My sp/mmap changes to pack-check.c modified the function such that
it expects packed_git.pack_size to be populated with the total
bytecount of the packfile by the caller.
But that isn't the case for packs obtained by git-http-fetch as
pack_size was not initialized before being accessed. This caused
verify_pack to think it had 2^32-21 bytes available when the
downloaded pack perhaps was only 305 bytes in length. The use_pack
function then later dies with "offset beyond end of packfile"
when computing the overall file checksum.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked write() calls. Often we are
expecting write() to write exactly the size we requested or fail,
this fails to handle interrupts or short writes. Switch to using
the new write_in_full(). Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xwrite().
Note, the changes to config handling are much larger and handled
in the next patch in the sequence.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have a number of badly checked read() calls. Often we are
expecting read() to read exactly the size we requested or fail, this
fails to handle interrupts or short reads. Add a read_in_full()
providing those semantics. Otherwise we at a minimum need to check
for EINTR and EAGAIN, where this is appropriate use xread().
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "int *flag" parameter to resolve_ref() and makes
for_each_ref() family to call callback function with an extra
"int flag" parameter. They are used to give two bits of
information (REF_ISSYMREF and REF_ISPACKED) about the ref.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a long overdue fix to the API for for_each_ref() family
of functions. It allows the callers to specify a callback data
pointer, so that the caller does not have to use static
variables to communicate with the callback funciton.
The updated for_each_ref() family takes a function of type
int (*fn)(const char *, const unsigned char *, void *)
and a void pointer as parameters, and calls the function with
the name of the ref and its SHA-1 with the caller-supplied void
pointer as parameters.
The commit updates two callers, builtin-name-rev.c and
builtin-pack-refs.c as an example.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-tar-tree.c::git_tar_config() and http-push.c::add_one_object()
are not used outside their own files.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This abstracts away the size of the hash values when copying them
from memory location to memory location, much as the introduction
of hashcmp abstracted away hash value comparsion.
A few call sites were using char* rather than unsigned char* so
I added the cast rather than open hashcpy to be void*. This is a
reasonable tradeoff as most call sites already use unsigned char*
and the existing hashcmp is also declared to be unsigned char*.
[jc: Splitted the patch to "master" part, to be followed by a
patch for merge-recursive.c which is not in "master" yet.
Fixed the cast in the latter hunk to combine-diff.c which was
wrong in the original.
Also converted ones left-over in combine-diff.c, diff-lib.c and
upload-pack.c ]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Introduces global inline:
hashcmp(const unsigned char *sha1, const unsigned char *sha2)
Uses memcmp for comparison and returns the result based on the length of
the hash name (a future runtime decision).
Acked-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
WebDAV on Debian unstable cannot handle renames on WebDAV from
file.ext to newfile (without ext) when newfile* already
exists. Normally, git creates a file like 'objects/xx/sha1.token',
which is renamed to 'objects/xx/sha1' when transferred completely.
Just use '_' instead of '.' so WebDAV doesn't see it as an extension
change.
Signed-off-by: Rutger Nijlunsing <git@tux.tmfweb.nl>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Any git command that expects to work in a subdirectory of a project, and
that reads the git config files (which is just about all of them) needs to
make sure that it does the "setup_git_directory()" call before it tries to
read the config file.
This means, among other things, that we need to move the call out of
"init_revisions()", and into the caller.
This does the mostly trivial conversion to do that.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This updates the type-enumeration constants introduced to reduce
the memory footprint of "struct object" to match the type bits
already used in the packfile format, by removing the former
(i.e. TYPE_* constant macros) and using the latter (i.e. enum
object_type) throughout the code for consistency.
Eventually we can stop passing around the "type strings"
entirely, and this will help - no confusion about two different
integer enumeration.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the change in default, "git add ." on kernel dir is about
twice as fast as before, with only minimal (0.5%) change in
object size. The speed difference is even more noticeable
when committing large files, which is now up to 8 times faster.
The configurability is through setting core.compression = [-1..9]
which maps to the zlib constants; -1 is the default, 0 is no
compression, and 1..9 are various speed/size tradeoffs, 9
being slowest.
