In this regexp, ' |\n' is used, whereas its equivalent '[ \n]', which is
clearer, is used elsewhere. Make the style coherent.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use {}{} instead of /// when slashes are used inside the regexp so as not to
escape it.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A "split ' '" is turned into a "split / /", which changes its behaviour: the
old method matched a run of whitespaces (/\s*/), while the new one will match a
single space, which is what we want here. Indeed, in other contexts,
changing split(' ') to split(/ /) could potentially be a regression, however,
here, when parsing the output of "rev-list --parents", whose output SHA-1's are
each separated by a single space, splitting on a single space is perfectly
correct.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
m// and // is used randomly. It is better to use the m modifier only when
needed, e.g., when the regexp uses another separator than //.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Subroutines' parameters should be assigned to variable before doing anything
else
Besides, existing instruction affected a variable inside a "if", which break
Git's coding style
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Put first parameter of map inside a block, for better readability.
Follow BuiltinFunctions::RequireBlockMap
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
%basetimestamps declaration was lost in the middle of subroutines
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perl's split function takes a regex pattern argument. You can also
feed it an expression, which is then compiled into a regex at runtime.
It therefore works to pass your pattern via single quotes, but it is
much less obvious to a reader that the argument is meant to be a
regex, not a static string. Using the traditional slash-delimiters
makes this easier to read.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git difftool" can take both revs to be compared and pathspecs.
"git show" takes revs, revs:path and pathspecs.
* rr/complete-difftool-fixup:
completion: show can take both revlist and paths
completion: difftool takes both revs and files
The bridge to MediaWiki has been updated to use the credential
helper interface in Git.pm, losing its own and the original
implementation the former was based on.
* bp/mediawiki-credential:
git-remote-mediawiki: use Git.pm functions for credentials
The files $g/rebase-{merge,apply}/{head-name,msgnum,end} are not
guaranteed to exist. When attempting to cat them, squelch the error
output.
In addition to guarding against stray directories, this patch addresses
a real problem:
# on terminal 1
$ git rebase -i master
# ignore editor, and switch to terminal 2
cat: .git/rebase-merge/msgnum: No such file or directory
cat: .git/rebase-merge/end: No such file or directory
$
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Blameview was a quick-and-dirty demonstration of how blame's
incremental output could be used in an interface. These days
one can find much better (and less ugly!) demonstrations in
"git gui blame" and "tig blame".
The only advantage blameview has is that its code is perhaps
simpler to read. However, that is balanced by the fact that
it probably has bugs, as nobody uses it nor has touched the
code in 6 years. An implementor is probably better off just
reading the "incremental output" section of "man git-blame".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users may be confused when they run the perl script directly.
A good way to detect this is to check the number of parameters used to call the
script, which is never different from 2 in a normal use.
Display a proper error message to avoid any confusion.
Signed-off-by: Célestin Matte <celestin.matte@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hint users when https:// connection failed to check the certificate.
* mm/mediawiki-https-fail-message:
git-remote-mediawiki: better error message when HTTP(S) access fails
* fc/remote-bzr:
remote-bzr: add fallback check for a partial clone
remote-bzr: reorganize the way 'wanted' works
remote-bzr: trivial cleanups
remote-bzr: change global repo
remote-bzr: delay cloning/pulling
remote-bzr: simplify get_remote_branch()
remote-bzr: fix for files with spaces
remote-bzr: recover from failed clones
The 'git show' completion uses __git_complete_file (aliased to
__git_complete_revlist_file), because accepts <tree-ish>:<path> as
well as <commit-ish>. But the command also accepts range of commits
in A..B notation, so using __git_complete_revlist_file is more
appropriate.
There still remain two users of __git_complete_file, completions for
"archive" and "ls-tree". As these commands do not take range
notation, and "git show" no longer uses __git_complete_file, the
implementation of it can be updated not to complete ranges, but that
is a separate topic.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash prompt code (in contrib/) displayed the name of the branch
being rebased when "rebase -i/-m/-p" modes are in use, but not the
plain vanilla "rebase".
