This will make it easier to manage the buffer cache
independently of the "struct commit" objects. It also
shrinks "struct commit" by one pointer, which may be
helpful.
Unfortunately it does not reduce the max memory size of
something like "rev-list", because rev-list uses
get_cached_commit_buffer() to decide not to show each
commit's output (and due to the design of slab_at, accessing
the slab requires us to extend it, allocating exactly the
same number of buffer pointers we dropped from the commit
structs).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Callers currently must use init_foo_slab() at runtime before
accessing a slab. For global slabs, it's much nicer if we
can initialize them in BSS, so that each user does not have
to add code to check-and-initialize.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these sites assumes that commit->buffer is valid.
Since they would segfault if this was not the case, they are
likely to be correct in practice. However, we can
future-proof them by using get_commit_buffer.
And as a side effect, we abstract away the final bare uses
of commit->buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like the callsites in the previous commit, logmsg_reencode
already falls back to read_sha1_file when necessary.
However, I split its conversion out into its own commit
because it's a bit more complex.
We return either:
1. The original commit->buffer
2. A newly allocated buffer from read_sha1_file
3. A reencoded buffer (based on either 1 or 2 above).
while trying to do as few extra reads/allocations as
possible. Callers currently free the result with
logmsg_free, but we can simplify this by pointing them
straight to unuse_commit_buffer. This is a slight layering
violation, in that we may be passing a buffer from (3).
However, since the end result is to free() anything except
(1), which is unlikely to change, and because this makes the
interface much simpler, it's a reasonable bending of the
rules.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For both of these sites, we already do the "fallback to
read_sha1_file" trick. But we can shorten the code by just
using get_commit_buffer.
Note that the error cases are slightly different when
read_sha1_file fails. get_commit_buffer will die() if the
object cannot be loaded, or is a non-commit.
For get_sha1_oneline, this will almost certainly never
happen, as we will have just called parse_object (and if it
does, it's probably worth complaining about).
For record_author_date, the new behavior is probably better;
we notify the user of the error instead of silently ignoring
it. And because it's used only for sorting by author-date,
somebody examining a corrupt repo can fallback to the
regular traversal order.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some call sites check commit->buffer to see whether we have
a cached buffer, and if so, do some work with it. In the
long run we may want to switch these code paths to make
their decision on a different boolean flag (because checking
the cache may get a little more expensive in the future).
But for now, we can easily support them by converting the
calls to use get_cached_commit_buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many sites look at commit->buffer to get more detailed
information than what is in the parsed commit struct.
However, we sometimes drop commit->buffer to save memory,
in which case the caller would need to read the object
afresh. Some callers do this (leading to duplicated code),
and others do not (which opens the possibility of a segfault
if somebody else frees the buffer).
Let's provide a pair of helpers, "get" and "unuse", that let
callers easily get the buffer. They will use the cached
buffer when possible, and otherwise load from disk using
read_sha1_file.
Note that we also need to add a "get_cached" variant which
returns NULL when we do not have a cached buffer. At first
glance this seems to defeat the purpose of "get", which is
to always provide a return value. However, some log code
paths actually use the NULL-ness of commit->buffer as a
boolean flag to decide whether to try printing the
commit. At least for now, we want to continue supporting
that use.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Right now this is just a one-liner, but abstracting it will
make it easier to change later.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This converts two lines into one at each caller. But more
importantly, it abstracts the concept of freeing the buffer,
which will make it easier to change later.
Note that we also need to provide a "detach" mechanism for a
tricky case in index-pack. We are passed a buffer for the
object generated by processing the incoming pack. If we are
not using --strict, we just calculate the sha1 on that
buffer and return, leaving the caller to free it. But if we
are using --strict, we actually attach that buffer to an
object, pass the object to the fsck functions, and then
detach the buffer from the object again (so that the caller
can free it as usual). In this case, we don't want to free
the buffer ourselves, but just make sure it is no longer
associated with the commit.
Note that we are making the assumption here that the
attach/detach process does not impact the buffer at all
(e.g., it is never reallocated or modified). That holds true
now, and we have no plans to change that. However, as we
abstract the commit_buffer code, this dependency becomes
less obvious. So when we detach, let's also make sure that
we get back the same buffer that we gave to the
commit_buffer code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not C. The code would break under mksh when 'pull.ff' is set:
$ git pull
/usr/lib/git-core/git-pull[67]: break: can't break
Already up-to-date.
