This makes it possible to define WITH_SEND_EMAIL etc. in config.mak.
Also remove GIT_LIST_TWEAK because it isn't used anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would end up linking all the unneeded stuff into git-daemon
only to link with git_default_config.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove $(SIMPLE_PROGRAMS) from $(PROGRAMS) so buildrules don't have
to be overridden.
Put $(SCRIPTS) with the other target-macros so it doesn't get lonely.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also rearrange some path settings in the Makefile in the process.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is meant for the end user, who cannot be expected to edit
.git/config by hand.
Example:
git-config-set core.filemode true
will set filemode in the section [core] to true,
git-config-set --unset core.filemode
will remove the entry (failing if it is not there), and
git-config-set --unset diff.twohead ^recar
will remove the unique entry whose value matches the regex "^recar"
(failing if there is no unique such entry).
It is just a light wrapper around git_config_set() and
git_config_set_multivar().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The decision about whether to build http-push or not belongs in the
Makefile. This follows Junio's suggestion to determine whether curl
is new enough to support http-push.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Move shared HTTP request functionality out of http-fetch and http-push,
and replace the two fwrite_buffer/fwrite_buffer_dynamic functions with
one fwrite_buffer function that does dynamic buffering. Use slot
callbacks to process responses to fetch object transfer requests and
push transfer requests, and put all of http-push into an #ifdef check
for curl multi support.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When HPA added Cygwin target, it ran just fine without NO_MMAP for him,
but recently we are getting reports that for some people things break
without it. For now, just suggest it in the Makefile without actually
updating the default.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch provides a C implementation of the 'git' program and
introduces support for putting the git-* commands in a directory
of their own. It also saves some time on executing those commands
in a tight loop and it prints the currently available git commands
in a nicely formatted list.
The location of the GIT_EXEC_PATH (name discussion's closed, thank gods)
can be obtained by running
git --exec-path
which will hopefully give porcelainistas ample time to adapt their
heavy-duty loops to call the core programs directly and thus save
the extra fork() / execve() overhead, although that's not really
necessary any more.
The --exec-path value is prepended to $PATH, so the git-* programs
should Just Work without ever requiring any changes to how they call
other programs in the suite.
Some timing values for 10000 invocations of git-var >&/dev/null:
git.sh: 24.194s
git.c: 9.044s
git-var: 7.377s
The git-<tab><tab> behaviour can, along with the someday-to-be-deprecated
git-<command> form of invocation, be indefinitely retained by adding
the following line to one's .bash_profile or equivalent:
PATH=$PATH:$(git --exec-path)
Experimental libraries can be used by either setting the environment variable
GIT_EXEC_PATH, or by using
git --exec-path=/some/experimental/exec-path
Relative paths are properly grok'ed as exec-path values.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A while ago, a rename-detection limit logic was implemented as a
response to this thread:
http://marc.theaimsgroup.com/?l=git&m=112413080630175
where gitweb was found to be using a lot of time and memory to
detect renames on huge commits. git-diff family takes -l<num>
flag, and if the number of paths that are rename destination
candidates (i.e. new paths with -M, or modified paths with -C)
are larger than that number, skips rename/copy detection even
when -M or -C is specified on the command line.
This commit makes the rename detection limit easier to use. You
can have:
[diff]
renamelimit = 30
in your .git/config file to specify the default rename detection
limit. You can override this from the command line; giving 0
means 'unlimited':
git diff -M -l0
We might want to change the default behaviour, when you do not
have the configuration, to limit it to say 20 paths or so. This
would also help the diffstat generation after a big 'git pull'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames the tarball "git" rather than "git-core", and changes
the names of various packages from git-core-foo to git-foo. git-core is
still the true core package; an empty RPM package named "git" pulls in
ALL the git packages -- this makes updates work correctly, and allows
"yum install git" to do the obvious thing.
It also renames the git-(core-)tk package to gitk.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Stuffing -L flag and friends meant for the linking phase into
ALL_CFLAGS is not right; honor LDFLAGS and introduce ALL_LDFLAGS
to separate them out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because we use "lost-found" as the directory name to hold
dangling object names, it is confusing to call the command
git-lost+found, although it makes sense and is even cute ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is GIT 1.0-rc1 in disguise. It is plausible that
relatively new parts of the system still need tweaking and
fixing, but that is why it is not 1.0 but rc ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames git-pack-intersect to git-pack-redundant
as suggested by Petr Baudis. The new name reflects what the
program does, rather than how it does it.
Also fix a small argument parsing bug.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds the program git-pack-intersect. It is
used to find redundant packs in git repositories.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Another snapshot, as slow and steady marth towards 1.0 continues.
Major changes include:
- Jim Radford's RPM split.
- Fredrik's recursive merge strategy is now default for two heads merge.
- Yaacov's SVN importer updates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A script that can replay commits git into a CVS checkout. Tries to ensure the
sanity of the operation and supports mainly manual usage.
If you are reckless enough, you can ask it to autocommit when everything has
applied cleanly. Combined with a couple more scripts could become part of
a git2cvs gateway.