* fc/show-branch-in-rebase-am:
prompt: fix for simple rebase
zsh prompt script that borrowed from bash prompt script did not
work due to slight differences in array variable notation between
these two shells.
* tg/maint-zsh-svn-remote-prompt:
prompt: fix show upstream with svn and zsh
It turns out that git-subtree script does not have to be run with
bash.
* dm/unbash-subtree:
contrib/git-subtree: Use /bin/sh interpreter instead of /bin/bash
Prompt support (in contrib/) for zsh is updated to use colors.
* rr/zsh-color-prompt:
prompt: colorize ZSH prompt
prompt: factor out gitstring coloring logic
prompt: introduce GIT_PS1_STATESEPARATOR
In 52dce6d, a new credential function was added to Git.pm, based on
git-remote-mediawiki's functions. The logical follow-up is to use
those functions in git-remote-mediawiki.
Signed-off-by: Benoit Person <benoit.person@ensimag.fr>
Signed-off-by: Matthieu Moy <matthieu.moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git difftool' is clearly a frontend to 'git diff' and is used in
exactly the same way, but it uses a misleadingly named completion
function __git_complete_file. It happens to work only because it
calls __git_complete_revlist_file that completes both revs and
paths.
Change it to use __git_complete_revlist_file, just like 'git diff'.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's _very_ slow in many cases, and there's really no point in fetching
*everything* from the remote just for completion. In many cases it might
be faster for the user to type the whole thing.
If the user manually specifies 'refs/*', then the full ls-remote
completion is triggered.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git subtree" (in contrib/) had one codepath with loose error
checks to lose data at the remote side.
* jk/subtree-do-not-push-if-split-fails:
contrib/subtree: don't delete remote branches if split fails
It's better to check in multiple locations, so the user doesn't have to.
And update the documentation.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are rebasing without options ('am' mode), the head rebased lives
in '$g/rebase-apply/head-name', so lets use that information so it's
reported the same way as if we were doing other rebases (-i or -m).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My use-case is an invalid SSL certificate. Pulling from the wiki with a
recent version of libwww-perl fails, and git-remote-mediawiki gave no
clue about the reason. Give the mediawiki API detailed error message, and
since it is not so informative, hint the user about an invalid SSL
certificate on https:// urls.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add protocol imap, imaps, ftp and smtp for credential-osxkeychain.
Signed-off-by: Xidorn Quan <quanxunzhen@gmail.com>
Acked-by: John Szakmeister <john@szakmeister.net>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
And get rid of the remote-hg.force-push option hack.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This needs a specific patch from Git not applied yet.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's better to catch the exception later on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Always convert to strings (they are unicode because they come from JSON).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise replacing a file with a directory doesn't work.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to show the remote heads, not the internal ones, which might
have garbage.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It simply picks the last head that is not closed, but we have a stored
list of open heads.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that when a diverge is detected, we know which ref to report an error
for.
Also, since we are not throwing an exception, return a proper error
code.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The version from Mercurial is extremely inefficient and convoluted, this
version achieves basically the same, at least for our purposes.
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one from mercurial does a ton of things we are not interested in,
and we need some special modifications which are impossible otherwise.
Most of the code is borrowed from Mercurial, and cleaned up, but should
be functionally the same for our purposes, except that multiple heads
are not detected.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't care about the rest, and in fact, we shouldn't try to push
everything, as there might be garbage from previous failed pushes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we update the 'old' node, we might be updating the remote bookmark
even when our 'new' node is not related at all to what the remote has,
effectively forcing an update.
Let's do that only when forced push is configured.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't need to update both internal and remote bookmarks, so let's do
one or the other, and move the shared code earlier, so it's simpler.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With lots branches and bookmarks, non-ff, updated and new.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
From the point of view of Mercurial, this creates a new branch head,
and requires a forced push.
Ideally, however, we would want it to work just like in git; new
branches can be pushed without problems.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Neither mercurial nor git allows pushing to a remote when it's a
non-fast-forward push. We should be able to detect these errors and
report them properly, as opposed to throwing an exception
stack-trace.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic when working with a local repository is totally different from
the one where we work with a remote repository; we need to pull and push
from it.
