"git rebase -i" fired post-rewrite hook when it shouldn't (namely,
when it was told to stop sequencing with 'exec' insn).
* mm/rebase-i-post-rewrite-exec:
t5407: use <<- to align the expected output
rebase -i: fix post-rewrite hook with failed exec command
rebase -i: demonstrate incorrect behavior of post-rewrite
Since Perl 5.22, "A literal '{' should now be escaped in a pattern".
Silence the recently added warning by using \{ instead.
Signed-off-by: Christian Neukirchen <chneukirchen@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The improved ARRAY_SIZE macro uses BARF_UNLESS_AN_ARRAY which expands
to a valid check for recent gcc versions and to 0 for older gcc
versions but is not defined on non-gcc builds.
Non-gcc builds need this macro to expand to 0 as well. The current outer
test (defined(__GNUC__) && (__GNUC__ >= 3)) is a strictly weaker
condition than the inner test (GIT_GNUC_PREREQ(3, 1)) so we can omit the
outer test and cause the BARF_UNLESS_AN_ARRAY macro to be defined
correctly on non-gcc builds as well as gcc builds with older versions.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent Mac OS X updates breaks the logic to detect that the machine
is on the AC power in the sample pre-auto-gc script.
* pa/auto-gc-mac-osx:
hooks/pre-auto-gc: adjust power checking for newer OS X
More Perforce row number limit workaround for "git p4".
* ld/p4-changes-block-size:
git-p4: fixing --changes-block-size handling
git-p4: add tests for non-numeric revision range
git-p4: test with limited p4 server results
git-p4: additional testing of --changes-block-size
"git commit --cleanup=scissors" was not careful enough to protect
against getting fooled by a line that looked like scissors.
* sg/commit-cleanup-scissors:
commit: cope with scissors lines in commit message
Disable "have we lost a race with competing repack?" check while
receiving a huge object transfer that runs index-pack.
* jk/index-pack-reduce-recheck:
index-pack: avoid excessive re-reading of pack directory
The tcsh completion writes a bash scriptlet but that would have
failed for users with noclobber set.
* af/tcsh-completion-noclobber:
git-completion.tcsh: fix redirect with noclobber
"git for-each-ref" reported "missing object" for 0{40} when it
encounters a broken ref. The lack of object whose name is 0{40} is
not the problem; the ref being broken is.
* mh/reporting-broken-refs-from-for-each-ref:
read_loose_refs(): treat NULL_SHA1 loose references as broken
read_loose_refs(): simplify function logic
for-each-ref: report broken references correctly
t6301: new tests of for-each-ref error handling
Various fixes around "git am" that applies a patch to a history
that is not there yet.
* pt/am-abort-fix:
am --abort: keep unrelated commits on unborn branch
am --abort: support aborting to unborn branch
am --abort: revert changes introduced by failed 3way merge
am --skip: support skipping while on unborn branch
am -3: support 3way merge on unborn branch
am --skip: revert changes introduced by failed 3way merge
Hotfix for the 'untracked-cache' topic that is already in 'master'.
* nd/untracked-cache:
read-cache: fix untracked cache invalidation when split-index is used
"git fsck" used to ignore missing or invalid objects recorded in reflog.
* mh/fsck-reflog-entries:
fsck: report errors if reflog entries point at invalid objects
fsck_handle_reflog_sha1(): new function
Traditionally, external low-level 3-way merge drivers are expected
to produce their results based solely on the contents of the three
variants given in temporary files named by %O, %A and %B on their
command line. Additionally allow them to look at the final path
(given by %P).
* jc/ll-merge-expose-path:
ll-merge: pass the original path to external drivers
Auto-detect availability of getdelim() that helps optimized version
of strbuf_getwholeline().
* es/configure-getdelim:
configure: add getdelim() check
config.mak.uname: Darwin: define HAVE_GETDELIM for modern OS X releases
"git pull" has become more aware of the options meant for
underlying "git fetch" and then learned to use parse-options
parser.
* pt/pull-optparse:
pull: use git-rev-parse --parseopt for option parsing
pull: handle git-fetch's options as well
"git format-patch --ignore-if-upstream A..B" did not like to be fed
tags as boundary commits.
* jc/do-not-feed-tags-to-clear-commit-marks:
format-patch: do not feed tags to clear_commit_marks()
"git send-email" learned to handle more forms of sendmail style
aliases file.
* es/send-email-sendmail-alias:
send-email: further warn about unsupported sendmail aliases features
t9001: add sendmail aliases line continuation tests
t9001: refactor sendmail aliases test infrastructure
send-email: implement sendmail aliases line continuation support
send-email: simplify sendmail aliases comment and blank line recognizer
send-email: refactor sendmail aliases parser
send-email: fix style: cuddle 'elsif' and 'else' with closing brace
send-email: drop noise comments which merely repeat what code says
send-email: visually distinguish sendmail aliases parser warnings
send-email: further document missing sendmail aliases functionality
"git apply" cannot diagnose a patch corruption when the breakage is
to mark the length of the hunk shorter than it really is on the
hunk header line "@@ -l,k +m,n @@"; one special case it could is
when the hunk becomes no-op (e.g. k == n == 2 for two-line context
patch output), and it learned how to do so.
* jc/apply-reject-noop-hunk:
apply: reject a hunk that does not do anything
This reverts commit d95d728aba.
It turns out that many other commands that need to interact with the
result of running diff-files and diff-index, e.g. "git apply", "git
rm", etc., need to be adjusted to the new world order it brings in.