Should support adds/removes and binary files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There's no standard libexpat for OSX, so if you install it
after-market, it can end up in various directories. Give
paths used by fink and darwinports by default to CFLAGS.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add support for pushing to a remote repository using HTTP/DAV
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As discussed on the list, split the foreign SCM interoperability
packages and documentation from the git-core binary package.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I think the original intention was to make CFLAGS overridable
from the make command line, but somehow we ended up accumulating
conditional makefile sections that wrongly appends values to
CFLAGs. These assignments do not work when the user actually
override them from the make command line!
DEFINES are handled the same way; it was seemingly overridable,
but the makefile sections had assignments, which meant
overriding it from the command line broke things.
This simplifies things by limiting the internal futzing to
ALL_CFLAGS, and by removing DEFINES altogether. Overriding
CFLAGS from the command line should start working with this
change.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is primarily to include the 'git clone -l' (without -s) fix,
first spotted and diagnosed by Linus and caused James Bottomley's
repository to become unreadable. It also contains documentation
updates happened on the "master" branch since 0.99.9c
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the coolest merge strategy ever, "ours". It can take
arbitrary number of foreign heads and merge them into the
current branch, with the resulting tree always taken from our
branch head, hence its name.
What this means is that you can declare that the current branch
supersedes the development histories of other branches using
this merge strategy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't set a non-standard CURLDIR as default, and fix an error
in Solaris 10 by setting NEEDS_LIBICONV.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This contains the changes made on the master branch since 0.99.9a.
The workaround for building RPMs has not changed since 0.99.9a,
mainly because I haven't heard back if it was good enough for
kernel.org consumption, or otherwise what changes are needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a companion patch to 4f9dcf7e5c
which stops mentioning the old command names. As promised, we do not
install symlinks to let people use backward compatibility names anymore.
cmd-rename.sh script is still shipped to help people who installed
previous git by hand to clean up the leftover symlinks.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This script was superseded by git-name-rev, which is more versatile,
actually documented, faster, and everything else...
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Done in 0.99.9
==============
Ports
~~~~~
* Cygwin port [HPA].
* OpenBSD build [Merlyn and others].
Fixes
~~~~~
* clone request over git native protocol from a repository with
too many refs did not work; this has been fixed.
* git-daemon got safer for kernel.org use [HPA].
* Extended SHA1 parser was not enforcing uniqueness for
abbreviated SHA1; this has been fixed.
* http transport does not barf on funny characters in URL.
* The ref naming restrictions have been formalized and the
coreish refuses to create funny refs; we still need to audit
importers. See git-check-ref-format(1).
New Features and Commands
~~~~~~~~~~~~~~~~~~~~~~~~~
* .git/config file as a per-repository configuration mechanism,
and some commands understand it [Linus]. See
git(7).
* The core.filemode configuration item can be used to make us a
bit more FAT friendly. See git(7).
* The extended SHA1 notation acquired Peel-the-onion operator
^{type} and ^{}. See git-rev-parse(1).
* SVN importer [Matthias]. See git-svnimport(1).
* .git/objects/[0-9a-f]{2} directories are created on demand,
and removed when becomes empty after prune-packed [Linus].
* Filenames output from various commands without -z option are
quoted when they embed funny characters (TAB and LF) using
C-style quoting within double-quotes, to match the proposed
GNU diff/patch notation [me, but many people contributed in
the discussion].
* git-mv is expected to be a better replacement for git-rename.
While the latter has two parameter restriction, it acts more
like the regular 'mv' that can move multiple things to one
destinatino directory [Josef Weidendorfer].
* git-checkout can take filenames to revert the changes to
them. See git-checkout(1)
* The new program git-am is a replacement for git-applymbox that
has saner command line options and a bit easier to use when a
patch does not apply cleanly.
* git-ls-remote can show unwrapped onions using ^{} notation, to
help Cogito to track tags.
* git-merge-recursive backend can merge unrelated projects.
* git-clone over native transport leaves the result packed.
* git-http-fetch issues multiple requests in parallel when
underlying cURL library supports it [Nick and Daniel].
* git-fetch-pack and git-upload-pack try harder to figure out
better common commits [Johannes].
* git-read-tree -u removes a directory when it makes it empty.
* git-diff-* records abbreviated SHA1 names of original and
resulting blob; this sometimes helps to apply otherwise an
unapplicable patch by falling back to 3-way merge.
* git-format-patch now takes series of from..to rev ranges and
with '-m --stdout', writes them out to the standard output.
This can be piped to 'git-am' to implement cheaper
cherry-picking.
* git-tag takes '-u' to specify the tag signer identity [Linus].
* git-rev-list can take optional pathspecs to skip commits that
do not touch them (--dense) [Linus].
* Comes with new and improved gitk [Paulus and Linus].
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-name-rev tries to find nice symbolic names for commits. It does so by
walking the commits from the refs. When the symbolic name is ambiguous, the
following heuristic is applied: Try to avoid too many ~'s, and if two ambiguous
names have the same count of ~'s, take the one whose last number is smaller.