All this logic is currently not tested at all, so let's introduce a
variable to force the remote behavior.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We want to make sure everything works correctly, even if there's a
'master' bookmark in Mercurial.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial always checks out the 'default' branch, so there's no point in
complicating our lives trying to do something fancier, which causes
different behavior depending on whether the repository is local or
remote.
So let's always use 'default' (which we translate to 'master'), unless
we are in hg-git mode, which expects us to use the 'master' bookmark
instead.
Also, update the tests that used to check for different checkout
behaviors to simply check that the refs are there, remove unnecessary
ones, and fix the ones that expect something different.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to manually keep track of the revision count.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Jed Brown; there's no need to re-import all the commits.
Cc: Jed Brown <jed@59a2.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we won't know if revisions are replaced.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We won't be able to count the unmarked commits, but we are not going to
be able to do that anyway when we switch to SHA-1 ids.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we don't have to have duplicated Mercurial objects.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user might have then configured differently, plus, all of them will
be loaded anyway later on.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we don't need a temporary directory.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So it's more standardized between all the tests.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We only need to get the remote dict once.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user specified a list of branches, we ignore what the remote
repository lists, and simply use the branches directly. Since some
remotes don't report the branches correctly, this is useful.
Otherwise either fetch the repo, or the branch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until the branch is actually going to be used.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need for 'origin', it's only needed for the bzrdir 'sprout' method,
which can be greatly simplified.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the maximum number of splits to make when dividing the diff stat
lines based on space characters.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the __git_ps1 git prompt gives the following error with a
repository converted by git-svn, when used with zsh:
__git_ps1_show_upstream:19: bad pattern: svn_remote[
__git_ps1_show_upstream:45: bad substitution
To reproduce the problem, the __git_ps1_show_upstream function can be
executed in a repository converted with git-svn. Both those errors are
triggered by spaces after the '['.
Zsh also doesn't support initializing an array with `local var=(...)`.
This triggers the following error:
__git_ps1_show_upstream:41: bad pattern: svn_upstream=(commit
Use
local -a
var=(...)
instead to make is compatible.
This was introduced by 6d158cba (bash completion: Support "divergence
from upstream" messages in __git_ps1), when the script was for bash
only.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Let's specify a merge tool, otherwise mercurial might open one and hang
our tests waiting for user input.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These remote helpers use 'env python', not PYTHON_PATH, so that's where
we should check for the extensions. Otherwise, if 'python' is not
PYTHON_PATH (e.g. /usr/bin/python: Makefile's default), there will be a
mismatch between the python libraries actually accessible to the remote
helpers.
Suggested by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The other configurations were added in the wrong place.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Follow the style of the previous configurations.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh completion wrapper doesn't reimplement __gitcompadd(). Although it
should be trivial to do that, let's use __gitcomp_nl() which achieves
exactly the same thing, specially since the suffix ($4) has to be empty.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use /bin/sh interpreter instead of /bin/bash for contrib/git-subtree:
it's required for systems which don't use bash by default (for example,
FreeBSD), while there seem to be no bashisms in the script (confirmed
by looking through the source and tesing subtree functionality with
FreeBSD's /bin/sh) to require specifically bash and not the generic
posix shell.
Signed-off-by: Dmitry Marakasov <amdmi3@amdmi3.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git clone hangs on windows, and file.write would return errno 22 inside
of mercurial's windows.winstdout wrapper class. This patch sets stdout's
mode to binary, fixing both issues.
[fc: cleaned up]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Down to v2.0, by using older but still valid interfaces.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add colors suitable for use in the ZSH prompt. Having learnt that the
ZSH equivalent of PROMPT_COMMAND is precmd (), you can now use
GIT_PS1_SHOWCOLORHINTS with ZSH.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can extend it with ZSH-colors in a later patch.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A typical prompt looks like:
artagnon|master *=:~/src/git$
^
why do we have this space?
