This makes three functions and associated option structures from
builtin-grep available from other parts of the system.
* options to drive built-in grep engine is stored in struct
grep_opt;
* pattern strings and extended grep expressions are added to
struct grep_opt with append_grep_pattern();
* when finished calling append_grep_pattern(), call
compile_grep_patterns() to prepare for execution;
* call grep_buffer() to find matches in the in-core buffer.
This also adds an internal option "status_only" to grep_opt,
which suppresses any output from grep_buffer(). Callers of the
function as library can use it to check if there is a match
without producing any output.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also adds some very rudimentary support for the notion of packed
refs. HOWEVER! At this point it isn't used to actually look up a ref
yet, only for listing them (ie "for_each_ref()" and friends see the
packed refs, but none of the other single-ref lookup routines).
Note how we keep two separate lists: one for the loose refs, and one for
the packed refs we read. That's so that we can easily keep the two apart,
and read only one set or the other (and still always make sure that the
loose refs take precedence).
[ From this, it's not actually obvious why we'd keep the two separate
lists, but it's important to have the packed refs on their own list
later on, when I add support for looking up a single loose one.
For that case, we will want to read _just_ the packed refs in case the
single-ref lookup fails, yet we may end up needing the other list at
some point in the future, so keeping them separated is important ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/pack:
pack-objects: document --revs, --unpacked and --all.
pack-objects --unpacked=<existing pack> option.
pack-objects: further work on internal rev-list logic.
pack-objects: run rev-list equivalent internally.
Separate object listing routines out of rev-list
* jk/diff:
wt-status: remove extraneous newline from 'deleted:' output
git-status: document colorization config options
Teach runstatus about --untracked
git-commit.sh: convert run_status to a C builtin
Move color option parsing out of diff.c and into color.[ch]
diff: support custom callbacks for output
* jc/archive:
git-tar-tree: devolve git-tar-tree into a wrapper for git-archive
git-archive: inline default_parse_extra()
builtin-archive.c: rename remote_request() to extract_remote_arg()
upload-archive: monitor child communication more carefully.
Add sideband status report to git-archive protocol
Prepare larger packet buffer for upload-pack protocol.
Teach --exec to git-archive --remote
Add --verbose to git-archive
archive: force line buffered output to stderr
Use xstrdup instead of strdup in builtin-{tar,zip}-tree.c
Move sideband server side support into reusable form.
Move sideband client side support into reusable form.
archive: allow remote to have more formats than we understand.
git-archive: make compression level of ZIP archives configurable
Add git-upload-archive
git-archive: wire up ZIP format.
git-archive: wire up TAR format.
Add git-archive
$export_ok: If this variable evaluates to true it is checked
if a file with this name exists in the repository. If it
does not exist the repository cannot be viewed from gitweb.
(Similar to git-daemon-export-ok for git-daemon).
$strict_export: If this variable evaluates to true only
repositories listed on the project-list-page of gitweb can
be accessed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a new command, git-for-each-ref. You can have it iterate
over refs and have it output various aspects of the objects they
refer to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's kind of like "git peek-remote", but works only locally (and thus
avoids the whole overhead of git_connect()) and has some extra
verification features.
For example, it allows you to filter the results, and to choose whether
you want the tag dereferencing or not. You can also use it to just test
whether a particular ref exists.
For example:
git show-ref master
will show all references called "master", whether tags or heads or
anything else, and regardless of how deep in the reference naming
hierarchy they are (so it would show "refs/heads/master" but also
"refs/remote/other-repo/master").
When using the "--verify" flag, the command requires an exact ref path:
git show-ref --verify refs/heads/master
will only match the exact branch called "master".
If nothing matches, show-ref will return an error code of 1, and in the
case of verification, it will show an error message.
For scripting, you can ask it to be quiet with the "--quiet" flag, which
allows you to do things like
git-show-ref --quiet --verify -- "refs/heads/$headname" ||
echo "$headname is not a valid branch"
to check whether a particular branch exists or not (notice how we don't
actually want to show any results, and we want to use the full refname for
it in order to not trigger the problem with ambiguous partial matches).
To show only tags, or only proper branch heads, use "--tags" and/or
"--heads" respectively (using both means that it shows tags _and_ heads,
but not other random references under the refs/ subdirectory).
