Take care of simple, exceptional cases before the meat of the "check
out by branch name" code begins. After this change, the function
vaguely follows the following pseudocode:
if (-B or -b)
create branch;
if (plain "git checkout" or "git checkout HEAD")
;
else if (--detach or checking out by non-branch commit name)
detach HEAD;
else if (checking out by branch name)
attach HEAD;
One nice side benefit is to make it possible to remove handling of
the --detach option from outside switch_branches.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, one might use this when making a temporary merge to
test that two topics work well together.
Patch by Junio, with tests from Jeff King.
[jn: with some extra checks for bogus commandline usage]
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code to parse and consume the tree name and "--" in commands such
as "git checkout @{-1} -- '*.c'" is intimidatingly long. Split it out
into a separate function and make it easier to skip on first reading
by making the data it uses and produces more explicit.
No functional change intended.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commits, trees and tags have structure. Don't let users feed git
with malformed ones. Sooner or later git will die() when
encountering them.
Note that this patch does not check semantics. A tree that points
to non-existent objects is perfectly OK (and should be so, users
may choose to add commit first, then its associated tree for example).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --cached" (without revision) used to mean "git diff --cached
HEAD" (i.e. the user was too lazy to type HEAD). This "correctly"
failed when there was no commit yet. But was that correctness useful?
This patch changes the definition of what particular command means.
It is a request to show what _would_ be committed without further "git
add". The internal implementation is the same "git diff --cached HEAD"
when HEAD exists, but when there is no commit yet, it compares the index
with an empty tree object to achieve the desired result.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there is a random garbage file whose name happens to be 38-byte
long in a .git/objects/??/ directory, the loop terminated prematurely
without marking all the other files that it hasn't checked in the
readdir() loop.
Treat such a file just like any other garbage file, and do not break out
of the readdir() loop.
While at it, replace repeated sprintf() calls to a single one outside the
loop.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
Instead of stripping space characters past the beginning of the
line and overflowing a buffer, stop at the beginning of the line
(mimicking the corresponding fix in remote-fd).
The argument to isspace does not need to be cast explicitly because
git isspace takes care of that already.
Noticed-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the message advises to fix the configuration first, the
advantage of using this command is that it is cut-and-paste ready,
while using --author='...' requires the user to type his name and
email again.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual dwim_ref lookup prefers tags to branches. Because
checkout primarily works on branches, though, we switch that
behavior to prefer branches.
However, there was a bug in the implementation in which we
used lookup_commit_reference (which used the regular lookup
rules) to get the actual commit to checkout. Checking out an
ambiguous ref therefore ended up putting us in an extremely
broken state in which we wrote the branch ref into HEAD, but
actually checked out the tree for the tag.
This patch fixes the bug by always attempting to pull the
commit to be checked out from the branch-ified version of
the name we were given.
Patch by Junio, tests and commit message from Jeff King.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example, this would allow cherry-picking or reverting patches from
a piece of history with a different end-of-line style, like so:
$ git revert -Xrenormalize old-problematic-commit
Currently that is possible with manual use of merge-recursive but the
cherry-pick/revert porcelain does not expose the functionality.
While at it, document the existing support for --strategy.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/setup: (47 commits)
setup_work_tree: adjust relative $GIT_WORK_TREE after moving cwd
git.txt: correct where --work-tree path is relative to
Revert "Documentation: always respect core.worktree if set"
t0001: test git init when run via an alias
Remove all logic from get_git_work_tree()
setup: rework setup_explicit_git_dir()
setup: clean up setup_discovered_git_dir()
t1020-subdirectory: test alias expansion in a subdirectory
setup: clean up setup_bare_git_dir()
setup: limit get_git_work_tree()'s to explicit setup case only
Use git_config_early() instead of git_config() during repo setup
Add git_config_early()
git-rev-parse.txt: clarify --git-dir
t1510: setup case #31
t1510: setup case #30
t1510: setup case #29
t1510: setup case #28
t1510: setup case #27
t1510: setup case #26
t1510: setup case #25
...
This logic is now only used by cmd_init_db(). setup_* functions do not
rely on it any more. Move all the logic to cmd_init_db() and turn
get_git_work_tree() into a simple function.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_git_work_tree() takes input as core.worktree, core.bare,
GIT_WORK_TREE and decides correct worktree setting.
Unfortunately it does not do its job well. core.worktree and
GIT_WORK_TREE should only be taken into account, if GIT_DIR is set
(which is handled by setup_explicit_git_dir). For other setup cases,
only core.bare matters.
Add a temporary variable setup_explicit to adjust get_git_work_tree()
behavior as such. This variable will be gone once setup_* rework is
done.
Also remove is_bare_repository_cfg check in set_git_work_tree() to
ease the rework. We are going to check for core.bare and core.worktree
early before setting worktree. For example, if core.bare is true, no
need to set worktree.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When determine_author_info() returns to the calling prepare_to_commit(),
we already know the pieces of information necessary to determine what
author ident will be used in the final message, but deferred making a call
to fmt_ident() before the final commit_tree(). Most importantly, we would
open the editor to ask the user to compose the log message before it.
As one important side effect of fmt_ident() is to error out when the given
information is malformed, this resulted in us spawning the editor first
and then refusing to commit due to error, even though we had enough
information to detect the error before starting the editor, which was
annoying.
Move the fmt_ident() call to the end of determine_author_info() where we
have final determination of author info to rectify this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ak/describe-exact:
describe: Delay looking up commits until searching for an inexact match
describe: Store commit_names in a hash table by commit SHA1
describe: Do not use a flex array in struct commit_name
describe: Use for_each_rawref
* jn/parse-options-extra:
update-index: migrate to parse-options API
setup: save prefix (original cwd relative to toplevel) in startup_info
parse-options: make resuming easier after PARSE_OPT_STOP_AT_NON_OPTION
parse-options: allow git commands to invent new option types
parse-options: never suppress arghelp if LITERAL_ARGHELP is set
parse-options: do not infer PARSE_OPT_NOARG from option type
parse-options: sanity check PARSE_OPT_NOARG flag
parse-options: move NODASH sanity checks to parse_options_check
parse-options: clearer reporting of API misuse
parse-options: Don't call parse_options_check() so much
* jn/git-cmd-h-bypass-setup:
update-index -h: show usage even with corrupt index
merge -h: show usage even with corrupt index
ls-files -h: show usage even with corrupt index
gc -h: show usage even with broken configuration
commit/status -h: show usage even with broken configuration
checkout-index -h: show usage even in an invalid repository
branch -h: show usage even in an invalid repository
Conflicts:
builtin/merge.c
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
All files that include this header file use the same four line
incantation:
#ifndef NO_PTHREADS
#include <pthread.h>
#include "thread-utils.h"
#endif
Move the responsibility for that gymnastics to the header file from the
files that include it. This approach makes it easier to later declare new
services that are related to threading in thread-utils.h and have them
available to all the threading code.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that struct commit.util is not used until after we've checked that
the argument doesn't exactly match a tag, we can wait until then to
look up the commits for each tag.