Nobody has branch names that end with +, *, =, < or > anyway, so it
doesn't serve the purpose of disambiguation.
Make this separator configurable via GIT_PS1_STATESEPARATOR. This means
that you can set it to "" and get this prompt:
artagnon|master*=:~/src/git$
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 24317ef32a.
Different versions of Mercurial have different arguments for
bookmarks.updatefromremote(), while it should be possible to call the
right function with the right arguments depending on the version, it's
safer to restore the old behavior for now.
Reported by Rodney Lorrimar.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 95b0c60 (remote-bzr: add support for bzr repos) introduced a
regression by assuming all bzr remote repos are listable, but they are
not.
If they are not listable they are basically useless, so let's assume
there is no bzr repo.
Reported-by: Thorsten Kranzkowski <dl8bcu@dl8bcu.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise, the user would never ever see new bookmarks, only the
ones that (s)he initially cloned.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We skip it locally, but not for the remote, so let's do so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In certain situations we might end up pushing garbage revisions
(e.g. in a rebase), and the patches to deal with that haven't been
merged yet. So let's disable forced pushes by default.
We are essentially reverting back to the old v1.8.2 behavior, to
minimize the possibility of regressions, but in a way the user can
configure.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user creates a new branch with git:
% git checkout -b branches/devel
and then pushes this branch
% git push origin branches/devel
which is the way to push new mercurial branches, we do want to
create a branch, but the command would fail without newbranch=True.
This only matters when force_push=False, but setting newbranch=True
unconditionally does not hurt.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove try/except check because we are no longer calling
check_output(), which may throw an exception.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop unused "global", and remove redundant comparison of two files.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a clone exists with the old organization (v1.8.2) it will prevent
the new shared bzr repository organization from working, so let's
remove this repository, which is not used any more.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using sed -e '/[0-9]\+//' to find "one or more digits" is not
portable.
Use the Basic Regular Expression '/[0-9][0-9]*//' instead.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SVN::Fetcher module is now able to filter for inclusion as well
as exclusion (as used by --ignore-path). Also added tests, documentation
changes and git completion script.
If you have an SVN repository with many top level directories and you
only want a git-svn clone of some of them then using --ignore-path is
difficult as it requires a very long regexp. In this case it's much
easier to filter for inclusion.
[ew: remove trailing whitespace]
Signed-off-by: Paul Walmsley <pjwhams@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
There's no need for a separate function; we can call
'emulate -k ksh func'.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The comment was copied from hg-fast-export, not used anymore.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that the previous tip goes away, we should not assume it's
always present. Fortunately we are only using it to calculate the
progress to display to the user, so only that needs to be fixed.
Also, add a test that triggers this issue.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-bzr:
remote-bzr: avoid bad refs
remote-bzr: convert all unicode keys to str
remote-bzr: access branches only when needed
remote-bzr: delay peer branch usage
remote-bzr: iterate revisions properly
remote-bzr: improve progress reporting
remote-bzr: add option to specify branches
remote-bzr: add custom method to find branches
remote-bzr: improve author sanitazion
remote-bzr: add support for shared repo
remote-bzr: fix branch names
remote-bzr: add support for bzr repos
remote-bzr: use branch variable when appropriate
remote-bzr: fix partially pushed merge
remote-bzr: fixes for branch diverge
remote-bzr: add support to push merges
remote-bzr: always try to update the worktree
remote-bzr: fix order of locking in CustomTree
remote-bzr: delay blob fetching until the very end
remote-bzr: cleanup CustomTree
Versions of fast-export before v1.8.2 throws a bad 'reset' commands
because of a behavior in transport-helper that is not even needed.
We should ignore them, otherwise we will treat them as branches and
fail.
This was fixed in v1.8.2, but some people use this script in older
versions of git.
Also, check if the ref was a tag, and skip it for now.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise some versions of bazaar might barf.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
zsh is smart enough to add the right suffix while completing, there's no
point in trying to do the same as bash.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using "git subtree push" to split out a subtree and push it to a
remote repository, we do not detect if the split command fails which
causes the LHS of the refspec to be empty, deleting the remote branch.
