The point of this function is to drop an entry from the
"packed_git" cache that points to a file we might be
overwriting, because our contents may not be the same (and
hence the only caller was pack-objects as it moved a
temporary packfile into place).
In older versions of git, this could happen because the
names of packfiles were derived from the set of objects they
contained, not the actual bits on disk. But since 1190a1a
(pack-objects: name pack files after trailer hash,
2013-12-05), the name reflects the actual bits on disk, and
any two packfiles with the same name can be used
interchangeably.
Dropping this function not only saves a few lines of code,
it makes the lifetime of "struct packed_git" much easier to
reason about: namely, we now do not ever free these structs.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
General code clean-up around a helper function to write a
single-liner to a file.
* jk/write-file:
branch: use write_file_buf instead of write_file
use write_file_buf where applicable
write_file: add format attribute
write_file: add pointer+len variant
write_file: use xopen
write_file: drop "gently" form
branch: use non-gentle write_file for branch description
am: ignore return value of write_file()
config: fix bogus fd check when setting up default config
This gives us compile-time checking of our format strings,
which is a good thing.
I had also hoped it would help with confusing write_file()
and write_file_buf(), since the former's "..." can make it
match the signature of the latter. But given that the buffer
for write_file_buf() is generally not a string literal, the
compiler won't complain unless -Wformat-nonliteral is on,
and that creates a ton of false positives elsewhere in the
code base.
While we're there, let's also give the function a docstring,
which it never had.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are many callsites which could use write_file, but for
which it is a little awkward because they have a strbuf or
other pointer/len combo. Specifically:
1. write_file() takes a format string, so we have to use
"%s" or "%.*s", which are ugly.
2. Using any form of "%s" does not handle embedded NULs in
the output. That probably doesn't matter for our
call-sites, but it's nicer not to have to worry.
3. It's less efficient; we format into another strbuf
just to do the write. That's probably not measurably
slow for our uses, but it's simply inelegant.
We can fix this by providing a helper to write out the
formatted buffer, and just calling it from write_file().
Note that we don't do the usual "complete with a newline"
that write_file does. If the caller has their own buffer,
there's a reasonable chance they're doing something more
complicated than a single line, and they can call
strbuf_complete_line() themselves.
We could go even further and add strbuf_write_file(), but it
doesn't save much:
- write_file_buf(path, sb.buf, sb.len);
+ strbuf_write_file(&sb, path);
It would also be somewhat asymmetric with strbuf_read_file,
which actually returns errors rather than dying (and the
error handling is most of the benefit of write_file() in the
first place).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no callers left of write_file_gently(). Let's drop
it, as it doesn't seem likely for new callers to be added
(since its inception, the only callers who wanted the gentle
form generally just died immediately themselves, and have
since been converted).
While we're there, let's also drop the "int" return from
write_file, as it is never meaningful (in the non-gentle
form, we always either die or return 0).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"upload-pack" allows a custom "git pack-objects" replacement when
responding to "fetch/clone" via the uploadpack.packObjectsHook.
* jk/upload-pack-hook:
upload-pack: provide a hook for running pack-objects
t1308: do not get fooled by symbolic links to the source tree
config: add a notion of "scope"
config: return configset value for current_config_ functions
config: set up config_source for command-line config
git_config_parse_parameter: refactor cleanup code
git_config_with_options: drop "found" counting
This function works just like sha1_to_hex_r, except that it takes a
pointer to struct object_id instead of a pointer to unsigned char.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now the last caller of this function is gone, and new ones are
unlikely to appear, because this function is doing very little that
a regular if() does not besides obfuscating the error message (and
if we ever did want something like it, we would probably prefer the
function to come back with more "normal" return value semantics).
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The executable bit will not be detected (and therefore will not be
set) for paths in a repository with `core.filemode` set to false,
though the users may still wish to add files as executable for
compatibility with other users who _do_ have `core.filemode`
functionality. For example, Windows users adding shell scripts may
wish to add them as executable for compatibility with users on
non-Windows.
Although this can be done with a plumbing command
(`git update-index --add --chmod=+x foo`), teaching the `git-add`
command allows users to set a file executable with a command that
they're already familiar with.
Signed-off-by: Edward Thomson <ethomson@edwardthomson.com>
Helped-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A config callback passed to git_config() doesn't know very
much about the context in which it sees a variable. It can
ask whether the variable comes from a file, and get the file
name. But without analyzing the filename (which is hard to
do accurately), it cannot tell whether it is in system-level
config, user-level config, or repo-specific config.
Generally this doesn't matter; the point of not passing this
to the callback is that it should treat the config the same
no matter where it comes from. But some programs, like
upload-pack, are a special case: we should be able to run
them in an untrusted repository, which means we cannot use
any "dangerous" config from the repository config file (but
it is OK to use it from system or user config).
