This teaches "merge --log" and fmt-merge-msg to use branch description
information when merging a local topic branch into the mainline. The
description goes between the branch name label and the list of commit
titles.
The refactoring to share the common configuration parsing between
merge and fmt-merge-msg needs to be made into a separate patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using branch.$name.description as the configuration key, give users a
place to write about what the purpose of the branch is and things like
that, so that various subsystems, e.g. "push -s", "request-pull", and
"format-patch --cover-letter", can later be taught to use this
information.
The "-m" option similar to "commit/tag" is deliberately omitted, as the
whole point of branch description is about giving descriptive information
(the name of the branch itself is a better place for information that fits
on a single-line).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the description for the branch when preparing the cover letter
when available.
While at it, mark a loosely written codepath that would do a random and
useless thing given an unusual input (e.g. "^master HEAD HEAD^"), which
we may want to fix someday.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit c9bfb953 (want_color: automatically fallback to color.ui,
2011-08-17) introduced a regression where format-patch produces colorized
patches when color.ui is set to "always".
In f3aafa4 (Disable color detection during format-patch, 2006-07-09),
git_format_config was taught to intercept diff.color to avoid passing it
down to git_log_config and later, git_diff_ui_config.
Teach git_format_config to intercept color.ui in the same way.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It makes no sense to do the - possibly very expensive - call to "rev-list
<new-ref-sha1> --not --all" in check_for_new_submodule_commits() when
there aren't any submodules configured.
Leave check_for_new_submodule_commits() early when no name <-> path
mappings for submodules are found in the configuration. To make that work
reading the configuration had to be moved further up in cmd_fetch(), as
doing that after the actual fetch of the superproject was too late.
Reported-by: Martin Fick <mfick@codeaurora.org>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit ffa69e61d3, reversing
changes made to 4a13c4d148.
Adding a new command line option to receive-pack and feed it from
send-pack is not an acceptable way to add features, as there is no
guarantee that your updated send-pack will be talking to updated
receive-pack. New features need to be added via the capability mechanism
negotiated over the protocol.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current explanation of -e can be misread as allowing the user to say
I know 'git clean -XYZ' (substitute -XYZ with any option and/or
parameter) will remove paths A, B, and C, and I want them all removed
except for paths matching this pattern by adding '-e C' to the same
command line, i.e. 'git clean -e C -XYZ'.
But that is not what this option does. It augments the set of ignore rules
from the command line, just like the same "-e <pattern>" argument does
with the "ls-files" command (the user could probably pass "-e \!C" to tell
the command to clean everything the command would normally remove, except
for C). Also error out when both -x and -e are given with an explanation of
what -e means---it is a symptom of misunderstanding what -e does.
It also fixes small style nit in the parameter to add_exclude() call. The
current code only works because EXC_CMDL happens to be defined as 0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/decorate-grafts:
log: Do not decorate replacements with --no-replace-objects
log: decorate "replaced" on to replaced commits
log: decorate grafted commits with "grafted"
Move write_shallow_commits to fetch-pack.c
Add for_each_commit_graft() to iterate all grafts
decoration: do not mis-decorate refs with same prefix
* jk/color-and-pager:
want_color: automatically fallback to color.ui
diff: don't load color config in plumbing
config: refactor get_colorbool function
color: delay auto-color decision until point of use
git_config_colorbool: refactor stdout_is_tty handling
diff: refactor COLOR_DIFF from a flag into an int
setup_pager: set GIT_PAGER_IN_USE
t7006: use test_config helpers
test-lib: add helper functions for config
t7006: modernize calls to unset
Conflicts:
builtin/commit.c
parse-options.c
When asked if "refs///heads/master" is valid, check-ref-format says "Yes,
it is well formed", and when asked to print canonical form, it shows
"refs/heads/master". This is so that it can be tucked after "$GIT_DIR/"
to form a valid pathname for a loose ref, and we normalize a pathname like
"$GIT_DIR/refs///heads/master" to de-dup the slashes in it.
Similarly, when asked if "/refs/heads/master" is valid, check-ref-format
says "Yes, it is Ok", but the leading slash is not removed when printing,
leading to "$GIT_DIR//refs/heads/master".
Fix it to make sure such leading slashes are removed. Add tests that such
refnames are accepted and normalized correctly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cb/maint-quiet-push:
receive-pack: do not overstep command line argument array
propagate --quiet to send-pack/receive-pack
Conflicts:
Documentation/git-receive-pack.txt
Documentation/git-send-pack.txt
Cloning from a local repository blindly copies or hardlinks all the files
under objects/ hierarchy. This results in two issues:
- If the repository cloned has an "objects/info/alternates" file, and the
command line of clone specifies --reference, the ones specified on the
command line get overwritten by the copy from the original repository.
- An entry in a "objects/info/alternates" file can specify the object
stores it borrows objects from as a path relative to the "objects/"
directory. When cloning a repository with such an alternates file, if
the new repository is not sitting next to the original repository, such
relative paths needs to be adjusted so that they can be used in the new
repository.
This updates add_to_alternates_file() to take the path to the alternate
object store, including the "/objects" part at the end (earlier, it was
taking the path to $GIT_DIR and was adding "/objects" itself), as it is
technically possible to specify in objects/info/alternates file the path
of a directory whose name does not end with "/objects".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a test to expose a long-standing bug that is triggered when
cloning with --reference option from a local repository that has its own
alternates. The alternate object stores specified on the command line
are lost, and only alternates copied from the source repository remain.