Fix this by pulling the result of the split command into a variable so
that we can die if the command fails.
Reported-by: Steffen Jaeckel <steffen.jaeckel@stzedn.de>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bazaar doesn't seem to be tested for multiple usage of branches, so
resources seem to be leaked all over. Let's try to minimize this by
accessing the Branch objects only when needed.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we don't need to store the list of all the revisions, which
doesn't seem to be very memory efficient with bazaar's design, for
whatever reason.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to manually count the revisions, and also, this would help to
iterate more properly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We might not want all the branches. And branch handling in bazaar is
rather tricky, so it's safer to simply specify them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The official method is incredibly inefficient and slow.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we don't end up with '<None>', and also synchronize it with the
one from remote-hg.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way all the remotes share the same data, so adding multiple
remotes, or renaming them doesn't create extra overhead.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When branches have '/' in their name (aka. sub-branches), bazaar seems
to choke while creating the new directory.
Also, git cannot have both 'foo' and 'foo/bar'.
So let's replace slashes with a plus sign.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In bazaar, a repository can contain multiple branches, and previously we
were supporting only one branch at a time. Now we fetch them all.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There should be no functional changes. Basically we want to reserve the
'repo' variable.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If part of the merge was already pushed, we don't have the blob_marks
available, however, the commits are already stored in bazaar, so we can
use the revision_tree to fetch the contents.
We want to do this only when there's no other option.
There's no easy way to test this.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the branches diverge we want to reset the pointer to where the remote
actually is. Since we can access remote branches just as easily as local
ones, let's do so.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In order to do that, we need to store the marks of every file, so that
they can be fetched when needed. Unfortunately we can't tell bazaar that
nothing changed, we need to send the data so that it can figure it out
by itself.
And since it will be requesting a bunch of information by the file_id,
it's better to have a helper dict (rev_files), so that we can fetch it
quickly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It doesn't seem to make any difference, but revision_tree() requires a
lock.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Might be more efficient, but the real reason to use the marks will be
revealed in upcoming patches.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
224c2171 (remote.c: introduce remote.pushdefault, 2013-04-02)
introduced the remote.pushdefault configuration variable, but forgot
to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
9f765ce (remote.c: introduce branch.<name>.pushremote, 2013-04-02)
introduced the configuration variable branch.*.pushremote, but forgot
to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
complete: zsh: use zsh completion for the main cmd
complete: zsh: trivial simplification
git-completion.bash: complete branch.*.rebase as boolean
git-completion.bash: add diff.submodule to config list
git-completion.bash: lexical sorting for diff.statGraphWidth
So that we can have a nice zsh completion output:
% git <tab>
add -- add file contents to the index
bisect -- find by binary search the change that introduced a bug
branch -- list, create, or delete branches
checkout -- checkout a branch or paths to the working tree
clone -- clone a repository into a new directory
commit -- record changes to the repository
diff -- show changes between commits, commit and working tree, etc
fetch -- download objects and refs from another repository
grep -- print lines matching a pattern
init -- create an empty Git repository or reinitialize an existing one
log -- show commit logs
merge -- join two or more development histories together
mv -- move or rename a file, a directory, or a symlink
pull -- fetch from and merge with another repository or a local branch
push -- update remote refs along with associated objects
rebase -- forward-port local commits to the updated upstream head
reset -- reset current HEAD to the specified state
rm -- remove files from the working tree and from the index
show -- show various types of objects
status -- show the working tree status
tag -- create, list, delete or verify a tag object signed with GPG
And other niceties, like 'git --git-dir=<tab>' showing only directories.
For the rest, the bash completion stuff is still used.
Also, add my copyright, since this more than a thin wrapper.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There should be no functional changes.
The only reason I wrapped this code around a sub-function is because zsh
did the same in it's bashcompinit script in order to declare the special
variable 'words' as hidden, but only in this context.