With "--tags", the names are derived only from tags.
With "--stdin", the stdin is parsed, and after every sha1 for which a name
could be found, the name is appended. (Try "git log | git name-rev --stdin".)
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-pack-objects can reuse pack files stored in $GIT_DIR/pack-cache
directory, when a necessary pack is found. This is hopefully useful
when upload-pack (called from git-daemon) is expected to receive
requests for the same set of objects many times (e.g full cloning
request of any project, or updates from the set of heads previous day
to the latest for a slow moving project).
Currently git-pack-objects does *not* keep pack files it creates for
reusing. It might be useful to add --update-cache option to it,
which would allow it store pack files it created in the pack-cache
directory, and prune rarely used ones from it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a very git specific restricted shell, that can be
added to /etc/shells and set to the pw_shell in the /etc/passwd
file, to give users ability to push into repositories over ssh
without giving them full interactive shell acount.
[jc: I updated Linus' patch to match what the current sq_quote()
does.]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It supersedes git-rename by adding functionality to move multiple
files, directories or symlinks into another directory. It also
provides according documentation.
The implementation renames multiple files, using the arguments from
the command line to produce an array of sources and destinations. In
a first pass, all requested renames are checked for errors, and
overwriting of existing files is only allowed with '-f'. The actual
renaming is done in a second pass. This ensures that any error
condition is checked before anything is changed.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes the tree diff functionality independent of the "git-diff-tree"
program, by splitting the core functionality up into a library file.
This will be needed for when we teach git-rev-list to only follow a
specified set of pathnames, rather than the global revision history.
Most of it is a fairly straightforward code move, but it also involves
some calling convention cleanup, and moving some of the static variables
from diff-tree.c into the options structure.
The actual tree change callback routines also become paramterized by the
diff_options structure, allowing the library functionality to do something
else than just show the diff on stdout.
Right now the only user of this functionality remains git-diff-tree
itself.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since git-cherry-pick is simply a copy of git-revert, it can be created
before installing (so that it can be used without installing, too).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Yes I said 0.99.8e was the last maintenance release for 0.99.8, but it
turns out that there was another backport necessary after git-daemon
was unleashed on kernel.org servers.
Contains the following since 0.99.8e:
H. Peter Anvin:
revised^2: git-daemon extra paranoia, and path DWIM
Johannes Schindelin:
Fix cvsimport warning when called without --no-cvs-direct
Junio C Hamano:
Do not ask for objects known to be complete.
Linus Torvalds:
git-fetch-pack: avoid unnecessary zero packing
Optimize common case of git-rev-list
Signed-off-by: Junio C Hamano <junkio@cox.net>
Linus Torvalds:
make checkout-index '-a' flag saner.
Junio C Hamano:
whatchanged: document -m option from git-diff-tree.
Functions to quote and unquote pathnames in C-style.
Update git-apply to use C-style quoting for funny pathnames.
Do not quote SP.
git-checkout-index: documentation updates.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Contains the following changes since v0.99.8c.
Johannes Schindelin:
Teach git-status about spaces in file names also on MacOSX
t5400-send-pack relies on a working cpio
Jonas Fonseca:
git.sh: quote all paths
Junio C Hamano:
Also force LC_ALL in test scripts.
OpenBSD needs the strcasestr replacement.
git-check-ref-format: reject funny ref names.
Refuse to create funny refs in clone-pack, git-fetch and receive-pack.
Ignore funny refname sent from remote
Introduce notation "ref^{type}".
Martin Langhoff:
cvsimport: don't pass --cvs-direct if user options contradict us
Ralf Baechle:
rsh.c: typo fix
Note that "funny ref" bits are not strictly fixes but rather
backport from the "master" branch. They will prevent refs and
heads with funny names from being created. In addition, what is
in the master branch will start feeding the clients unwrapped
tag information to help Martin's findtags and possibly later
Cogito. These backported "funny ref" changes are to prevent
clients on the "maint" branch from getting confused when talking
with newer git-upload-pack and when reading from info/refs file
prepared with newer git-update-server-info.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update check_ref_format() function to reject ref names that:
* has a path component that begins with a ".", or
* has a double dots "..", or
* has ASCII control character, "~", "^", ":" or SP, anywhere, or
* ends with a "/".
Use it in 'git-checkout -b', 'git-branch', and 'git-tag' to make sure
that newly created refs are well-formed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update check_ref_format() function to reject ref names that:
* has a path component that begins with a ".", or
* has a double dots "..", or
* has ASCII control character, "~", "^", ":" or SP, anywhere, or
* ends with a "/".
Use it in 'git-checkout -b', 'git-branch', and 'git-tag' to make sure
that newly created refs are well-formed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do our own ctype.h, just to get the sane semantics: we want
locale-independence, _and_ we want the right signed behaviour. Plus we
only use a very small subset of ctype.h anyway (isspace, isalpha,
isdigit and isalnum).