This avoids a lot of I/O on --exact-match queries in repositories with
many tags. For example, 'git describe --exact-match HEAD' becomes
about 12 times faster on a cold cache (3.2s instead of 39s) in a
linux-2.6 repository with 2000 packed tags. That is a huge win for the
interactivity of the __git_ps1 shell prompt helper when on a detached
HEAD.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
describe is currently forced to look up the commit at each tag in
order to store the struct commit_name pointers in struct commit.util.
For --exact-match queries, those lookups are wasteful. In preparation
for removing them, put the commit_names into a hash table, indexed by
commit SHA1, that can be used to quickly check for exact matches.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now add_to_known_names overwrites commit_names in place when multiple
tags point to the same commit. This will make it easier to store
commit_names in a hash table.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't waste time checking for dangling refs; they wouldn't affect the
output of 'git describe' anyway. Although this does not gain much
performance by itself, it does in conjunction with the next commits.
Signed-off-by: Anders Kaseorg <andersk@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mg/maint-tag-rfc1991:
tag: recognize rfc1991 signatures
tag: factor out sig detection for tag display
tag: factor out sig detection for body edits
verify-tag: factor out signature detection
t/t7004-tag: test handling of rfc1991 signatures
* jh/notes-merge: (23 commits)
Provide 'git merge --abort' as a synonym to 'git reset --merge'
cmd_merge(): Parse options before checking MERGE_HEAD
Provide 'git notes get-ref' to easily retrieve current notes ref
git notes merge: Add testcases for merging notes trees at different fanouts
git notes merge: Add another auto-resolving strategy: "cat_sort_uniq"
git notes merge: --commit should fail if underlying notes ref has moved
git notes merge: List conflicting notes in notes merge commit message
git notes merge: Manual conflict resolution, part 2/2
git notes merge: Manual conflict resolution, part 1/2
Documentation: Preliminary docs on 'git notes merge'
git notes merge: Add automatic conflict resolvers (ours, theirs, union)
git notes merge: Handle real, non-conflicting notes merges
builtin/notes.c: Refactor creation of notes commits.
git notes merge: Initial implementation handling trivial merges only
builtin/notes.c: Split notes ref DWIMmery into a separate function
notes.c: Use two newlines (instead of one) when concatenating notes
(trivial) t3303: Indent with tabs instead of spaces for consistency
notes.h/c: Propagate combine_notes_fn return value to add_note() and beyond
notes.h/c: Allow combine_notes functions to remove notes
notes.c: Reorder functions in preparation for next commit
...
Conflicts:
builtin.h
--refresh and --really-refresh accept flags (like -q) and modify
an error indicator. It might make sense to make the error
indicator global, but just pass the flags and a pointer to the error
indicator in a struct instead.
--cacheinfo wants 3 arguments. Use the OPTION_LOWLEVEL_CALLBACK
extension to grab them and PARSE_OPT_NOARG to disallow the "sticked"
--cacheinfo=foo form. (The resulting message
$ git update-index --cacheinfo=foo
error: option `cacheinfo' takes no value
is unfortunately incorrect.)
--assume-unchanged and --no-assume-unchanged probably should use the
OPT_UYN feature; but use a callback for now so the existing MARK_FLAG
and UNMARK_FLAG values can be used.
--stdin and --index-info are still constrained to be the last argument
(implemented using the OPTION_LOWLEVEL_CALLBACK extension).
--unresolve and --again consume all arguments that come after them
(also using OPTION_LOWLEVEL_CALLBACK).
The order of options matters. Each path on the command line is
affected only by the options that come before it. A custom
argument-parsing loop with parse_options_step() brings that about.
In exchange for all the fuss, we get the usual perks: support for
un-sticked options, better usage error messages, more useful -h
output, and argument parsing code that should be easier to tweak
in the future.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
parse_options_check() is being called for each invocation of
parse_options_step which can be quite a bit for some commands. The
commit introducing this function cb9d398 (parse-options: add
parse_options_check to validate option specs., 2009-06-09) had the
correct motivation and explicitly states that parse_options_check()
should be called from parse_options_start(). However, the implementation
differs from the motivation. Fix it.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/thinner-wrapper:
Remove pack file handling dependency from wrapper.o
pack-objects: mark file-local variable static
wrapper: give zlib wrappers their own translation unit
strbuf: move strbuf_branchname to sha1_name.c
path helpers: move git_mkstemp* to wrapper.c
wrapper: move odb_* to environment.c
wrapper: move xmmap() to sha1_file.c
* pn/commit-autosquash:
add tests of commit --squash
commit: --squash option for use with rebase --autosquash
add tests of commit --fixup
commit: --fixup option for use with rebase --autosquash
pretty.c: teach format_commit_message() to reencode the output
commit: helper methods to reduce redundant blocks of code
Conflicts:
Documentation/git-commit.txt
t/t3415-rebase-autosquash.sh
* sn/diff-doc:
docs: clarify git diff modes of operation
diff,difftool: Don't use the {0,2} notation in usage strings
CodingGuidelines: Add a section on writing documentation
* maint:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
* maint-1.7.2:
add: introduce add.ignoreerrors synonym for add.ignore-errors
bash: Match lightweight tags in prompt
git-commit.txt: (synopsis): move -i and -o before "--"
You can tell "git status" to paint the name of the current branch in its
output (the line that says "On branch ...") by setting the configuration
variable color.status.branch; it is by default turned off.
Signed-off-by: Aleksi Aalto <aga@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add commit_list prefix to insert_by_date function and to sort_by_date,
so it's clear that these functions refer to commit_list structure.
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mm/phrase-remote-tracking:
git-branch.txt: mention --set-upstream as a way to change upstream configuration
user-manual: remote-tracking can be checked out, with detached HEAD
user-manual.txt: explain better the remote(-tracking) branch terms
Change incorrect "remote branch" to "remote tracking branch" in C code
Change incorrect uses of "remote branch" meaning "remote-tracking"
Change "tracking branch" to "remote-tracking branch"
everyday.txt: change "tracking branch" to "remote-tracking branch"
Change remote tracking to remote-tracking in non-trivial places
Replace "remote tracking" with "remote-tracking"
Better "Changed but not updated" message in git-status
Pass output through the pager if format-patch is run with --stdout. This
saves the user the trouble of running git with '-p' or piping through a
pager.
setup_pager() already checks if stdout is a tty, so we don't have to
worry about behaviour if the user redirects/pipes stdout. Paging can
also be disabled with the config
[pager]
format-patch = false
Add tests to check for these behaviour.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When compiling with pthread support, transport-helper.c needs to include
necessary header files. Also fix a few error messages in remote-ext and
remote-fd programs, and a potential buffer underrun in remote-fd.