To do automatic tag object dereferencing, use the "-d" or "--dereference"
flag, so you can do
git show-ref --tags --dereference
to get a listing of all tags together with what they dereference.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/sideband:
Prepare larger packet buffer for upload-pack protocol.
Move sideband server side support into reusable form.
Move sideband client side support into reusable form.
get_sha1_hex() micro-optimization
This moves the receiver side of the sideband support from
fetch-clone.c to sideband.c and its header file, so that
archiver protocol can use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command implements the git archive protocol on the server
side. This command is not intended to be used by the end user.
Underlying git-archive command line options are sent over the
protocol from "git-archive --remote=...", just like upload-tar
currently does with "git-tar-tree=...".
As for "git-archive" command implementation, this new command
does not execute any existing "git-{tar,zip}-tree" but rely
on the archive API defined by "git-archive" patch. Hence we
get 2 good points:
- "git-archive" and "git-upload-archive" share all option
parsing code.
- All kind of git-upload-{tar,zip} can be deprecated.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.
Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.
- The first one is used to parse 'extra' parameters which have
signification only for the specific archiver. That would allow
different archive backends to have different kind of options.
- The second one is used to ask to an archive backend to build
the archive given some already resolved parameters.
The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?
It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.
The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:
$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD
We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This creates a new git-runstatus which should do roughly the same thing
as the run_status function from git-commit.sh. Except for color support,
the main focus has been to keep the output identical, so that it can be
verified as correct and then used as a C platform for other improvements to
the status printing code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Create a separate file, list-objects.c, and move object listing
routines from rev-list to it. The next round will use it in
pack-objects directly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now if GIT_TRACE is set to an integer value greater than 1
and lower than 10, we interpret this as an open fd value
and we trace into it. Note that this behavior is not
compatible with the previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
It's now possible to run the tests like this:
GIT_TRACE=9 make test 9>/var/tmp/trace.log
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We checked NO_SETENV instead of NO_UNSETENV to decide if unsetenv
is available.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/c-merge-recursive: (21 commits)
discard_cache(): discard index, even if no file was mmap()ed
merge-recur: do not die unnecessarily
merge-recur: try to merge older merge bases first
merge-recur: if there is no common ancestor, fake empty one
merge-recur: do not setenv("GIT_INDEX_FILE")
merge-recur: do not call git-write-tree
merge-recursive: fix rename handling
.gitignore: git-merge-recur is a built file.
merge-recur: virtual commits shall never be parsed
merge-recur: use the unpack_trees() interface instead of exec()ing read-tree
merge-recur: fix thinko in unique_path()
Makefile: git-merge-recur depends on xdiff libraries.
merge-recur: Explain why sha_eq() and struct stage_data cannot go
merge-recur: Cleanup last mixedCase variables...
merge-recur: Fix compiler warning with -pedantic
merge-recur: Remove dead code
merge-recur: Get rid of debug code
merge-recur: Convert variable names to lower_case
Cumulative update of merge-recursive in C
recur vs recursive: help testing without touching too many stuff.
...
This is an evil merge that removes TEST script from the toplevel.
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The little helper write_or_die() won't come back with bad news about
full disks or broken pipes. It either succeeds or terminates the
program, making additional error handling unnecessary.
This patch adds the new function and uses it to replace two similar
ones (the one in tar-tree originally has been copied from cat-file
btw.). I chose to add the fd parameter which both lacked to make
write_or_die() just as flexible as write() and thus suitable for
lib-ification.
There is a regression: error messages emitted by this function don't
show the program name, while the replaced two functions did. That's
acceptable, I think; a lot of other functions do the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/racy:
Remove the "delay writing to avoid runtime penalty of racy-git avoidance"
Add check program "git-check-racy"
Documentation/technical/racy-git.txt
avoid nanosleep(2)
From 31e4de9f22a3b17d4ad0ac800132e4e1a0a15006 Mon Sep 17 00:00:00 2001
From: David Rientjes <rientjes@google.com>
Date: Tue, 15 Aug 2006 11:43:04 -0700
Subject: [PATCH] gitweb: Show project's git URL on summary page
Add support for showing multiple clone/fetch git URLs for project on
a summary page. URL for project is created from base URL and project
name.
