This reverts commit 136c8c8b8f.
That commit was trying to address a bug caused by 4c7f1819b3
(make color.ui default to 'auto', 2013-06-10), in which
plumbing like diff-tree defaulted to "auto" color, but did
not respect a "color.ui" directive to disable it.
But it also meant that we started respecting "color.ui" set
to "always". This was a known problem, but 4c7f1819b3 argued
that nobody ought to be doing that. However, that turned out
to be wrong, and we got a number of bug reports related to
"add -p" regressing in v2.14.2.
Let's revert 136c8c8b8, fixing the regression to "add -p".
This leaves the problem from 4c7f1819b3 unfixed, but:
1. It's a pretty obscure problem in the first place. I
only noticed it while working on the color code, and we
haven't got a single bug report or complaint about it.
2. We can make a more moderate fix on top by respecting
"never" but not "always" for plumbing commands. This
is just the minimal fix to go back to the working state
we had before v2.14.2.
Note that this isn't a pure revert. We now have a test in
t3701 which shows off the "add -p" regression. This can be
flipped to success.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit c5bdfe677c.
That commit was done primarily to prepare for the weakening
of "always" in 6be4595edb (color: make "always" the same as
"auto" in config, 2017-10-03). But since we've now reverted
6be4595edb, there's no need for us to remove "-c
color.ui=always" from the tests. And in fact it's a good
idea to restore these tests, to make sure that "always"
continues to work.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6be4595edb.
That commit weakened the "always" setting of color config so
that it acted as "auto". This was meant to solve regressions
in v2.14.2 in which setting "color.ui=always" in the on-disk
config broke scripts like add--interactive, because the
plumbing diff commands began to generate color output.
This was due to 136c8c8b8f (color: check color.ui in
git_default_config(), 2017-07-13), which was in turn trying
to fix issues caused by 4c7f1819b3 (make color.ui default to
'auto', 2013-06-10). But in weakening "always", we created
even more problems, as people expect to be able to use "git
-c color.ui=always" to force color (especially because some
commands don't have their own --color flag). We can fix that
by special-casing the command-line "-c", but now things are
getting pretty confusing.
Instead of piling hacks upon hacks, let's start peeling off
the hacks. The first step is dropping the weakening of
"always", which this revert does.
Note that we could actually revert the whole series merged
in by da15b78e52. Most of that
series consists of preparations to the tests to handle the
weakening of "-c color.ui=always". But it's worth keeping
for a few reasons:
- there are some other preparatory cleanups, like
e433749d86 (test-terminal: set TERM=vt100, 2017-10-03)
- it adds "--color" options more consistently in
0c88bf5050 (provide --color option for all ref-filter
users, 2017-10-03)
- some of the cases dropping "-c" end up being more robust
and realistic tests, as in 01c94e9001 (t7508: use
test_terminal for color output, 2017-10-03)
- the preferred tool for overriding config is "--color",
and we should be modeling that consistently
We can individually revert the few commits necessary to
restore some useful tests (which will be done on top of this
patch).
Note that this isn't a pure revert; we'll keep the test
added in t3701, but mark it as failure for now.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jk/ui-color-always-to-auto-maint' (early part):
color: make "always" the same as "auto" in config
provide --color option for all ref-filter users
t3205: use --color instead of color.branch=always
t3203: drop "always" color test
t6006: drop "always" color config tests
t7502: use diff.noprefix for --verbose test
t7508: use test_terminal for color output
t3701: use test-terminal to collect color output
t4015: prefer --color to -c color.diff=always
test-terminal: set TERM=vt100
There are "git checkout [-p][<tree-ish>][--][<paths>...]" in the
SYNOPSIS section, and "git checkout [-p][<tree-ish>][--]<paths>..."
as the header for the section that explains the "check out paths
from index/tree-ish" mode. It is unclear if we require at least one
path, or it is entirely optional.
Actually, both are wrong. Without the "-p(atch)" option, you must
have <pathspec> (otherwise, with a commit that is a <tree-ish>, you
would be checking out that commit to build a new history on top of
it). With it, it is already clear that you are checking out paths,
it is optional. In other words, you cannot omit both.
The source of the confusion is that -p(atch) is described as if it
is just another "optional" part and its description is lumped
together with the non patch mode, even though the actual end user
experience is vastly different.