For example, it would break this sequence to correct a whitespace
breakage in the parts you changed:
git add -N file
git diff --cached file | git apply --cached --whitespace=fix
git checkout file
In the old world order, "diff" showed a patch to modify an existing
empty file by adding its full contents, and "apply" updated the
index by modifying the existing empty blob (which is what an
Intent-to-Add entry records in the index) with that patch.
In the new world order, "diff" shows a patch to create a new file
with its full contents, but because "apply" thinks that the i-t-a
entry already exists in the index, it refused to accept a creation.
Adjusting "apply" to this new world order is easy, but we need to
assess the extent of the damage to the rest of the system the new
world order brought in before going forward and adjust them all,
after which we can resurrect the commit being reverted here.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no need to switch branches to parse another branch's ancestry.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes two instances where a &&-chain was broken in the subtree
tests and fixes a test error that was revealed because of this.
Many tests in t7900-subtree.sh make a commit and then use 'undo' to
reset the state for the next test. In the 'check hash of split' test,
an 'undo' was being invoked after a 'subtree split' even though the
particular invocation of 'subtree split' did not actually make a commit.
The subsequent check_equal was failing, but this failure was masked by
that broken &&-chain.
Removing this undo causes the failing check_equal to succeed but breaks
the a check_equal later on in the same test.
It turns out that an earlier test ('check if --message for merge works
with squash too') makes a commit but doesn't 'undo' to the state
expected by the remaining tests. None of the intervening tests cared
enough about the state of the test repo to fail and the spurious 'undo'
in 'check hash of split' restored the expected state for any remaining
test that might care.
Adding the missing 'undo' to 'check if --message for merge works
with squash too' and removing the spurious one from 'check hash of
split' fixes all tests once the &&-chains are completed.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although subtrees tests uses more spaces for indentation than tabs,
there are still quite a lot of lines indented with tabs. As tabs conform
with Git coding guidelines resolve the inconsistency in favour of tabs.
Signed-off-by: Charles Bailey <cbailey32@bloomberg.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When for_each_packed_object is called, we call
prepare_packed_git() to make sure we have the actual list of
packs. But the latter does not actually open the pack
indices, meaning that pack->nr_objects may simply be 0 if
the pack has not otherwise been used since the program
started.
In practice, this didn't come up for the current callers,
because they iterate the packed objects only after iterating
all reachable objects (so for it to matter you would have to
have a pack consisting only of unreachable objects). But it
is a dangerous and confusing interface that should be fixed
for future callers.
Note that we do not end the iteration when a pack cannot be
opened, but we do return an error. That lets you complete
the iteration even in actively-repacked repository where an
.idx file may racily go away, but it also lets callers know
that they may not have gotten the complete list (which the
current reachability-check caller does care about).
We have to tweak one of the prune tests due to the changed
return value; an earlier test creates bogus .idx files and
does not clean them up. Having to make this tweak is a good
thing; it means we will not prune in a broken repository,
and the test confirms that we do not negatively impact a
more lenient caller, count-objects.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When no diff nor merge tool is specified (config, option), mergetool-lib
is supposed to choose a default tool from a set of tools. That set is
constructed dynamically depending on the environment (graphical, editor
setting) as a space separated string of tool names.
719518f (mergetool--lib: set IFS for difftool and mergetool, 2015-05-20)
introduced a newline as IFS which breaks the parsing of the space
separated list into items, resulting in a failed search for an available
tool.
Set IFS to a space locally for the tool search.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes are described in CHANGES.
Contributions-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Contributions-by: Richard Hansen <rhansen@rhansen.org>
Contributions-by: Michael Haggerty <mhagger@alum.mit.edu>
Contributions-by: Elijah Newren <newren@gmail.com>
Contributions-by: Luke Mewburn <luke@mewburn.net>
Contributions-by: Dave Boutcher <daveboutcher@gmail.com>
Contributions-by: Azat Khuzhin <a3at.mail@gmail.com>
Contributions-by: Sebastian Schuberth <sschuberth@gmail.com>
Contributions-by: Mikko Johannes Koivunalho <mikko.koivunalho@iki.fi>
Contributions-by: Elijah Newren <newren@palantir.com>
Contributions-by: Benoît Ryder <benoit@ryder.fr>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If tput needs ~/.terminfo for the current $TERM, then tput will
succeed before HOME is changed to $TRASH_DIRECTORY (causing color to
be set to 't') but fail afterward.
One possible way to fix this is to treat HOME like TERM: back up the
original value and temporarily restore it before say_color() runs
tput.
Instead, pre-compute and save the color control sequences before
changing either TERM or HOME. Use the saved control sequences in
say_color() rather than call tput each time. This avoids the need to
back up and restore the TERM and HOME variables, and it avoids the
overhead of a subshell and two invocations of tput per call to
say_color().
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the common case that the commit encoding matches the
output encoding, we do not touch the buffer at all, which
makes things much more efficient. But it might be unclear to
a consumer that we will pass through bogus sequences.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git checkout <pathspec> can be used to reset changes in the working tree.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 102fc80d32.
There are two issues with that commit:
* It is buggy. In pseudocode, it is doing:
color is set || TERM != dumb && color works && color=t
when it should be doing:
color is set || { TERM != dumb && color works && color=t }
* It unnecessarily disables color when tput needs to read
~/.terminfo to get the control sequences.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a repository is first fetched as a shallow clone, either by
git-clone or by fetching into an empty repo, the server's capabilities
are not currently consulted. The client will send shallow requests even
if the server does not understand them, and the resulting error may be
unhelpful to the user. This change pre-emptively checks so we can exit
with a helpful error if necessary.
Signed-off-by: Mike Edgar <adgar@google.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Code clean-up.
* rs/janitorial:
dir: remove unused variable sb
clean: remove unused variable buf
use file_exists() to check if a file exists in the worktree
