* jc/better-conflict-resolution:
Fix AsciiDoc errors in merge documentation
git-merge documentation: describe how conflict is presented
checkout --conflict=<style>: recreate merge in a non-default style
checkout -m: recreate merge when checking out of unmerged index
git-merge-recursive: learn to honor merge.conflictstyle
merge.conflictstyle: choose between "merge" and "diff3 -m" styles
rerere: understand "diff3 -m" style conflicts with the original
rerere.c: use symbolic constants to keep track of parsing states
xmerge.c: "diff3 -m" style clips merge reduction level to EAGER or less
xmerge.c: minimum readability fixups
xdiff-merge: optionally show conflicts in "diff3 -m" style
xdl_fill_merge_buffer(): separate out a too deeply nested function
checkout --ours/--theirs: allow checking out one side of a conflicting merge
checkout -f: allow ignoring unmerged paths when checking out of the index
Conflicts:
Documentation/git-checkout.txt
builtin-checkout.c
builtin-merge-recursive.c
t/t7201-co.sh
This new option does essentially the same thing as -m option when checking
unmerged paths out of the index, but it uses the specified style instead
of configured merge.conflictstyle.
Setting "merge.conflictstyle" to "diff3" is usually less useful than using
the default "merge" style, because the latter allows a conflict that
results by both sides changing the same region in a very similar way to
get simplified substancially by reducing the common lines. However, when
one side removed a group of lines (perhaps a function was moved to some
other file) while the other side modified it, the default "merge" style
does not give any clue as to why the hunk is left conflicting. You would
need the original to understand what is going on.
The recommended use would be not to set merge.conflictstyle variable so
that you would usually use the default "merge" style conflict, and when
the result in a path in a particular merge is too hard to understand, use
"git checkout --conflict=diff3 $path" to check it out with the original to
review what is going on.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches git-checkout to recreate a merge out of unmerged
index entries while resolving conflicts.
With this patch, checking out an unmerged path from the index
now have the following possibilities:
* Without any option, an attempt to checkout an unmerged path
will atomically fail (i.e. no other cleanly-merged paths are
checked out either);
* With "-f", other cleanly-merged paths are checked out, and
unmerged paths are ignored;
* With "--ours" or "--theirs, the contents from the specified
stage is checked out;
* With "-m" (we should add "--merge" as synonym), the 3-way merge
is recreated from the staged object names and checked out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This lets you to check out 'our' (or 'their') version of an
unmerged path out of the index while resolving conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier we made "git checkout $pathspec" to atomically refuse
the operation of $pathspec matched any path with unmerged
stages. This patch allows:
$ git checkout -f a b c
to ignore, instead of error out on, such unmerged paths. The
fix to prevent checkout of an unmerged path from random stages
is still there.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code handles additionally "refs/remotes/<something>/name",
"remotes/<something>/name", and "refs/<namespace>/name".
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What does the user most likely want with this command?
$ git checkout --track origin/next
Exactly. A branch called 'next', that tracks origin's branch 'next'.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git checkout' uses '--' to separate options from paths, but it was not
mentioned in the documentation
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a while now, git-checkout has been more powerful than the man-page
summary would suggest (the main text does describe the new features),
so update the summary to hopefully better reflect the current
functionality. Also update the glossary description of the word checkout.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documents the branch.autosetupmerge=always setting and usage of --track
when branching from a local branch.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation used to say what the option does, but it
didn't mention a use case.
Signed-off-by: Federico Mena Quintero <federico@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch cleans up some complicated code, and replaces it with a
cleaner version, using code from remote.[ch], which got extended a
little in the process. This also enables us to fix two cases:
The earlier "fix" to setup tracking only when the original ref started
with "refs/remotes" is wrong. You are absolutely allowed to use a
separate layout for your tracking branches. The correct fix, of course,
is to set up tracking information only when there is a matching
remote.<nick>.fetch line containing a colon.
Another corner case was not handled properly. If two remotes write to
the original ref, just warn the user and do not set up tracking.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio noticed that switching on autosetupmerge unilaterally started
cluttering the config for local branches. That is not the original
intention of branch.autosetupmerge, which was meant purely for
convenience when branching off of remote branches, but that semantics
got lost somewhere.