Let's split the entry into two, and describe the regular mode and
the patch mode separately. This allows us to make it clear that the
regular mode MUST be given at least one pathspec, that the patch
mode can be invoked with either '-p' or '--patch' but one of these
must be given, and that the pathspec is entirely optional in the
patch mode.
Also, revamp the explanation of "checkout paths" by removing
extraneous description at the beginning, that says "checking out
paths is not checking out a branch". Explaining what it is for and
when the user wants to use it upfront is the most direct way to help
the readers.
Noticed-by: Robert P J Day
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the flags for broken and dirty were implemented in
b0176ce6b5 (builtin/describe: introduce --broken flag, 2017-03-21)
and 9f67d2e827 (Teach "git describe" --dirty option, 2009-10-21)
the completion was not updated, although these flags are useful
completions. Add them.
Signed-off-by: Thomas Braun <thomas.braun@virtuell-zuhause.de>
Helped-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a caller of sha1_object_info_extended() sets the
"contentp" field in object_info, we call unpack_sha1_rest()
but do not check whether it signaled an error.
This causes two problems:
1. We pass back NULL to the caller via the contentp field,
but the function returns "0" for success. A caller
might reasonably expect after a successful return that
it can access contentp without a NULL check and
segfault.
As it happens, this is impossible to trigger in the
current code. There is exactly one caller which uses
contentp, read_object(). And the only thing it does
after a successful call is to return the content
pointer to its caller, using NULL as a sentinel for
errors. So in effect it converts the success code from
sha1_object_info_extended() back into an error!
But this is still worth addressing avoid problems for
future users of "contentp".
2. Callers of unpack_sha1_rest() are expected to close the
zlib stream themselves on error. Which means that we're
leaking the stream.
The problem in (1) comes from from c84a1f3ed4 (sha1_file:
refactor read_object, 2017-06-21), which added the contentp
field. Before that, we called unpack_sha1_rest() via
unpack_sha1_file(), which directly used the NULL to signal
an error.
But note that the leak in (2) is actually older than that.
The original unpack_sha1_file() directly returned the result
of unpack_sha1_rest() to its caller, when it should have
been closing the zlib stream itself on error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Reported-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lookup_blob() and lookup_tree() can return NULL if they find an object
of an unexpected type. Accessing the object member is undefined in that
case. Cast the result to a struct object pointer instead; we can do
that because object is the first member of all object types. This trick
is already used in other places in the code.
An error message is already shown by object_as_type(), which is called
by the lookup functions. The walk callback functions are expected to
handle NULL object pointers passed to them, but put_object_name() needs
a valid object, so avoid calling it without one.
Suggested-by: SZEDER Gábor <szeder.dev@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Peff points out that different atom parsers handle the empty
"sub-argument" list differently. An example of this is the format
"%(refname:)".
Since callers often use `string_list_split` (which splits the empty
string with any delimiter as a 1-ary string_list containing the empty
string), this makes handling empty sub-argument strings non-ergonomic.
Let's fix this by declaring that atom parser implementations must
not care about distinguishing between the empty string "%(refname:)"
and no sub-arguments "%(refname)". Current code aborts, either with
"unrecognised arg" (e.g. "refname:") or "does not take args"
(e.g. "body:") as an error message.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Reviewed-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
strbuf_release leaves the strbuf in a valid, initialized state, so
there is no need to call strbuf_init after it.
Moreover, this is not likely to change in the future: strbuf_release
leaving the strbuf in a valid state has been easy to maintain and has
been very helpful for Git's robustness and simplicity (e.g.,
preventing use-after-free vulnerabilities).
Document the semantics so the next generation of Git developers can
become familiar with them without reading the implementation. It is
still not advisable to call strbuf_release too often because it is
wasteful, so add a note pointing to strbuf_reset for that.
The same semantics apply to strbuf_detach. Add a similar note to its
docstring to make that clear.
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our documentation advises to not re-use a strbuf, after strbuf_release
has been called on it. Use the proper reset instead.
Currently 'strbuf_release' releases and re-initializes the strbuf, so it
is safe, but slow. 'strbuf_reset' only resets the internal length variable,
such that this could also be accounted for as a micro-optimization.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the argv is only allocated on the stack, and then assigned to
process->argv. When the start_subprocess function goes out of scope,
the local argv variable is eliminated from the stack, but the pointer is
still kept around in process->argv.