In the documentation, clarify how %G and %V are used; the old description
looked as if they take repository/vhost parameters, which was wrong.
Also fix AsciiDoc markup for the page title of remote-fd/remote-ext manpages,
and tweak the way how section headers are shown.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/push-progress:
push: pass --progress down to git-pack-objects
t5523-push-upstream: test progress messages
t5523-push-upstream: add function to ensure fresh upstream repo
test_terminal: ensure redirections work reliably
test_terminal: catch use without TTY prerequisite
test-lib: allow test code to check the list of declared prerequisites
tests: test terminal output to both stdout and stderr
tests: factor out terminal handling from t7006
baselen used to be the result of common_prefix() when it was made
builtin. Since 1d8842d (Add 'fill_directory()' helper function for
directory traversal - 2009-05-14), its value will always be
zero. Remove it because it's no longer variable.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git merge' the --abort option, which verifies the existence of
MERGE_HEAD and then invokes 'git reset --merge' to abort the current
in-progress merge and attempt to reconstruct the pre-merge state.
The reason for adding this option is to provide a user interface for
aborting an in-progress merge that is consistent with the interface
for aborting a rebase ('git rebase --abort'), aborting the application
of a patch series ('git am --abort'), and aborting an in-progress notes
merge ('git notes merge --abort').
The patch includes documentation and testcases that explain and verify
the various scenarios in which 'git merge --abort' can run. The
testcases also document the cases in which 'git merge --abort' is
unable to correctly restore the pre-merge state (look for the '###'
comments towards the bottom of t/t7609-merge-abort.sh).
This patch has been improved by the following contributions:
- Jonathan Nieder: Move test documentation into test_description
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder the initial part of builtin/merge.c:cmd_merge() so that command-line
options are parsed _before_ we load the index and check for MERGE_HEAD
(and exits if it exists). This does not change the behaviour of 'git merge',
but is needed in preparation for the implementation of 'git merge --abort'
(which requires MERGE_HEAD to be present).
This patch has been improved by the following contributions:
- Junio C Hamano: fixup minor style issues
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Script may use 'git notes get-ref' to easily retrieve the current notes ref.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new strategy is similar to "concatenate", but in addition to
concatenating the two note candidates, this strategy sorts the resulting
lines, and removes duplicate lines from the result. This is equivalent to
applying the "cat | sort | uniq" shell pipeline to the two note candidates.
This strategy is useful if the notes follow a line-based format where one
wants to avoid duplicate lines in the merge result.
Note that if either of the note candidates contain duplicate lines _prior_
to the merge, these will also be removed by this merge strategy.
The patch also contains tests and documentation for the new strategy.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When manually resolving a notes merge, if the merging ref has moved since
the merge started, we should fail to complete the merge, and alert the user
to what's going on.
This situation may arise if you start a 'git notes merge' which results in
conflicts, and you then update the current notes ref (using for example
'git notes add/copy/amend/edit/remove/prune', 'git update-ref', etc.),
before you get around to resolving the notes conflicts and calling
'git notes merge --commit'.
We detect this situation by comparing the first parent of the partial merge
commit (which was created when the merge started) to the current value of the
merging notes ref (pointed to by the .git/NOTES_MERGE_REF symref).
If we don't fail in this situation, the notes merge commit would overwrite
the updated notes ref, thus losing the changes that happened in the meantime.
The patch includes a testcase verifying that we fail correctly in this
situation.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This brings notes merge in line with regular merge's behaviour.
This patch has been improved by the following contributions:
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the notes merge conflicts in .git/NOTES_MERGE_WORKTREE have been
resolved, we need to record a new notes commit on the appropriate notes
ref with the resolved notes.
This patch implements 'git notes merge --commit' which the user should
run after resolving conflicts in the notes merge worktree. This command
finalizes the notes merge by recombining the partial notes tree from
part 1 with the now-resolved conflicts in the notes merge worktree in a
merge commit, and updating the appropriate ref to this merge commit.
In order to correctly finalize the merge, we need to keep track of three
things:
- The partial merge result from part 1, containing the auto-merged notes.
This is now stored into a ref called .git/NOTES_MERGE_PARTIAL.
- The unmerged notes. These are already stored in
.git/NOTES_MERGE_WORKTREE, thanks to part 1.
- The notes ref to be updated by the finalized merge result. This is now
stored in a symref called .git/NOTES_MERGE_REF.
In addition to "git notes merge --commit", which uses the above details
to create the finalized notes merge commit, this patch also implements
"git notes merge --reset", which aborts the ongoing notes merge by simply
removing the files/directory described above.
FTR, "git notes merge --commit" reuses "git notes merge --reset" to remove
the information described above (.git/NOTES_MERGE_*) after the notes merge
have been successfully finalized.
The patch also contains documentation and testcases for the two new options.
This patch has been improved by the following contributions:
- Ævar Arnfjörð Bjarmason: Fix nonsense sentence in --commit description
- Sverre Rabbelier: Rename --reset to --abort
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conflicts (that are to be resolved manually) are written into a special-
purpose working tree, located at .git/NOTES_MERGE_WORKTREE. Within this
directory, conflicting notes entries are stored (with conflict markers
produced by ll_merge()) using the SHA1 of the annotated object. The
.git/NOTES_MERGE_WORKTREE directory will only contain the _conflicting_
note entries. The non-conflicting note entries (aka. the partial merge
result) are stored in 'local_tree', and the SHA1 of the resulting commit
is written to 'result_sha1'. The return value from notes_merge() is -1.
The user is told to edit the files within the .git/NOTES_MERGE_WORKTREE
directory in order to resolve the conflicts.
The patch also contains documentation and testcases for the correct setup
of .git/NOTES_MERGE_WORKTREE.
The next part will recombine the partial notes merge result with the
resolved conflicts in .git/NOTES_MERGE_WORKTREE to produce the complete
merge result.
This patch has been improved by the following contributions:
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new -s/--strategy command-line option to 'git notes merge' allow the user
to choose how notes merge conflicts should be resolved. There are four valid
strategies to choose from:
1. "manual" (the default): This will let the user manually resolve conflicts.
This option currently fails with an error message. It will be implemented
properly in future patches.
2. "ours": This automatically chooses the local version of a conflict, and
discards the remote version.
3. "theirs": This automatically chooses the remote version of a conflict, and
discards the local version.
4. "union": This automatically resolves the conflict by appending the remote
version to the local version.
The strategies are implemented using the combine_notes_* functions from the
notes.h API.
