When receive-pack & fetch-pack are run and store the pack obtained over
the wire to a local repository, they internally run the index-pack command
with the --strict option. Make sure that we reject incoming packfile that
records objects twice to avoid spreading such a damage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/index-pack:
verify-pack: use index-pack --verify
index-pack: show histogram when emulating "verify-pack -v"
index-pack: start learning to emulate "verify-pack -v"
index-pack: a miniscule refactor
index-pack --verify: read anomalous offsets from v2 idx file
write_idx_file: need_large_offset() helper function
index-pack: --verify
write_idx_file: introduce a struct to hold idx customization options
index-pack: group the delta-base array entries also by type
Conflicts:
builtin/verify-pack.c
cache.h
sha1_file.c
* jc/zlib-wrap:
zlib: allow feeding more than 4GB in one go
zlib: zlib can only process 4GB at a time
zlib: wrap deflateBound() too
zlib: wrap deflate side of the API
zlib: wrap inflateInit2 used to accept only for gzip format
zlib: wrap remaining calls to direct inflate/inflateEnd
zlib wrapper: refactor error message formatter
Conflicts:
sha1_file.c
The size of objects we read from the repository and data we try to put
into the repository are represented in "unsigned long", so that on larger
architectures we can handle objects that weigh more than 4GB.
But the interface defined in zlib.h to communicate with inflate/deflate
limits avail_in (how many bytes of input are we calling zlib with) and
avail_out (how many bytes of output from zlib are we ready to accept)
fields effectively to 4GB by defining their type to be uInt.
In many places in our code, we allocate a large buffer (e.g. mmap'ing a
large loose object file) and tell zlib its size by assigning the size to
avail_in field of the stream, but that will truncate the high octets of
the real size. The worst part of this story is that we often pass around
z_stream (the state object used by zlib) to keep track of the number of
used bytes in input/output buffer by inspecting these two fields, which
practically limits our callchain to the same 4GB limit.
Wrap z_stream in another structure git_zstream that can express avail_in
and avail_out in unsigned long. For now, just die() when the caller gives
a size that cannot be given to a single zlib call. In later patches in the
series, we would make git_inflate() and git_deflate() internally loop to
give callers an illusion that our "improved" version of zlib interface can
operate on a buffer larger than 4GB in one go.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Wrap deflateInit, deflate, and deflateEnd for everybody, and the sole use
of deflateInit2 in remote-curl.c to tell the library to use gzip header
and trailer in git_deflate_init_gzip().
There is only one caller that cares about the status from deflateEnd().
Introduce git_deflate_end_gently() to let that sole caller retrieve the
status and act on it (i.e. die) for now, but we would probably want to
make inflate_end/deflate_end die when they ran out of memory and get
rid of the _gently() kind.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The histogram produced by "verify-pack -v" always had an artificial
limit of 50, but index-pack knows what the maximum delta depth is, so
we do not have to limit it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "index-pack" machinery already has almost enough knowledge to produce
the same output as "verify-pack -v". Fill small gaps in its bookkeeping,
and teach it to show what it knows.
Add a few more command line options that do not have to be advertised to
the end users. They will be used internally when verify-pack calls this.
The eventual goal is to remove verify-pack implementation and redo it as a
thin wrapper around the index-pack, so that we can remove the rather
expensive packed_object_info_detail() API.
This still does not do the delta-chain-depth histogram yet but that part
is easy.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Introduce a helper function that takes the type of an object and
tell if it is a delta, as we seem to use this check in many places.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* load_file() returns a void pointer but is using 0 for the return
value
* builtin/receive-pack.c forgot to include builtin.h
* packet_trace_prefix can be marked static
* ll_merge takes a pointer for its last argument, not an int
* crc32 expects a pointer as the second argument but Z_NULL is defined
to be 0 (see 38f4d13 sparse fix: Using plain integer as NULL pointer,
2006-11-18 for more info)
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix warnings from 'make check'.
- These files don't include 'builtin.h' causing sparse to complain that
cmd_* isn't declared:
builtin/clone.c:364, builtin/fetch-pack.c:797,
builtin/fmt-merge-msg.c:34, builtin/hash-object.c:78,
builtin/merge-index.c:69, builtin/merge-recursive.c:22
builtin/merge-tree.c:341, builtin/mktag.c:156, builtin/notes.c:426
builtin/notes.c:822, builtin/pack-redundant.c:596,
builtin/pack-refs.c:10, builtin/patch-id.c:60, builtin/patch-id.c:149,
builtin/remote.c:1512, builtin/remote-ext.c:240,
builtin/remote-fd.c:53, builtin/reset.c:236, builtin/send-pack.c:384,
builtin/unpack-file.c:25, builtin/var.c:75
- These files have symbols which should be marked static since they're
only file scope:
submodule.c:12, diff.c:631, replace_object.c:92, submodule.c:13,
submodule.c:14, trace.c:78, transport.c:195, transport-helper.c:79,
unpack-trees.c:19, url.c:3, url.c:18, url.c:104, url.c:117, url.c:123,
url.c:129, url.c:136, thread-utils.c:21, thread-utils.c:48
- These files redeclare symbols to be different types:
builtin/index-pack.c:210, parse-options.c:564, parse-options.c:571,
usage.c:49, usage.c:58, usage.c:63, usage.c:72
- These files use a literal integer 0 when they really should use a NULL
pointer:
daemon.c:663, fast-import.c:2942, imap-send.c:1072, notes-merge.c:362
While we're in the area, clean up some unused #includes in builtin files
(mostly exec_cmd.h).