This patch teaches the config code to record the "scope" of
each variable, and make it available inside config
callbacks, similar to how we give access to the filename.
The scope is the starting source for a particular parsing
operation, and remains the same even if we include other
files (so a .git/config which includes another file will
remain CONFIG_SCOPE_REPO, as it would be similarly
untrusted).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 473166b (config: add 'origin_type' to config_source
struct, 2016-02-19) added accessor functions for the origin
type and name, it taught them only to look at the "cf"
struct that is filled in while we are parsing the config.
This is sufficient to make it work with git-config, which
uses git_config_with_options() under the hood. That function
freshly parses the config files and triggers the callback
when it parses each key.
Most git programs, however, use git_config(). This interface
will populate a cache during the actual parse, and then
serve values from the cache. Calling current_config_filename()
in a callback here will find a NULL cf and produce an error.
There are no such callers right now, but let's prepare for
adding some by making this work.
We already record source information in a struct attached to
each value. We just need to make it globally available and
then consult it from the accessor functions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
On Windows, .git and optionally any files whose name starts with a
dot are now marked as hidden, with a core.hideDotFiles knob to
customize this behaviour.
* js/windows-dotgit:
mingw: remove unnecessary definition
mingw: introduce the 'core.hideDotFiles' setting
A new configuration variable core.hooksPath allows customizing
where the hook directory is.
* ab/hooks:
hooks: allow customizing where the hook directory is
githooks.txt: minor improvements to the grammar & phrasing
githooks.txt: amend dangerous advice about 'update' hook ACL
githooks.txt: improve the intro section
On Unix (and Linux), files and directories whose names start with a dot
are usually not shown by default. This convention is used by Git: the
.git/ directory should be left alone by regular users, and only accessed
through Git itself.
On Windows, no such convention exists. Instead, there is an explicit flag
to mark files or directories as hidden.
In the early days, Git for Windows did not mark the .git/ directory (or
for that matter, any file or directory whose name starts with a dot)
hidden. This lead to quite a bit of confusion, and even loss of data.
Consequently, Git for Windows introduced the core.hideDotFiles setting,
with three possible values: true, false, and dotGitOnly, defaulting to
marking only the .git/ directory as hidden.
The rationale: users do not need to access .git/ directly, and indeed (as
was demonstrated) should not really see that directory, either. However,
not all dot files should be hidden by default, as e.g. Eclipse does not
show them (and the user would therefore be unable to see, say, a
.gitattributes file).
In over five years since the last attempt to bring this patch into core
Git, a slightly buggy version of this patch has served Git for Windows'
users well: no single report indicated problems with the hidden .git/
directory, and the stream of problems caused by the previously non-hidden
.git/ directory simply stopped. The bugs have been fixed during the
process of getting this patch upstream.
Note that there is a funny quirk we have to pay attention to when
creating hidden files: we use Win32's _wopen() function which
transmogrifies its arguments and hands off to Win32's CreateFile()
function. That latter function errors out with ERROR_ACCESS_DENIED (the
equivalent of EACCES) when the equivalent of the O_CREAT flag was passed
and the file attributes (including the hidden flag) do not match an
existing file's. And _wopen() accepts no parameter that would be
transmogrified into said hidden flag. Therefore, we simply try again
without O_CREAT.
A slightly different method is required for our fopen()/freopen()
function as we cannot even *remove* the implicit O_CREAT flag.
Therefore, we briefly mark existing files as unhidden when opening them
via fopen()/freopen().
The ERROR_ACCESS_DENIED error can also be triggered by opening a file
that is marked as a system file (which is unlikely to be tracked in
Git), and by trying to create a file that has *just* been deleted and is
awaiting the last open handles to be released (which would be handled
better by the "Try again?" logic, a story for a different patch series,
though). In both cases, it does not matter much if we try again without
the O_CREAT flag, read: it does not hurt, either.
For details how ERROR_ACCESS_DENIED can be triggered, see
https://msdn.microsoft.com/en-us/library/windows/desktop/aa363858
Original-patch-by: Erik Faye-Lund <kusmabite@gmail.com>
Initial-Test-By: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move from unsigned char[20] to struct object_id continues.
