We allow UNINTERESTING objects in a traversal to be
unavailable. As part of this, mark_parents_uninteresting()
checks whether we have a particular uninteresting parent; if
not, we will mark it as "parsed" so that later code skips
it.
This code is redundant and even a little bit harmful, so
let's drop it.
It's redundant because when our parse_object() call in
add_parents_to_list() fails, we already quietly skip
UNINTERESTING parents. This redundancy is a historical
artifact. The mark_parents_uninteresting() protection is
from 454fbbcde3 (git-rev-list: allow missing objects when
the parent is marked UNINTERESTING, 2005-07-10). Much later,
aeeae1b771 (revision traversal: allow UNINTERESTING objects
to be missing, 2009-01-27) covered more cases by making the
actual parse more gentle.
As an aside, even if this weren't redundant, it would be
insufficient. The gentle parsing handles both missing and
corrupted objects, whereas the has_object_file() check
we're getting rid of covers only missing ones.
And the code we're dropping is harmful for two reasons:
1. We spend extra time on the object lookup, even though
we don't actually need the information at this point
(and will just repeat that lookup later when we parse
for the common case that we _do_ have the object).
2. It "lies" about the commit by setting the parsed flag,
even though we didn't load any useful data into the
struct. This shouldn't matter for the UNINTERESTING
case, but we may later clear our flags and do another
traversal in the same process. While pretty unlikely,
it's possible that we could then look at the same
commit without the UNINTERESTING flag, in which case
we'd produce the wrong result (we'd think it's a commit
with no parents, when in fact we should probably die
due to the missing object).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's generally acceptable for UNINTERESTING objects in a
traversal to be unavailable (e.g., see aeeae1b771). When
marking trees UNINTERESTING, we access the object database
twice: once to check if the object is missing (and return
quietly if it is), and then again to actually parse it.
We can instead just try to parse; if that fails, we can then
return quietly. That halves the effort we spend on locating
the object.
Note that this isn't _exactly_ the same as the original
behavior, as the parse failure could be due to other
problems than a missing object: it could be corrupted, in
which case the original code would have died. But the new
behavior is arguably better, as it covers the object being
unavailable for any reason. We'll also still issue a warning
to stderr in such a case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On linux 64-bit architecture, pahole finds that there's a 4 bytes
padding after 'index'. Moving it to the end reduces this struct's size
from 72 to 64 bytes (because of another 4 bytes padding after
graph_pos). On linux 32-bit, the struct size remains 52 bytes like
before.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After performing a merge that has conflicts git status will, by default,
attempt to detect renames which causes many objects to be examined. In a
virtualized repo, those objects do not exist locally so the rename logic
triggers them to be fetched from the server. This results in the status call
taking hours to complete on very large repos vs seconds with this patch.
Add a new config status.renames setting to enable turning off rename
detection during status and commit. This setting will default to the value
of diff.renames.
Add a new config status.renamelimit setting to to enable bounding the time
spent finding out inexact renames during status and commit. This setting
will default to the value of diff.renamelimit.
Add --no-renames command line option to status that enables overriding the
config setting from the command line. Add --find-renames[=<n>] command line
option to status that enables detecting renames and optionally setting the
similarity index.
Reviewed-by: Elijah Newren <newren@gmail.com>
Original-Patch-by: Alejandro Pauly <alpauly@microsoft.com>
Signed-off-by: Ben Peart <Ben.Peart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default we want to fill the whole screen if possible, but we do not
want to use up _all_ terminal columns because the last character is
going hit the border, push the cursor over and wrap. Keep it at
default value zero, which will make print_columns() set the width at
term_columns() - 1.
This affects the test in t7004 because effective column width before
was 40 but now 39 so we need to compensate it by one or the output at
39 columns has a different layout.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After we invoke the pager, our stdout goes to a pipe, not the
terminal, meaning we can no longer use an ioctl to get the
terminal width. For that reason, ad6c3739a3 (pager: find out
the terminal width before spawning the pager, 2012-02-12)
started caching the terminal width.
But that cache is only an in-process variable. Any programs
we spawn will also not be able to run that ioctl, but won't
have access to our cache. They'll end up falling back to our
80-column default.
You can see the problem with:
git tag --column=row
Since git-tag spawns a pager these days, its spawned
git-column helper will see neither the terminal on stdout
nor a useful COLUMNS value (assuming you do not export it
from your shell already). And you'll end up with 80-column
output in the pager, regardless of your terminal size.