Much later when we try to access the same process->argv in
finish_command, this leads us to access a memory location that no longer
contains what we want. As argv0 is only used for printing errors, this
is not easily noticed in normal git operations. However when running
t0021-conversion.sh through valgrind, valgrind rightfully complains:
==21024== Invalid read of size 8
==21024== at 0x2ACF64: finish_command (run-command.c:869)
==21024== by 0x2D6B18: subprocess_exit_handler (sub-process.c:72)
==21024== by 0x2AB41E: cleanup_children (run-command.c:45)
==21024== by 0x2AB526: cleanup_children_on_exit (run-command.c:81)
==21024== by 0x54AD487: __run_exit_handlers (in /usr/lib/libc-2.26.so)
==21024== by 0x54AD4D9: exit (in /usr/lib/libc-2.26.so)
==21024== by 0x11A9EF: handle_builtin (git.c:550)
==21024== by 0x11ABCC: run_argv (git.c:602)
==21024== by 0x11AD8E: cmd_main (git.c:679)
==21024== by 0x1BF125: main (common-main.c:43)
==21024== Address 0x1ffeffec00 is on thread 1's stack
==21024== 1504 bytes below stack pointer
==21024==
These days, the child_process structure has its own args array, and
the standard way to set up its argv[] is to use that one, instead of
assigning to process->argv to point at an array that is outside.
Use that facility automatically fixes this issue.
Reported-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_oid_hex_from_objpath takes care of creating a oid from a
pathname. It does this by memcpy'ing the first two bytes of the path to
the "hex" string, then skipping the '/', and then copying the rest of the
path to the "hex" string. Currently it fails to increase the pointer to
the hex string, so the second memcpy invocation just mashes over what
was copied in the first one, and leaves the last two bytes in the string
uninitialized.
This breaks valgrind in t5540, although the test passes without
valgrind:
==5490== Use of uninitialised value of size 8
==5490== at 0x13C6B5: hexval (cache.h:1238)
==5490== by 0x13C6DB: hex2chr (cache.h:1247)
==5490== by 0x13C734: get_sha1_hex (hex.c:42)
==5490== by 0x13C78E: get_oid_hex (hex.c:53)
==5490== by 0x118BDA: get_oid_hex_from_objpath (http-push.c:1023)
==5490== by 0x118C92: process_ls_object (http-push.c:1038)
==5490== by 0x118E5B: handle_remote_ls_ctx (http-push.c:1077)
==5490== by 0x118227: xml_end_tag (http-push.c:815)
==5490== by 0x50C1448: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50C221B: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50BFBF2: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== by 0x50C0B24: ??? (in /usr/lib/libexpat.so.1.6.6)
==5490== Uninitialised value was created by a stack allocation
==5490== at 0x118B63: get_oid_hex_from_objpath (http-push.c:1012)
==5490==
Fix this by correctly incrementing the pointer to the "hex" variable, so
the first two bytes are left untouched by the memcpy call, and the last
two bytes are correctly initialized.
Signed-off-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cleanup_path we're passing in a char array, run a memcmp on it, and
run through it without ever checking if something is in the array in the
first place. This can lead us to access uninitialized memory, for
example in t5541-http-push-smart.sh test 7, when run under valgrind:
==4423== Conditional jump or move depends on uninitialised value(s)
==4423== at 0x242FA9: cleanup_path (path.c:35)
==4423== by 0x242FA9: mkpath (path.c:456)
==4423== by 0x256CC7: refname_match (refs.c:364)
==4423== by 0x26C181: count_refspec_match (remote.c:1015)
==4423== by 0x26C181: match_explicit_lhs (remote.c:1126)
==4423== by 0x26C181: check_push_refs (remote.c:1409)
==4423== by 0x2ABB4D: transport_push (transport.c:870)
==4423== by 0x186703: push_with_options (push.c:332)
==4423== by 0x18746D: do_push (push.c:409)
==4423== by 0x18746D: cmd_push (push.c:566)
==4423== by 0x1183E0: run_builtin (git.c:352)
==4423== by 0x11973E: handle_builtin (git.c:539)
==4423== by 0x11973E: run_argv (git.c:593)
==4423== by 0x11973E: main (git.c:698)
==4423== Uninitialised value was created by a heap allocation
==4423== at 0x4C2CD8F: malloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==4423== by 0x4C2F195: realloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
==4423== by 0x2C196B: xrealloc (wrapper.c:137)
==4423== by 0x29A30B: strbuf_grow (strbuf.c:66)
==4423== by 0x29A30B: strbuf_vaddf (strbuf.c:277)
==4423== by 0x242F9F: mkpath (path.c:454)
==4423== by 0x256CC7: refname_match (refs.c:364)
==4423== by 0x26C181: count_refspec_match (remote.c:1015)
==4423== by 0x26C181: match_explicit_lhs (remote.c:1126)
==4423== by 0x26C181: check_push_refs (remote.c:1409)
==4423== by 0x2ABB4D: transport_push (transport.c:870)
==4423== by 0x186703: push_with_options (push.c:332)
==4423== by 0x18746D: do_push (push.c:409)
==4423== by 0x18746D: cmd_push (push.c:566)
==4423== by 0x1183E0: run_builtin (git.c:352)
==4423== by 0x11973E: handle_builtin (git.c:539)
==4423== by 0x11973E: run_argv (git.c:593)
==4423== by 0x11973E: main (git.c:698)
==4423==
Avoid this by using skip_prefix(), which knows not to go beyond the
end of the string.