Signed-off-by: Junio C Hamano <junkio@cox.net>
A short perl script that will walk the tag refs, tag objects, and even commit
objects in its quest to figure out whether the given SHA1 (for a commit or
tree) was ever tagged.
This version is reworked incorporating sanity, feature and style fixes from
Junio.
Usage: git-findtags.perl [ -t ] <commit-or-tree-sha1>
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-index-pack builds a pack index file for an existing packed
archive. With this utility a packed archive which was transferred
without the corresponding pack index can be added to objects/pack/
without repacking.
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This starts using the "user.name" and "user.email" config variables if
they exist as the default name and email when committing. This means
that you don't have to use the GIT_COMMITTER_EMAIL environment variable
to override your email - you can just edit the config file instead.
The patch looks bigger than it is because it makes the default name and
email information non-static and renames it appropriately. And it moves
the common git environment variables into a new library file, so that
you can link against libgit.a and get the git environment without having
to link in zlib and libcrypt.
In short, most of it is renaming and moving, the real change core is
just a few new lines in "git_default_config()" that copies the user
config values to the new base.
It also changes "git-var -l" to list the config variables.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If somebody set template_dir in config.mak. Then git-init-db would be
compiled with the correct location but the templates would be installed
in the default location. Fix it.
Signed-off-by: Tom Prince <tom.prince@ualberta.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this patch, it is possible to store configuration options like
NO_CURL=YesPlease or NO_OPENSSL=YesPlease into a file named
config.mak, which will be included in the Makefile.
[jc: redone with suggestion from Daniel Barkalow to just use -include]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a first cut at a very simple parser for a git config file.
The format of the file is a simple ini-file like thing, with simple
variable/value pairs. You can (and should) make the variables have a
simple single-level scope, ie a valid file looks something like this:
#
# This is the config file, and
# a '#' or ';' character indicates
# a comment
#
; core variables
[core]
; Don't trust file modes
filemode = false
; Our diff algorithm
[diff]
external = "/usr/local/bin/gnu-diff -u"
renames = true
which parses into three variables: "core.filemode" is associated with the
string "false", and "diff.external" gets the appropriate quoted value.
Right now we only react to one variable: "core.filemode" is a boolean that
decides if we should care about the 0100 (user-execute) bit of the stat
information. Even that is just a parsing demonstration - this doesn't
actually implement that st_mode compare logic itself.
Different programs can react to different config options, although they
should always fall back to calling "git_default_config()" on any config
option name that they don't recognize.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As the name suggests, this script imports from SVN.
Only "normal" SVN repositories (with single trunk/, branches/, and tags/
subdrectories) are supported. Incremental imports require preserving
the file .git/svn2git.
Signed-Off-by: Matthias Urlichs <smurf@smurf.noris.de>
The platform specific tweaking part was using 'uname -o' which
is not always available. Squelch error message from it.
It was suggested to chain the if..else, but I chose not to, because
maintaining the nested if..else if..else..endif endif to match is a
pain. If we had "elif", things would have been different, though.
While we are at it, try not to invoke 'uname -s' for each platform
candidate.
Signed-off-by: Junio C Hamano <junkio@cox.net>
exports $prefix and makes Documentation/Makefile following it also.
Signed-off-by: Kai Ruemmler <kai.ruemmler@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since some platforms do not support mmap() at all, and others do only just
so, this patch introduces the option to fake mmap() and munmap() by
malloc()ing and read()ing explicitely.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Borrow from NO_MMAP patch by Johannes, squelch compiler warnings by
declaring gitstrcasestr() when we use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It reorganizes the code and also has saner command line options
syntax. Unlike git-applymbox, it can take more than one mailbox
file from the command line, as well as reading from the standard
input when '-' is specified.
Signed-off-by: Junio C Hamano <junkio@cox.net>
H. Peter Anvin says that Samba "promotes" symlinks to hardlinks while
Cygwin itself uses .lnk files to emulate symlinks. Avoid using symbolic
link for .git/HEAD on Cygwin.
This does not help the symlinks recorded in trees as user data, but
at least we do not use them for our own bookkeeping.
Signed-off-by: Junio C Hamano <junkio@cox.net>
GIT already did everything I wanted it to do since mid 0.99.7,
and it has almost everything I want it to have now, except a
couple of minor tweaks and enhancements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the platform lacks certain git subcommands, omit them from the
list of subcommands that are available from "git" wrapper.
Noticed by Geert Bosch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- The location of openssl development files got customizable.
- The location of iconv development files got customizable.
- Pass $TAR down to t5000 test so that the user can override with
'gmake TAR=gtar'.
- Solaris 'bc' does not seem to grok "define abs()". There is no
reason to use bc there -- expr would do.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
This adds the counterpart of git-update-ref that lets you read
and create "symbolic refs". By default it uses a symbolic link
to represent ".git/HEAD -> refs/heads/master", but it can be compiled
to use the textfile symbolic ref.