We can fix this by setting COLUMNS right before spawning the
pager. That fixes this case, as well as any more complicated
ones (e.g., a paged program spawns another script which then
generates columnized output).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the documentation, it is possible to "specify 40 '0' or an
empty string as <oldvalue> to make sure that the ref you are creating
does not exist." But in the code for pseudorefs, we do not implement
this, as demonstrated by the failing tests added in the previous commit.
If we fail to read the old ref, we immediately die. But a failure to
read would actually be a good thing if we have been given the zero oid.
With the zero oid, allow -- and even require -- the ref-reading to fail.
This implements the "make sure that the ref ... does not exist" part of
the documentation and fixes both failing tests from the previous commit.
Since we have a `strbuf err` for collecting errors, let's use it and
signal an error to the caller instead of dying hard.
Reported-by: Rafael Ascensão <rafa.almas@gmail.com>
Helped-by: Rafael Ascensão <rafa.almas@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I have not been able to find any tests around adding pseudorefs using
`git update-ref`. Add some as outlined in this table (original design by
Michael Haggerty; modified and extended by me):
Pre-update value | ref-update old OID | Expected result
-------------------|----------------------|----------------
missing | value | reject
missing | none given | accept
set | none given | accept
set | correct value | accept
set | wrong value | reject
missing | zero | accept *
set | zero | reject *
The tests marked with a * currently fail, despite git-update-ref(1)
claiming that it is possible to "specify 40 '0' or an empty string as
<oldvalue> to make sure that the ref you are creating does not exist."
These failing tests will be fixed in the next commit.
It is only natural to test deletion as well. Test deletion without an
old OID, with a correct one and with an incorrect one.
Suggested-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have two error messages that complain about the "sha1". Because we
are about to touch one of these sites and add some tests, let's first
modernize the messages to say "object ID" instead.
While at it, make the second one use `error()` instead of `warning()`.
After printing the message, we do not continue, but actually drop the
lock and return -1 without deleting the pseudoref.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current document mentions OBJ_* constants without their actual
values. A git developer would know these are from cache.h but that's
not very friendly to a person who wants to read this file to implement
a pack file parser.
Similarly, the deltified representation is not documented at all (the
"document" is basically patch-delta.c). Translate that C code to
English with a bit more about what ofs-delta and ref-delta mean.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We're not really removing slashes, but slash-separated path
components. Let's make that more clear.
Reported-by: kelly elton <its.the.doc@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
b2dc968e60 (t5516: refactor oddball tests, 2008-11-07) accidentaly
broke the &&-chain in the test 'push does not update local refs on
failure', but since it was in a subshell, chain-lint couldn't notice
it.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a while-at-it cleanup replacing a 'cd dir && <...> && cd ..' with a
subshell, commit 28391a80a9 (receive-pack: allow deletion of corrupt
refs, 2007-11-29) also moved the assignment of the $old_commit
variable to that subshell. This variable, however, is used outside of
that subshell as a parameter of check_push_result(), to check that a
ref still points to the commit where it is supposed to. With the
variable remaining unset outside the subshell check_push_result()
doesn't perform that check at all.
Use 'git -C <dir> cmd...', so we don't need to change directory, and
thus don't need the subshell either when setting $old_commit.
Furthermore, change check_push_result() to require at least three
parameters (the repo, the oid, and at least one ref), so it will catch
similar issues earlier should they ever arise.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The two JGit tests 'we can read jgit bitmaps' and 'jgit can read our
bitmaps' in 't5310-pack-bitmaps.sh' fail when run with
GIT_TEST_SPLIT_INDEX=YesPlease. Both tests create a clone of the test
repository to check bitmap interoperability with JGit. With split
indexes enabled the index in the clone repositories contains the
'link' extension, which JGit doesn't support and, consequently, an
exception aborts it:
<...>
org.eclipse.jgit.api.errors.JGitInternalException: DIRC extension 'link' not supported by this version.
at org.eclipse.jgit.dircache.DirCache.readFrom(DirCache.java:562)
<...>
Since testing bitmaps doesn't need a worktree in the first place,
let's just create bare clones for the two JGit tests, so the cloned
won't have an index, and these two tests can be executed even with
split index enabled.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit dc8441fdb ("config: don't implicitly use gitdir or commondir",
2017-06-14) the function git_config_with_options was renamed to
config_with_options to better reflect the fact that it does not access
the git global config or the repo config by default.
However Documentation/technical/api-config.txt still refers to the
previous name, fix that.
