* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
Its documentation was removed by 6c96753 (Documentation/git-commit: rewrite
to make it more end-user friendly, 2006-12-08), even though it is referenced
from a few places, including builtin-commit.c (as part of the commentary in
the commit message template).
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prepare-commit-msg hook is run whenever a "fresh" commit message
is prepared, just before it is shown in the editor (if it is).
Its purpose is to modify the commit message in-place.
It takes one to three parameters. The first is the name of the file that
the commit log message. The second is the source of the commit message,
and can be: "message" (if a -m or -F option was given); "template" (if a
-t option was given or the configuration option commit.template is set);
"merge" (if the commit is a merge or a .git/MERGE_MSG file exists);
"squash" (if a .git/SQUASH_MSG file exists); or "commit", followed by
a commit SHA1 as the third parameter (if a -c, -C or --amend option
was given).
If its exit status is non-zero, git-commit will abort. The hook is
not suppressed by the --no-verify option, so it should not be used
as a replacement for the pre-commit hook.
The sample prepare-commit-msg comments out the `Conflicts:` part of
a merge's commit message; other examples are commented out, including
adding a Signed-off-by line at the bottom of the commit messsage,
that the user can then edit or discard altogether.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although we traditionally stripped away excess blank lines, trailing
whitespaces and lines that begin with "#" from the commit log message,
sometimes the message just has to be the way user wants it.
For instance, a commit message template can contain lines that begin with
"#", the message must be kept as close to its original source as possible
if you are converting from a foreign SCM, or maybe the message has a shell
script including its comments for future reference.
The cleanup modes are default, verbatim, whitespace and strip. The
default mode depends on if the message is being edited and will either
strip whitespace and comments (if editor active) or just strip the
whitespace (for where the message is given explicitely).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the --no-verify switch should mention the
commit-msg hook, not just the pre-commit hook.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not usually make sense to record a commit that has the exact
same tree as its sole parent commit and that is why git-commit prevents
you from making such a mistake, but when data from foreign scm is
involved, it is a different story. We are equipped to represent such an
(perhaps insane, perhaps by mistake, or perhaps done on purpose) empty
change, and it is better to represent it bypassing the safety valve for
native use.
This is primarily for use by foreign scm interface scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message in git-commit suggesting to use 'git rm --cached'
to unstage is just plain wrong. It really should mention 'git reset'.
Suggested by Jan Hudec.
Signed-off-by: Jing Xue <jingxue@digizenstudio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with git-add, I think previous updates to the git-commit man page did
indeed help make it more user-friendly. But I think the banishment of
the word "index" from the description goes too far; reinstate its use,
to simplify some of the language slightly and smooth the transition to
other documentation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add it to the list in config.txt and explicitly say that the
--template option to git-commit overrides the configuration variable.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These are useful in organizations that enforce particular formats
for commit messages, e.g., to specify bug IDs or test plans.
Use of the template is not enforced; it is simply used as the
initial content when the editor is invoked.
Signed-off-by: Steven Grimm <koreth@midwinter.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These variables let you specify an editor that will be launched in
preference to the EDITOR and VISUAL environment variables. The order
of preference is GIT_EDITOR, core.editor, EDITOR, VISUAL.
[jc: added a test and config variable documentation]
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Documentation based on description of commit 443f8338 which added
'-u'|'--untracked-files' option to git-status, and on git-runstatus(1)
man page.
Note that those options apply also to git-status.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Document that '--message=<msg>' is long version of '-m <msg>' in
git-commit, and that '--no-checkout' is long version of '-n' in
git-clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --interactive option behaves like "git commit", except that
"git add --interactive" is executed before committing. It is
incompatible with -a and -i.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to get the following confusing error message:
$ git commit --amend -a -m foo
Option -m cannot be combined with -c/-C/-F
This is because --amend cannot be combined with -c/-C/-F, which makes
sense, because they try to handle the same log message in different ways.
So update the documentation to reflect this.
Signed-off-by: Peter Eriksen <s022018@student.dtu.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Despite what the documentation claims, git-commit does not check commit
for suspicious lines: all hooks are disabled by default,
and the pre-comit hook could be changed to do something else.
Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is nicer to let the user know when a commit succeeded all the time,
not only the first time. Also the commit sha1 is much more useful than
the tree sha1 in this case.
This patch also introduces a -q switch to supress this message as well
as the summary of created/deleted files.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A bare "--" doesn't show up in man or html pages correctly
as two individual dashes unless backslashed as \--
in the asciidoc source. Note, no backslash is needed
inside a literal block.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Once the content has been generated, the formatting elves can reorder
it to be pretty...
Signed-off-by: Francis Daly <francis@daoine.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The "--amend" option is used to amend the tip of the current branch. This
documentation text was copied straight from the commit that implemented it.
Some minor format tweaks for asciidoc were taken from work by Francis Daly
in commit b0d08a5.. It looks good now also in the html page.
[jc: amended further to follow the recommendation by Francis in
commit 3070b60].
Signed-off-by: Marco Roeland <marco.roeland@xs4all.nl>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the "git commit paths..." to default to --only
semantics from traditional --include semantics, as agreed on the
list.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- "git commit" without _any_ parameter keeps the traditional
behaviour. It commits the current index.
We commit the whole index even when this form is run from a
subdirectory.
- "git commit --include paths..." (or "git commit -i paths...")
is equivalent to:
git update-index --remove paths...
git commit
- "git commit paths..." acquires a new semantics. This is an
incompatible change that needs user training, which I am
still a bit reluctant to swallow, but enough people seem to
have complained that it is confusing to them. It
1. refuses to run if $GIT_DIR/MERGE_HEAD exists, and reminds
trained git users that the traditional semantics now needs
-i flag.
2. refuses to run if named paths... are different in HEAD and
the index (ditto about reminding). Added paths are OK.
3. reads HEAD commit into a temporary index file.
4. updates named paths... from the working tree in this
temporary index.
5. does the same updates of the paths... from the working
tree to the real index.
6. makes a commit using the temporary index that has the
current HEAD as the parent, and updates the HEAD with this
new commit.
- "git commit --all" can run from a subdirectory, but it updates
the index with all the modified files and does a whole tree
commit.
- In all cases, when the command decides not to create a new
commit, the index is left as it was before the command is
run. This means that the two "git diff" in the following
sequence:
$ git diff
$ git commit -a
$ git diff
would show the same diff if you abort the commit process by
making the commit log message empty.
This commit also introduces much requested --author option.
$ git commit --author 'A U Thor <author@example.com>'
Signed-off-by: Junio C Hamano <junkio@cox.net>
Minor copyediting of recent additions to git-commit and git-reset
documentation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In addition, also fixes a few synopses to be more consistent and a gitlink.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Morten Welinder says examples of resetting is really about
recovering from botched commit/pulls. I agree that pointers
from commands that cause a reset to be needed in the first place
would be very helpful.
Also reset examples did not mention "pull/merge" cases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Added the following long options to documentation:
* --all
* --signoff
* --verify
* --no-verify
* --edit
Also added documentation for the -- option for terminating option parsing.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The synopsis of the manpages should use the hyphenated version of the git
commands. Adapt the remaining offenders.
Signed-off-by: Christian Meder <chris@absolutegiganten.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
2005-09-07 17:45:20 -07:00
Renamed from Documentation/git-commit-script.txt (Browse further)