Signed-off-by: Joachim B Haga (cjhaga@fys.uio.no)
Acked-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the use of safe_strncpy() even more. Since it has the
same semantics as strlcpy() use this name instead. Also move the
definition from inside path.c to its own file compat/strlcpy.c, and use
it conditionally at compile time, since some platforms already has
strlcpy(). It's included in the same way as compat/setenv.c.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
ANSI C99 doesn't allow void-pointer arithmetic. This patch fixes this in
various ways. Usually the strategy that required the least changes was used.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We've had this notion of a "object_list" for a long time, which eventually
grew a "name" member because some users (notably git-rev-list) wanted to
name each object as it is generated.
That object_list is great for some things, but it isn't all that wonderful
for others, and the "name" member is generally not used by everybody.
This patch splits the users of the object_list array up into two: the
traditional list users, who want the list-like format, and who don't
actually use or want the name. And another class of users that really used
the list as an extensible array, and generally wanted to name the objects.
The patch is fairly straightforward, but it's also biggish. Most of it
really just cleans things up: switching the revision parsing and listing
over to the array makes things like the builtin-diff usage much simpler
(we now see exactly how many members the array has, and we don't get the
objects reversed from the order they were on the command line).
One of the main reasons for doing this at all is that the malloc overhead
of the simple object list was actually pretty high, and the array is just
a lot denser. So this patch brings down memory usage by git-rev-list by
just under 3% (on top of all the other memory use optimizations) on the
mozilla archive.
It does add more lines than it removes, and more importantly, it adds a
whole new infrastructure for maintaining lists of objects, but on the
other hand, the new dynamic array code is pretty obvious. The change to
builtin-diff-tree.c shows a fairly good example of why an array interface
is sometimes more natural, and just much simpler for everybody.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Though very nice and readable, the "case 'a'...'z':" construct is not ANSI C99
compliant. This patch unfolds the range in `quote.c' and substitutes the
switch-statement with an if-statement in `http-fetch.c' and `http-push.c'.
Signed-off-by: Florian Forster <octo@verplant.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This shrinks "struct object" by a small amount, by getting rid of the
"struct type *" pointer and replacing it with a 3-bit bitfield instead.
In addition, we merge the bitfields and the "flags" field, which
incidentally should also remove a useless 4-byte padding from the object
when in 64-bit mode.
Now, our "struct object" is still too damn large, but it's now less
obviously bloated, and of the remaining fields, only the "util" (which is
not used by most things) is clearly something that should be eventually
discarded.
This shrinks the "git-rev-list --all" memory use by about 2.5% on the
kernel archive (and, perhaps more importantly, on the larger mozilla
archive). That may not sound like much, but I suspect it's more on a
64-bit platform.
There are other remaining inefficiencies (the parent lists, for example,
probably have horrible malloc overhead), but this was pretty obvious.
Most of the patch is just changing the comparison of the "type" pointer
from one of the constant string pointers to the appropriate new TYPE_xxx
small integer constant.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This ifdef's out more functions that are not used while !USE_MULTI
in http code. Also the dependency of http related objects on http.h
header file was missing in the Makefile.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix broken build when USE_CURL_MULTI is not defined, as noted by Becky Bruce.
During cleanup, free header slist that was created during init, as noted
by Junio.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a "tree_entry()" function that combines the common operation of
doing a "tree_entry_extract()" + "update_tree_entry()".
It also has a simplified calling convention, designed for simple loops
that traverse over a whole tree: the arguments are pointers to the tree
descriptor and a name_entry structure to fill in, and it returns a boolean
"true" if there was an entry left to be gotten in the tree.
This allows tree traversal with
struct tree_desc desc;
struct name_entry entry;
desc.buf = tree->buffer;
desc.size = tree->size;
while (tree_entry(&desc, &entry) {
... use "entry.{path, sha1, mode, pathlen}" ...
}
which is not only shorter than writing it out in full, it's hopefully less
error prone too.
[ It's actually a tad faster too - we don't need to recalculate the entry
pathlength in both extract and update, but need to do it only once.
Also, some callers can avoid doing a "strlen()" on the result, since
it's returned as part of the name_entry structure.