The bug will be fixed in the next patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git branch -M <foo> <current-branch>" allows updating the current branch
which HEAD points, without the necessary house-keeping that git reset
normally does to make this operation sensible. It also leaves the reflog
in a confusing state (you would be warned when trying to read it).
"git checkout -B <current branch> <foo>" is also partly vulnerable to this
bug; due to inconsistent pre-flight checks it would perform half of its
task and then abort just before rewriting the branch. Again this
manifested itself as the index file getting out-of-sync with HEAD.
"git branch -f" already guarded against this problem, and aborts with
a fatal error.
Update "git branch -M", "git checkout -B" and "git branch -f" to share the
same check before allowing a branch to be created. These prevent you from
updating the current branch.
We considered suggesting the use of "git reset" in the failure message
but concluded that it was not possible to discern what the user was
actually trying to do.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function was not gentle at all to the callers and died without giving
them a chance to deal with possible errors. Rename it to read_gitfile(),
and update all the callers.
As no existing caller needs a true "gently" variant, we do not bother
adding one at this point.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When working with submodules it is easy to forget to push a
submodule to the server but pushing a super-project that
contains a commit for that submodule. The result is that the
superproject points at a submodule commit that is not available
on the server.
This adds the option --recurse-submodules=check to push. When
using this option git will check that all submodule commits that
are about to be pushed are present on a remote of the submodule.
To be able to use a combined diff, disabling a diff callback has
been removed from combined-diff.c.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of the "do we want color" flags default to -1 to
indicate that we don't have any color configured. This value
is handled in one of two ways:
1. In porcelain, we check early on whether the value is
still -1 after reading the config, and set it to the
value of color.ui (which defaults to 0).
2. In plumbing, it stays untouched as -1, and want_color
defaults it to off.
This works fine, but means that every porcelain has to check
and reassign its color flag. Now that want_color gives us a
place to put this check in a single spot, we can do that,
simplifying the calling code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git config --get-colorbool color.foo", we use a custom
callback that looks not only for the key that the user gave
us, but also for "diff.color" (for backwards compatibility)
and "color.ui" (as a fallback).
For the former, we use a custom variable to store the
diff.color value. For the latter, though, we store it in the
main "git_use_color_default" variable, turning on color.ui
for any other parts of git that respect this value.
In practice, this doesn't cause any bugs, because git-config
runs without caring about git_use_color_default, and then
exits. But it crosses module boundaries in an unusual and
confusing way, and it makes refactoring color handling
harder than it needs to be.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a color value either from a config file or from
the command line, we use git_config_colorbool to convert it
from the tristate always/never/auto into a single yes/no
boolean value.
This has some timing implications with respect to starting
a pager.
If we start (or decide not to start) the pager before
checking the colorbool, everything is fine. Either isatty(1)
will give us the right information, or we will properly
check for pager_in_use().
However, if we decide to start a pager after we have checked
the colorbool, things are not so simple. If stdout is a tty,
then we will have already decided to use color. However, the
user may also have configured color.pager not to use color
with the pager. In this case, we need to actually turn off
color. Unfortunately, the pager code has no idea which color
variables were turned on (and there are many of them
throughout the code, and they may even have been manipulated
after the colorbool selection by something like "--color" on
the command line).
This bug can be seen any time a pager is started after
config and command line options are checked. This has
affected "git diff" since 89d07f7 (diff: don't run pager if
user asked for a diff style exit code, 2007-08-12). It has
also affect the log family since 1fda91b (Fix 'git log'
early pager startup error case, 2010-08-24).
This patch splits the notion of parsing a colorbool and
actually checking the configuration. The "use_color"
variables now have an additional possible value,
GIT_COLOR_AUTO. Users of the variable should use the new
"want_color()" wrapper, which will lazily determine and
cache the auto-color decision.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The file-scope global variable head_sha1[] was used to hold the object
name of the current HEAD commit (unless we are about to make an initial
commit). Also there is an independent "static int initial_commit".
Fix all the functions on the call-chain that use these two variables to
take a new "(const) struct commit *current_head" argument instead, and
replace their uses, e.g. "if (initial_commit)" becomes "if (!current_head)"
and a reference to "head_sha1" becomes "current_head->object.sha1".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually this function figures out for itself whether stdout
is a tty. However, it has an extra parameter just to allow
git-config to override the auto-detection for its
--get-colorbool option.
Instead of an extra parameter, let's just use a global
variable. This makes calling easier in the common case, and
will make refactoring the colorbool code much simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets us store more than just a bit flag for whether we
want color; we can also store whether we want automatic
colors. This can be useful for making the automatic-color
decision closer to the point of use.
This mostly just involves replacing DIFF_OPT_* calls with
manipulations of the flag. The biggest exception is that
calls to DIFF_OPT_TST must check for "o->use_color > 0",
which lets an "unknown" value (i.e., the default) stay at
"no color". In the previous code, a value of "-1" was not
propagated at all.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A malicious server can return ACK with non-existent SHA-1 or not a
commit. lookup_commit() in this case may return NULL. Do not let
fetch-pack crash by accessing NULL address in this case.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