The patch also includes testcases verifying the correct implementation of
these strategies.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Stephen Boyd: Use test_commit
- Stephen Boyd: Use correct option name
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This continuation of the 'git notes merge' implementation teaches notes-merge
to properly do real merges between notes trees: Two diffs are performed, one
from $base to $remote, and another from $base to $local. The paths in each
diff are normalized to SHA1 object names. The two diffs are then consolidated
into a single list of change pairs to be evaluated. Each change pair consist
of:
- The annotated object's SHA1
- The $base SHA1 (i.e. the common ancestor notes for this object)
- The $local SHA1 (i.e. the current notes for this object)
- The $remote SHA1 (i.e. the to-be-merged notes for this object)
From the pair ($base -> $local, $base -> $remote), we can determine the merge
result using regular 3-way rules. If conflicts are encountered in this
process, we fail loudly and exit (conflict handling to be added in a future
patch), If we can complete the merge without conflicts, the resulting
notes tree is committed, and the current notes ref updated.
The patch includes added testcases verifying that we can successfully do real
conflict-less merges.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Stephen Boyd: Use test_commit
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Junio C Hamano: fixup minor style issues
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create new function create_notes_commit() which is slightly more general than
commit_notes() (accepts multiple commit parents and does not auto-update the
notes ref). This function will be used by the notes-merge functionality in
future patches.
Also rewrite builtin/notes.c:commit_notes() to reuse this new function.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This initial implementation of 'git notes merge' only handles the trivial
merge cases (i.e. where the merge is either a no-op, or a fast-forward).
The patch includes testcases for these trivial merge cases.
Future patches will extend the functionality of 'git notes merge'.
This patch has been improved by the following contributions:
- Stephen Boyd: Simplify argc logic
- Stephen Boyd: Use test_commit
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
- Jonathan Nieder: Add constants for common verbosity values
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Jonathan Nieder: Remove extraneous show() function
- Jonathan Nieder: Clarify handling of empty/missing notes ref in notes_merge()
- Junio C Hamano: fixup minor style issues
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
expand_notes_ref() is a new function that performs the DWIM transformation
of "foo" -> "refs/notes/foo" where notes refs are expected.
This is done in preparation for future patches which will also need this
DWIM functionality.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The combine_notes_fn functions uses a non-zero return value to indicate
failure. However, this return value was converted to a call to die()
in note_tree_insert().
Instead, propagate this return value out to add_note(), and return it
from there to enable the caller to handle errors appropriately.
Existing add_note() callers are updated to die() upon failure, thus
preserving the current behaviour. The only exceptions are copy_note()
and notes_cache_put() where we are able to propagate the add_note()
return value instead.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Jonathan Nieder: Improve clarity of final if-condition in note_tree_insert()
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
qname is the result of quote_path_relative(), which does
quote_c_style_counted() internally. Remove the hard-coded quotes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add OPT__FORCE as a helper macro in the same spirit as OPT__VERBOSE
et.al. to simplify defining -f/--force options.
Signed-off-by: Rene Scharfe <rene.scharfe@lstfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be quiet". Also make use
of the macro in a place that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "dry run". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows better help text to be defined than "be verbose". Also make use
of the macro in places that already had a different description. No
object code changes intended.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case HEAD does not point to a valid commit yet, merge is
implemented as a hard reset. This will cause untracked files to be
overwritten.
Instead, assume the empty tree for HEAD and do a regular merge. An
untracked file will cause the merge to abort and do nothing. If no
conflicting files are present, the merge will have the same effect
as a hard reset.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) added support for excluded() where dtype can be NULL. It
was designed specifically for index matching because there was no
other way to extract dtype information from index. It did not support
wildcard matching (for example, "a*/" pattern would fail to match).
The code was probably misread when commit 108da0d (git add: Add the
"--ignore-missing" option for the dry run - 2010-07-10) was made
because DT_UNKNOWN happens to be zero (NULL) too.
Do not pass DT_UNKNOWN/NULL to excluded(), instead pass a pointer to a
variable that contains DT_UNKNOWN. The real dtype will be extracted
from worktree by excluded(), as expected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
old_try_to_free_routine is not meant for use from other files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the factored out code for sig detection when displaying tags.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the factored out code for sig detection when editing existing
tag bodies (tag -a -f without -m).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
into tag.h/c for later reuse and modification.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stat-dirty index is not a detail that ought to concern the operator
of porcelain such as "git cherry-pick".
Without this change, a cherry-pick after copying a worktree with rsync
errors out with a misleading message.
$ git cherry-pick build/top
error: Your local changes to 'file.h' would be overwritten by merge. Aborting.
Please, commit your changes or stash them before you can merge.
Noticed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like '-08:00' instead of
'-0800' in their ---/+++ lines (e.g. http://lwn.net/Articles/131729/).
Take this into account when searching for the start of the timezone
(which is the end of the filename).
This does not actually affect the outcome of patching unless (1) a
file being patched has a non-' ' whitespace character (e.g., tab) in
its filename, or (2) the patch is whitespace-damaged, so the tab
between filename and timestamp has been replaced with spaces.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix the case when the patch is a rename or mode-change only
and -p is used with a value greater than one.
The git_header_name function did not remove more than one path
component.
Signed-off-by: Federico Cuello <fedux@lugmen.org.ar>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 1.6.5 "git clone" honors the --recursive option to recursively check
out submodules too. As this option can easily be misinterpreted when it is
added to other commands like "git grep", add the new --recurse-submodules
option as an alias for --recursive so the same option can be used for all
commands recursing into submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was the only occurence of that usage, and square brackets are
sufficient and already well-established for that purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"squash! ..." where "..." is the subject line of the specified commit
message. This option can be used with other commit message options
such as -m, -c, -C and -F.
If an editor is invoked (as with -c or -eF or no message options) the
commit message is seeded with the correctly formatted subject line.
Example usage:
$ git commit --squash HEAD~2
$ git commit --squash HEAD~2 -m "clever comment"
$ git commit --squash HEAD~2 -F msgfile
$ git commit --squash HEAD~2 -C deadbeef
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option makes it convenient to construct commit messages for use
with 'rebase --autosquash'. The resulting commit message will be
"fixup! ..." where "..." is the subject line of the specified commit
message.
Example usage:
$ git commit --fixup HEAD~2
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* builtin/commit.c: Replace block of code with a one-liner call to
logmsg_reencode().
* commit.c: new function for looking up a comit by name
* pretty.c: helper methods for getting output encodings
Add helpers get_log_output_encoding() and
get_commit_output_encoding() that eliminate some messy and duplicate
if-blocks.
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(Just like we did for documentation already)
In the process, we change "non-remote branch" to "branch outside the
refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch".
The new formulation actually corresponds to how the code detects this
case (i.e. prefixcmp(refname, "refs/remotes")).
Also, we use 'remote-tracking branch' in generated merge messages (by
merge an fmt-merge-msg).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One more step towards consistancy. We change the documentation and the C
code in a single patch, since the only instances in the C code are in
comment and usage strings.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually when applying a binary diff generated without
--binary, it will be rejected early, as we don't even have
the full sha1 of the pre- and post-images.
However, if the diff is generated with --full-index (but not
--binary), then we will actually try to apply it. If we have
the postimage blob, then we can take a shortcut and never
even look at the binary diff at all (e.g., this can happen
when rebasing changes within a repository).