If you still want that "new" behavior, you can switch
branch.autosetupmerge to the value "all". Otherwise, it is interpreted
as a boolean, which triggers setting up defaults _only_ when branching
off of a remote branch, i.e. the originally intended behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change "to made" to "made to", which is a typo. Use "reflog"
instead of "ref log", which is used elsewhere throughout the
documentation.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asciidoc treats {foo} as an attribute to be substituted; if
'foo' doesn't exist as an attribute, then the entire line
gets dropped. When the literal {foo} is desired, \{foo} is
required.
The exceptions to this rule are:
- inside literal blocks
- if the 'foo' contains non-alphanumeric characters (e.g.,
{foo|bar} is assumed not to be an attribute)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "-b --track newbranch oldbranch" gives the error:
git checkout: updating paths is incompatible with switching
branches/forcing
However, "--track -b ..." works just fine.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix the description of the --no-track option so it no longer says the
opposite of what was intended. Also mention branch.autosetupmerge
explicitly.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"Force a re-read of everything" doesn't mean much to me.
Also some minor grammar fixes.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In order to track and build on top of a branch 'topic' you track from
your upstream repository, you often would end up doing this sequence:
git checkout -b mytopic origin/topic
git config --add branch.mytopic.remote origin
git config --add branch.mytopic.merge refs/heads/topic
This would first fork your own 'mytopic' branch from the 'topic'
branch you track from the 'origin' repository; then it would set up two
configuration variables so that 'git pull' without parameters does the
right thing while you are on your own 'mytopic' branch.
This commit adds a --track option to git-branch, so that "git
branch --track mytopic origin/topic" performs the latter two actions
when creating your 'mytopic' branch.
If the configuration variable branch.autosetupmerge is set to true, you
do not have to pass the --track option explicitly; further patches in
this series allow setting the variable with a "git remote add" option.
The configuration variable is off by default, and there is a --no-track
option to countermand it even if the variable is set.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since `git add` is the approved porcelain for an end-user to invoke
when they want to manipulate the index, porcelain documentation
should steer the user to this command rather than the pure plumbing
update-index.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The documentation still talked about the unnecessary 'safety'
in git-checkout.
Pointed out by Matthias Lederhofer.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Those new messages are certainly nice, but there might be cases where
they are simply unwelcome, like when git-commit is used within scripts.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add discussion section to git-checkout documentation and mention
detached HEAD in repository-layout document.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* sp/reflog:
Enable ref log creation in git checkout -b.
Create/delete branch ref logs.
Include ref log detail in commit, reset, etc.
Change order of -m option to update-ref.
Correct force_write bug in refs.c
Change 'master@noon' syntax to 'master@{noon}'.
Log ref updates made by fetch.
Force writing ref if it doesn't exist.
Added logs/ directory to repository layout.
General ref log reading improvements.
Fix ref log parsing so it works properly.
Support 'master@2 hours ago' syntax
Log ref updates to logs/refs/<ref>
Convert update-ref to use ref_lock API.
Improve abstraction of ref lock/write.
Its nice to have git-check-ref-format actually get mentioned in
git-branch's documentation as the syntax of a ref name must conform
to what is described in git-check-ref-format.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Switch git checkout -b to use git-update-ref rather than echo and
a shell I/O redirection. This is more in line with typical GIT
commands and allows -b to be logged according to the normal ref
logging rules.
Added -l option to allow users to create the ref log at the same
time as creating a branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unfortunately docbook does not allow a callout to be
referenced from inside a callout list description.
Rewrite one paragraph in git-reset man page to work
around this limitation.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
* Instead of going interactive, introduce a command line switch
'-m' to allow merging changes when normal two-way merge by
read-tree prevents branch switching.
* Leave the unmerged stages intact if automerge fails, but
reset index entries of cleanly merged paths to that of the
new branch, so that "git diff" (not "git diff HEAD") would
show the local modifications.
* Swap the order of trees in read-tree three-way merge used in
the fallback, so that `git diff` to show the conflicts become
more natural.
* Describe the new option and give more examples in the documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When extra paths arguments are given, git-checkout reverts only those
paths to either the version recorded in the index or the version
recorded in the given tree-ish.
This has been on the TODO list for quite a while.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07 17:45:20 -07:00
Renamed from Documentation/git-checkout-script.txt (Browse further)