There's no need for that any more since we access __git_main directly,
so 'words' is not modified, so there's no need for the sub-function.
In zsh mode the array indexes are different though.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6fac1b83 (completion: add missing config variables, 2009-06-29) added
"rebase" to the list of completions for "branch.*.*", but forgot to
specify completions for the values that this configuration variable
can take (namely "false" and "true"). Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c47ef57 (diff: introduce diff.submodule configuration variable,
2012-11-13) introduced the diff.submodule configuration variable, but
forgot to teach git-completion.bash about it. Fix this.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
df44483a (diff --stat: add config option to limit graph width,
2012-03-01) added the option diff.startGraphWidth to the list of
configuration variables in git-completion.bash, but failed to notice
that the list is sorted alphabetically. Move it to its rightful place
in the list.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refactor the code into the only caller; __git_index_files().
Also, Somehow messing up with the 'path' variable messes up the 'PATH'
variable. So let's not do that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Just like before fea16b4 (git-completion.bash: add support for path
completion).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This way we don't need all the compat stuff, different filters, and so
on. Also, now we complete exactly the same in bash 3 and bash 4.
This is the way bash-completion did it for quite some time, when bash 3
was supported. For more information about the hack:
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=272660#64
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The calls to __gitcomp_file() are essentially the same, but with
different prefix.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the end of the day what we really need is to find out the files that
have been staged, or modified, because those files are the ones that
make sense to pass as arguments to 'git commit'.
We need diff-index to find those out, since 'git ls-files' doesn't do
that.
But we don't need wrappers and wrappers basically identical to the ones
used for 'git ls-files', when we can pretend it receives a --committable
option that would return what we need.
That way, we can remove a bunch of code without any functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the rest of the script does; let's not access COMPREPLY directly.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only caller, __git_complete_index_file() doesn't specify any limits
to the options for 'git ls-files', neither should this function.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's added by fast-export, the user didn't type it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise we get notification, progress bars, and what not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bazaar might convert the URL to something more appropriate, like an
absolute path. Lets store that instead of the original URL, which won't
work from a different working directory if it's relative.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Carried from remote-hg.
The problem reportedly happened after doing a push that fails, the abort
causes the state of remote-hg to go bad, this happens because
remote-hg's marks are not stored, but 'git fast-export' marks are.
Ensure that the marks are _always_ stored.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not needed since we use xrange ourselves.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No functional changes. Typos, unused variables, redundant operations,
and white-spaces.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-hg:
remote-hg: strip extra newline
remote-hg: use marks instead of inlined files
remote-hg: small performance improvement
remote-hg: allow refs with spaces
remote-hg: don't update bookmarks unnecessarily
remote-hg: add support for schemes extension
remote-hg: improve email sanitation
remote-hg: add custom local tag write code
remote-hg: write tags in the appropriate branch
remote-hg: custom method to write tags
remote-hg: add support for tag objects
remote-hg: add branch_tip() helper
remote-hg: properly mark branches up-to-date
remote-hg: use python urlparse
remote-hg: safer bookmark pushing
remote-helpers: avoid has_key
The shell syntax "export X=Y" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The shell syntax "export X=Y A=B" is not understood by all shells.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not just randomly synchronize the revisions with no checks at
all.
I don't have any evidence that there's anything wrong with the
current code, which Bazaar seems to use, but for different purposes.
Let's use the logic Bazaar UI uses to avoid surprises.
Also, add a non-ff check.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a rebase stops (e.g. interrupted by a merge conflict), it could
be useful to know how far a rebase has progressed and how many
commits in total this rebase will apply. Teach the __git_ps1()
command to display the number of commits so far applied and the
total number of commits to be applied, like this:
((3ec0a6a...)|REBASE 2/5)
In the example above the rebase has stopped at the second commit due to
a merge conflict and there are a total number of five commits to be
applied by this rebase.
This information can be already obtained from the following files which are
being generated during the rebase:
GIT_DIR/.git/rebase-merge/msgnum (git-rebase--merge.sh)
GIT_DIR/.git/rebase-merge/end (git-rebase--merge.sh)
GIT_DIR/.git/rebase-apply/next (git-am.sh)
GIT_DIR/.git/rebase-apply/last (git-am.sh)
but "rebase -i" does not leave necessary clues.