Signed-off-by: Jacek Konieczny <jajcus@jajcus.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This simplifies the code, as logmsg_reencode handles the
reencoding for us in a single call. It also means we learn
logmsg_reencode's trick of pulling the buffer from disk when
commit->buffer is NULL (we currently just silently return!).
It is doubtful this matters in practice, though, as
sequencer operations would not generally turn off
save_commit_buffer.
Note that we may be fixing a bug here. The existing code
does:
if (same_encoding(to, from))
reencode_string(buf, to, from);
That probably should have been "!same_encoding".
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The return value from logmsg_reencode may be either a newly
allocated buffer or a pointer to the existing commit->buffer.
We would not want the caller to accidentally free() or
modify the latter, so let's mark it as const. We can cast
away the constness in logmsg_free, but only once we have
determined that it is a free-able buffer.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In both blame and merge-recursive, we sometimes create a
"fake" commit struct for convenience (e.g., to represent the
HEAD state as if we would commit it). By allocating
ourselves rather than using alloc_commit_node, we do not
properly set the "index" field of the commit. This can
produce subtle bugs if we then use commit-slab on the
resulting commit, as we will share the "0" index with
another commit.
We can fix this by using alloc_commit_node() to allocate.
Note that we cannot free the result, as it is part of our
commit allocator. However, both cases were already leaking
the allocated commit anyway, so there's nothing to fix up.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever we create a commit object via lookup_commit, we
give it a unique index to be used with the commit-slab API.
The theory is that any "struct commit" we create would
follow this code path, so any such struct would get an
index. However, callers could use alloc_commit_node()
directly (and get multiple commits with index 0).
Let's push the indexing into alloc_commit_node so that it's
hard for callers to get it wrong.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 2c1cbec (Use proper object allocators for unknown
object nodes too, 2007-04-16), added a special "any_object"
allocator, it never taught alloc_report to report on it. To
do so we need to add an extra type argument to the REPORT
macro, as that commit did for DEFINE_ALLOCATOR.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is not a good idea to strbuf_attach an arbitrary pointer
just because a function you are calling wants a strbuf.
Attaching implies a transfer of memory ownership; if anyone
were to modify or release the resulting strbuf, we would
free() the pointer, leading to possible problems:
1. Other users of the original pointer might access freed
memory.
2. The pointer might not be the start of a malloc'd
area, so calling free() on it in the first place would
be wrong.
In the two cases modified here, we are fortunate that nobody
touches the strbuf once it is attached, but it is an
accident waiting to happen. Since the previous commit,
commit_tree and friends take a pointer/buf pair, so we can
just do away with the strbufs entirely.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While strbufs are pretty common throughout our code, it is
more flexible for functions to take a pointer/len pair than
a strbuf. It's easy to turn a strbuf into such a pair (by
dereferencing its members), but less easy to go the other
way (you can strbuf_attach, but that has implications about
memory ownership).
This patch teaches commit_tree (and its associated callers
and sub-functions) to take such a pair for the commit
message rather than a strbuf. This makes passing the buffer
around slightly more verbose, but means we can get rid of
some dangerous strbuf_attach calls in the next patch.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config name is "writeBitmaps", so the internal variable
missing the plural is unnecessarily confusing to write.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config option to turn on bitmaps is read all the way
down in the plumbing of pack-objects. This makes it hard for
other options in the porcelain of repack to make decisions
based on the bitmap setting. For example,
repack.packKeptObjects tries to kick in by default only when
bitmaps are turned on. But it can't do so reliably because
it doesn't yet know whether we are using bitmaps.
This patch teaches repack to respect pack.writebitmaps. It
means we pass a redundant command-line flag to pack-objects,
but that's OK; it shouldn't affect the outcome.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit ee34a2b (repack: add `repack.packKeptObjects` config
var, 2014-03-03) added a flag which could duplicate kept
objects, but did not mean to turn it on by default. Instead,
the option is tied by default to the decision to write
bitmaps, like:
if (pack_kept_objects < 0)
pack_kept_objects = write_bitmap;
after which we expect pack_kept_objects to be a boolean 0 or
1. However, that assignment neglects that write_bitmap is
_also_ a tri-state with "-1" as the default, and with
neither option given, we accidentally turn the option on.