However, by now we're talking just 1% speedup on "git-rev-list --objects
--all", and we're definitely at the point where tree walking is no
longer the issue any more. ]
NOTE! Not everybody wants to use this new helper function, since some of
the tree walkers very much on purpose do the descriptor update separately
from the entry extraction. So the "extract + update" sequence still
remains as the core sequence, this is just a simplified interface.
We should probably add a silly two-line inline helper function for
initializing the descriptor from the "struct tree" too, just to cut down
on the noise from that common "desc" initializer.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead, just use the tree buffer directly, and use the tree-walk
infrastructure to walk the buffers instead of the tree-entry list.
The tree-entry list is inefficient, and generates tons of small
allocations for no good reason. The tree-walk infrastructure is
generally no harder to use than following a linked list, and allows
us to do most tree parsing in-place.
Some programs still use the old tree-entry lists, and are a bit
painful to convert without major surgery. For them we have a helper
function that creates a temporary tree-entry list on demand.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is preparatory work for further cleanups, where we try to make
tree_entry look more like the more efficient tree-walk descriptor.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/logopt:
Fix "git log --stat": make sure to set recursive with --stat.
combine-diff: show diffstat with the first parent.
git.c: LOGSIZE is unused after log printing cleanup.
Log message printout cleanups (#3): fix --pretty=oneline
Log message printout cleanups (#2)
Log message printout cleanups
rev-list --header: output format fix
Fixes for option parsing
log/whatchanged/show - log formatting cleanup.
Simplify common default options setup for built-in log family.
Tentative built-in "git show"
Built-in git-whatchanged.
rev-list option parser fix.
Split init_revisions() out of setup_revisions()
Fix up rev-list option parsing.
Fix up default abbrev in setup_revisions() argument parser.
Common option parsing for "git log --diff" and friends
The boundary commits are shown for UI like gitk to draw them as
soon as topo-order sorting allows, and should not be omitted by
get_revision() filtering logic. As long as their immediate
child commits are shown, we should not filter them out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Merging all three option parsers related to whatchanged is
unarguably the right thing, but the fallout was too big to scare
me away. Let's try it once again, but once step at time.
This splits out init_revisions() call from setup_revisions(), so
that the callers can set different defaults to match the
traditional benaviour.
The rev-list command is still broken in a big way, which is the
topic of next step.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes things that include revision.h build again.
Blame is also built, but I am not sure how well it works (or how
well it worked to begin with) -- it was relying on tree-diff to
be using whatever pathspec was used the last time, which smells
a bit suspicious.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The parent rewriting feature caused us to create the whole history in one
go, and then simplify it later, because of how rewrite_parents() had been
written. However, with a little tweaking, it's perfectly possible to do
even that one incrementally.
Right now, this doesn't really much matter, because every user of
"--parents" will probably generally _also_ use "--topo-order", which will
cause the old non-incremental behaviour anyway. However, I'm hopeful that
we could make even the topological sort incremental, or at least
_partially_ so (for example, make it incremental up to the first merge).
In the meantime, this at least moves things in the right direction, and
removes a strange special case.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you write code after declarations in a block, gcc scolds you
with "warning: ISO C90 forbids mixed declarations and code".
Signed-off-by: Junio C Hamano <junkio@cox.net>
Declare remote_dir_exists[] as signed char to be sure that values of -1
are valid.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Processes new command-line arguments -d and -D to remove a remote branch
if the following conditions are met:
- one branch name is present on the command line
- the specified branch name matches exactly one remote branch name
- the remote HEAD is a symref
- the specified branch is not the remote HEAD
- the remote HEAD resolves to an object that exists locally (-d only)
- the specified branch resolves to an object that exists locally (-d only)
- the specified branch is an ancestor of the remote HEAD (-d only)
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
More consistent usage string, condense push output, remove extra slashes
in URLs, fix unused variables, include HTTP method name in failure
messages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If info/refs exists on the remote, get a lock on info/refs, make sure that
there is a local copy of the object referenced in each remote ref (in case
someone else added a tag we don't have locally), do all the refspec updates,
and generate and send an updated info/refs file.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace single-use functions with one that can get a list of remote
collections and pass file/directory information to user-defined functions
for processing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
