Previously, git remote update <remote> would fail unless there was
a remote group configured with the same name as the remote.
git remote update will now fall back to using the remote if no matching
group can be found.
This enables "git remote update -p <remote>..." to fetch and prune one
or more remotes, for example.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, there was no easy way to check for the existence of a
configured remote. remote_get for example would always create the remote
"on demand".
This new function returns 1 if the remote is configured, 0 otherwise.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previosly, git remote update <non-existing-group> would just silently fail
and do nothing. Now it will report an error saying that the group does
not exist.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/name-branch:
Don't permit ref/branch names to end with ".lock"
check_ref_format(): tighten refname rules
strbuf_check_branch_ref(): a helper to check a refname for a branch
Fix branch -m @{-1} newname
check-ref-format --branch: give Porcelain a way to grok branch shorthand
strbuf_branchname(): a wrapper for branch name shorthands
Rename interpret/substitute nth_last_branch functions
Conflicts:
Documentation/git-check-ref-format.txt
* jc/shared-literally:
t1301: loosen test for forced modes
set_shared_perm(): sometimes we know what the final mode bits should look like
move_temp_to_file(): do not forget to chmod() in "Coda hack" codepath
Move chmod(foo, 0444) into move_temp_to_file()
"core.sharedrepository = 0mode" should set, not loosen
* sb/format-patch-patchname:
format_sanitized_subject: Don't trim past initial length of strbuf
log-tree: fix patch filename computation in "git format-patch"
format-patch: --numbered-files and --stdout aren't mutually exclusive
format-patch: --attach/inline uses filename instead of SHA1
format-patch: move get_patch_filename() into log-tree
format-patch: pass a commit to reopen_stdout()
format-patch: construct patch filename in one function
pretty.c: add %f format specifier to format_commit_message()
A handful of random personal preference:
- Force sans-serif for the text.
- Quote code sample literal inside a single-quote pair.
- Show emphasis in blue-green italics.
- Do not use itarlics for term definition, but show them in navy.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you regularly create patches which require a Signed-off: line you may
want to make it your default to add that line. It also helps you not to forget
to add the -s/--signoff switch.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works around git-gui's error message
Cannot use funny .git directory: .
when started from the .git/ directory, which is useful in repositories
without any directories for the right click.
Now git-gui can be started via Windows Explorer shell extension (Git GUI
Here) from the .git/ directory.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Starting the Explorer from the git-gui menu "Explore Working Copy"
didn't work, when git-gui was started via Windows Explorer shell
extension (Git GUI Here) from a directory within the project.
The Explorer raised an error message like this:
Path "C:/somedir/worktree" is not available or not a directory
It worked when started from the project directory itself, because then
the path argument for the Explorer was just '.' (current directory)
without any problematic forward slashes.
To make it work, convert the path given as argument to explorer.exe to
its native format with backslashes.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui is using "git-read-tree -u" for checkout which doesn't
invoke the post-checkout hook as a plain git-checkout would.
So git-gui must call the hook itself.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Before calling the post-commit hook, the variable "pc_err" is cleared
while later only "pch_error" is used. "pch_error$cmt_id" only appeared in
"upvar"-Statements (which were changed to "global") and was removed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previously a hardcoded path $GIT_EXEC_PATH/../Documentation/ was used to
search for the documentation, when the user has asked for it via menu
"Help -> Online Documentation".
This didn't work for the default directory structure.
To find the path reliably, use the new git command line option, which
returns the correct path.
If the output of `git --html-path` is empty because git is not found or
the option is not yet supported in the installed git, the documentation
from kernel.org is launched. There is no additional guessing of the
right location of the installed docs.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds --committer-date-is-author-date, --ignore-date, and --no-utf8
options. The --binary option is removed, as it was made a no-op by
cb3a160. The option list is also sorted alphabetically.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the --prune (or -p) option, git remote update will also prune
all the remotes that it fetches. Previously, you had to do a manual
git remote prune <remote> for each of the remotes you wanted to
prune, and this could be tedious with many remotes.
A single command will now update a set of remotes, and remove all
stale branches: git remote update -p [group]
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prune_remote will be used in update(), so this function was split
out to avoid code duplication.
Signed-off-by: Finn Arne Gangstad <finnag@pvv.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When doing:
eval "git bisect--helper --next-vars" | {
while read line
do
echo "$line &&"
done
echo ':'
}
the result code comes from the last "echo ':'", not from running
"git bisect--helper --next-vars".
This patch gets rid of the need to string together the line from
the output of "git bisect--helper" with "&&" in the calling script
by making "git bisect--helper --next-vars" return output variables
already in that format.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of "int show_all, int show_tried" we now only pass "int flags",
because we will add one more flag in a later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds some tests to check that "git bisect" works fine when
passing paths to "git bisect start" to reduce the number of
bisection steps.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git bisect--helper" builtin. It should be faster and
safer instead of the old "filter_skipped" shell function. And it
is a first step to move more shell code to C.