This patch is the minimal fix to restore the desired
behavior for the default state. Further patches will fix the
more complicated cases.
Note the update to t7700. It failed to turn on bitmaps,
meaning we were actually confirming the wrong behavior!
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fixed some minor typos in api-strbuf.txt: 'A' instead of 'An', 'have'
instead of 'has', a overlong line, and 'another' instead of 'an other'.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mistyped command line simply ignores "master" and ends up
showing two commits from the current HEAD:
$ git log -2master
because we feed "2master" to atoi() without making sure that the
whole string is parsed as an integer.
Use the strtol_i() helper function instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/t7810-grep.sh had its own test_config() function which served the
same purpose as the one in t/test-lib-functions.sh. Removed, all tests
pass.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These two commands are supposed to be equivalent:
$ git log --exclude=refs/notes/\* --all --no-merges --since=2.days |
git shortlog
$ git shortlog --exclude=refs/notes/\* --all --no-merges --since=2.days
However, the latter does not understand the ref-exclusion command
line option, even though other options understood by "log", such as
"--all" and "--no-merges", are understood.
This was because e7b432c5 (revision: introduce --exclude=<glob> to
tame wildcards, 2013-08-30) did not wire the new option fully to the
machinery. A new option understood by handle_revision_pseudo_opt()
must be told to handle_revision_opt() as well.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
test_cmp() is primarily meant to compare text files (and display the
difference for debug purposes).
Raw "cmp" is better suited to compare binary files (tar, zip, etc.).
On MinGW, test_cmp is a shell function mingw_test_cmp that tries to
read both files into environment, stripping CR characters (introduced
in commit 4d715ac0).
This function usually speeds things up, as fork is extremly slow on
Windows. But no wonder that this function is extremely slow and
sometimes even crashes when comparing large tar or zip files.
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "git update-index --cacheinfo" without any further
arguments results in a segfault rather than an error
message. Commit ec160ae (update-index: teach --cacheinfo a
new syntax "mode,sha1,path", 2014-03-23) added code to
examine the format of the argument, but forgot to handle the
NULL case.
Returning an error from the parser is enough, since we then
treat it as an old-style "--cacheinfo <mode> <sha1> <path>",
and complain that we have less than 3 arguments to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Discard the unnecessary 'nr_spaces' variable, remove 'strlen()' and
improve the 'if' structure. Switch to pointers instead of integers
to control the loop.
Slightly more rare occurrences of 'text \ ' with a backslash
in between spaces are handled correctly. Namely, the code in
7e2e4b37 (dir: ignore trailing spaces in exclude patterns, 2014-02-09)
does not reset 'last_space' when a backslash is encountered and the above
line stays intact as a result.
Add a test at the end of t/t0008-ignores.sh to exhibit this behavior.
Signed-off-by: Pasha Bolokhov <pasha.bolokhov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Whenever the hash table becomes too small then its size is increased,
the original part (and the added space) is zerod out using memset(),
and the table is rebuilt from scratch.
Simplify this proceess by returning the old memory using free() and
allocating the new buffer using xcalloc(), which already clears the
buffer for us. That way we avoid copying the old hash table contents
needlessly inside xrealloc().
While at it, use the first array member with sizeof instead of a
specific type. The old code used uint32_t and int, while index is
actually an array of int32_t. Their sizes are the same basically
everywhere, so it's not actually a problem, but the new code is
cleaner and doesn't have to be touched should the type be changed.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The array header is defined as:
static const char *header[MAX_HDR_PARSED] = {
"From","Subject","Date",
};
When looking for the index of a specfic string in that array, simply
use strcmp() instead of memcmp(). This avoids running over the end of
the string (e.g. with memcmp("Subject", "From", 7)) and gets rid of
magic string length constants.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The recent addition to the test case 'pull request format' interrupted
the single-quoted text, effectively adding a third argument to the
test_expect_success command. Since we do not have a prerequisite named
"pull request format", the test is skipped, no matter what. Additionally,
the file name argument to the grep command is missing. Fix both issues.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Diagnostic messages received on the sideband #2 from the server side
are sent to the standard error with ANSI terminal control sequence
"\033[K" that erases to the end of line appended at the end of each
line.