Reported-by: Thomas Gummerer <t.gummerer@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if the strbuf containing data to sort is empty before attempting
to trim a trailing newline character.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It can be handy to use `--color=always` (or it's synonym
`--color`) on the command-line to convince a command to
produce color even if it's stdout isn't going to the
terminal or a pager.
What's less clear is whether it makes sense to set config
variables like color.ui to `always`. For a one-shot like:
git -c color.ui=always ...
it's potentially useful (especially if the command doesn't
directly support the `--color` option). But setting `always`
in your on-disk config is much muddier, as you may be
surprised when piped commands generate colors (and send them
to whatever is consuming the pipe downstream).
Some people have done this anyway, because:
1. The documentation for color.ui makes it sound like
using `always` is a good idea, when you almost
certainly want `auto`.
2. Traditionally not every command (and especially not
plumbing) respected color.ui in the first place. So
the confusion came up less frequently than it might
have.
The situation changed in 136c8c8b8f (color: check color.ui
in git_default_config(), 2017-07-13), which negated point
(2): now scripts using only plumbing commands (like
add-interactive) are broken by this setting.
That commit was fixing real issues (e.g., by making
`color.ui=never` work, since `auto` is the default), so we
don't want to just revert it. We could turn `always` into a
noop in plumbing commands, but that creates a hard-to-explain
inconsistency between the plumbing and other commands.
Instead, let's just turn `always` into `auto` for all config.
This does break the "one-shot" config shown above, but again,
we're probably better to have simple and consistent rules than
to try to special-case command-line config.
There is one place where `always` should retain its meaning:
on the command line, `--color=always` should continue to be
the same as `--color`, overriding any isatty checks. Since the
command-line parser also depends on git_config_colorbool(), we
can use the existence of the "var" string to deterine whether
we are serving the command-line or the config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When ref-filter learned about want_color() in 11b087adfd
(ref-filter: consult want_color() before emitting colors,
2017-07-13), it became useful to be able to turn colors off
and on for specific commands. For git-branch, you can do so
with --color/--no-color.
But for git-for-each-ref and git-tag, the other users of
ref-filter, you have no option except to tweak the
"color.ui" config setting. Let's give both of these commands
the usual color command-line options.
This is a bit more obvious as a method for overriding the
config. And it also prepares us for the behavior of "always"
changing (so that we are still left with a way of forcing
color when our output goes to a non-terminal).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To test the color output, we must convince "git branch" to
write colors to a non-terminal. We do that now by setting
the color config to "always". In preparation for the
behavior of "always" changing, let's switch to using the
"--color" command-line option, which is more direct.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the behavior of "always" changing to
match "auto", we can simply drop this test. We already check
other forms (like "--color") independently.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We test the %C() format placeholders with a variety of
color-inducing options, including "--color" and
"-c color.ui=always". In preparation for the behavior of
"always" changing, we need to do something with those
"always" tests.
We can drop ones that expect "always" to turn on color even
to a file, as that will become a synonym for "auto", which
is already tested.
For the "--no-color" test, we need to make sure that color
would otherwise be shown. To do this, we can use
test_terminal, which enables colors in the default setup.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To check that "status -v" respects diff config, we set
"color.diff" and look at the output of "status". We could
equally well use any diff config. Since color output depends
on a lot of other factors (like whether stdout is a tty, and
how we interpret "always"), let's use a more mundane option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script tests the output of status with various formats
when color is enabled. It uses the "always" setting so that
the output is valid even though we capture it in a file.