The places that did 'readlink .git/HEAD' and 'ln -s refs/heads/blah
.git/HEAD' have been converted to use new git-symbolic-ref command, so
that they can deal with either implementation.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
After seeing Jeff's guide, I changed my mind about the
big-rename transition plan. Even if Porcelains are kept up to
date, those web documents that describes older world order would
live longer and people will stumble across them via google
searches. And who knows how many mirrored copies there are.
The backward compatible symbolic links *will* be removed before
1.0. But that will not happen in 0.99.8.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a careful version of the script stuff that currently just
blindly writes HEAD with a new value.
You can use
git-update-ref HEAD <newhead>
or
git-update-ref HEAD <newhead> <oldhead>
where the latter version verifies that the old value of HEAD matches
oldhead.
It basically allows a "ref" file to be a symbolic pointer to another ref
file by starting with the four-byte header sequence of "ref:".
More importantly, it allows the update of a ref file to follow these
symbolic pointers, whether they are symlinks or these "regular file
symbolic refs".
NOTE! It follows _real_ symlinks only if they start with "refs/":
otherwise it will just try to read them and update them as a regular file
(ie it will allow the filesystem to follow them, but will overwrite such a
symlink to somewhere else with a regular filename).
In general, using
git-update-ref HEAD "$head"
should be a _lot_ safer than doing
echo "$head" > "$GIT_DIR/HEAD"
both from a symlink following standpoint _and_ an error checking
standpoint. The "refs/" rule for symlinks means that symlinks that point
to "outside" the tree are safe: they'll be followed for reading but not
for writing (so we'll never write through a ref symlink to some other
tree, if you have copied a whole archive by creating a symlink tree).
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we conditionally compile things in compat/, so we should remove
object files there. Python execution can leave *.pyc and *.pyo, which
need to be cleaned as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also cmd-renames.sh can now be used to remove the backward compatible
symlinks -- this is not used by default in any way.
As discussed on the list with Pasky, git-ssh-push and git-ssh-pull will
keep calling each other for a while longer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Pasky taught me how he does his versioning for ELinks. This will sort
after 0.99.7 and interim fixes 0.99.7a, and before 0.99.8.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Contains the following post-0.99.7b fixes:
- rsh.c string termination fix by H. Peter Anvin
- further fetch fixes by Sergey Vlasov
- diff-tree documentation by Robert Watson.
- 'git diff --cached' synonymous to 'git diff --cached HEAD'.
- subprocess.py licensing status clarification.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Taking the make command line Peter Eriksen uses, give defaults
to SHELL_PATH, TAR, CURLDIR, NO_STRCASESTR, and INSTALL.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Support systems that do not install curl headers and libraries
in /usr/{include,lib}.
Signed-off-by: Patrick Mauritz <oxygene@studentenbude.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Including the current branch in the list of heads being merged
was not a good idea, so drop it. And shorten the message by
grouping branches and tags together to form a single line.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The textual diff generation with built-in '-p' in diff-* brothers has
proven to be useful enough that git-diff-helper outlived its usefulness.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some old scripts might still use git-rev-tree, but it really is
clearly inferior in every way to git-rev-list that such scripts should
be fixed anyway. Fixing them should be pretty easy.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-export was done as a concept example on how easy it is to export
the git data to something else. It's much less powerful than any
number of trivial one-liner scripts now, and real exporters would not
ever use git-export.
It's obviously much less powerful than "git-whatchanged", or just
about any combination of git-rev-list + git-diff-tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is my ARM assembly SHA1 implementation for GIT. It is approximately
50% faster than the generic C version. On an XScale processor running at
400MHz:
generic C version: 9.8 MB/s
my version: 14.5 MB/s
It's not that I expect a lot of big GIT users on ARM, but I stillknow
about one important ARM user that might benefit from it, and writing
that code was fun.
I also reworked the makefile a bit so any optimized SHA1 implementations
is used regardless of whether NO_OPENSSL is defined or not.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some C libraries lack strcasestr(); add a stupid replacement
to help folks with such.
[jc: original Linus posting, updated with his "also need <ctype.h>",
updated further with a fix from Joachim B Haga <cjhaga@fys.uio.no>"]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Jason Riedy suggests that we should be able to use getdomainname
if we properly specify which libraries to link.
Signed-off-by: Junio C Hamano <junkio@cox.net>
HPA reminded me that these programs knows about the name of the
counterpart on the other end and simply symlinking the old name to
new name locally would not be enough.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... in order to please Solaris 'install'. GNU install is not harmed
with this.
[jc: Documentation/Makefile also fixed.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we would regret when Fredrik comes up with another merge
algorithm with different pros-and-cons with the current one.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Very convenient shorthand for
git-ls-files [file-patterns] | xargs grep <pattern>
which I tend to do all the time.
Yes, it's trivial, but it's really nice. I can do
git grep '\<some_variable\>' arch/i386 include/asm-i386
and it does exactly what you'd think it does. And since it just uses the
normal git-ls-files file patterns, you can do things like
git grep something 'include/*.h'
and it will search all header files under the include/ subdirectory.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I really wanted to try this out, instead of asking for an adjustment
to the 'git merge' driver and waiting. For now the new strategy is
called 'fredrik' and not in the list of default strategies to be tried.
