Commit 24ab81a fixed the deletion of empty files, but broke
deletion of non-empty files. The approach it took was to
factor out the "deleted" line from the patch header into its
own hunk, the same way we do for mode changes. However,
unlike mode changes, we only showed the special "delete this
file" hunk if there were no other hunks. Otherwise, the user
would annoyingly be presented with _two_ hunks: one for
deleting the file and one for deleting the content.
This meant that in the non-empty case, we forgot about the
deleted line entirely, and we submitted a bogus patch to
git-apply (with "/dev/null" as the destination file, but not
marked as a deletion).
Instead, this patch combines the file deletion hunk and the
content deletion hunk (if there is one) into a single
deletion hunk which is either staged or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/editor-pager:
Provide a build time default-pager setting
Provide a build time default-editor setting
am -i, git-svn: use "git var GIT_PAGER"
add -i, send-email, svn, p4, etc: use "git var GIT_EDITOR"
Teach git var about GIT_PAGER
Teach git var about GIT_EDITOR
Suppress warnings from "git var -l"
Do not use VISUAL editor on dumb terminals
Handle more shell metacharacters in editor names
Use the new "git var GIT_EDITOR" feature to decide what editor to
use, instead of duplicating its logic elsewhere. This should make
the behavior of commands in edge cases (e.g., editor names with
spaces) a little more consistent.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually we show deletion as a big hunk deleting all of the
file's text. However, for files with no content, the diff
shows just the 'deleted file mode ...' line. This patch
cause "add -p" (and related commands) to recognize that line
and explicitly ask about deleting the file.
We only add the "stage this deletion" hunk for empty files,
since other files will already ask about the big content
deletion hunk. We could also change those files to simply
display "stage this deletion", but showing the actual
deleted content is probably what an interactive user wants.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make "git add -p" to not skip files that are in index even if they are
excluded (by .gitignore etc.). This fixes the contradictory behavior
that "git status" and "git commit -a" listed such files as modified, but
"git add -p FILENAME" ignored them.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/reset-checkout-patch:
stash: simplify defaulting to "save" and reject unknown options
Make test case number unique
tests: disable interactive hunk selection tests if perl is not available
DWIM 'git stash save -p' for 'git stash -p'
Implement 'git stash save --patch'
Implement 'git checkout --patch'
Implement 'git reset --patch'
builtin-add: refactor the meat of interactive_add()
Add a small patch-mode testing library
git-apply--interactive: Refactor patch mode code
Make 'git stash -k' a short form for 'git stash save --keep-index'
This adds a hunk-based mode to git-stash. You can select hunks from
the difference between HEAD and worktree, and git-stash will build a
stash that reflects these changes. The index state of the stash is
the same as your current index, and we also let --patch imply
--keep-index.
Note that because the selected hunks are rolled back from the worktree
but not the index, the resulting state may appear somewhat confusing
if you had also staged these changes. This is not entirely
satisfactory, but due to the way stashes are applied, other solutions
would require a change to the stash format.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-checkout. In the index usage
git checkout --patch -- [files...]
it lets the user discard edits from the <files> at the granularity of
hunks (by selecting hunks from 'git diff' and then reverse applying
them to the worktree).
We also accept a revision argument. In the case
git checkout --patch HEAD -- [files...]
we offer hunks from the difference between HEAD and the worktree, and
reverse applies them to both index and worktree, allowing you to
discard staged changes completely. In the non-HEAD usage
git checkout --patch <revision> -- [files...]
it offers hunks from the difference between the worktree and
<revision>. The chosen hunks are then applied to both index and
worktree.
The application to worktree and index is done "atomically" in the
sense that we first check if the patch applies to the index (it should
always apply to the worktree). If it does not, we give the user a
choice to either abort or apply to the worktree anyway.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces a --patch mode for git-reset. The basic case is
git reset --patch -- [files...]
which acts as the opposite of 'git add --patch -- [files...]': it
offers hunks for *un*staging. Advanced usage is
git reset --patch <revision> -- [files...]
which offers hunks from the diff between the index and <revision> for
forward application to the index. (That is, the basic case is just
<revision> = HEAD.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 0392513 (add-interactive: refactor mode hunk handling, 2009-04-16),
we merged the interaction loops for mode changes and hunk staging.