While at it also update the documentation about the extra parameters,
because they too changed since the initial definition.
Signed-off-by: Antonio Ospite <ao2@ao2.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This was missed in 5982da9d2c (replace-object: allow
prepare_replace_object to handle arbitrary repositories, 2018-04-11)
Technically the code works correctly as the replace_map is the same
size in different repositories, however it is hard to read. So convert
the code to the familiar pattern of dereferencing the pointer that we
assign in the sizeof itself.
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The replace map for objects was missed to free in the object store in
the conversion of 174774cd51 (Merge branch 'sb/object-store-replace',
2018-05-08)
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
the_repository is special. One of the special things about it is that
it does not allocate a new index_state object like submodules but
points to the global the_index variable instead. As a global variable,
the_index cannot be free()'d.
Add an exception for this in repo_clear(). In the future perhaps we
would be able to allocate the_repository's index on heap too. Then we
can revert this.
the_repository->index remains pointed to a clean the_index even after
repo_clear() so that it could still be used next time (e.g. in a crazy
use case where a dev switches repo in the same process).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clang 6 reports the following warning, which is turned into an error in a
DEVELOPER build:
builtin/fast-export.c:162:28: error: performing pointer arithmetic on a null pointer has undefined behavior [-Werror,-Wnull-pointer-arithmetic]
return ((uint32_t *)NULL) + mark;
~~~~~~~~~~~~~~~~~~ ^
1 error generated.
The compiler is correct, and the error message speaks for itself. There
is no need for any undefined operation -- just cast mark to void * or
uint32_t after an intermediate cast to uintptr_t. That encodes the
integer value into a pointer and later decodes it as intended.
While at it remove an outdated comment -- intptr_t has been used since
ffe659f94d (parse-options: make some arguments optional, add callbacks),
committed in October 2007.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing `struct lock_file`s on the stack used to be a bad idea, because
the temp- and lockfile-machinery would keep a pointer into the struct.
But after 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05), we can safely have lockfiles on the stack. (This applies
even if a user returns early, leaving a locked lock behind.)
Each of these `struct lock_file`s is used from within a single function.
Move them into the respective functions to make the scope clearer and
drop the staticness.
For good measure, I have inspected these sites and come to believe that
they always release the lock, with the possible exception of bailing out
using `die()` or `exit()` or by returning from a `cmd_foo()`.
As pointed out by Jeff King, it would be bad if someone held on to a
`struct lock_file *` for some reason. After some grepping, I agree with
his findings: no-one appears to be doing that.
After this commit, the remaining occurrences of "static struct
lock_file" are locks that are used from within different functions. That
is, they need to remain static. (Short of more intrusive changes like
passing around pointers to non-static locks.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Placing `struct lock_file`s on the stack used to be a bad idea, because
the temp- and lockfile-machinery would keep a pointer into the struct.
But after 076aa2cbd (tempfile: auto-allocate tempfiles on heap,
2017-09-05), we can safely have lockfiles on the stack. (This applies
even if a user returns early, leaving a locked lock behind.)
These `struct lock_file`s are local to their respective functions and we
can drop their staticness.
For good measure, I have inspected these sites and come to believe that
they always release the lock, with the possible exception of bailing out
using `die()` or `exit()` or by returning from a `cmd_foo()`.
As pointed out by Jeff King, it would be bad if someone held on to a
`struct lock_file *` for some reason. After some grepping, I agree with
his findings: no-one appears to be doing that.
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After taking the lock we check whether we got it and die otherwise. But
since we take the lock using `LOCK_DIE_ON_ERROR`, we would already have
died.
Considering the choice between dropping the dead code and dropping the
flag, let's go for option number three: Drop the flag, write an error
instead of dying, then return -1. This function already returns -1 for
another error, so the caller (or rather, its callers) should be able to
handle this. There is some inconsistency around how we handle errors in
this function and elsewhere in this file, but let's take this small step
towards gentle error-reporting now and leave the rest for another time.
While at it, make the lock non-static and reduce its scope. (Placing
`struct lock_file`s on the stack used to be a bad idea, because the
temp- and lockfile-machinery would keep a pointer into the struct. But
after 076aa2cbd (tempfile: auto-allocate tempfiles on heap, 2017-09-05),
we can safely have lockfiles on the stack.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we could not take the lock, we add an error to the `strbuf err` and
return. However, this code is dead. The reason is that we take the lock
using `LOCK_DIE_ON_ERROR`. Drop the flag to allow our more gentle
error-handling to actually kick in.
