input string untouched) and the second splits the
original string in place, overwriting the separator characters with
NULs and referring to the original string's memory.
These functions are similar to the strbuf_split_*() functions except
that they work with the more powerful string_list interface.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git ships with a fall-back regexp implementation for platforms with
buggy regexp library; give people a tool to see if they should be
using it on their platform.
* rj/test-regex:
test-regex: Add a test to check for a bug in the regex routines
* jk/check-docs-update:
check-docs: get documented command list from Makefile
check-docs: drop git-help special-case
check-docs: list git-gui as a command
check-docs: factor out command-list
command-list: mention git-credential-* helpers
command-list: add git-sh-i18n
check-docs: update non-command documentation list
check-docs: mention gitweb specially
The current code uses setitimer() only for reducing perceived
latency. On platforms that lack setitimer() (e.g. HP NonStop),
allow builders to say "make NO_SETITIMER=YesPlease" to use a no-op
substitute, as doing so would not affect correctness.
HP NonStop does provide struct itimerval, but other platforms may
not, so this is taken care of in this commit too, by setting
NO_STRUCT_ITIMERVAL.
Signed-off-by: Joachim Schmitz <jojo@schmitz-digital.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify "make check-docs" implementation and update its coverage.
* jk/check-docs-update:
check-docs: get documented command list from Makefile
check-docs: drop git-help special-case
check-docs: list git-gui as a command
check-docs: factor out command-list
command-list: mention git-credential-* helpers
command-list: add git-sh-i18n
check-docs: update non-command documentation list
check-docs: mention gitweb specially
The recent update to terminal I/O interface to get passwords &c
interactively didn't quite work on Solaris.
* bw/maint-1.7.9-solaris-getpass:
Enable HAVE_DEV_TTY for Solaris
terminal: seek when switching between reading and writing
The current code tries to get a list of documented commands
by doing "ls Documentation/git*txt" and culling a bunch of
special cases from the result. Looking for "git-*.txt" would
be more accurate, but would miss a few commands like
"gitweb" and "gitk".
Fortunately, Documentation/Makefile already knows what this
list is, so we can just ask it. Annoyingly, we still have to
post-process its output a little, since make will print
extra cruft like "GIT-VERSION-FILE is up to date" to stdout.
Now that our list is accurate, we can remove all of the ugly
special-cases.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The check-docs target special-cases git-help to avoid
mentioning it as "documented but removed". This dates back
to the early implementation of git-help, when its code was
simply included inside git.c.
These days it is a full-fledged builtin (in builtin/help.c)
and does not need special-casing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