For example for XMMS2 project (xmms.se) the git base URL would be
git://git.xmms.se/xmms2.
With corrections from David Rientjes <rientjes@google.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This will help counting the racily clean paths, but it should be
useless for daily use. Do not even enable it in the makefile.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
finish_connect(): thinkofix
git-mv: succeed even if source is a prefix of destination
Solaris does not support C99 format strings before version 10
- Add the CFLAGS variable to config.mak.in to override the Makefile's
default, which is gcc-specific and won't work with Sun CC.
- Prefer "cc" over "gcc", because Pasky's Git.pm will not compile with gcc
on Solaris at all. On Linux and the free BSDs "cc" is linked to "gcc"
anyway.
- Set correct flag to generate position-independent code.
- Add "-xO3" (= use default optimization level) to CFLAGS.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (166 commits)
git-apply --binary: clean up and prepare for --reverse
Fix detection of ipv6 on Solaris
Look for sockaddr_storage in sys/socket.h
Solaris has strlcpy() at least since version 8
git-apply --reverse: simplify reverse option.
t4116 apply --reverse test
Make sha1flush void and remove conditional return.
Make upload_pack void and remove conditional return.
Make track_tree_refs void.
Make pack_objects void.
Make fsck_dir void.
Make checkout_all void.
Make show_entry void
Make pprint_tag void and cleans up call in cmd_cat_file.
Remove combine-diff.c::uninteresting()
read-cache.c cleanup
http-push.c cleanup
diff.c cleanup
builtin-push.c cleanup
builtin-grep.c cleanup
...
I've always found difficult to figure out git URL for clone from
gitweb URL because git:// and http:// are different on many site
including kernel.org.
I've found this enhancement at http://dev.laptop.org/git when I was on
git channel, and thought that it'd be nice if all public gitweb site
show it's git URL on its page.
This patch allow us to change the home link string. The current
default is "projects" as we all see on gitweb now.
ie. kernel.org might set this variable to "git://git.kernel.org/pub/scm/"
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Convert git-verify-pack to a builtin command. Also rename ac to argc
and av to argv for consistancy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When configure is interrupted in the middle it leaves
config.mak.append behind. Add it to .gitignore and make sure
$(MAKE) clean removes it.
Also earlier .gitignore listed config.mak.in which is a tracked
file. Fix it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
While at it fill git version information in configure.ac
configure target needs autoconf, of course.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the build procedure for built-in commands by:
- generating mostly redundant definition of BUILT_INS from
BUILTIN_OBJS in the Makefile,
- renaming a few files to make the above possible, and
- sorting the built-in command table in git.c.
It might be a good idea to binary search (or perfect hash) the built-in
command table, but that can be done later when somebody feels like.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes it easier to run gitweb/gitweb.perl without token substitution.
Using @@ makes Perl emit "unintended interpolation" warnings.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Configuration will first be taken from variables inside the gitweb.cgi
script, which in turn come from the Makefile. Afterwards, the contents of
GITWEB_CONFIG are read, overriding the builtin defaults.
This should eliminate the need for editing the gitweb script at all. Users
should edit the Makefile and/or add a config file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The NO_C99_FORMAT macro allows compilers that lack support for the
ll,hh,j,z,t size specifiers (eg. gcc 2.95.2) to adapt the code to avoid
runtime errors in the formatted IO functions.
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Do not use $(call) for 'shell quoting' paths, and pass DESTDIR down
to the templates makefile.
[jc: we have fixed the main Makefile long time ago, but somehow
forgot to apply the same fix to templates Makefile.]
Signed-off-by: Ramsay Allan Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the normal web server instead of the CGI to provide the git logo,
just like the gitweb.css.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Generate gitweb/gitweb.cgi to reduce the need to patch gitweb.cgi
by the end user. The GIT installation directory is already known
by the Makefile, and can be inserted directly into gitweb.
All other gitweb configuration parameters can now be specified by
providing GITWEB_* variables while building GIT. These are described
in gitweb/README.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/read-tree: (107 commits)
read-tree: move merge functions to the library
read-trees: refactor the unpack_trees() part
tar-tree: illustrate an obscure feature better
git.c: allow alias expansion without a git directory
setup_git_directory_gently: do not barf when GIT_DIR is given.