We could instead just drop the dead code and die here. But everything is
prepared for gently propagating the error, so let's do that instead.
There is similar dead code in `delete_pseudoref()`, but let's save that
for the next patch.
While at it, make the lock non-static. (Placing `struct lock_file`s on
the stack used to be a bad idea, because the temp- and
lockfile-machinery would keep a pointer into the struct. But after
076aa2cbd (tempfile: auto-allocate tempfiles on heap, 2017-09-05), we
can safely have lockfiles on the stack.)
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Die in case writing the index fails, so that the caller can notice
(instead of, say, being impressed by how performant the writing is).
While at it, note that after opening a lock with `LOCK_DIE_ON_ERROR`, we
do not need to worry about whether we succeeded. Also, we can move the
`struct lock_file` into the function and drop the staticness. (Placing
`struct lock_file`s on the stack used to be a bad idea, because the
temp- and lockfile-machinery would keep a pointer into the struct. But
after 076aa2cbd (tempfile: auto-allocate tempfiles on heap, 2017-09-05),
we can safely have lockfiles on the stack.)
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test script 't6050-replace.sh' starts off with redirecting the
whole test script's stdin from /dev/null. This redirection has been
there since the test script was introduced in a3e8267225
(replace_object: add a test case, 2009-01-23), but the commit message
doesn't explain why it was deemed necessary. AFAICT, it has never
been necessary, and t6050 runs just fine and succeeds even without it,
not only the current version but past versions as well.
Besides being unnecessary, this redirection is also harmful, as it
prevents the test helper functions 'test_pause' and 'debug' from
working properly in t6050, because we can't enter any commands to the
shell and the debugger, respectively.
So let's remove that redirection.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Set aggressive flag in git_merge_trees() when rename detection is turned off.
This allows read_tree() to auto resolve more cases that would have otherwise
been handled by the rename detection.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to control rename detection for merge via a config setting.
This setting behaves the same and defaults to the value of diff.renames but only
applies to merge.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Helped-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the documentation to better indicate that the renameLimit setting is
ignored if rename detection is turned off via command line options or config
settings.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The can-working-tree-updates-be-skipped check has had a long and blemished
history. The update can be skipped iff:
a) The merge is clean
b) The merge matches what was in HEAD (content, mode, pathname)
c) The target path is usable (i.e. not involved in D/F conflict)
Traditionally, we split b into parts:
b1) The merged result matches the content and mode found in HEAD
b2) The merged target path existed in HEAD
Steps a & b1 are easy to check; we have always gotten those right. While
it is easy to overlook step c, this was fixed seven years ago with commit
4ab9a157d0 ("merge_content(): Check whether D/F conflicts are still
present", 2010-09-20). merge-recursive didn't have a readily available
way to directly check step b2, so various approximations were used:
* In commit b2c8c0a762 ("merge-recursive: When we detect we can skip
an update, actually skip it", 2011-02-28), it was noted that although
the code claimed it was skipping the update, it did not actually skip
the update. The code was made to skip it, but used lstat(path, ...)
as an approximation to path-was-tracked-in-index-before-merge.
* In commit 5b448b8530 ("merge-recursive: When we detect we can skip
an update, actually skip it", 2011-08-11), the problem with using
lstat was noted. It was changed to the approximation
path2 && strcmp(path, path2)
which is also wrong. !path2 || strcmp(path, path2) would have been
better, but would have fallen short with directory renames.
* In c5b761fb27 ("merge-recursive: ensure we write updates for
directory-renamed file", 2018-02-14), the problem with the previous
approximation was noted and changed to
was_tracked(path)
That looks close to what we were trying to answer, but was_tracked()
as implemented at the time should have been named is_tracked(); it
returned something different than what we were looking for.
* To make matters more complex, fixing was_tracked() isn't sufficient
because the splitting of b into b1 and b2 is wrong. Consider the
following merge with a rename/add conflict:
side A: modify foo, add unrelated bar
side B: rename foo->bar (but don't modify the mode or contents)
In this case, the three-way merge of original foo, A's foo, and B's
bar will result in a desired pathname of bar with the same
mode/contents that A had for foo. Thus, A had the right mode and
contents for the file, and it had the right pathname present (namely,
bar), but the bar that was present was unrelated to the contents, so
the working tree update was not skippable.
