* mg/rev-list-n-parents:
tests: avoid nonportable {foo,bar} glob
rev-list --min-parents,--max-parents: doc, test and completion
revision.c: introduce --min-parents and --max-parents options
t6009: use test_commit() from test-lib.sh
Introduce --min-parents and --max-parents options which limit the
revisions to those commits which have at least (or at most) that many
commits, where negative arguments for --max-parents= denote infinity
(i.e. no upper limit).
In particular:
--max-parents=1 is the same as --no-merges;
--min-parents=2 is the same as --merges;
--max-parents=0 shows only roots; and
--min-parents=3 shows only octopus merges
Using --min-parents=n and --max-parents=m with n>m gives you what you ask
for (i.e. nothing) for obvious reasons, just like when you give --merges
(show only merge commits) and --no-merges (show only non-merge commits) at
the same time.
Also, introduce --no-min-parents and --no-max-parents to do the obvious
thing for convenience.
We compute the number of parents only when we limit by that, so there
is no performance impact when there are no limiters.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/rev-list-one-side-only:
git-log: put space after commit mark
t6007: test rev-list --cherry
log --cherry: a synonym
rev-list: documentation and test for --cherry-mark
revision.c: introduce --cherry-mark
rev-list/log: factor out revision mark generation
rev-list: --left/right-only are mutually exclusive
rev-list: documentation and test for --left/right-only
t6007: Make sure we test --cherry-pick
revlist.c: introduce --left/right-only for unsymmetric picking
Currently, commit marks (left, right, boundary, cherry) are output right
before the commit sha1, which makes it difficult to copy sha1s. Sample
output for "git log --oneline --cherry":
=049c269 t6007: test rev-list --cherry
Change this to
= 049c269 t6007: test rev-list --cherry
which matches exactly the current output of "git log --graph".
Leave "git rev-list" output as is (no space) so that they do not break.
Adjust "git-svn" which uses "git log --pretty=raw --boundary".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
At the porcelain level, because by definition there are many more contributors
than integrators, it makes sense to give a handy short-hand for --right-only
used with --cherry-mark and --no-merges. Make it so.
In other words, this provides "git cherry with rev-list interface".
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
for marking those commits which "--cherry-pick" would drop.
The marker for those commits is '=' because '-' denotes a boundary
commit already, even though 'git cherry' uses it.
Nonequivalent commits are denoted '+' unless '--left-right' is used.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, we have identical code for generating revision marks ('<',
'>', '-') in 5 places.
Factor out the code to a single function get_revision_mark() for easier
maintenance and extensibility.
Note that the check for !!revs in graph.c (which gets removed
effectively by this patch) is superfluous.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing "--cherry-pick" does not work with unsymmetric ranges
(A..B) for obvious reasons.
Introduce "--left-only" and "--right-only" which limit the output to
commits on the respective sides of a symmetric range (i.e. only "<"
resp. ">" commits as per "--left-right").
This is especially useful for things like
git log --cherry-pick --right-only @{u}...
which is much more flexible (and descriptive) than
git cherry @{u} | sed -ne 's/^+ //p'
and potentially more useful than
git log --cherry-pick @{u}...
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit_list prefix to insert_by_date function and to sort_by_date,
so it's clear that these functions refer to commit_list structure.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reflog-walking mechanism is based on the regular
revision traversal. We just rewrite the parents of each
commit in fake_reflog_parent to point to the commit in the
next reflog entry instead of the real parents.
However, the regular revision traversal tries not to show
the same commit twice, and so sets the SHOWN flag on each
commit it shows. In a reflog, however, we may want to see
the same commit more than once if it appears in the reflog
multiple times (which easily happens, for example, if you do
a reset to a prior state).
The fake_reflog_parent function takes care of this by
clearing flags, including SHOWN. Unfortunately, it does so
at the very end of the function, and it is possible to
return early from the function if there is no fake parent to
set up (e.g., because we are at the very first reflog entry
on the branch). In such a case the flag is not cleared, and
the entry is skipped by the revision traversal machinery as
already shown.
You can see this by walking the log of a ref which is set to
its very first commit more than once (the test below shows
such a situation). In this case the reflog walk will fail to
show the entry for the initial creation of the ref.