This was fine at the time, because 0beee4c (git-add--interactive:
remove hunk coalescing, 2008-07-02) removed hunk coalescing.
However, in 7a26e65 (Revert "git-add--interactive: remove hunk
coalescing", 2009-05-16), we resurrected it. Since then, the code
would attempt in vain to merge mode changes with diff hunks,
corrupting both in the process.
We add a check to the coalescing loop to ensure it only looks at diff
hunks, thus skipping mode changes.
Noticed-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes some aspects of the 'git add -p' loop configurable (within
the code), so that we can later reuse git-add--interactive for other
similar tools.
Most fields are fairly straightforward, but APPLY gets a subroutine
(instead of just a string a la 'apply --cached') so that we can handle
'checkout -p', which will need to atomically apply the patch twice
(index and worktree).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a debugging print that snuck in at 7a26e65 (Revert
"git-add--interactive: remove hunk coalescing", 2009-05-16).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 0beee4c6de but with a
bit of twist, as we have added "edit hunk manually" hack and we cannot
rely on the original line numbers of the hunks that were manually edited.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cbd3a01 added a new "q" subcommand to the "git add -p"
command loop, but forgot to add it to the prompt.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original implementation considered the mode separately
from the rest of the hunks, asking about it outside the main
hunk-selection loop. This patch instead places a mode change
as the first hunk in the loop. This has two advantages:
1. less duplicated code (since we use the main selection
loop). This also cleans up an inconsistency, which is
that the main selection loop separates options with a
comma, whereas the mode prompt used slashes.
2. users can now skip the mode change and come back to it,
search for it (via "/mode"), etc, as they can with other
hunks.
To facilitate this, each hunk is now marked with a "type".
Mode hunks are not considered for splitting (which would
make no sense, and also confuses the split_hunk function),
nor are they editable. In theory, one could edit the mode
lines and change to a new mode. In practice, there are only
two modes that git cares about (0644 and 0755), so either
you want to move from one to the other or not (and you can
do that by staging or not staging).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's already 'd' to stop staging hunks in a file, but no explicit
command to stop the interactive staging (for the current files and the
remaining ones). Of course you can do 'd' and then ^C, but it would be
more intuitive to allow 'quit' action.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original implementation considered the mode separately
from the rest of the hunks, asking about it outside the main
hunk-selection loop. This patch instead places a mode change
as the first hunk in the loop. This has two advantages:
1. less duplicated code (since we use the main selection
loop). This also cleans up an inconsistency, which is
that the main selection loop separates options with a
comma, whereas the mode prompt used slashes.
2. users can now skip the mode change and come back to it,
search for it (via "/mode"), etc, as they can with other
hunks.
To facilitate this, each hunk is now marked with a "type".
Mode hunks are not considered for splitting (which would
make no sense, and also confuses the split_hunk function),
nor are they editable. In theory, one could edit the mode
lines and change to a new mode. In practice, there are only
two modes that git cares about (0644 and 0755), so either
you want to move from one to the other or not (and you can
do that by staging or not staging).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's already 'd' to stop staging hunks in a file, but no explicit
command to stop the interactive staging (for the current files and the
remaining ones). Of course you can do 'd' and then ^C, but it would be
more intuitive to allow 'quit' action.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The underlying plumbing commands are not run with -z option, so the paths
returned from them need to be unquoted as needed.
Remove the now stale BUGS section from git-add documentaiton as suggested
by Teemu Likonen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Similar to the behaviour for editing a commit message, let terminating
the editor with a failure abort the current hunk edit and revisit the
option selection for the hunk.
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After invoking git add -p I always got the warnings:
Use of uninitialized value $_[3] in exec at Git.pm line 1282.
Use of uninitialized value $args[2] in join or string at Git.pm line 1264.
A bisect showed that these warnings occur in a301973 "add -p: print errors
in separate color" the first time.
They can be reproduced by setting color.ui (or color.interactive) to "auto"
and unsetting color.interactive.help and color.interactive.error.
I am using Perl 5.10.0.
The reason of the warning is that color.interactive.error defaults to
color.interactive.help which defaults to nothing in the specific codepath.