Fix this by introducing a new function:
was_tracked_and_matches(o, path, &mfi.oid, mfi.mode)
and use it to directly check for condition b.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, merge_content() would print "Auto-merging" whenever the final
content and mode aren't already available from HEAD. There are a few
problems with this:
1) There are other code paths doing merges that should probably have the
same message printed, in particular rename/rename(2to1) which cannot
call into the normal rename logic.
2) If both sides of the merge have modifications, then a content merge
is needed. It may turn out that the end result matches one of the
sides (because the other only had a subset of the same changes), but
the merge was still needed. Currently, the message will not print in
that case, though it seems like it should.
Move the printing of this message to merge_file_1() in order to address
both issues.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
was_dirty() uses was_tracked(), which has been updated to use the original
index rather than the current one. However, was_dirty() also had a
separate call to cache_file_exists(), causing it to still implicitly use
the current index. Update that to instead use index_file_exists().
Also, was_dirty() had a hack where it would mark any file as non-dirty if
we simply didn't know its modification time. This was due to using the
current index rather than the original index, because D/F conflicts and
such would cause unpack_trees() to not copy the modification times from
the original index to the current one. Now that we are using the original
index, we can dispense with this hack.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit aacb82de3f ("merge-recursive: Split was_tracked() out of
would_lose_untracked()", 2011-08-11), was_tracked() was split out of
would_lose_untracked() with the intent to provide a function that could
answer whether a path was tracked in the index before the merge. Sadly,
it instead returned whether the path was in the working tree due to having
been tracked in the index before the merge OR having been written there by
unpack_trees(). The distinction is important when renames are involved,
e.g. for a merge where:
HEAD: modifies path b
other: renames b->c
In this case, c was not tracked in the index before the merge, but would
have been added to the index at stage 0 and written to the working tree by
unpack_trees(). would_lose_untracked() is more interested in the
in-working-copy-for-either-reason behavior, while all other uses of
was_tracked() want just was-it-tracked-in-index-before-merge behavior.
Unsplit would_lose_untracked() and write a new was_tracked() function
which answers whether a path was tracked in the index before the merge
started.
This will also affect was_dirty(), helping it to return better results
since it can base answers off the original index rather than an index that
possibly only copied over some of the stat information. However,
was_dirty() will need an additional change that will be made in a
subsequent patch.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add several tests checking whether updates can be skipped in a merge.
Also add several similar testcases for where updates cannot be skipped in
a merge to make sure that we skip if and only if we should.
In particular:
* Testcase 1a (particularly 1a-check-L) would have pointed out the
problem Linus has been dealing with for year with his merges[1].
* Testcase 2a (particularly 2a-check-L) would have pointed out the
problem with my directory-rename-series before it broke master[2].
* Testcases 3[ab] (particularly 3a-check-L) provide a simpler testcase
than 12b of t6043 making that one easier to understand.
* There are several complementary testcases to make sure we're not just
fixing those particular issues while regressing in the opposite
direction.
* There are also a pair of tests for the special case when a merge
results in a skippable update AND the user has dirty modifications to
the path.
[1] https://public-inbox.org/git/CA+55aFzLZ3UkG5svqZwSnhNk75=fXJRkvU1m_RHBG54NOoaZPA@mail.gmail.com/
[2] https://public-inbox.org/git/xmqqmuya43cs.fsf@gitster-ct.c.googlers.com/
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a cherry-pick or merge with a rename results in a skippable update
(due to the merged content matching what HEAD already had), but the
working directory is dirty, avoid trying to refresh the index as that
will fail.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
conflict_rename_normal() was doing some handling for dirty files that
more naturally belonged in merge_content. Move it, and rename a
parameter for clarity while at it.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Four closely related changes all with the purpose of fixing error handling
in this function:
- fix reported function name in add_cacheinfo error messages
- differentiate between the two error messages
- abort early when we hit the error (stop ignoring return code)
- mark a test which was hitting this error as failing until we get the
right fix
In more detail...
In commit 0424138d57 ("Fix bogus error message from merge-recursive
error path", 2007-04-01), it was noted that the name of the function which
the error message claimed it was reported from did not match the actual
function name. This was changed to something closer to the real function
name, but it still didn't match the actual function name. Fix the
reported name to match.
Second, the two errors in this function had identical messages, preventing
us from knowing which error had been triggered. Add a couple words to the
second error message to differentiate the two.
