The need for "--" in the git-log synopsis was previously unclear and
confusing. This patch makes it a little clearer.
Thanks to hyy <yiyihu@gmail.com> for his help.
[sp: Changed -- to \-- per prior commit e1ccf53.]
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION
also mentions "<path>..." and says the specified "paths" (note plural)
are used for $whatever. This fixes the obvious mismatches.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the "This manual page describes only the most frequently used options."
text with the list of rev-list options in git-log manpage. (The git-diff-tree
options are already included.)
Move these options to a separate file and include it from both
git-rev-list.txt and git-log.txt.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --walk-reflogs logic and the --reverse logic are completely
incompatible with one another. Attempting to use both at the same
time leads to confusing results that sometimes violates the user's
formatting options or ignores the user's request to see the reflog
message and timestamp.
Unfortunately the implementation of both of these features is glued
onto the side of the revision walking machinary in such a way that
they are probably not going to be easy to make them compatible with
each other. Rather than offering the user confusing results we are
better off bailing out with an error message until such a time as
the implementations can be refactored to be compatible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option git-log prints log message size
just before the corresponding message.
Porcelain tools could use this to speedup parsing
of git-log output.
Note that size refers to log message only. If also
patch content is shown its size is not included.
In case it is not possible to know the size upfront
size value is set to zero.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After vainly searching the Documentation for how to follow renames, I
finally broke down and grepped the source. It would appear that Linus
didn't add write and docs for this feature when he wrote it. The
following patch rectifies that, hopefully sparing future users from
resorting to the source code.
Signed-off-by: Steven Walter <stevenrwalter@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Based on description of commit 477f2b4131
"git log --full-diff" adding this option.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split description of pretty formats into list of pretty options
(--pretty and --encoding) in new file Documentation/pretty-options.txt
and description of formats itself as a separate "PRETTY FORMATS"
section in pretty-formats.txt
While at it correct formatting a bit, to be better laid out in the
resulting manpages: git-rev-list(1), git-show(1), git-log(1) and
git-diff-tree(1). Those manpages now include pretty options in the
same place as it was before, and description of formats just after
all options.
Inspired by the split into two filesdocumentation for merge strategies:
Documentation/merge-options.txt and Documentation/merge-strategies.txt
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The revision specification syntax (sometimes referred to as
SHA1-expressions) is accepted almost everywhere in Git by
almost every tool. Unfortunately it is only documented in
git-rev-parse.txt, and most users don't know to look there.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We say "this shows only the most often used ones"; so instead of
teaching --max-number=<n> form, list -<n> form which is much
easier to type.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Asciidoc-include it into the manuals for programs that use the
--pretty command-line option, for consistency among the docs.
This describes all the pretty-formats currently listed in the cmit_fmt
enum in commit.h, and also briefly describes the presence and format
of the 'Merge: ' line in some pretty formats.
There's a hedge that limiting your view of history can affect what
goes in the Merge: line, and that --abbrev/--no-abbrev do nothing to
the 'raw' format.
Signed-off-by: Chris Riddoch <chris@syntacticsugar.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A bare "--" doesn't show up in man or html pages correctly
as two individual dashes unless backslashed as \--
in the asciidoc source. Note, no backslash is needed
inside a literal block.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I don't think people really follow the links or think very abstractly at
all in the first place.
So I was thinking more of some explicit examples. I actually think every
command should have an example in the man-page, and hey, here's a patch to
start things off.
Of course, I'm not exactly "Mr Documentation", and I don't know that this
is the prettiest way to do this, but I checked that the resulting html and
man-page seems at least reasonable.
And hey, if the examples look like each other, that's just because I'm
also not "Mr Imagination".
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The synopsis of the manpages should use the hyphenated version of the git
commands. Adapt the remaining offenders.
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07 17:45:20 -07:00
Renamed from Documentation/git-log-script.txt (Browse further)