Using test_terminal gives us a more realistic environment,
and prepares us for the behavior of "always" changing.
Arguably we are testing less than before, since "auto" is
already the default, and we can no longer tell if the config
is actually doing anything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When testing whether "add -p" can generate colors, we set
color.ui to "always". This isn't a very good test, as in the
real-world a user typically has "auto" coupled with stdout
going to a terminal (and it's plausible that this could mask
a real bug in add--interactive if we depend on plumbing's
isatty check).
Let's switch to test_terminal, which gives us a more
realistic environment. This also prepare us for future
changes to the "always" color option.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t4015 contains many color-related tests which need to
override the "is stdout a tty" check. They do so by setting
the color.diff config, but we can accomplish the same with
the --color option. Besides being shorter to type, switching
will prepare us for upcoming changes to "always" when see it
in config.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of the test-terminal script is to simulate in the
test scripts an environment where output is going to a real
terminal.
But since test-lib.sh also sets TERM=dumb, the simulation
isn't very realistic. The color code will skip auto-coloring
for TERM=dumb, leading to us liberally sprinkling
test_terminal env TERM=vt100 git ...
through the test suite to convince the tests to actually
generate colors. Let's set TERM for programs run under
test_terminal, which is one less thing for test-writers to
remember.
In most cases the callers can be simplified, but note there
is one interesting case in t4202. It uses test_terminal to
check the auto-enabling of --decorate, but the expected
output _doesn't_ contain colors (because TERM=dumb
suppresses them). Using TERM=vt100 is closer to what the
real world looks like; adjust the expected output to match.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Of the many ways to spell the three-letter word, the variant "Git"
should be used when referring to a repository in a description; or, in
general, when it is used as a proper noun.
We thus change the pull-request template message so that it reads
"...in the Git repository at:"
Besides, this brings us in line with the documentation, see
Documentation/howto/using-signed-tag-in-pull-request.txt
Signed-off-by: Ann T Ropea <bedhanger@gmx.de>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the macro ALLOC_ARRAY to allocate an array. This is shorter and
easier, as it automatically infers the size of elements.
Patch generated with Coccinelle and contrib/coccinelle/array.cocci.
Signeg-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
lookup_blob() etc. can return NULL if the referenced object isn't of the
expected type. In theory it's wrong to reference the object member in
that case. In practice it's OK because it's located at offset 0 for all
types, so the pointer arithmetic (NULL + 0) is optimized out by the
compiler. The issue is reported by Clang's AddressSanitizer, though.
Avoid the ASan error by casting the results of the lookup functions to
struct object pointers. That works fine with NULL pointers as well. We
already rely on the object member being first in all object types in
other places in the code.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Transformations that hide multiplications can end up with an pair of
parentheses that is no longer needed. E.g. with a rule like this:
@@
expression E;
@@
- E * 2
+ double(E)
... we might get a patch like this:
- x = (a + b) * 2;
+ x = double((a + b));
Add a pair of parentheses to the preimage side of such rules.
Coccinelle will generate patches that remove them if they are present,
and it will still match expressions that lack them.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match what is done to pfd[i].revents when compute_revents() returns
0 to the upstream gnulib's commit d42461c3 ("poll: fixes for large
fds", 2015-02-20). The revents field is set to 0, without
incrementing the value rc to be returned from the function. The
original code left the field to whatever random value the field was
initialized to.
This fixes occasional hangs in git-upload-pack on HPE NonStop.
Signed-off-by: Randall S. Becker <randall.becker@nexbridge.ca>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leaving spaces around the `-delimeters for commands means asciidoc fails
to parse them as the start of a literal string. Remove an extraneous
space that is causing a literal to not be formatted as such.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org>
Acked-by: Andreas Heiduk <asheiduk@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a candidate HEAD isn't a symref, we check that it
contains a viable sha1. But in a post-sha1 world, we should
be checking whether it has any plausible object-id.
We can do that by switching to get_oid_hex().