Next, make sure callers do not ignore the return code so that it will stop
processing further entries (processing further entries could result in
more output which could cause the error to scroll off the screen, or at
least be missed by the user) and make it clear the error is the cause of
the early abort. These errors should never be triggered in production; if
either one is, it represents a bug in the calling path somewhere and is
likely to have resulted in mis-merged content. The combination of
ignoring of the return code and continuing to print other standard
messages after hitting the error resulted in the following bug report from
Junio: "...the command pretends that everything went well and merged
cleanly in that path...[Behaving] in a buggy and unexplainable way is bad
enough, doing so silently is unexcusable." Fix this.
Finally, there was one test in the testsuite that did hit this error path,
but was passing anyway. This would have been easy to miss since it had a
test_must_fail and thus could have failed for the wrong reason, but in a
separate testing step I added an intentional NULL-dereference to the
codepath where these error messages are printed in order to flush out such
cases. I could modify that test to explicitly check for this error and
fail the test if it is hit, but since this test operates in a bit of a
gray area and needed other changes, I went for a different fix. The gray
area this test operates in is the following: If the merge of a certain
file results in the same version of the file that existed in HEAD, but
there are dirty modifications to the file, is that an error with a
"Refusing to overwrite existing file" expected, or a case where the merge
should succeed since we shouldn't have to touch the dirty file anyway?
Recent discussion on the list leaned towards saying it should be a
success. Therefore, change the expected behavior of this test to match.
As a side effect, this makes the failed-due-to-hitting-add_cacheinfo-error
very clear, and we can mark the test as test_expect_failure. A subsequent
commit will implement the necessary changes to get this test to pass
again.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a file on one side of history was renamed, and merely modified on the
other side, then applying a directory rename to the modified side gives us
a rename/rename(1to2) conflict. We should only apply directory renames to
pairs representing either adds or renames.
Making this change means that a directory rename testcase that was
previously reported as a rename/delete conflict will now be reported as a
modify/delete conflict.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a testcase showing spurious rename/rename(1to2) conflicts occurring
due to directory rename detection.
Also add a pair of testcases dealing with moving directory hierarchies
around that were suggested by Stefan Beller as "food for thought" during
his review of an earlier patch series, but which actually uncovered a
bug. Round things out with a test that is a cross between the two
testcases that showed existing bugs in order to make sure we aren't
merely addressing problems in isolation but in general.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an issue that existed before my directory rename detection
patches that affects both normal renames and renames implied by
directory rename detection. Additional codepaths that only affect
overwriting of dirty files that are involved in directory rename
detection will be added in a subsequent commit.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit hooks together all the directory rename logic by making the
necessary changes to the rename struct, it's dst_entry, and the
diff_filepair under consideration.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_renames() would look up stage data that already existed (populated
in get_unmerged(), taken from whatever unpack_trees() created), and if
it didn't exist, would call insert_stage_data() to create the necessary
entry for the given file. The insert_stage_data() fallback becomes
much more important for directory rename detection, because that creates
a mechanism to have a file in the resulting merge that didn't exist on
either side of history. However, insert_stage_data(), due to calling
get_tree_entry() loaded up trees as readily as files. We aren't
interested in comparing trees to files; the D/F conflict handling is
done elsewhere. This code is just concerned with what entries existed
for a given path on the different sides of the merge, so create a
get_tree_entry_if_blob() helper function and use it.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before trying to apply directory renames to paths within the given
directories, we want to make sure that there aren't conflicts at the
file level either. If there aren't any, then get the new name from
any directory renames.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
directory renaming and merging can cause one or more files to be moved to
where an existing file is, or to cause several files to all be moved to
the same (otherwise vacant) location. Add checking and reporting for such
cases, falling back to no-directory-rename handling for such paths.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before trying to apply directory renames to paths within the given
directories, we want to make sure that there aren't conflicts at the
directory level. There will be additional checks at the individual
file level too, which will be added later.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This populates a set of directory renames for us. The set of directory
renames is not yet used, but will be in subsequent commits.
Note that the use of a string_list for possible_new_dirs in the new
dir_rename_entry struct implies an O(n^2) algorithm; however, in practice
I expect the number of distinct directories that files were renamed into
from a single original directory to be O(1). My guess is that n has a
mode of 1 and a mean of less than 2, so, for now, string_list seems good
enough for possible_new_dirs.
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git http-fetch" (deprecated) had an optional and experimental
"feature" to fetch only commits and/or trees, which nobody used.
This has been removed.
* ma/http-walker-no-partial:
walker: drop fields of `struct walker` which are always 1
http-fetch: make `-a` standard behaviour