It defaults to 'red bold' some lines above which could lead to the wrong
assumption that it always defaults to 'red bold' now.
This patch lets it default to 'red bold', blowing the warnings away.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Acked-By: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
eval{use...} is no good because the 'use' is evaluated at compile
time, so manually 'require' it. We need to forward declare the
functions we use, otherwise Perl raises a compilation error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print interaction error messages in color.interactive.error, which
defaults to the value of color.interactive.help.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use Term::ReadKey, if available and enabled with interactive.singlekey,
to let the user answer add -p's prompts by pressing a single key. We're
not doing the same in the main 'add -i' interface because file selection
etc. may expect several characters.
Two commands take an argument: 'g' can easily cope since it'll just
offer a choice of chunks. '/' now (unconditionally, even without
readkey) offers a chance to enter a regex if none was given.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user hit Ctrl-D (EOF) while the script was in 'go to hunk?'
mode, it threw an undefined variable error. Explicitly test for EOF
and have it re-enter the goto prompt loop.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
57886bc (git-add -i/-p: Change prompt separater from slash to comma,
2008-11-27) changed the prompt separator to ',', but forgot to adapt
the 'g' (goto) command.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of printing the help menu, this will print "No next hunk" and then
process the given hunk again.
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command allows the user to skip hunks that don't match the specified
regex.
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise the find command '/' soon to be introduced will be hard to see.
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a minor change is made while the working directory is in a bit of a
mess, it is somewhat difficult to wade through all of the hunks using git
add --patch. This allows one to jump to the hunk that needs to be staged
without having to respond 'n' to each preceding hunk.
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit implements a rather simple-minded mechanism to display a
one-line summary of the hunks in an array ref. The display consists of
the line numbers and the first changed line, truncated to 80 characters.
20 lines are displayed at a time, and the index of the first undisplayed
line is returned, allowing the caller to display more if desired. (The 20
and 80 should be made configurable.)
Signed-off-by: William Pursell <bill.pursell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current 'git add -p' will say "No changes." if there are no changes to
text files, which can be confusing if there _are_ changes to binary
files. Add some code to distinguish the two cases, and give a
different message in the latter one.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/win:
We need to check for msys as well as Windows in add--interactive.
Convert CR/LF to LF in tag signatures
Fixed text file auto-detection: treat EOF character 032 at the end of file as printable
git-add -i ranges expect number-number. But for the supremely lazy, typing in
that second number when selecting "from patch 7 to the end" is wasted effort.
So treat an empty second number in a range as "until the last item".
Signed-off-by: Ciaran McCreesh <ciaran.mccreesh@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adds a new option 'e' to the 'add -p' command loop that lets you edit
the current hunk in your favourite editor.
If the resulting patch applies cleanly, the edited hunk will
immediately be marked for staging. If it does not apply cleanly, you
will be given an opportunity to edit again. If all lines of the hunk
are removed, then the edit is aborted and the hunk is left unchanged.
Applying the changed hunk(s) relies on Johannes Schindelin's new
--recount option for git-apply.
Note that the "real patch" test intentionally uses
(echo e; echo n; echo d) | git add -p
even though the 'n' and 'd' are superfluous at first sight. They
serve to get out of the interaction loop if git add -p wrongly
concludes the patch does not apply.
Many thanks to Jeff King <peff@peff.net> for lots of help and
suggestions.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current git-apply has no trouble at all applying chunks that have
overlapping context, as produced by the splitting feature. So we can
drop the manual coalescing.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We recounted the postimage offsets to compensate for hunks that were
not selected. Now apply --recount can do the job for us.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the 'p'atch command, instead of just throwing out any mode
change, present it to the user in the same way that we show hunks.
This way, the mode change can be staged independently from the changes
to the contents.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a path is examined in the patch subcommand, any mode changes in
the file are given to use in the diff header by git-diff. If no hunks
are staged, then we throw out that header and do not touch the
path. But if _any_ hunks are staged, we use the header, and the mode
is changed together with the contents.
Since the 'p'atch command should just be dealing with hunks that are
shown to the user, it makes sense to just ignore mode changes
entirely. We do squirrel away the mode, though, since the next patch
will allow users to select the mode update separately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