Build on Debian GNU/kFreeBSD
Call setup_git_directory() much earlier
Call setup_git_directory() early
Display an error from update-ref if target ref name is invalid.
Fix http-fetch
t4103: fix binary patch application test.
git-apply -R: binary patches are irreversible for now.
Teach git-apply about '-R'
Makefile: ssh-pull.o depends on ssh-fetch.c
log and diff family: honor config even from subdirectories
git-reset: detect update-ref error and report it.
lost-found: use fsck-objects --full
Teach git-http-fetch the --stdin switch
Teach git-local-fetch the --stdin switch
Make pull() support fetching multiple targets at once
...
Basically, the options are passed by a struct unpack_trees_options now.
That's all.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Patch from Petr Salinger to make the build process detect and support the
Debian GNU/kFreeBSD architecture, see
http://bugs.debian.org/380209
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jn/make:
Set datarootdir in config.mak.in
Quote all calls to GIT_CONF_APPEND_LINE
Typofix in configure.ac comment.
configure.ac vertical whitespace usage cleanup
autoconf: Checks for some programs
autoconf: Checks for libraries
autoconf: Checks for some library functions.
autoconf: Checks for typedefs, structures, and compiler characteristics.
autoconf: Preparing the way for autodetection
Copy description of build configuration variables to configure.ac
Teach make clean about configure and autoconf
autoconf: Use autoconf to write installation directories to config.mak.autogen
This also moves add_file_to_index() to read-cache.c. Oh, and while
touching builtin-add.c, it also removes a duplicate git_config() call.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not everybody installs git to /usr/bin/git.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It may be desirable for the compiler to disable linking against Fink
or DarwinPorts, especially if both are installed on the system and
the user wants GIT to be linked specifically to only one of them.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is just an update for people being interested. Alex and me were
busy with that project for a few days now. While it has progressed nicely,
there are quite a couple TODOs in merge-recursive.c, just search for "TODO".
For impatient people: yes, it passes all the tests, and yes, according
to the evil test Alex did, it is faster than the Python script.
But no, it is not yet finished. Biggest points are:
- there are still three external calls
- in the end, it should not be necessary to write the index more than once
(just before exiting)
- a lot of things can be refactored to make the code easier and shorter
BTW we cannot just plug in git-merge-tree yet, because git-merge-tree
does not handle renames at all.
This patch is meant for testing, and as such,
- it compile the program to git-merge-recur
- it adjusts the scripts and tests to use git-merge-recur instead of
git-merge-recursive
- it provides "TEST", a script to execute the tests regarding -recursive
- it inlines the changes to read-cache.c (read_cache_from(), discard_cache()
and refresh_cache_entry())
Brought to you by Alex Riesen and Dscho
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/merge-tree:
Improved three-way blob merging code
Prepare "git-merge-tree" for future work
xdiff: generate "anti-diffs" aka what is common to two files
* ew/svn:
Fix some doubled word typos
Typofix in Makefile comment.
Makefile: export NO_SVN_TESTS
git-svn: migrate out of contrib (follow-up)
git-svn: migrate out of contrib
This actually removes the objects to be pruned, unless you specify "-n"
(at which point it will just tell you which files it would prune).
This doesn't do the pack-file pruning that the shell-script used to do,
but if somebody really wants to, they could add it easily enough. I wonder
how useful it is, though, considering that "git repack -a -d" is just a
lot more efficient and generates a better end result.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Traditionally 'i' and 'a' commands to sed have been unfriendly
with make, primarily because different make implementations did
unexpected things to backslashes at the end of lines. So work
it around by not using 'i' command.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some GIT's shell script are using bare 'perl' for perl invocation.