Implement this feature by doing these three things:
1) Modify git-rebase--interactive.sh to also create
GIT_DIR/.git/rebase-merge/msgnum
GIT_DIR/.git/rebase-merge/end
files for the number of commits so far applied and the total
number of commits to be applied.
2) Modify git-prompt.sh to read and display info from the above
files.
3) Update test t9903-bash-prompt.sh to reflect changes introduced
by this patch.
Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove one of two consecutive, identical blocks for "git commit -c".
This was caused by a mechanical mismerge at d931e2fb25 (Merge
branch 'mp/complete-paths', 2013-02-08). The side branch wanted to
add this block at fea16b47 but the same fix was done independently
at 685397585 already.
Signed-off-by: Mårten Kongstad <marten.kongstad@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no functional change since mercurial commit operation strips
that anyway, but that's no excuse for us not to do the right thing. So
let's be explicit about it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can find already exported ones. We can never be 100% sure
that we already exported such data, due to mercurial design, it at least
sometimes we should detect them, and so should give us some performance
boost.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Load previous manifest first as Mercurial does; for caching reasons.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we can use shortened URLs, for example 'bb:://felipec/repo'
(Bitbucket).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no point in calling the tag method for such simple action. Not
that we care much about the hg-git compat mode, it's mostly just for
comparison testing purposes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The one from mercurial is meant for users, on top of the latest tip.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Idea from gitifyhg, the backwards compatibility is how Mercurial used to
do it.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's simpler, and we don't need to depend on certain Mercurial versions.
Also, now we don't update the URL if 'file://' is not present.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is possible that the remote has changed the bookmarks, so let's fetch
them before we make any assumptions, just the way mercurial does.
Probably doesn't make a difference, but better be safe than sorry.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is deprecated.
[fc: do the same in remote-bzr]
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We signal presense of untracked files by adding a per-cent sign '%'
to the prompt. But because '%' is used as an escape character to
introduce prompt customization in zsh (just like bash prompt uses
'\' to escape '\u', '\h', etc.), we need to say '%%' to get a
literal per-cent.
Helped-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to a user visible change to offer more options to cherry-pick,
generally cleans up and simplifies the code.
* fc/completion:
completion: small optimization
completion: inline __gitcomp_1 to its sole callsite
completion: get rid of compgen
completion: add __gitcomp_nl tests
completion: add new __gitcompadd helper
completion: get rid of empty COMPREPLY assignments
completion: trivial test improvement
completion: add more cherry-pick options
git fast-import expects an extra newline after the commit message data,
but we are adding it only on hg-git compat mode, which is why the
bidirectionality tests pass.
We should add it unconditionally.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the current transport-helper code, refs without namespaced refspecs don't
work correctly, so let's always use them.
Some people reported issues with 'git clone --mirror', and this fixes them, as
well as possibly others.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
No need to calculate a new $c with a space if we are not going to do
anything it with it.
There should be no functional changes, except that a word "foo " with no
suffixes can't be matched. But $cur cannot have a space at the end
anyway. So it's safe.
Based on the code from SZEDER Gábor.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point in calling a separate function that is only used
in one place. Especially considering that there's no need to call
compgen, and we traverse the words ourselves both in __gitcompadd,
and __gitcomp_1.
Let's squash the functions together, and traverse only once.
This improves performance. For N number of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.005s
new: 0.001s
== 100 ==
original: 0.009s
new: 0.006s
== 1000 ==
original: 0.027s
new: 0.019s
== 10000 ==
original: 0.163s
new: 0.151s
== 100000 ==
original: 1.555s
new: 1.497s
No functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The functionality we use from compgen is not much, we can do the same
manually, with drastic improvements in speed, especially when dealing
with only a few words.
This patch also has the sideffect that brekage reported by Jeroen Meijer
and SZEDER Gábor gets fixed because we no longer expand the resulting
words.