* bc/object-id:
match-trees: convert several leaf functions to use struct object_id
tree-walk: convert tree_entry_extract() to use struct object_id
struct name_entry: use struct object_id instead of unsigned char sha1[20]
match-trees: convert shift_tree() and shift_tree_by() to use object_id
test-match-trees: convert to use struct object_id
sha1-name: introduce a get_oid() function
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
These are mostly convenient functions to reduce code duplication. Most
of the time, we should be able to get by with git_path() which handles
$GIT_COMMON_DIR internally. However there are a few cases where we need
to construct paths manually, for example some paths from a specific
worktree. These functions will enable that.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Its last call site was replaced by mks_tempfile_ts() in 284098f (diff:
use tempfile module - 2015-08-12) and there's a good chance
mks_tempfile_ts will continue to successfully handle this job. Delete
it.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_oid() function is equivalent to the get_sha1() function, but
uses a struct object_id instead.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The repository set-up sequence has been streamlined (the biggest
change is that there is no longer git_config_early()), so that we
do not attempt to look into refs/* when we know we do not have a
Git repository.
* jk/check-repository-format:
verify_repository_format: mark messages for translation
setup: drop repository_format_version global
setup: unify repository version callbacks
init: use setup.c's repo version verification
setup: refactor repo format reading and verification
config: drop git_config_early
check_repository_format_gently: stop using git_config_early
lazily load core.sharedrepository
wrap shared_repository global in get/set accessors
setup: document check_repository_format()
Nobody reads this anymore, and they're not likely to; the
interesting thing is whether or not we passed
check_repository_format(), and possibly the individual
"extension" variables.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, check_repository_format_gently would parse
the config with a single callback, and that callback would
set up a bunch of global variables. But now that we have
separate workdirs, we have to be more careful. Commit
31e26eb (setup.c: support multi-checkout repo setup,
2014-11-30) introduced a reduced callback which omits some
values like core.worktree. In the "main" callback we call
the reduced one, and then add back in the missing variables.
Now that we have split the config-parsing from the munging
of the global variables, we can do it all with a single
callback, and keep all of the "are we in a separate workdir"
logic together.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we want to know if we're in a git repository of
reasonable vintage, we can call check_repository_format_gently(),
which does three things:
1. Reads the config from the .git/config file.
2. Verifies that the version info we read is sane.
3. Writes some global variables based on this.
There are a few things we could improve here.
One is that steps 1 and 3 happen together. So if the
verification in step 2 fails, we still clobber the global
variables. This is especially bad if we go on to try another
repository directory; we may end up with a state of mixed
config variables.
The second is there's no way to ask about the repository
version for anything besides the main repository we're in.
git-init wants to do this, and it's possible that we would
want to start doing so for submodules (e.g., to find out
which ref backend they're using).
We can improve both by splitting the first two steps into
separate functions. Now check_repository_format_gently()
calls out to steps 1 and 2, and does 3 only if step 2
succeeds.
Note that the public interface for read_repository_format()
and what check_repository_format_gently() needs from it are
not quite the same, leading us to have an extra
read_repository_format_1() helper. The extra needs from
check_repository_format_gently() will go away in a future
patch, and we can simplify this then to just the public
interface.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are no more callers, and it's a rather confusing
interface. This could just be folded into
git_config_with_options(), but for the sake of readability,
we'll leave it as a separate (static) helper function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It would be useful to control access to the global
shared_repository, so that we can lazily load its config.
The first step to doing so is to make sure all access
goes through a set of functions.
This step is purely mechanical, and should result in no
change of behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function's interface is rather enigmatic, so let's
document it further.
While we're here, let's also drop the return value. It will
always either be "0" or the function will die (consequently,
neither of its two callers bothered to check the return).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit a60645f (setup: remember whether repository was
found, 2010-08-05) introduced the startup_info structure,
which records some parts of the setup_git_directory()
process (notably, whether we actually found a repository or
not).
One of the uses of this data is for functions to behave
appropriately based on whether we are in a repo. But the
startup_info struct is just a pointer to storage provided by
the main program, and the only program that sets it up is
the git.c wrapper. Thus builtins have access to
startup_info, but externally linked programs do not.
Worse, library code which is accessible from both has to be
careful about accessing startup_info. This can be used to
trigger a die("BUG") via get_sha1():
$ git fast-import <<-\EOF
tag foo
from HEAD:./whatever
EOF
fatal: BUG: startup_info struct is not initialized.
Obviously that's fairly nonsensical input to feed to
fast-import, but we should never hit a die("BUG"). And there
may be other ways to trigger it if other non-builtins
resolve sha1s.
So let's point the storage for startup_info to a static
variable in setup.c, making it available to all users of the
library code. We _could_ turn startup_info into a regular
extern struct, but doing so would mean tweaking all of the
existing use sites. So let's leave the pointer indirection
in place. We can, however, drop any checks for NULL, as
they will always be false (and likewise, we can drop the
test covering this case, which was a rather artificial
situation using one of the test-* programs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to read the pack data using the offsets stored in the pack
idx file has been made more carefully check the validity of the
data in the idx.