The script wants Python 2.4 so this commit also adjusts Debian and RPM
build procecure files.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The new command 'git merge' takes the current head and one or more
remote heads, with the commit log message for the automated case.
If the heads being merged are simple fast-forwards, it acts the
same way as the current 'git resolve'. Otherwise, it tries
different merge strategies and takes the result from the one that
succeeded auto-merging, if there is any.
If no merge strategy succeeds auto-merging, their results are
evaluated for number of paths needed for hand resolving, and the
one with the least number of such paths is left in the working
tree. The user is asked to resolve them by hand and make a
commit manually.
The calling convention from the 'git merge' driver to merge
strategy programs is very simple:
- A strategy program is to be called 'git-merge-<strategy>'.
- They take input of this form:
<common1> <common2> ... '--' <head> <remote1> <remote2>...
That is, one or more the common ancestors, double dash, the
current head, and one or more remote heads being merged into
the current branch.
- Before a strategy program is called, the working tree is
matched to the current <head>.
- The strategy program exits with status code 0 when it
successfully auto-merges the given heads. It should do
update-cache for all the merged paths when it does so -- the
index file will be used to record the merge result as a
commit by the driver.
- The strategy program exits with status code 1 when it leaves
conflicts behind. It should do update-cache for all the
merged paths that it successfully auto-merged, and leave the
cache entry in the index file as the same as <head> for paths
it could not auto-merge, and leave its best-effort result
with conflict markers in the working tree when it does so.
- The strategy program exists with status code other than 0 or
1 if it does not handle the given merge at all.
As examples, this commit comes with merge strategies based on
'git resolve' and 'git octopus'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have deprecated the old environment variable names for quite a
while and now it's time to remove them. Gone are:
SHA1_FILE_DIRECTORIES AUTHOR_DATE AUTHOR_EMAIL AUTHOR_NAME
COMMIT_AUTHOR_EMAIL COMMIT_AUTHOR_NAME SHA1_FILE_DIRECTORY
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove duplicate git-send-email-perl target in Makefile.
When WITH_SEND_EMAIL was defined, as in the Debian 'deb' target,
git-send-email-perl was added twice to SCRIPT_PERL, leading to a
duplicate definition in the Makefile. Creating a ".deb" then failed.
Signed-off-by: Marco Roeland <marco.roeland@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier we renamed git-foo.sh to git-foo while installing, which
was mostly done by inertia than anything else. This however
made writing tests to use scripts harder.
This patch builds the scripts the same way as we build binaries
from their sources. As a side effect, you can now specify
non-standard paths you have your Perl binary is in when running
the make.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* getdomainname unavailable there.
* needs -lsocket for linkage.
* needs __EXTENSIONS__ at the beginning of convert-objects.c
[JC: I've done this slightly differently from what Patrick originally
sent to the list and dropped the bit that deals with installations
that has curl header and library at non-default location. I am
resisting the slipperly slope called autoconf.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also make platform specific part more isolated. Currently we only
have Darwin defined, but I've taken a look at SunOS specific patch
(which I dropped on the floor for now) as well. Doing things this way
would make adding it easier.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now the rebase is rewritten to use git cherry-pick, there is no user
for that ancient script. I've checked Cogito and StGIT to make sure
they do not use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The reverse patch application using "git apply" sometimes is too
rigid. Since the user would get used to resolving conflicting merges
by hand during the normal merge experience, using the same machinery
would be more helpful rather than just giving up.
Cherry-picking and reverting are essentially the same operation.
You pick one commit, and apply the difference that commit introduces
to its own commit ancestry chain to the current tree. Revert applies
the diff in reverse while cherry-pick applies it forward. They share
the same logic, just different messages and merge direction.
Rewrite "git rebase" using "git cherry-pick".
Signed-off-by: Junio C Hamano <junkio@cox.net>
You can define WITH_SEND_EMAIL to include the send-email command as
part of the installation. Since Debian, unlike RPM/Fedora, has the
two necessary Perl modules available as part of the mainline
distribution, there is no reason for us to shy away from shipping
send-email.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This script uses the list of heads and their origin multi-head "git
fetch" left in the $GIT_DIR/FETCH_HEAD file, and makes an octopus
merge on top of the current HEAD using them.
The implementation tries to be strict for the sake of safety. It
insists that your working tree is clean (no local changes) and matches
the HEAD, and when any of the merged heads does not automerge, the
whole process is aborted and tries to rewind your working tree is to
the original state.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update git-pull to match updated git-fetch and allow pull to
fetch from multiple remote references. There is no support for
resolving more than two heads, which will be done with "git
octopus".
Update "git ls-remote" to use git-parse-remote-script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When showing only one branch a lot of default output becomes redundant,
so clean it up a bit, and document what is shown. Retire the earlier
implementation "git-show-branches-script".
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'git show-branches' command turns out to be reasonably useful,
but painfully slow. So rewrite it in C, using ideas from merge-base
while enhancing it a bit more.
- Unlike show-branches, it can take --heads (show me all my
heads), --tags (show me all my tags), or --all (both).