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a struct definitions, unlike functions, the prevailing style is for
the opening brace to go on the same line as the struct name, like so:
struct foo {
int bar;
char *baz;
};
Indeed, grepping for 'struct [a-z_]* {$' yields about 5 times as many
matches as 'struct [a-z_]*$'.
Linus sayeth:
Heretic people all over the world have claimed that this inconsistency
is ... well ... inconsistent, but all right-thinking people know that
(a) K&R are _right_ and (b) K&R are right.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A pack v2 .idx file usually records offset using 64-bit representation
only when the offset does not fit within 31-bit, but you can handcraft
your .idx file to record smaller offset using 64-bit, storing all zero
in the upper 4-byte. By inspecting the original idx file when running
index-pack --verify, encode such low offsets that do not need to be in
64-bit but are encoded using 64-bit just like the original idx file so
that we can still validate the pack/idx pair by comparing the idx file
recomputed with the original.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given an existing .pack file and the .idx file that describes it,
this new mode of operation reads and re-index the packfile and makes
sure the existing .idx file matches the result byte-for-byte.
All the objects in the .pack file are validated during this operation as
well. Unlike verify-pack, which visits each object described in the .idx
file in the SHA-1 order, index-pack efficiently exploits the delta-chain
to avoid rebuilding the objects that are used as the base of deltified
objects over and over again while validating the objects, resulting in
much quicker verification of the .pack file and its .idx file.
This version however cannot verify a .pack/.idx pair with a handcrafted v2
index that uses 64-bit offset representation for offsets that would fit
within 31-bit. You can create such an .idx file by giving a custom offset
to --index-version option to the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove two globals, pack_idx_default version and pack_idx_off32_limit,
and place them in a pack_idx_option structure. Allow callers to pass
it to write_idx_file() as a parameter.
Adjust all callers to the API change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Entries in the delta_base array are only grouped by the bytepattern in
the delta_base union, some of which have 20-byte object name of the base
object (i.e. base for REF_DELTA objects), while others have sizeof(off_t)
bytes followed by enough NULs to fill 20-byte. The loops to iterate
through a range inside this array still needs to inspect the type of the
delta, and skip over false hits.
Group the entries also by type to eliminate the potential of false hits.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed integer overflow is not defined in C, so do not depend on it.
This fixes a problem with GCC 4.4.0 and -O3 where the optimizer would
consider "consumed_bytes > consumed_bytes + bytes" as a constant
expression, and never execute the die()-call.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/paginate-fix:
t7006 (pager): add missing TTY prerequisites
merge-file: run setup_git_directory_gently() sooner
var: run setup_git_directory_gently() sooner
ls-remote: run setup_git_directory_gently() sooner
index-pack: run setup_git_directory_gently() sooner
config: run setup_git_directory_gently() sooner
bundle: run setup_git_directory_gently() sooner
apply: run setup_git_directory_gently() sooner
grep: run setup_git_directory_gently() sooner
shortlog: run setup_git_directory_gently() sooner
git wrapper: allow setup_git_directory_gently() be called earlier
setup: remember whether repository was found
git wrapper: introduce startup_info struct
Conflicts:
builtin/index-pack.c
* jn/maint-setup-fix:
setup: split off a function to handle ordinary .git directories
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
Conflicts:
builtin/index-pack.c
index-pack already runs a repository search unconditionally; running
such a search earlier is not risky and ensures GIT_DIR will be set
correctly if the configuration needs to be accessed from
run_builtin().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this, attempting to index a pack containing objects that have been
replaced results in a fatal error that looks like:
fatal: SHA1 COLLISION FOUND WITH <replaced-object> !
Signed-off-by: Nelson Elhage <nelhage@ksplice.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now setup_git_directory_gently behaves sanely even from subdirs of
.git, so simplify index-pack by no longer protecting against that.
This reverts commit a672ea6ac5
(excluding tests).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This shrinks the top-level directory a bit, and makes it much more
pleasant to use auto-completion on the thing. Instead of
[torvalds@nehalem git]$ em buil<tab>
Display all 180 possibilities? (y or n)
[torvalds@nehalem git]$ em builtin-sh
builtin-shortlog.c builtin-show-branch.c builtin-show-ref.c
builtin-shortlog.o builtin-show-branch.o builtin-show-ref.o
[torvalds@nehalem git]$ em builtin-shor<tab>
builtin-shortlog.c builtin-shortlog.o
[torvalds@nehalem git]$ em builtin-shortlog.c
you get
[torvalds@nehalem git]$ em buil<tab> [type]
builtin/ builtin.h
[torvalds@nehalem git]$ em builtin [auto-completes to]
[torvalds@nehalem git]$ em builtin/sh<tab> [type]
shortlog.c shortlog.o show-branch.c show-branch.o show-ref.c show-ref.o
[torvalds@nehalem git]$ em builtin/sho [auto-completes to]
[torvalds@nehalem git]$ em builtin/shor<tab> [type]
shortlog.c shortlog.o
[torvalds@nehalem git]$ em builtin/shortlog.c
which doesn't seem all that different, but not having that annoying
break in "Display all 180 possibilities?" is quite a relief.
NOTE! If you do this in a clean tree (no object files etc), or using an
editor that has auto-completion rules that ignores '*.o' files, you
won't see that annoying 'Display all 180 possibilities?' message - it
will just show the choices instead. I think bash has some cut-off
around 100 choices or something.
So the reason I see this is that I'm using an odd editory, and thus
don't have the rules to cut down on auto-completion. But you can
simulate that by using 'ls' instead, or something similar.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