We don't want to simply move the flag-clearing to the top of
the function; we want to make sure flags set during the
fake-parent installation are also cleared. Instead, let's
hoist the flag-clearing out of the fake_reflog_parent
function entirely. It's not really about fake parents
anyway, and the only caller is the get_revision machinery.
Reported-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/shortopt-detached:
log: parse separate option for --glob
log: parse separate options like git log --grep foo
diff: parse separate options --stat-width n, --stat-name-width n
diff: split off a function for --stat-* option parsing
diff: parse separate options like -S foo
Conflicts:
revision.c
By passing the path to a submodule in opt->submodule, the function can
be used to walk history in the named submodule repository, instead of
the toplevel repository.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jp/string-list-api-cleanup:
string_list: Fix argument order for string_list_append
string_list: Fix argument order for string_list_lookup
string_list: Fix argument order for string_list_insert_at_index
string_list: Fix argument order for string_list_insert
string_list: Fix argument order for for_each_string_list
string_list: Fix argument order for print_string_list
Update the definition and callers of string_list_append to use the
string_list as the first argument. This helps make the string_list
API easier to use by being more consistent.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rev-list-ancestry-path:
revision: Turn off history simplification in --ancestry-path mode
revision: Fix typo in --ancestry-path error message
Documentation/rev-list-options.txt: Explain --ancestry-path
Documentation/rev-list-options.txt: Fix missing line in example history graph
revision: --ancestry-path
Add a --count option that, instead of actually listing the commits,
merely counts them.
This is mostly geared towards script use, and to this end it acts
specially when used with --left-right: it outputs the left and right
counts separately. Previously, scripts would have to run a shell loop
or small inline script over to achieve the same. (Without
--left-right, a simple |wc -l does the job.)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using --ancestry-path together with history simplification (typically
triggered by path limiting), history simplification would get in the way of
--ancestry-path by prematurely removing the parent links between commits on
which the ancestry path calculations are made.
This patch disables this history simplification when --ancestry-path is
enabled. This is similar to what e.g. --full-history already does.
The patch also includes a simple testcase verifying that --ancestry-path
works together with path limiting.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To show the last two commits with one command, one might try
1) git show -s master~2..
2) git show -s ^master~2 master
3) git show -s master^ master
4) git show -s -2 master
Choice (3) works because both commits are listed on the command line.
Choices (1) and (2) have worked ever since v1.6.4-rc~3 (Make 'git
show' more useful, 2009-07-13) disabled --no-walk in this case because
there is no other useful meaning for them to have. Unfortunately, (4)
does not work: it outputs only one commit, because --no-walk stays on.
So disable --no-walk in this case so ‘git show’ and future ‘git
cherry-pick’ can behave as expected.
As a side effect, this unfortunately changes the meaning of
‘git log --oneline --decorate --no-walk -5 --all’: instead of listing
five refs, after this patch that command would list the five most
recent commits.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this patch at least IBM VisualAge C 5.0 (I have 5.0.2) on AIX
5.1 fails to compile git.
enum style is inconsistent already, with some enums declared on one
line, some over 3 lines with the enum values all on the middle line,
sometimes with 1 enum value per line... and independently of that the
trailing comma is sometimes present and other times absent, often
mixing with/without trailing comma styles in a single file, and
sometimes in consecutive enum declarations.
Clearly, omitting the comma is the more portable style, and this patch
changes all enum declarations to use the portable omitted dangling
comma style consistently.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"rev-list A..H" computes the set of commits that are ancestors of H, but
excludes the ones that are ancestors of A. This is useful to see what
happened to the history leading to H since A, in the sense that "what does
H have that did not exist in A" (e.g. when you have a choice to update to
H from A).
x---x---A---B---C <-- topic
/ \
x---x---x---o---o---o---o---M---D---E---F---G <-- dev
/ \
x---o---o---o---o---o---o---o---o---o---o---o---N---H <-- master
The result in the above example would be the commits marked with caps
letters (except for A itself, of course), and the ones marked with 'o'.
When you want to find out what commits in H are contaminated with the bug
introduced by A and need fixing, however, you might want to view only the
subset of "A..B" that are actually descendants of A, i.e. excluding the
ones marked with 'o'. Introduce a new option --ancestry-path to compute
this set with "rev-list --ancestry-path A..B".