Here are some numbers filtering N amount of words:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.000s
== 100 ==
original: 0.003s
new: 0.002s
== 1000 ==
original: 0.012s
new: 0.011s
== 10000 ==
original: 0.056s
new: 0.066s
== 100000 ==
original: 2.669s
new: 0.622s
If the results are not narrowed:
== 1 ==
original: 0.002s
new: 0.000s
== 10 ==
original: 0.002s
new: 0.001s
== 100 ==
original: 0.004s
new: 0.004s
== 1000 ==
original: 0.020s
new: 0.015s
== 10000 ==
original: 0.101s
new: 0.355s
== 100000 ==
original: 2.850s
new: 31.941s
So, unless 'git checkout <tab>' usually gives you more than 10000
results, you'll get an improvement :)
Other possible solutions perform better after 1000 words, but worst if
less than that:
COMPREPLY=($(awk -v cur="$3" -v pre="$2" -v suf="$4"
'$0 ~ cur { print pre$0suf }' <<< "$1" ))
COMPREPLY=($(printf -- "$2%s$4\n" $1 | grep "^$2$3"))
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The idea is to never touch the COMPREPLY variable directly.
This allows other completion systems (i.e. zsh) to override
__gitcompadd, and do something different instead.
Also, this allows further optimizations down the line.
There should be no functional changes.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make the shell script more portable:
- Split export X=Y into 2 lines
- Use printf instead of echo -e
Use UTF-8 code points which are not decomposed by the filesystem:
Code points like "á" will be decomposed by Mac OS X.
bzr is unable to find the file "á" on disk.
Use code points from unicode which can not be decomposed.
In other words, the precompsed form use the same bytes as decomposed.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Acked-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
Noticed with Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most of these were found using Lucas De Marchi's codespell tool.
Others were pointed out by Eric Sunshine.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no functional reason for those, the only purpose they are
supposed to serve is to say "we don't provide any words here", but
even for that it's not used consistently.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hg_log() test helper uses the "--graph" parameter that is
implemented by the GraphLog extension. If the extension is not activated
by the user, the parameter is not available. Activate the extension in
setup().
Also changes the way we grep the output in hg_log(). The pipe operator
can hide the return code of hg command. As a matter of fact, if log
fails because it doesn't know about "--graph", it doesn't report any
failure and let's you think everything worked.
Signed-off-by: Antoine Pelisse <apelisse@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial allows absolute file paths, and Git doesn't like that.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem reportedly happened after doing a push that fails, the abort
causes the state of remote-hg to go bad, this happens because
remote-hg's marks are not stored, but 'git fast-export' marks are.
Ensure that the marks are _always_ stored.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If set to true acts as hg's clone/pull --insecure option.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cloning or pushing fails, we don't want to show a stack-trace.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ideally we shouldn't do this, as it's not recommended in mercurial
documentation, but there's no other way to push multiple bookmarks (on
the same branch), which would be the behavior most similar to git.
At the same time, add a configuration option for the people that don't
want to risk creating new remote heads.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mercurial emits messages like "searching for changes", "no changes
found", etc. meant for the use of its own UI layer, which break the pipe
between transport helper and remote helper.
Since there's no way to silence Mercurial, let's redirect to standard
error.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set the maximum number of splits to make when dividing the diff stat
lines based on space characters.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
revision_history() is deprecated and doesn't do what we want (revno
instead of dotted_revno?).
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous patches didn't deal with all the scenarios.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* fc/remote-helpers-test-updates:
remote-hg: fix hg-git test-case
remote-bzr: remove stale check code for tests
remote-helpers: fix the run of all tests
remote-bzr: avoid echo -n
Using grep "devel\s\+3:" to find at least one whitspace is not
portable on all grep versions; not all grep versions understand "\s"
as a "whitespace".
Use a literal TAB followed by SPACE.
The + as a qualifier for "one or more" is not a basic regular
expression; use egrep instead of grep.
Signed-off-by: Torsten Bögershausen <tboegi@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