If we don't have the postimage blob, though, we try to look
at the actual fragments, of which there are none, and get a
segfault. This patch checks explicitly for that case and
complains to the user instead of segfaulting. We need to
keep the check at a low level so that the "shortcut" case
above continues to work.
We also add a test that demonstrates the segfault. While
we're at it, let's also explicitly test the shortcut case.
Reported-by: Rafaël Carré <rafael.carre@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now, packing valid objects could fail when creating a thin pack
simply because a pack edge object used as a preferred base is corrupted.
Since preferred base objects are not strictly needed to produce a valid
pack, let's not consider the inability to read them as a fatal error.
Delta compression may well be attempted against other objects in the
search window. To avoid warning storms (we are in the inner loop of
the delta search window) a warning is emitted only on the first
occurrence.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to fix up a corrupt repository, one might prefer that
"update-index -h" print an accurate usage message and exit rather
than reading the repository and complaining about the corruption.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to make sure "git <command> -h" works correctly
when run from distractingly bad repositories.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to avoid git <command> -h being distracted by
access to the repository. A caller hoping to use "git ls-files"
with an alternate index as part of a repair operation may well use
"git ls-files -h" to show usage while planning it out.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given a request for command-line usage information rather than some
more substantial action, the only friendly thing to do is to report
the usage information as soon as possible and exit.
Without this change, as "git gc" glances over the repository, it can
be distracted by the desire to report a malformed configuration file.
Noticed while working through reports from Duy's repository access
checker.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" and "git commit" read .git/config and .gitmodules before
parsing options, but there is no reason to access a repository at all
when the caller just wanted to know what arguments are accepted.
[jn: rewrote the log message and added test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index loads the index before parsing options. Erroring out
is counterproductive at that point if the operator is hunting for a
command to recover useful data from the broken repository.
[jn: new commit message, tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for "git branch -h" to try to access a repository.
In the spirit of v1.6.6-rc0~34^2~3 (Let 'git <command> -h' show usage
without a git dir, 2009-11-09). This brings git one step closer to
passing the following (automatically verifiable) test:
Before any repository access (aside from git_config()), a
function from the setup_git_directory_* family has been run
and thus one step closer to being able to use an automatic repository
access checker.
[jn: simplified; new commit message, test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option -e (or --show-email) to git-blame that will display
the author's email instead of name on each line. This option works
for both git-blame and git-annotate.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing via builtin transports (like file://, git://), the
underlying transport helper (in this case, git-pack-objects) did not get
the --progress option, even if it was passed to git push.
Fix this, and update the tests to reflect this.
Note that according to the git-pack-objects documentation, we can safely
apply the usual --progress semantics for the transport commands like
clone and fetch (and for pushing over other smart transports).
Reported-by: Chase Brammer <cbrammer@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Saying "pack-objects died with strange error" after "pack-objects died
of signal 13" seems kind of redundant. The latter message was
introduced when the run-command API changed to report abnormal exits
on behalf of the caller (v1.6.5-rc0~86^2~5, 2009-07-04).
Similarly, after a controlled pack-objects failure (detectable as a
normal exit with nonzero status), a "died with strange error" message
would be redundant next to the message from pack-objects itself.
So leave off the "strange error" messages.
The result should look something like this:
$ git push sf master
Counting objects: 21542, done.
Compressing objects: 100% (4179/4179), done.
fatal: Unable to create temporary file: Permission denied
error: pack-objects died of signal 13
error: failed to push some refs to 'ssh://sf.net/gitroot/project/project'
$
Or in the "controlled exit" case (contrived example):
[...]
fatal: delta size changed
error: failed to push some refs to 'ssh://example.com/foo/bar'
$
Improved-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b541248 (merge.conflictstyle: choose between "merge" and "diff3
-m" styles, 2008-08-29), git-merge-file uses setup_directory_gently(),
thus cd'ing around to find any possible config files to use.
This broke merge-file when it is called from within a subdirectory of
a repository, and the arguments are all relative paths.
Fix by prepending the prefix, as passed down from the main git
setup code, if there is any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths for showing commits in "git log" and "git
rev-list --graph" correctly handle embedded NULs by looking
only at the resulting strbuf's length, and never treating it
as a C string. The code path for regular rev-list, however,
used printf("%s"), which resulted in truncated output. This
patch uses fwrite instead, like the --graph code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like ‘-08:00’ instead of
‘-0800’ (e.g. http://lwn.net/Articles/131729/), so git apply would
fail to recognize the epoch timestamp of deleted files and would
create empty files instead. Teach it to support both formats, and add
a test case.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper invokes external command and passes raw smart transport
stream through it. This is useful for instance for invoking ssh with
one-off odd options, connecting to git services in unix domain
sockets, in abstract namespace, using TLS or other secure protocols,
etc...
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This remote helper reflects raw smart remote transport stream back to the
calling program. This is useful for example if some UI wants to handle
ssh itself and not use hacks via GIT_SSH.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `<file>' argument is optional in both cases (the man pages are
already correct).
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it cosistent with other places (including the
git-pack-objects(1) manpage itself) and avoids possible confusion (I,
for one, mistook `<object-list' for a `<object-list>' typo at first when
preparing this series).
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove some stray usage of other bracket types and asterisks for the
same purpose.
Signed-off-by: Štěpán Němec <stepnem@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This buffer is freed by the C runtime when commit-tree exits moments
later, but freeing it explicitly should make valgrind quieter.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-clone: describe --mirror more verbosely
do not depend on signed integer overflow
work around buggy S_ISxxx(m) implementations
xdiff: cast arguments for ctype functions to unsigned char
init: plug tiny one-time memory leak
diffcore-pickaxe.c: remove unnecessary curly braces
t3020 (ls-files-error-unmatch): remove stray '1' from end of file
setup: make sure git dir path is in a permanent buffer
environment.c: remove unused variable
git-svn: fix processing of decorated commit hashes
git-svn: check_cherry_pick should exclude commits already in our history
Documentation/git-svn: discourage "noMetadata"
Signed integer overflow is not defined in C, so do not depend on it.
This fixes a problem with GCC 4.4.0 and -O3 where the optimizer would
consider "consumed_bytes > consumed_bytes + bytes" as a constant
expression, and never execute the die()-call.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The buffer used to construct paths like ".git/objects/info" and
".git/objects/pack" is allocated on the heap and never freed.
So free it. While at it, factor out the relevant code into its own
function and rename the sha1_dir variable to object_directory (to
match the change in everyday usage after the renaming of
SHA1_FILE_DIRECTORY in v0.99~603^2~7, 2005).