As the output is a little bit different we have to change the code
that interpret the results. But these changes improve code clarity.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is needed because "git bisect--helper" must read bisect paths
in "$GIT_DIR/BISECT_NAMES", so that a bisection can be performed only
on commits that touches paths in this file.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "git bisect--helper" builtin plumbing
command that will be used to migrate "git-bisect.sh" to C.
We start by implementing only the "--next-vars" option that will
read bisect refs from "refs/bisect/", and then compute the next
bisect step, and output shell variables ready to be eval'ed by
the shell.
At this step, "git bisect--helper" ignores the paths that may
have been put in "$GIT_DIR/BISECT_NAMES". This will be fixed in a
later patch.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
instead of the specific one that was simpler but less efficient.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch implements a new "filter_skip" function in C in
"bisect.c" that will later replace the existing implementation in
shell in "git-bisect.sh".
An array is used to store the skipped commits. But the array is
not yet fed anything.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Actually, you have to set the -b option after the add command.
Signed-off-by: Julien Danjou <julien@danjou.info>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously we ignored the result of calling add_interactive,
which meant that if an error occurred we simply committed
whatever happened to be in the index.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code without changing the semantics and removes
the unhelpful "needs $sha1" part of the conflicting submodule message.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging merge bases during a recursive merge we do not want to
leave any unmerged entries. Otherwise we cannot create a temporary
tree for the recursive merge to work with.
We failed to do so in case of a submodule conflict between merge
bases, causing a NULL pointer dereference in the next step of the
recursive merge.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In "git-bisect.sh" the "git checkout" command is only used to
change the current branch, but it is used like this:
git checkout "$branch"
which will output the following misleading error message when
it fails:
error: pathspec 'foo' did not match any file(s) known to git.
This patch change the way we use "git checkout" like this:
git checkout "$branch" --
so that we will get the following error message:
fatal: invalid reference: foo
which is better.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can be used in GUIs to open installed HTML documentation in the
browser.
Signed-off-by: Markus Heidelberg <markus.heidelberg@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/sha1-bsearch: (95 commits)
patch-ids: use the new generic "sha1_pos" function to lookup sha1
sha1-lookup: add new "sha1_pos" function to efficiently lookup sha1
Update draft release notes to 1.6.3
GIT 1.6.2.2
send-email: ensure quoted addresses are rfc2047 encoded
send-email: correct two tests which were going interactive
Documentation: git-svn: fix trunk/fetch svn-remote key typo
Mailmap: Allow empty email addresses to be mapped
Cleanup warning about known issues in cvsimport documentation
Documentation: Remove an odd "instead"
send-email: ask_default should apply to all emails, not just the first
send-email: don't attempt to prompt if tty is closed
fix portability problem with IS_RUN_COMMAND_ERR
Documentation: use "spurious .sp" XSLT if DOCBOOK_SUPPRESS_SP is set
mailmap: resurrect lower-casing of email addresses
builtin-clone.c: no need to strdup for setenv
builtin-clone.c: make junk_pid static
git-svn: add a double quiet option to hide git commits
Update draft release notes to 1.6.2.2
Documentation: push.default applies to all remotes
...
instead of the specific one from which the new one has been copied.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function has been copied from the "patch_pos" function in
"patch-ids.c" but an additional parameter has been added.
The new parameter is a function pointer, that is used to access the
sha1 of an element in the table.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 6e18251 (send-email: refactor and ensure prompting doesn't loop
forever) introduced an ask function, which unfortunately had a nasty
bug. This caused it not to accept anything but the default reply to the
"Who should the emails appear to be from?" prompt, and nothing but
ctrl-d to the "Who should the emails be sent to?" and "Message-ID to be
used as In-Reply-To for the first email?" prompts.
This commit corrects the issues and adds a test to confirm the fix.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'git checkout <submodule>' should not update the submodule's
working directory, it should update the index. This is in line with
how submodules are handled in the rest of Git.
While at it, test 'git reset [<commit>] <submodule>', too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using multi-pass authentication methods, the curl library may
need to rewind the read buffers (depending on how much already has
been fed to the server) used for providing data to HTTP PUT, POST or
PROPFIND, and in order to allow the library to do so, we need to tell
it how by providing either an ioctl callback or a seek callback.
This patch adds an ioctl callback, which should be usable on older
curl versions (since 7.12.3) than the seek callback (introduced in
curl 7.18.0).
Some HTTP servers (such as Apache) give an 401 error reply immediately
after receiving the headers (so no data has been read from the read
buffers, and thus no rewinding is needed), but other servers (such
as Lighttpd) only replies after the whole request has been sent and
all data has been read from the read buffers, making rewinding necessary.
Signed-off-by: Martin Storsjo <martin@martin.st>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