Note that both before and after this patch, we only check
for a plausible object id at the start of the file, and then
call that good enough. We ignore any content _after_ the
hex, so a string like:
0123456789012345678901234567890123456789 foo
is accepted. Though we do put extra bytes like this into
some pseudorefs (e.g., FETCH_HEAD), we don't typically do so
with HEAD. We could tighten this up by using parse_oid_hex(),
like:
if (!parse_oid_hex(buffer, &oid, &end) &&
*end++ == '\n' && *end == '\0')
return 0;
But we're probably better to remain on the loose side. We're
just checking here for a plausible-looking repository
directory, so heuristics are acceptable (if we really want
to be meticulous, we should use the actual ref code to parse
HEAD).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the previous commit guarantees that our symref buffer
is NUL-terminated, we can just use skip_prefix() and friends
to parse it. This is shorter and saves us having to deal
with magic numbers and keeping the "len" counter up to date.
While we're at it, let's name the rather obscure "buf" to
"refname", since that is the thing we are parsing with it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are checking to see if we have a git repo, we peek
into the HEAD file and see if it's a plausible symlink,
symref, or detached HEAD.
For the latter two, we read the contents with read_in_full(),
which means they aren't NUL-terminated. The symref check is
careful to respect the length we got, but the sha1 check
will happily parse up to 40 bytes, even if we read fewer.
E.g.,:
echo 1234 >.git/HEAD
git rev-parse
will parse 36 uninitialized bytes from our stack buffer.
This isn't a big deal in practice. Our buffer is 256 bytes,
so we know we'll never read outside of it. The worst case is
that the uninitialized bytes look like valid hex, and we
claim a bogus HEAD file is valid. The chances of this
happening randomly are quite slim, but let's be careful.
One option would be to check that "len == 41" before feeding
the buffer to get_sha1_hex(). But we'd like to eventually
prepare for a world with variable-length hashes. Let's
NUL-terminate as soon as we've read the buffer (we already
even leave a spare byte to do so!). That fixes this problem
without depending on the size of an object id.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The ability to exclude paths with a negative pathspec is not mentioned
in the man pages for git grep and other commands where it might be
useful.
Add an example and a pointer to the pathspec glossary entry in the man
page for git grep to help the user to discover this ability.
Add similar pointers from the git-add and git-status man pages.
Additionally,
- Add a test for the behaviour when multiple exclusions are present.
- Add a test for the ^ alias.
- Improve name of existing test.
- Improve grammar in glossary description of the exclude pathspec.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Manav Rathi <mnvrth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
References to multi-word configuration variable names in our
documentation must consistently use camelCase to highlight where
the word boundaries are, even though these are treated case
insensitively.
Fix a few places that spell them in all lowercase, which makes
them harder to read.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of `-Xours` merge option has a parenthetical note
that tells the readers that it is very different from `-s ours`,
which is correct, but the description of `-Xtheirs` that follows it
carelessly says "this is the opposite of `ours`", giving a false
impression that the readers also need to be warned that it is very
different from `-s theirs`, which in reality does not even exist.
Clarify it a bit to avoid misleading readers.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Decode =XY in quoted-printable segments only if X and Y are hexadecimal
digits, otherwise just copy them. That's at least better than
interpreting negative results from hexval() as a character.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current HTML header regexp doesn't match headers without attributes.
So it fails to match <h1>...</h1>, while <h1 class="smth">...</h1> matches.
Make attributes optional to fix this. The regexp is still far from
perfect, but now it at least handles the common case.
Signed-off-by: Ilya Kantor <iliakan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-read-tree manpage has a table that is meant to
be shown with its spacing exactly as it is in the source. We
mark it as a "literal paragraph" by indenting each line by
at least one space. This renders OK with asciidoc for both
the HTML and manpage versions.
But there are two problems when we render it with
asciidoctor.
The first is that some lines mix tabs and spaces. Even if
asciidoctor is correctly configured for 8-space tabs, it
seems to handle this case differently, soaking up some of
the initial literal-paragraph spaces and mis-aligning the
table text.
The second problem is that the table uses blank lines to
group rows. But as blank lines separate paragraphs in
asciidoc, this actually means that each chunk of the table
is rendered in its own pre-formatted <div> block. This
happens even with vanilla asciidoc, but there's no visible
result because the literal paragraphs aren't styled in any
special way. But with asciidoctor (or at least the styles
used on git-scm.com), literal paragraphs are styled with a
different background. This breaks the table into a visually
distracting sequence of chunks.
We can fix both by adding a literal-paragraph block
delimiter. That turns the whole table into a single block
(for both implementations) and causes asciidoctor to render
the indentation as it is in the source.
Reported-at: https://github.com/git/git-scm.com/issues/1023
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