Noticed by valgrind while setting up tests (in test-lib).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix typo in pack-objects' usage
Make sure that git_getpass() never returns NULL
t0004 (unwritable files): simplify error handling
rev-list-options: clarify --parents and --children
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rr/fmt-merge-msg:
t6200-fmt-merge-msg: Exercise '--log' to configure shortlog length
t6200-fmt-merge-msg: Exercise 'merge.log' to configure shortlog length
merge: Make 'merge.log' an integer or boolean option
merge: Make '--log' an integer option for number of shortlog entries
fmt_merge_msg: Change fmt_merge_msg API to accept shortlog_len
Conflicts:
builtin/merge.c
be a little more verbose about what each option does
Signed-off-by: Daniel Knittl-Frank <knittl89+git@googlemail.com>
Reviewed-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cherry-pick will segfault when transplanting a root commit if the --ff
option is used. This happens because the "parent" pointer is set to NULL
when the commit being cherry-picked has no parents. Later, when "parent"
is dereferenced, the cherry-pick segfaults.
Fix this by checking whether "parent" is NULL before dereferencing it and
add a test for this case of cherry-picking a root commit with --ff.
Reported-by: Zbyszek Szmek <zbyszek@in.waw.pl>
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When applying two pathspecs, one of which is named as a prefix to the
other, we mistakenly recursed into the shorter one.
Noticed and fixed by David Reis.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, read-tree can be run without tree-ish arguments, in which
case it will empty the index. Since this behavior is undocumented and
perhaps a bit too invasive to be the "default" action for read-tree,
deprecate it in favor of a new --empty option that does the same thing.
Signed-off-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Save future readers the trouble of tracing code to determine that the two
uses of branch->remote_name are safe when has_merge is set, by adding a
comment explaining that it is so.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make 'merge.log' an integer or boolean option to set the number of
shortlog entries to display in the merge commit. Note that it defaults
to false, and that true means a default value of 20. Also update
corresponding documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the command-line '--log' option from a boolean option to an
integer option, and parse the optional integer provided on the
command-line into the 'shortlog_len' variable. Also update the
documentation accordingly.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reported-by: Yaroslav Halchenko <debian@onerussian.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Johannes Sixt <j.sixt@viscovery.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give "shortlog_len" parameter to the fmt_merge_msg(), remove its
"merge_summary" parameter, and remove fmt_merge_msg_shortlog() function.
In the updated API, shortlog_len == 0 means no shortlog is given.
The parameter "merge_title" controls if the title of the merge commit is
autogenerated (it reads something like "Merge branch ..."), and typically
it is set to true when the caller does not give its own message.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Mentored-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-fetch-url-only:
builtin/fetch.c: ignore merge config when not fetching from branch's remote
t/t5510: demonstrate failure to fetch when current branch has merge ref
t9350 sets up a commit where a file is both copied and renamed. The output
of fast-export for this commit should look like this:
author ...
committer ...
from :19
C "file2" "file4"
R "file2" "file5"
The order of the two modification lines is derived from the result that
the diff machinery produces.
060df62 (fast-export: Fix output order of D/F changes) inserted a qsort
call that modifies the order of the diff result. Unfortunately, qsort need
not be stable. Therefore, it is possible that the 'R' line appears before
the 'C' line and the resulting fast-import stream is incorrect.
Fix it by forcing that the rename entry is printed after all other
modification lines with the same file name.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jl/submodule-ignore-diff:
checkout: Use submodule.*.ignore settings from .git/config and .gitmodules
checkout: Add test for diff.ignoreSubmodules
checkout: respect diff.ignoreSubmodules setting
Conflicts:
builtin/checkout.c
* dg/local-mod-error-messages:
t7609-merge-co-error-msgs: test non-fast forward case too.
Move "show_all_errors = 1" to setup_unpack_trees_porcelain()
setup_unpack_trees_porcelain: take the whole options struct as parameter
Move set_porcelain_error_msgs to unpack-trees.c and rename it
Conflicts:
merge-recursive.c
* jn/apply-filename-with-sp:
apply: handle traditional patches with space in filename
tests: exercise "git apply" with weird filenames
apply: split quoted filename handling into new function
* jn/merge-custom-no-trivial:
t7606: Avoid using head as a file name
merge: let custom strategies intervene in trivial merges
t7606 (merge-theirs): modernize style
* jn/merge-renormalize:
merge-recursive --renormalize
rerere: never renormalize
rerere: migrate to parse-options API
t4200 (rerere): modernize style
ll-merge: let caller decide whether to renormalize
ll-merge: make flag easier to populate
Documentation/technical: document ll_merge
merge-trees: let caller decide whether to renormalize
merge-trees: push choice to renormalize away from low level
t6038 (merge.renormalize): check that it can be turned off
t6038 (merge.renormalize): try checkout -m and cherry-pick
t6038 (merge.renormalize): style nitpicks
Don't expand CRLFs when normalizing text during merge
Try normalizing files to avoid delete/modify conflicts when merging
Avoid conflicts when merging branches with mixed normalization
Conflicts:
builtin/rerere.c
t/t4200-rerere.sh
This improves the usage output by adding builtin_merge_recursive_usage string
that follows the same pattern used by the other builtin commands.
The previous output for git merger-recursive was:
usage: merge-recursive <base>... -- <head> <remote> ...
Now the output is:
usage: git merge-recursive <base>... -- <head> <remote> ...
Since cmd_merge_recursive is used to handle four different commands we need
the %s in the usage string, so the following example:
$ git merge-subtree -h
Will output:
usage: git merge-subtree <base>... -- <head> <remote> ...
Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not only this makes the code clearer since setting up the porcelain error
message is meant to work with show_all_errors, but this fixes a call to
setup_unpack_trees_porcelain() in git_merge_trees() which did not set
show_all_errors.
add_rejected_path() used to double-check whether it was running in
plumbing mode. This check was ineffective since it was setting
show_all_errors too late for traverse_trees() to see it, and is made
useless by this patch. Remove it.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a preparation patch to let setup_unpack_trees_porcelain set
show_all_errors itself.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is currently dealing only with error messages, but the
intent of calling it is really to notify the unpack-tree mechanics that
it is running in porcelain mode.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
* en/d-f-conflict-fix:
merge-recursive: Avoid excessive output for and reprocessing of renames
merge-recursive: Fix multiple file rename across D/F conflict
t6031: Add a testcase covering multiple renames across a D/F conflict
merge-recursive: Fix typo
Mark tests that use symlinks as needing SYMLINKS prerequisite
t/t6035-merge-dir-to-symlink.sh: Remove TODO on passing test
fast-import: Improve robustness when D->F changes provided in wrong order
fast-export: Fix output order of D/F changes
merge_recursive: Fix renames across paths below D/F conflicts
merge-recursive: Fix D/F conflicts
Add a rename + D/F conflict testcase
Add additional testcases for D/F conflicts
Conflicts:
merge-recursive.c
* jn/paginate-fix:
t7006 (pager): add missing TTY prerequisites
merge-file: run setup_git_directory_gently() sooner
var: run setup_git_directory_gently() sooner
ls-remote: run setup_git_directory_gently() sooner
index-pack: run setup_git_directory_gently() sooner
config: run setup_git_directory_gently() sooner
bundle: run setup_git_directory_gently() sooner
apply: run setup_git_directory_gently() sooner
grep: run setup_git_directory_gently() sooner
shortlog: run setup_git_directory_gently() sooner
git wrapper: allow setup_git_directory_gently() be called earlier
setup: remember whether repository was found
git wrapper: introduce startup_info struct
Conflicts:
builtin/index-pack.c
* jn/maint-setup-fix:
setup: split off a function to handle ordinary .git directories
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
Conflicts:
builtin/index-pack.c
Extend remove_note() in the notes API to return whether or not a note was
actually removed. Use this in 'git notes remove' to skip the creation of
a notes commit when no notes were actually removed.