* jk/pack-idx-corruption-safety:
sha1_file.c: mark strings for translation
use_pack: handle signed off_t overflow
nth_packed_object_offset: bounds-check extended offset
t5313: test bounds-checks of corrupted/malicious pack/idx files
Many codepaths forget to check return value from git_config_set();
the function is made to die() to make sure we do not proceed when
setting a configuration variable failed.
* ps/config-error:
config: rename git_config_set_or_die to git_config_set
config: rename git_config_set to git_config_set_gently
compat: die when unable to set core.precomposeunicode
sequencer: die on config error when saving replay opts
init-db: die on config errors when initializing empty repo
clone: die on config error in cmd_clone
remote: die on config error when manipulating remotes
remote: die on config error when setting/adding branches
remote: die on config error when setting URL
submodule--helper: die on config error when cloning module
submodule: die on config error when linking modules
branch: die on config error when editing branch description
branch: die on config error when unsetting upstream
branch: report errors in tracking branch setup
config: introduce set_or_die wrappers
The configuration system has been taught to phrase where it found a
bad configuration variable in a better way in its error messages.
"git config" learnt a new "--show-origin" option to indicate where
the values come from.
* ls/config-origin:
config: add '--show-origin' option to print the origin of a config value
config: add 'origin_type' to config_source struct
rename git_config_from_buf to git_config_from_mem
t: do not hide Git's exit code in tests using 'nul_to_q'
If a pack .idx file has a corrupted offset for an object, we
may try to access an offset in the .idx or .pack file that
is larger than the file's size. For the .pack case, we have
use_pack() to protect us, which realizes the access is out
of bounds. But if the corrupted value asks us to look in the
.idx file's secondary 64-bit offset table, we blindly add it
to the mmap'd index data and access arbitrary memory.
We can fix this with a simple bounds-check compared to the
size we found when we opened the .idx file.
Note that there's similar code in index-pack that is
triggered only during "index-pack --verify". To support
both, we pull the bounds-check into a separate function,
which dies when it sees a corrupted file.
It would be nice if we could return an error, so that the
pack code could try to find a good copy of the object
elsewhere. Currently nth_packed_object_offset doesn't have
any way to return an error, but it could probably use "0" as
a sentinel value (since no object can start there). This is
the minimal fix, and we can improve the resilience later on
top.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "v(iew)" subcommand of the interactive "git am -i" command was
broken in 2.6.0 timeframe when the command was rewritten in C.
* jc/am-i-v-fix:
am -i: fix "v"iew
pager: factor out a helper to prepare a child process to run the pager
pager: lose a separate argv[]
Rename git_config_set_or_die functions to git_config_set, leading
to the new default behavior of dying whenever a configuration
error occurs.
By now all callers that shall die on error have been transitioned
to the _or_die variants, thus making this patch a simple rename
of the functions.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The desired default behavior for `git_config_set` is to die
whenever an error occurs. Dying is the default for a lot of
internal functions when failures occur and is in this case the
right thing to do for most callers as otherwise we might run into
inconsistent repositories without noticing.
As some code may rely on the actual return values for
`git_config_set` we still require the ability to invoke these
functions without aborting. Rename the existing `git_config_set`
functions to `git_config_set_gently` to keep them available for
those callers.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the config origin_type to print more detailed error messages that
inform the user about the origin of a config error (file, stdin, blob).
Helped-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This matches the naming used in the index_{fd,mem,...} functions.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running a pager, we need to run the program git_pager() gave
us, but we need to make sure we spawn it via the shell (i.e. it is
valid to say PAGER='less -S', for example) and give default values
to $LESS and $LV environment variables. Factor out these details
to a separate helper function.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lot of call-sites for the existing family of `git_config_set`
functions do not check for errors that may occur, e.g. when the
configuration file is locked. In many cases we simply want to die
when such a situation arises.
Introduce wrappers that will cause the program to die in those
cases. These wrappers are temporary only to ease the transition
to let `git_config_set` die by default. They will be removed
later on when `git_config_set` itself has been replaced by
`git_config_set_gently`.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying machinery used by "ls-files -o" and other commands
have been taught not to create empty submodule ref cache for a
directory that is not a submodule. This removes a ton of wasted
CPU cycles.
* jk/ref-cache-non-repository-optim:
resolve_gitlink_ref: ignore non-repository paths
clean: make is_git_repository a public function
A few unportable C construct have been spotted by clang compiler
and have been fixed.
* jk/clang-pedantic:
bswap: add NO_UNALIGNED_LOADS define
avoid shifting signed integers 31 bits
The underlying machinery used by "ls-files -o" and other commands
have been taught not to create empty submodule ref cache for a
directory that is not a submodule. This removes a ton of wasted
CPU cycles.
* jk/ref-cache-non-repository-optim:
resolve_gitlink_ref: ignore non-repository paths
clean: make is_git_repository a public function