However, some programs (e.g. GitExtensions for Windows) read and
interpret and/or show the message without understanding the terminal
control sequences, resulting them to be shown to their end users.
To help these programs, squelch the control sequence when the
standard error stream is not being sent to a tty.
NOTE: I considered to cover the case that a pager has already been
started. But decided that is probably not worth worrying about here,
though, as we shouldn't be using a pager for commands that do network
communications (and if we do, omitting the magic line-clearing signal
is probably a sane thing to do).
Thanks-to: Erik Faye-Lund <kusmabite@gmail.com>
Thanks-to: Jeff King <peff@peff.net>
Signed-off-by: Michael Naumov <mnaoumov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The changes to make detection of endianness more portable had a bug
that breaks on (at least) Solaris x86.
The bug appears to be a simple copy/paste typo. It checks for
_BIG_ENDIAN and not _LITTLE_ENDIAN for both the case where we would
decide the system is big endian and little endian. Instead, the
second test should be for _LITTLE_ENDIAN and not _BIG_ENDIAN.
Two fixes were possible:
1. Change the negation order of the conditions in the second test.
2. Reverse the order of the conditions in the second test.
Use the second option so that the condition we expect is always a
positive check.
Signed-off-by: Ben Walton <bdwalton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As 0232852b, but for the push tests instead: this avoids a start_httpd
in the middle of the file, which fails under GIT_TEST_HTTPD=false.
Note that we have to munge the test in a few ways while
moving it:
1. We drop the `test -z "$GIT_TEST_HTTPD"` check; this is
too simplistic since 83d842d, and we should let
lib-httpd.sh handle it.
2. We have to port over some of the old setup from t5538.
3. In the final test, we no longer expect the extra commit
"1" built on top of "4". This was a side effect from an
earlier test in t5538 which was not ported over.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is expected to be the final maintenance release for 1.9 series,
merging the remaining fixes that are relevant and are already in 2.0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were originally removed by 0232852 (t5537: move
http tests out to t5539, 2014-02-13). However, they were
accidentally re-added in 1ddb4d7 (Merge branch
'nd/upload-pack-shallow', 2014-03-21).
This looks like an error in manual conflict resolution.
Here's what happened:
1. v1.9.0 shipped with the http tests in t5537.
2. We realized that this caused problems, and built
0232852 on top to move the tests to their own file.
This fix made it into v1.9.1.
3. We later had another fix in nd/upload-pack-shallow that
also touched t5537. It was built directly on v1.9.0.
When we merged nd/upload-pack-shallow to master, we got a
conflict; it was built on a version with the http tests, but
we had since removed them. The correct resolution was to
drop the http tests and keep the new ones, but instead we
kept everything.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mw/symlinks:
setup: fix windows path buffer over-stepping
setup: don't dereference in-tree symlinks for absolute paths
setup: add abspath_part_inside_repo() function
t0060: add tests for prefix_path when path begins with work tree
t0060: add test for prefix_path when path == work tree
t0060: add test for prefix_path on symlinks via absolute paths
t3004: add test for ls-files on symlinks via absolute paths
Re-word the section on "Updating a repository with git fetch" in the
user manual.
Various other minor fixes in the manual and glossary.
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
transport_helper_init passes the arguments in reverse order, passing the
size of a helper_data*, followed by the number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
parse_refspec_internal passes the arguments in reverse order, passing the
size of a refspec, followed by the number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
reflog-walk.c includes several calls to xcalloc() that pass the arguments
in reverse order.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
init_pack_revindex() passes the arguments in reverse order, passing the
size of a pack_revindex, followed by the number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
notes.c includes several calls to xcalloc() that pass the arguments in
reverse order.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
imap_open_store() passes the arguments in reverse order, passing the
size of an imap_store*, followed by the number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
http-push passes the arguments in reverse order, passing the size
of a repo, followed by the number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
diffstat_add() passes the arguments in reverse order, passing the
size of a diffstat_file*, followed by the number of diffstat_file* to
be allocated.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
xcalloc() takes two arguments: the number of elements and their size.
config.c includes several calls to xcalloc() that pass the arguments
in reverse order: the size of a struct lock_file*, followed by the
number to allocate.
Rearrange them so they are in the correct order.
Signed-off-by: Brian Gesiak <modocache@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