Also add a test illustrating the change in behavior.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For "git status" and the diff family the submodule.*.ignore settings from
.git/config and .gitmodules can be used to override the default set via
diff.ignoreSubmodules on a per-submodule basis. Let's do this consistently
and teach checkout to use these settings too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the topmost three commits in a branch were merge commits, 'git
format-patch -3' used to output nothing. Since Git can't prepare
patches out of merge commits anyway, don't go over them in the first
place. 'git format-patch -3' now prepares three patches from the
topmost three commits without counting merge commits. Also add a
corresponding test in t4014-format-patch and update documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When objectname:short was introduced, it forgot to copy the result of
find_unique_abbrev. Because the result of find_unique_abbrev is a
pointer to static buffer, this resulted in the same value being
substituted in for each ref.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the merge-recursive strategy a --patience option to use the
"patience diff" algorithm, which tends to improve results when
cherry-picking a patch that reorders functions at the same time as
refactoring them.
To support this, struct merge_options and ll_merge_options gain an
xdl_opts member, so programs can use arbitrary xdiff flags (think
"XDF_IGNORE_WHITESPACE") in a git-aware merge.
git merge and git rebase can be passed the -Xpatience option to
use this.
[jn: split from --ignore-space patch; with documentation]
Signed-off-by: Justin Frankel <justin@cockos.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Keeping track of the flag bits is proving more trouble than it's
worth. Instead, use a pointer to an options struct like most similar
APIs do.
Callers with no special requests can pass NULL to request the default
options.
Cc: Bert Wesarg <bert.wesarg@googlemail.com>
Cc: Avery Pennarun <apenwarr@gmail.com>
Helped-by: Justin Frankel <justin@cockos.com>
Helped-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two very similar blocks of code that recognize options for
the "recursive" merge strategy. Unify them.
No functional change intended.
Cc: Avery Pennarun <apenwarr@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git fetch' is supplied a single argument, it tries to match it
against a configured remote and then fetch the refs specified by the
named remote's fetchspec. Additionally, or alternatively, if the current
branch has a merge ref configured, and if the name of the remote supplied
to fetch matches the one in the branch's configuration, then git also adds
the merge ref to the list of refs to update.
If the argument to fetch does not specify a named remote, or if the name
supplied does not match the remote configured for the current branch, then
the current branch's merge configuration should not be considered.
git currently mishandles the case when the argument to fetch specifies a
GIT URL(i.e. not a named remote) and the current branch has a configured
merge ref. In this case, fetch should ignore the branch's merge ref and
attempt to fetch from the remote repository's HEAD branch. But, since
fetch only checks _whether_ the current branch has a merge ref configured,
and does _not_ check whether the branch's configured remote matches the
command line argument (until later), it will mistakenly enter the wrong
branch of an 'if' statement and will not fall back to fetch the HEAD branch.
The fetch ends up doing nothing and returns with a successful zero status.
Fix this by comparing the remote repository's name to the branch's remote
name, in addition to whether it has a configured merge ref, sooner, so that
fetch can correctly decide whether the branch's configuration is interesting
or not, and fall back to fetching from the remote's HEAD branch when
appropriate.
This fixes the test in t5510.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'git checkout' reports uncommitted changes, it also does so for
submodules.
The default mode is now to look really hard into submodules, not only
for different commits, but also for modified files. Since this can be
pretty expensive when there are a lot (and large) submodules, there is
the diff.ignoreSubmodules option.
Let's respect that setting when 'git checkout' reports the uncommitted
changes, since it does nothing else than a 'git diff --name-status'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We start the pager too early for several git commands, which results in
the errors sometimes going to the pager rather than show up as errors.
This is often hidden by the fact that we pass in '-X' to less by default,
which causes 'less' to exit for small output, but if you do
export LESS=-S
you can then clearly see the problem by doing
git log --prretty
which shows the error message ("fatal: unrecognized argument: --prretty")
being sent to the pager.
This happens for pretty much all git commands that use USE_PAGER, and then
check arguments separately. But "git diff" does it too early too (even
though it does an explicit setup_pager() call)
This only fixes it for the trivial "git log" family case.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dg/local-mod-error-messages:
t7609: test merge and checkout error messages
unpack_trees: group error messages by type
merge-recursive: distinguish "removed" and "overwritten" messages
merge-recursive: porcelain messages for checkout
Turn unpack_trees_options.msgs into an array + enum
Conflicts:
t/t3400-rebase.sh
When you call "git reset --mixed <paths>" git will warn that using mixed
with paths is deprecated:
warning: --mixed option is deprecated with paths.
That doesn't tell the user what he should use instead. Expand on the
warning and tell the user to just omit --mixed:
warning: --mixed with paths is deprecated; use 'git reset -- <paths>' instead
The exact wording of the warning was suggested by Jonathan Nieder.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To discover filenames from the --- and +++ lines in a traditional
unified diff, currently "git apply" scans forward for a whitespace
character on each line and stops there. It can't use the whole line
because "diff -u" likes to include timestamps, like so:
--- foo 2000-07-12 16:56:50.020000414 -0500
+++ bar 2010-07-12 16:56:50.020000414 -0500
The whitespace-seeking heuristic works great, even when the tab
has been converted to spaces by some email + copy-and-paste
related corruption.
Except for one problem: if the filename itself contains whitespace,
the inferred filename will be too short.
When Giuseppe ran into this problem, it was for a file creation
patch (for debian/licenses/LICENSE.global BSD-style Chromium).
So one can't use the list of files present in the index to deduce an
appropriate filename (not to mention that way lies madness; see
v0.99~402, 2005-05-31).
Instead, look for a timestamp and use that if present to mark the end
of the filename. If no timestamp is present, the old heuristic is
used, with one exception: the space character \040 is not considered
terminating whitespace any more unless it is followed by a timestamp.
Reported-by: Giuseppe Iuculano <iuculano@debian.org>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new find_name_gnu() function handles new-style '--- "a/foo"'
patch header lines, leaving find_name() itself a bit less
daunting.