Note that in practice, you would build a fix immediately on top of A and
"git branch --contains A" will give the names of branches that you would
need to merge the fix into (i.e. topic, dev and master), so this may not
be worth paying the extra cost of postprocessing.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
* pb/log-first-parent-p-m:
show --first-parent/-m: do not default to --cc
show -c: show patch text
revision: introduce setup_revision_opt
t4013: add tests for log -p -m --first-parent
git log -p -m: document -m and honor --first-parent
If a revision is specified, it happens not to have any commits, don't
use the default revision. By doing so, surprising and undesired
behavior can happen, such as showing the reflog for HEAD when a branch
was specified.
[jc: squashed a test from René]
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this patch, you can set notes.displayRef to a glob that points at
your favourite notes refs, e.g.,
[notes]
displayRef = refs/notes/*
Then git-log and friends will show notes from all trees.
Thanks to Junio C Hamano for lots of feedback, which greatly
influenced the design of the entire series and this commit in
particular.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, "show" defaulted to "show --cc" (dense combined patch), but
asking for combined patch with "show -c" didn't turn the patch output
format on; the placement of this logic in setup_revisions() dates back to
cd2bdc5 (Common option parsing for "git log --diff" and friends,
2006-04-14).
This unfortunately cannot be done as a trivial change of "if dense
combined is asked, default to patch format" done in setup_revisions() to
"if any combined is asked, default to patch format", as "diff-tree -c"
needs to default to raw, while "diff-tree --cc" needs to default to patch,
and they share the codepath. These command specific defaults are now
handled in the new "tweak" callback that can be customized by individual
command implementations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So far the last parameter to setup_revisions() was to specify the default
ref when the command line did not give any (typically "HEAD"). This changes
it to take a pointer to a structure so that we can add other information without
touching too many codepaths in later patches.
There is no functionality change.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --cherry-pick logic starts by counting the commits on each side,
so that it can filter away commits on the bigger one. However, so
far it missed an opportunity for optimization: it doesn't need to do
any work if either side is empty.
This in particular helps the common use-case 'git rebase -i HEAD~$n':
it internally uses --cherry-pick, but since HEAD~$n is a direct
ancestor the left side is always empty.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, any grep filter in "git log" family of commands were taken
as restricting to commits with any of the words in the commit log message.
However, the user almost always want to find commits "done by this person
on that topic". With "--all-match" option, a series of grep patterns can
be turned into a requirement that all of them must produce a match, but
that makes it impossible to ask for "done by me, on either this or that"
with:
log --author=me --committer=him --grep=this --grep=that
because it will require both "this" and "that" to appear.
Change the "header" parser of grep library to treat the headers specially,
and parse it as:
(all-match-OR (HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(OR
(PATTERN this)
(PATTERN that) ) )
Even though the "log" command line parser doesn't give direct access to
the extended grep syntax to group terms with parentheses, this change will
cover the majority of the case the users would want.
This incidentally revealed that one test in t7002 was bogus. It ran:
log --author=Thor --grep=Thu --format='%s'
and expected (wrongly) "Thu" to match "Thursday" in the author/committer
date, but that would never match, as the timestamp in raw commit buffer
does not have the name of the day-of-the-week.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-diff:
Performance optimization for detection of modified submodules
git status: Show uncommitted submodule changes too when enabled
Teach diff that modified submodule directory is dirty
Show submodules as modified when they contain a dirty work tree
Giving "Notes" information in the default output format of "log" and
"show" is a sensible progress (the user has asked for it by having the
notes), but for some commands (e.g. "format-patch") spewing notes into the
formatted commit log message without being asked is too aggressive.
Enable notes output only for "log", "show", "whatchanged" by default and
only when the user didn't ask any specific --pretty/--format from the
command line; users can explicitly override this default with --show-notes
and --no-notes option.
Parts of tests are taken from Jeff King's fix.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since local branch, tags and remote tracking branch namespaces are
most often used, add shortcut notations for globbing those in
manner similar to --glob option.
With this, one can express the "what I have but origin doesn't?"
as:
'git log --branches --not --remotes=origin'
Original-idea-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add --glob=<glob-pattern> option to rev-parse and everything that
accepts its options. This option matches all refs that match given
shell glob pattern (complete with some DWIM logic).
Example:
'git log --branches --not --glob=remotes/origin'
To show what you have that origin doesn't.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