- It can take --more=<number> to show beyond the merge-base.
- It shows the short name for each commit in the extended SHA1
syntax.
- It can find merge-base for more than two heads.
Examples:
$ git show-branch --more=6 HEAD
is almost the same as "git log --pretty=oneline --max-count=6".
$ git show-branch --merge-base master mhf misc
finds the merge base of the three given heads.
$ git show-branch master mhf misc
shows logs from the top of these three branch heads, up to their
common ancestor commit is shown.
$ git show-branch --all --more=10
is poor-man's gitk, showing all the tags and heads, and
going back 10 commits beyond the merge base of those refs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We always show the diff as an absolute path, but pathnames to diff are
taken relative to the current working directory (and if no pathnames are
given, the default ends up being all of the current working directory).
Note that "../xyz" also works, so you can do
cd linux/drivers/char
git diff ../block
and it will generate a diff of the linux/drivers/block changes.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Often I find myself wanting to do quick branches check when I am
not in the windowing environment and cannot run gitk.
This stupid script shows commits leading to the heads of
interesting branches with indication which ones belong to which
branches, so that fork point is somewhat discernible without
using gitk.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Tools directory being separate is just a historical
coincidence. Build and install together with the main
directory, just like the clean target does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use <tab> instead of two spaces uniformly in the Makefile, even in the
ifdefs. Gives it a nice consistent look.
[jc: At the same time I indented the nested ifdefs to make them
slightly easier to read.]
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$DESTDIR is more usual during the build than $dest and is what
is usually used in the makefiles, so let's use it too.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch renames COPTS to CFLAGS, because it's COPTS that was user
overridable. Also, -Wall is moved there because it's optional. What
was CFLAGS is now ALL_CFLAGS, which users should not override.
Defines are added to DEFINES. Since ALL_CFLAGS is recursively expanded,
it uses the final value of DEFINES.
Implicit rules are made explicit since the implicit rules use CFLAGS
rather than ALL_CFLAGS. I believe that serious projects should not rely
on implicit rules anyway. Percent rules are used because they are used
already and because they don't need the .SUFFIXES target.
[jc: in addition to updating the patch for 0.99.4, I fixed up a
glitch in Pavel's original patch which compiled sha1.o out of
mozilla-sha1/sha1.c, where it should have left the resulting
object file in mozilla-sha1 directory for later "ar".]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Given one existing commit, revert the change the patch
introduces, and record a new commit that records it. This
requires your working tree to be clean (no modifications from
the HEAD commit).
This is based on what Linus posted to the list, with
enhancements he suggested, including the use of -M to attempt
reverting renames.
Signed-off-by: Junio C Hamano <junkio@cox.net>
RPM folks have problem installing the package otherwise. Since
its usefulness does have much to do with GIT, downgrade it to
"contrib" status for now. We may want to move it to contrib/
subdirectory after auditing other programs when we reorganize
the source tree.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Run install-tools target to install the tools to accept e-mail
patches. Also clean up the main Makefile a bit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is my first attempt to adjust Debian and RPM to pass
prefix, to prepare the 0.99.4 release.
It updates debian/rules and git-core.spec.in to properly pass
prefix when building binary packages. It also updates
debian/changelog to make the resulting binary package name
0.99.4; this is not needed on the RPM side (it takes the version
number from the main Makefile).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Per discussion with people interested in binary packaging,
change the default template location from /etc/git-core to
/usr/share/git-core hierarchy. If a user wants to run git
before installing for whatever reason, in addition to adding
$src to the PATH environment variable, git-init-db can be run
with --template=$src/templates/blt/ parameter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Everybody envies rev-parse, who is the only one that can grok
the extended sha1 format. Move the get_extended_sha1() out of
rev-parse, rename it to get_sha1() and make it available to
everybody else.
The one I posted earlier to the list had one bug where it did
not handle a name that ends with a digit correctly (it
incorrectly tried the "Nth parent" path). This commit fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The king penguin said:
It has no point any more, all the tools check the file
status on their own, and yes, the thing should probably be
removed.
and the faithful servant makes it so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A template mechanism to populate newly initialized repository
with default set of files is introduced. Use it to ship example
hooks that can be used for update and post update checks, as
Josef Weidendorfer suggests.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is based off of GregKH's script, send-lots-of-email.pl, and strives to do
all the nice things a good subsystem maintainer does when forwarding a patch or
50 upstream:
All the prior handlers of the patch, as determined by the
Signed-off-by: lines, and/or the author of the commit, are cc:ed on the
email.
All emails are sent as a reply to the previous email, making it easy to
skip a collection of emails that are uninteresting.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Things have slowly but surely started to settle down, and the
http transport finally can natively grok packed repositories.
To give Pasky a good anchor point, hoping that he can start
split off the core part from Cogito, here is the 0.99.3, which
will be accompanied with its own tag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just before updating a ref,
$GIT_DIR/hooks/update refname old-sha1 new-sha1
is called if executable. The hook can decline the ref to be
updated by exiting with a non-zero status, or allow it to be
updated by exiting with a zero status. The mechanism also
allows e.g sending of a mail with pushed commits on the remote
repository.