Use @@PERL@@ symbol and replace it with PERL_PATH_SQ everywhere.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some implementations of sed (like HP-UX one) mandate a space between 'r'
and 'rfile'.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this patch, it really is not sufficient to define NO_SVN_TESTS
in config.mak or the Makefile.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* ew/instaweb:
instaweb: fix unportable ';' usage in sed
Makefile: replace ugly and unportable sed invocation
Add git-instaweb, instantly browse the working repo with gitweb
gitweb: Declare global variables with "our"
gitweb: Enable tree (directory) history display
gitweb: optimize per-file history generation
* jc/sha1:
A better-scheduled PPC SHA-1 implementation.
test-sha1: test hashing large buffer
Makefile: add framework to verify and bench sha1 implementations.
This makes the Git perl scripts check $GITPERLLIB instead of
$RUNNING_GIT_TESTS, which makes more sense if you are setting up your shell
environment to use a non-installed Git instance.
It also weeds out the @INC munging from the individual scripts and makes
Makefile add it during the .perl files processing, so that we can change
just a single place when we modify this shared logic. It looks ugly in the
scripts, too. ;-)
And instead of doing arcane things with the @INC array, we just do 'use lib'
instead, which is essentialy the same thing anyway.
I first want to do three separate patches but it turned out that it's quite
a lot neater when bundled together, so I hope it's ok.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although our "git-%$X:" implicit target had dependency on
$(GITLIBS) which included xdiff/lib.a, git-http-{fetch,push} had
their own building rules and with an obsolete dependency on
$(LIB_FILES). Update the rules to depend on $(GITLIBS), to make
parallel build work correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
On some platforms, Git.xs refuses to link with the rest of git
unless the latter is compiled with -fPIC, and we have USE_PIC
control in the Makefile for the user to set it. At least we
know x86-64 is such, so set it in the Makefile.
The original suggestion by Marco Roeland conservatively did this
only for Linux x86-64, but let's keep the Makefile simple and if
it breaks somebody let them holler.
Signed-off-by: Junio C Hamano <junkio@cox.net>
dst_ on #git reported that on Solaris 9, Perl was built by Sun CC
and perl/ is therefore being built with it as well, while the rest
of Git is built with gcc. The problem (the first one visible, anyway)
is that we passed perl/ even various gcc-specific options. This
separates those to a special variable.
This is not really meant for an application yet since it's not clear
if it will alone help anything.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Solaris' /bin/sh does not support $( )-style command substitution
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- We passed our own *.a archives as LIBS to the submake that runs
in perl/; separate LIBS and EXTLIBS and pass the latter which
tells what the system libraries are used.
- The quoting of preprocesor symbol definitions passed down to
perl/ submake was loose and we lost double quotes around
include directives. Use *_SQ to quote them properly.
- The installation location of perl/ submake is not
architecture neutral anymore, so use SITEARCH instead of
SITELIB.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When perl/Makefile is stale with respect to perl/Makefile.PL, it
prevents "make clean" from completing which is quite irritating.
Fix it by calling subdirectory make clean twice as needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch introduces a very basic and barebone Git.pm module
with a sketch of how the generic interface would look like;
most functions are missing, but this should give some good base.
I will continue expanding it.
Most desirable now is more careful error reporting, generic_in() for feeding
input to Git commands and the repository() constructor doing some poking
with git-rev-parse to get the git directory and subdirectory prefix.
Those three are basically the prerequisities for converting git-mv.
I will send them as follow-ups to this patch.
Currently Git.pm just wraps up exec()s of Git commands, but even that
is not trivial to get right and various Git perl scripts do it in
various inconsistent ways. In addition to Git.pm, there is now also
Git.xs which provides barebone Git.xs for directly interfacing with
libgit.a, and as an example providing the hash_object() function using
libgit.
This adds the Git module, integrates it to the build system and as
an example converts the git-fmt-merge-msg.perl script to it (the result
is not very impressive since its advantage is not quite apparent in this
one, but I just picked up the simplest Git user around).
Compared to v3, only very minor things were fixed in this patch (some
whitespaces, a missing export, tiny bug in git-fmt-merge-msg.perl);
at first I wanted to post them as a separate patch but since this
is still only in pu, I decided that it will be cleaner to just resend
the patch.
My current working state is available all the time at
http://pasky.or.cz/~xpasky/git-perl/Git.pm
and an irregularily updated API documentation is at
http://pasky.or.cz/~xpasky/git-perl/Git.html
Many thanks to Jakub Narebski, Junio and others for their feedback.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