Functional change: do not clobber the p-value when there are not
enough path components in a quoted file name to honor it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix "Switched to a new branch <name>" to read "Switched to branch
<name>" when <name> corresponds to an existing branch. This bug was
introduced in 02ac983 while introducing the `-B` switch.
Cc: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.1.1~23^2 (merge: --log appends shortlog to message if
specified, 2010-05-11), the fmt-merge-msg backend supports custom text
to override the merge title "Merge <foo> into <bar>".
Expose this functionality for scripted callers. Example:
git fmt-merge-msg --log -m \
"$(printf '%s\n' \
"Merge branch 'api-cleanup' into feature" \
'' \
'This is to use a few functions refactored for this purpose.'
)" <.git/FETCH_HEAD
Cc: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While show-branch --independent does not support more than MAX_REVS
revs, git internally supports more with a different algorithm.
Expose that functionality as "git merge-base --independent".
This should help scripts to catch up with builtin merge in supporting
dodecapus.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While show-branch --merge-base does not support more than MAX_REVS
revs, git supports more with a different algorithm
(v1.6.0-rc0~51^2~13, Introduce get_octopus_merge_bases() in commit.c,
2008-06-27). Expose that functionality.
This should help scripts to catch up with builtin merge in supporting
dodecapus.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If no branch 'foo' exists but a tag 'foo' does, then
git merge foo^ results in
Merge branch 'foo' (early part)
as a commit message, because the relevant code path checks that
refs/heads/foo is a valid refname for writing rather than for
reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/find-commit-subject:
blame: use find_commit_subject() instead of custom code
merge-recursive: use find_commit_subject() instead of custom code
bisect: use find_commit_subject() instead of custom code
revert: rename variables related to subject in get_message()
revert: refactor code to find commit subject in find_commit_subject()
revert: fix off by one read when searching the end of a commit subject
* jl/submodule-ignore-diff:
Add tests for the diff.ignoreSubmodules config option
Add the 'diff.ignoreSubmodules' config setting
Submodules: Use "ignore" settings from .gitmodules too for diff and status
Submodules: Add the new "ignore" config option for diff and status
Conflicts:
diff.c
* tc/checkout-B:
builtin/checkout: handle -B from detached HEAD correctly
builtin/checkout: learn -B
builtin/checkout: reword hint for -b
add tests for checkout -b
As v1.6.1-rc1~294^2 (2008-08-23) explains, custom merge strategies
do not even kick in when the merge is truly trivial. But they
should, since otherwise a custom “--strategy=theirs” is not useful.
Perhaps custom strategies should not allow fast-forward either. This
patch does not make that change, since it is less important (because
it is always possible to explicitly use --no-ff).
Reported-by: Yaroslav Halchenko <debian@onerussian.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to make repository-local configuration
available early (simplifying the startup sequence for
built-in commands).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to make repository-local configuration
available early (simplifying the startup sequence for
built-in commands).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
ls-remote already runs a repository search unconditionally to learn
about remote nicknames and "[url] insteadof" shortcuts. Run that
search a little sooner, and now one can try
[pager]
ls-remote
to automatically paginate ls-remote output, or use repository-local
[core]
pager = whatever
with "git --paginate ls-remote <url>".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
index-pack already runs a repository search unconditionally; running
such a search earlier is not risky and ensures GIT_DIR will be set
correctly if the configuration needs to be accessed from
run_builtin().
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jn/maint-setup-fix' (early part):
Revert "rehabilitate 'git index-pack' inside the object store"
setup: do not forget working dir from subdir of gitdir
t4111 (apply): refresh index before applying patches to it
setup: split off get_device_or_die helper
setup: split off a function to handle hitting ceiling in repo search
setup: split off code to handle stumbling upon a repository
setup: split off a function to checks working dir for .git file
setup: split off $GIT_DIR-set case from setup_git_directory_gently
tests: try git apply from subdir of toplevel
t1501 (rev-parse): clarify
For the pager choice (and the choice to paginate) to reflect the
current repository configuration, the repository needs to be
located first.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this change, “git -p bundle” does not always
respect the repository-local “[core] pager” setting.
It is hard to notice because subcommands other than
“git bundle unbundle” do not produce much output.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.2~16^2 (2010-07-14) explains, without this change,
“git --paginate apply” can ignore the repository-local
“[core] pager” configuration.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick fails after picking a large series of commits, it can
be hard to pick out the error message and advice. Prefix the advice
with “hint: ” to help.
Before:
error: could not apply 7ab78c9... foo
After resolving the conflicts,
mark the corrected paths with 'git add <paths>' or 'git rm <paths>'
and commit the result with:
git commit -c 7ab78c9a7898b87127365478431289cb98f8d98f
After:
error: could not apply 7ab78c9... foo
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit -c 7ab78c9'
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Encouraged-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick fails after picking a large series of commits, it can
be hard to pick out the error message and advice. Clarify the error
and prefix it with “error: ” to help.
Before:
Automatic cherry-pick failed. [...advice...]
After:
error: could not apply 7ab78c9... Do something neat.
[...advice...]
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Encouraged-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like error(), warn(), and die(), advise() prints a short message
with a formulaic prefix to stderr.
It is local to revert.c for now because I am not sure this is
the right API (we may want to take an array of advice lines or a
boolean argument for easy suppression of unwanted advice).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When cherry-pick was written (v0.99.6~63, 2005-08-27), “git commit”
was quiet, and the output from cherry-pick provided useful information
about the progress of a rebase.
Now next to the output from “git commit”, the cherry-pick notification
is so much noise (except for the name of the picked commit).
$ git cherry-pick ..topic
Finished cherry-pick of 499088b.
[detached HEAD 17e1ff2] Move glob module to libdpkg
Author: Guillem Jover <guillem@debian.org>
8 files changed, 12 insertions(+), 9 deletions(-)
rename {src => lib/dpkg}/glob.c (98%)
rename {src => lib/dpkg}/glob.h (93%)
Finished cherry-pick of ae947e1.
[detached HEAD 058caa3] libdpkg: Add missing symbols to Versions script
Author: Guillem Jover <guillem@debian.org>
1 files changed, 2 insertions(+), 0 deletions(-)
$
The noise is especially troublesome when sifting through the output of
a rebase or multiple cherry-pick that eventually failed.
With the commit subject, it is already not hard to figure out where
the commit came from. So drop the “Finished” message.
Cc: Christian Couder <chriscool@tuxfamily.org>
Cc: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, if remote.<name>.tagopt was set, the --tags and option would
have no effect when given to git fetch. So if
tagopt="--no-tags"
git fetch --tags
would not actually fetch tags.
This patch changes this behavior to only follow what is written in the
config if there is no option passed by the command line.
Signed-off-by: Daniel Johnson <ComputerDruid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
push: mention "git pull" in error message for non-fast forwards
Standardize do { ... } while (0) style
t/t7003: replace \t with literal tab in sed expression
index-pack: Don't follow replace refs.