Documentation update with an example hook is included.
jc: The credits of the basic idea and initial implementation go
to Josef, but I ended up rewriting major parts of his patch, so
bugs are all mine. Also I changed the semantics for the hook
from his original version (which were post-update hook) so that
the hook can optionally decline to update the ref, and also can
be used to implement the overall cleanups. The latter was
primarily to implement a suggestion from Linus that calling
update-server-info should be made optional.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This counts the number of unpacked object files and disk space
consumed by them, to help you decide when it is a good time to
repack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Implement fetching from a packed repository over http/https
using the dumb server support files.
I consider some parts of the logic should be in a separate C
program, but it appears to work with my simple tests. I have
backburnered it for a bit too long for my liking, so let's throw
it out in the open and see what happens.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch implements Linus' idea that if you are not interested in
pulling by HTTP, you can now say
NO_CURL=1 make
to compile everything except git-http-pull (thus not needing curl at all).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a new "git bisect" command.
- "git bisect start"
start bisection search.
- "git bisect bad <rev>"
mark some version known-bad (if no arguments, then current HEAD)
- "git bisect good <revs>..."
mark some versions known-good (if no arguments, then current HEAD)
- "git bisect reset <branch>"
done with bisection search and go back to your work (if
no arguments, then "master").
The way you use it is:
git bisect start
git bisect bad # Current version is bad
git bisect good v2.6.13-rc2 # v2.6.13-rc2 was the last version
# tested that was good
When you give at least one bad and one good versions, it will
bisect the revision tree and say something like:
Bisecting: 675 revisions left to test after this
and check out the state in the middle. Now, compile that kernel, and boot
it. Now, let's say that this booted kernel works fine, then just do
git bisect good # this one is good
which will now say
Bisecting: 337 revisions left to test after this
and you continue along, compiling that one, testing it, and depending on
whether it is good or bad, you say "git bisect good" or "git bisect bad",
and ask for the next bisection.
Until you have no more left, and you'll have been left with the first bad
kernel rev in "refs/bisect/bad".
Oh, and then after you want to reset to the original head, do a
git bisect reset
to get back to the master branch, instead of being in one of the bisection
branches ("git bisect start" will do that for you too, actually: it will
reset the bisection state, and before it does that it checks that you're
not using some old bisection branch).
Not really any harder than doing series of "quilt push" and "quilt pop",
now is it?
[jc: This patch is a rework based on what Linus posted to the
list. The changes are:
- The original introduced four separate commands, which was
three too many, so I merged them into one with subcommands.
- Since the next thing you would want to do after telling it
"bad" and "good" is always to bisect, this version does it
automatically for you.
- I think the termination condition was wrong. The original
version checked if the set of revisions reachable from next
bisection but not rechable from any of the known good ones
is empty, but if the current bisection was a bad one, this
would not terminate, so I changed it to terminate it when
the set becomes a singleton or empty.
- Removed the use of shell array variable.
]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Separate the process of building the commands to compilation and
linkage. This makes it more consistent with the library objects, is the
traditional thing to do, and significantly speeds up the subsequent
rebuilds, especially for us the people who develop git on 300MHz
notebooks.
Ported from Cogito.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Support for completely OpenSSL-less builds. FSF considers distributing GPL
binaries with OpenSSL linked in as a legal problem so this is trouble
e.g. for Debian, or some people might not want to install OpenSSL
anyway. If you
make NO_OPENSSL=1
you get completely OpenSSL-less build, disabling --merge-order and using
Mozilla's SHA1 implementation.
Ported from Cogito.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The Makefile rules were massively reordered so that they are actually
logically grouped now. Captions were added to separate the sections. No
rule contents was touched during the process.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove about one gazillion of explicit dependency rules with few lines
describing the general dependency pattern and then the exceptions. This
noticably shortens the Makefile and makes it easier to touch it.
This is part of the Cogito Makefile changes port.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Describe variables which make itself takes and adjusts compilation
accordingly (MOZILLA_SHA1, NO_OPENSSL, PPC_SHA1), and make adding
defines more convenient through the $DEFINES variable. $COPTS includes
-g as well now and is not overriden if it was already declared in the
environment. Also, $CFLAGS is appended to rather than reset, so that if
there was already a $CFLAGS environment variable, it's appended to. Some
more variables are also made overridable through the environment. Renamed
$bin to $bindir which is the name commonly used for this.
This is part of the Cogito Makefile changes port.
Signed-off-by: Petr Baudis <pasky@ucw.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On older Mac OS X (10.2.8), no socklen_t is defined, and therefore
daemon.c does not compile. However, Mac OS X 10.4 seems to define
socklen_t differently.
Also, linking fails due to some symbols defined in libssl (not just
libcrypto).
[jc: I am tentatively dropping the socklen_t part of the patch
because I am waiting for confirmation on the server side IPV6
patch from Yoshifuji-san]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
